Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 29 10月, 2019 1 次提交
    • F
      CPX: x86/cpufeatures: Enumerate the new AVX512 BFLOAT16 instructions · 61c73dc7
      由 Fenghua Yu 提交于 
      commit b302e4b176d00e1cbc80148c5d0aee36751f7480 upstream.

AVX512 BFLOAT16 instructions support 16-bit BFLOAT16 floating-point
format (BF16) for deep learning optimization.

BF16 is a short version of 32-bit single-precision floating-point
format (FP32) and has several advantages over 16-bit half-precision
floating-point format (FP16). BF16 keeps FP32 accumulation after
multiplication without loss of precision, offers more than enough
range for deep learning training tasks, and doesn't need to handle
hardware exception.

AVX512 BFLOAT16 instructions are enumerated in CPUID.7.1:EAX[bit 5]
AVX512_BF16.

CPUID.7.1:EAX contains only feature bits. Reuse the currently empty
word 12 as a pure features word to hold the feature bits including
AVX512_BF16.

Detailed information of the CPUID bit and AVX512 BFLOAT16 instructions
can be found in the latest Intel Architecture Instruction Set Extensions
and Future Features Programming Reference.

 [ bp: Check CPUID(7) subleaf validity before accessing subleaf 1. ]
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "Chang S. Bae" <chang.seok.bae@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <namit@vmware.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Cc: "Sean J Christopherson" <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86 <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560794416-217638-3-git-send-email-fenghua.yu@intel.comSigned-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
      61c73dc7
  3. 07 8月, 2019 4 次提交
    • T
      x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS · b88241ae
      由 Thomas Gleixner 提交于 
      commit f36cf386e3fec258a341d446915862eded3e13d8 upstream

Intel provided the following information:

 On all current Atom processors, instructions that use a segment register
 value (e.g. a load or store) will not speculatively execute before the
 last writer of that segment retires. Thus they will not use a
 speculatively written segment value.

That means on ATOMs there is no speculation through SWAPGS, so the SWAPGS
entry paths can be excluded from the extra LFENCE if PTI is disabled.

Create a separate bug flag for the through SWAPGS speculation and mark all
out-of-order ATOMs and AMD/HYGON CPUs as not affected. The in-order ATOMs
are excluded from the whole mitigation mess anyway.
Reported-by: NAndrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NTyler Hicks <tyhicks@canonical.com>
Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b88241ae
    • J
      x86/speculation: Enable Spectre v1 swapgs mitigations · 23e7a7b3
      由 Josh Poimboeuf 提交于 
      commit a2059825986a1c8143fd6698774fa9d83733bb11 upstream

The previous commit added macro calls in the entry code which mitigate the
Spectre v1 swapgs issue if the X86_FEATURE_FENCE_SWAPGS_* features are
enabled.  Enable those features where applicable.

The mitigations may be disabled with "nospectre_v1" or "mitigations=off".

There are different features which can affect the risk of attack:

- When FSGSBASE is enabled, unprivileged users are able to place any
  value in GS, using the wrgsbase instruction.  This means they can
  write a GS value which points to any value in kernel space, which can
  be useful with the following gadget in an interrupt/exception/NMI
  handler:

	if (coming from user space)
		swapgs
	mov %gs:<percpu_offset>, %reg1
	// dependent load or store based on the value of %reg
	// for example: mov %(reg1), %reg2

  If an interrupt is coming from user space, and the entry code
  speculatively skips the swapgs (due to user branch mistraining), it
  may speculatively execute the GS-based load and a subsequent dependent
  load or store, exposing the kernel data to an L1 side channel leak.

  Note that, on Intel, a similar attack exists in the above gadget when
  coming from kernel space, if the swapgs gets speculatively executed to
  switch back to the user GS.  On AMD, this variant isn't possible
  because swapgs is serializing with respect to future GS-based
  accesses.

  NOTE: The FSGSBASE patch set hasn't been merged yet, so the above case
	doesn't exist quite yet.

