Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Acked-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Acked-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Acked-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Acked-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Acked-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Acked-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add the sysfs entries pp_gfx_power_profile and
pp_compute_power_profile which give user a way to set
power profile through parameters minimum sclk, minimum mclk,
activity threshold, up hysteresis and down hysteresis only
when the entry power_dpm_force_performance_level is in
default value "auto". It is read and write. Example:

echo 500 800 20 0 5 > /sys/class/drm/card0/device/pp_*_power_profile

cat /sys/class/drm/card0/device/pp_*_power_profile
500 800 20 0 5

Note: first parameter is sclk in MHz, second is mclk in MHz,
third is activity threshold in percentage, fourth is up hysteresis
in ms and fifth is down hysteresis in ms.

echo set > /sys/class/drm/card0/device/pp_*_power_profile
To set power profile state if it exists.

echo reset > /sys/class/drm/card0/device/pp_*_power_profile
To restore default state and clear previous setting.
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Acked-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this lock is used for sriov_gpu_reset, only get this mutex
can run into sriov_gpu_reset.

we have couple source triggers gpu_reset for SRIOV:
1) submit timedout and trigger reset voluntarily
2) invalid instruction detected by ENGINE and trigger reset voluntarily
2) hypervisor found world switch hang and trigger flr and notify guest to
   do reset.

all need take care and we need a mutex to protect the consistency of
reset routine.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

implement SRIOV gpu_reset for future use.
it wil be called from:
1) job timeout
2) privl access or instruction error interrupt
3) hypervisor detect VF hang

v2: agd: rebase on upstream
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sw part only invoked once during sw_init.
hw part invoked during first drv load and resume later.

that way we cannot alloc mqd in hw/resume, we only keep
mqd allocted in sw_init routine.
and hw_init routine only kmap and set it.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We ultimately want to re-use this for bare metal,
so no need to have vf checks in the KIQ code itself
since kiq itself is currently only used in VF cases.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this is for SRIOV fix:
mqd soft init/fini will be invoked by sw_init to
allocate BO for compute MQD resource, instead of
original scheme that hw_init allocates MQD.

because if hw_init allocates MQD, then resume will
allocate MQD, and that lead to memory leak after
driver recovered from hang.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

introduce a new mqd member in ring is for later usage.
we need keep a clean version of MQD for the purpose
of recovering compute rings from hang.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

CG & PG function changes engine clock/gating, which is
not appropriate for VF device, because one vf doesn't know
the whole picture of engine's overall workload.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

CPU is not efficient to clean framebuffer especially under
virtualization, then loading driver takes long time which causes
timeout of mailbox handshake.
Signed-off-by: NPixel Ding <Pixel.Ding@amd.com>
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ib_pool init should prior to fbdev_init, otherwise
there will be error from amdgpu_sa_bo_new
(amdgpu_sa.c:323)

fbdev_init will call ttm_validate which further call
amdgpu_sa_bo_new.

v2:
move fbdev_init behind ib test.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VF uses KIQ to access registers. When VM fault occurs, the driver
can't get back the fence of KIQ submission and runs into CPU soft
lockup.
Signed-off-by: NPixel Ding <Pixel.Ding@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When multiple VFs try to enter