- When FSGSBASE is disabled, the issue is mitigated somewhat because
  unprivileged users must use prctl(ARCH_SET_GS) to set GS, which
  restricts GS values to user space addresses only.  That means the
  gadget would need an additional step, since the target kernel address
  needs to be read from user space first.  Something like:

	if (coming from user space)
		swapgs
	mov %gs:<percpu_offset>, %reg1
	mov (%reg1), %reg2
	// dependent load or store based on the value of %reg2
	// for example: mov %(reg2), %reg3

  It's difficult to audit for this gadget in all the handlers, so while
  there are no known instances of it, it's entirely possible that it
  exists somewhere (or could be introduced in the future).  Without
  tooling to analyze all such code paths, consider it vulnerable.

  Effects of SMAP on the !FSGSBASE case:

  - If SMAP is enabled, and the CPU reports RDCL_NO (i.e., not
    susceptible to Meltdown), the kernel is prevented from speculatively
    reading user space memory, even L1 cached values.  This effectively
    disables the !FSGSBASE attack vector.

  - If SMAP is enabled, but the CPU *is* susceptible to Meltdown, SMAP
    still prevents the kernel from speculatively reading user space
    memory.  But it does *not* prevent the kernel from reading the
    user value from L1, if it has already been cached.  This is probably
    only a small hurdle for an attacker to overcome.

Thanks to Dave Hansen for contributing the speculative_smap() function.

Thanks to Andrew Cooper for providing the inside scoop on whether swapgs
is serializing on AMD.

[ tglx: Fixed the USER fence decision and polished the comment as suggested
  	by Dave Hansen ]
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      23e7a7b3
    • F
      x86/cpufeatures: Combine word 11 and 12 into a new scattered features word · b5dd7f61
      由 Fenghua Yu 提交于 
      commit acec0ce081de0c36459eea91647faf99296445a3 upstream

It's a waste for the four X86_FEATURE_CQM_* feature bits to occupy two
whole feature bits words. To better utilize feature words, re-define
word 11 to host scattered features and move the four X86_FEATURE_CQM_*
features into Linux defined word 11. More scattered features can be
added in word 11 in the future.

Rename leaf 11 in cpuid_leafs to CPUID_LNX_4 to reflect it's a
Linux-defined leaf.

Rename leaf 12 as CPUID_DUMMY which will be replaced by a meaningful
name in the next patch when CPUID.7.1:EAX occupies world 12.

Maximum number of RMID and cache occupancy scale are retrieved from
CPUID.0xf.1 after scattered CQM features are enumerated. Carve out the
code into a separate function.

KVM doesn't support resctrl now. So it's safe to move the
X86_FEATURE_CQM_* features to scattered features word 11 for KVM.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Babu Moger <babu.moger@amd.com>
Cc: "Chang S. Bae" <chang.seok.bae@intel.com>
Cc: "Sean J Christopherson" <sean.j.christopherson@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86 <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560794416-217638-2-git-send-email-fenghua.yu@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b5dd7f61
    • B
      x86/cpufeatures: Carve out CQM features retrieval · 16ad0b63
      由 Borislav Petkov 提交于 
      commit 45fc56e629caa451467e7664fbd4c797c434a6c4 upstream

... into a separate function for better readability. Split out from a
patch from Fenghua Yu <fenghua.yu@intel.com> to keep the mechanical,
sole code movement separate for easy review.

No functional changes.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: x86@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      16ad0b63
  5. 31 7月, 2019 1 次提交
  7. 26 7月, 2019 2 次提交
  9. 03 7月, 2019 3 次提交
    • R
      x86/resctrl: Prevent possible overrun during bitmap operations · 32746032
      由 Reinette Chatre 提交于 
      commit 32f010deab575199df4ebe7b6aec20c17bb7eccd upstream.

While the DOC at the beginning of lib/bitmap.c explicitly states that
"The number of valid bits in a given bitmap does _not_ need to be an
exact multiple of BITS_PER_LONG.", some of the bitmap operations do
indeed access BITS_PER_LONG portions of the provided bitmap no matter
the size of the provided bitmap.

For example, if find_first_bit() is provided with an 8 bit bitmap the
operation will access BITS_PER_LONG bits from the provided bitmap. While
the operation ensures that these extra bits do not affect the result,
the memory is still accessed.

The capacity bitmasks (CBMs) are typically stored in u32 since they
can never exceed 32 bits. A few instances exist where a bitmap_*
operation is performed on a CBM by simply pointing the bitmap operation
to the stored u32 value.

The consequence of this pattern is that some bitmap_* operations will
access out-of-bounds memory when interacting with the provided CBM.

This same issue has previously been addressed with commit 49e00eee
("x86/intel_rdt: Fix out-of-bounds memory access in CBM tests")
but at that time not all instances of the issue were fixed.

Fix this by using an unsigned long to store the capacity bitmask data
that is passed to bitmap functions.

Fixes: e6519011 ("x86/intel_rdt: Introduce "bit_usage" to display cache allocations details")
Fixes: f4e80d67 ("x86/intel_rdt: Resctrl files reflect pseudo-locked information")
Fixes: 95f0b77e ("x86/intel_rdt: Initialize new resource group with sane defaults")
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/58c9b6081fd9bf599af0dfc01a6fdd335768efef.1560975645.git.reinette.chatre@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      32746032
    • T
      x86/microcode: Fix the microcode load on CPU hotplug for real · 1746dc52
      由 Thomas Gleixner 提交于 
      commit 5423f5ce5ca410b3646f355279e4e937d452e622 upstream.

A recent change moved the microcode loader hotplug callback into the early
startup phase which is running with interrupts disabled. It missed that
the callbacks invoke sysfs functions which might sleep causing nice 'might
sleep' splats with proper debugging enabled.

Split the callbacks and only load the microcode in the early startup phase
and move the sysfs handling back into the later threaded and preemptible
bringup phase where it was before.

Fixes: 78f4e932f776 ("x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906182228350.1766@nanos.tec.linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1746dc52
    • A
      x86/speculation: Allow guests to use SSBD even if host does not · 690049ed
      由 Alejandro Jimenez 提交于 
      commit c1f7fec1eb6a2c86d01bc22afce772c743451d88 upstream.

The bits set in x86_spec_ctrl_mask are used to calculate the guest's value
of SPEC_CTRL that is written to the MSR before VMENTRY, and control which
mitigations the guest can enable.  In the case of SSBD, unless the host has
enabled SSBD always on mode (by passing "spec_store_bypass_disable=on" in
the kernel parameters), the SSBD bit is not set in the mask and the guest
can not properly enable the SSBD always on mitigation mode.

This has been confirmed by running the SSBD PoC on a guest using the SSBD
always on mitigation mode (booted with kernel parameter
"spec_store_bypass_disable=on"), and verifying that the guest is vulnerable
unless the host is also using SSBD always on mode. In addition, the guest
OS incorrectly reports the SSB vulnerability as mitigated.

Always set the SSBD bit in x86_spec_ctrl_mask when the host CPU supports
it, allowing the guest to use SSBD whether or not the host has chosen to
enable the mitigation in any of its modes.

Fixes: be6fcb54 ("x86/bugs: Rework spec_ctrl base and mask logic")
Signed-off-by: NAlejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NLiam Merwick <liam.merwick@oracle.com>
Reviewed-by: NMark Kanda <mark.kanda@oracle.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: bp@alien8.de
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1560187210-11054-1-git-send-email-alejandro.j.jimenez@oracle.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      690049ed
  11. 25 6月, 2019 1 次提交
  13. 22 6月, 2019 1 次提交
    • F
      x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor · a35e7822
      由 Frank van der Linden 提交于 
      [ Upstream commit 2ac44ab608705948564791ce1d15d43ba81a1e38 ]

For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.

However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:

	unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)

	Call Trace:
	boost_set_msr+0x50/0x80 [acpi_cpufreq]
	cpuhp_invoke_callback+0x86/0x560
	sort_range+0x20/0x20
	cpuhp_thread_fun+0xb0/0x110
	smpboot_thread_fn+0xef/0x160
	kthread+0x113/0x130
	kthread_create_worker_on_cpu+0x70/0x70
	ret_from_fork+0x35/0x40

To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.
Signed-off-by: NFrank van der Linden <fllinden@amazon.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes: 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      a35e7822
  15. 19 6月, 2019 2 次提交
    • P
      x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled · e93ce57f
      由 Prarit Bhargava 提交于 
      commit c7563e62a6d720aa3b068e26ddffab5f0df29263 upstream.

Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and
executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in
a NULL pointer dereference on systems which do not have local MBM support
enabled..

BUG: kernel NULL pointer dereference, address: 0000000000000020
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2
Workqueue: events mbm_handle_overflow
RIP: 0010:mbm_handle_overflow+0x150/0x2b0

Only enter the bandwith update loop if the system has local MBM enabled.

Fixes: de73f38f ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth")
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190610171544.13474-1-prarit@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e93ce57f
    • B
      x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback · ecec31ce
      由 Borislav Petkov 提交于 
      commit 78f4e932f7760d965fb1569025d1576ab77557c5 upstream.

Adric Blake reported the following warning during suspend-resume:

  Enabling non-boot CPUs ...
  x86: Booting SMP configuration:
  smpboot: Booting Node 0 Processor 1 APIC 0x2
  unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \
   at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20)
  Call Trace:
   intel_set_tfa
   intel_pmu_cpu_starting
   ? x86_pmu_dead_cpu
   x86_pmu_starting_cpu
   cpuhp_invoke_callback
   ? _raw_spin_lock_irqsave
   notify_cpu_starting
   start_secondary
   secondary_startup_64
  microcode: sig=0x806ea, pf=0x80, revision=0x96
  microcode: updated to revision 0xb4, date = 2019-04-01
  CPU1 is up

The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated
by microcode. The log above shows that the microcode loader callback
happens after the PMU restoration, leading to the conjecture that
because the microcode hasn't been updated yet, that MSR is not present
yet, leading to the #GP.

Add a microcode loader-specific hotplug vector which comes before
the PERF vectors and thus executes earlier and makes sure the MSR is
present.

Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: NAdric Blake <promarbler14@gmail.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: x86@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ecec31ce
  17. 31 5月, 2019 3 次提交
    • Y
      x86/mce: Handle varying MCA bank counts · 75a96196
      由 Yazen Ghannam 提交于 
      [ Upstream commit 006c077041dc73b9490fffc4c6af5befe0687110 ]

Linux reads MCG_CAP[Count] to find the number of MCA banks visible to a
CPU. Currently, this number is the same for all CPUs and a warning is
shown if there is a difference. The number of banks is overwritten with
the MCG_CAP[Count] value of each following CPU that boots.

According to the Intel SDM and AMD APM, the MCG_CAP[Count] value gives
the number of banks that are available to a "processor implementation".
The AMD BKDGs/PPRs further clarify that this value is per core. This
value has historically been the same for every core in the system, but
that is not an architectural requirement.

Future AMD systems may have different MCG_CAP[Count] values per core,
so the assumption that all CPUs will have the same MCG_CAP[Count] value
will no longer be valid.

Also, the first CPU to boot will allocate the struct mce_banks[] array
using the number of banks based on its MCG_CAP[Count] value. The machine
check handler and other functions use the global number of banks to
iterate and index into the mce_banks[] array. So it's possible to use an
out-of-bounds index on an asymmetric system where a following CPU sees a
MCG_CAP[Count] value greater than its predecessors.

Thus, allocate the mce_banks[] array to the maximum number of banks.
This will avoid the potential out-of-bounds index since the value of
mca_cfg.banks is capped to MAX_NR_BANKS.

Set the value of mca_cfg.banks equal to the max of the previous value
and the value for the current CPU. This way mca_cfg.banks will always
represent the max number of banks detected on any CPU in the system.

This will ensure that all CPUs will access all the banks that are
visible to them. A CPU that can access fewer than the max number of
banks will find the registers of the extra banks to be read-as-zero.

Furthermore, print the resulting number of MCA banks in use. Do this in
mcheck_late_init() so that the final value is printed after all CPUs
have been initialized.

Finally, get bank count from target CPU when doing injection with mce-inject
module.

 [ bp: Remove out-of-bounds example, passify and cleanup commit message. ]
Signed-off-by: NYazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20180727214009.78289-1-Yazen.Ghannam@amd.comSigned-off-by: NSasha Levin <sashal@kernel.org>
      75a96196
    • T
      x86/mce: Fix machine_check_poll() tests for error types · 3d036cba
      由 Tony Luck 提交于 
      [ Upstream commit f19501aa07f18268ab14f458b51c1c6b7f72a134 ]

There has been a lurking "TBD" in the machine check poll routine ever
since it was first split out from the machine check handler. The
potential issue is that the poll routine may have just begun a read from
the STATUS register in a machine check bank when the hardware logs an
error in that bank and signals a machine check.

That race used to be pretty small back when machine checks were
broadcast, but the addition of local machine check means that the poll
code could continue running and clear the error from the bank before the
local machine check handler on another CPU gets around to reading it.

Fix the code to be sure to only process errors that need to be processed
in the poll code, leaving other logged errors alone for the machine
check handler to find and process.

 [ bp: Massage a bit and flip the "== 0" check to the usual !(..) test. ]

Fixes: b79109c3 ("x86, mce: separate correct machine check poller and fatal exception handler")
Fixes: ed7290d0 ("x86, mce: implement new status bits")
Reported-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20190312170938.GA23035@agluck-deskSigned-off-by: NSasha Levin <sashal@kernel.org>
      3d036cba
    • B
      x86/microcode: Fix the ancient deprecated microcode loading method · a07de9b9
      由 Borislav Petkov 提交于 
      [ Upstream commit 24613a04ad1c0588c10f4b5403ca60a73d164051 ]

Commit

  2613f36e ("x86/microcode: Attempt late loading only when new microcode is present")

added the new define UCODE_NEW to denote that an update should happen
only when newer microcode (than installed on the system) has been found.

But it missed adjusting that for the old /dev/cpu/microcode loading
interface. Fix it.

Fixes: 2613f36e ("x86/microcode: Attempt late loading only when new microcode is present")
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jann Horn <jannh@google.com>
Link: https://lkml.kernel.org/r/20190405133010.24249-3-bp@alien8.deSigned-off-by: NSasha Levin <sashal@kernel.org>
      a07de9b9
  19. 15 5月, 2019 18 次提交
  21. 08 5月, 2019 1 次提交
  23. 27 4月, 2019 1 次提交
  25. 20 4月, 2019 1 次提交
  27. 14 3月, 2019 1 次提交
    • T
      x86/microcode/amd: Don't falsely trick the late loading mechanism · f964a4d2
      由 Thomas Lendacky 提交于 
      [ Upstream commit 912139cfbfa6a2bc1da052314d2c29338dae1f6a ]

The load_microcode_amd() function searches for microcode patches and
attempts to apply a microcode patch if it is of different level than the
currently installed level.

While the processor won't actually load a level that is less than
what is already installed, the logic wrongly returns UCODE_NEW thus
signaling to its caller reload_store() that a late loading should be
attempted.

If the file-system contains an older microcode revision than what is
currently running, such a late microcode reload can result in these
misleading messages:

  x86/CPU: CPU features have changed after loading microcode, but might not take effect.
  x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.

These messages were issued on a system where SME/SEV are not
enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot,
early_detect_mem_encrypt() is called and cleared the SME and SEV
features in this case.

However, after the wrong late load attempt, get_cpu_cap() is called and
reloads the SME and SEV feature bits, resulting in the messages.

Update the microcode level check to not attempt microcode loading if the
current level is greater than(!) and not only equal to the current patch
level.

 [ bp: massage commit message. ]

Fixes: 2613f36e ("x86/microcode: Attempt late loading only when new microcode is present")
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlendack-t1.amdoffice.netSigned-off-by: NSasha Levin <sashal@kernel.org>
      f964a4d2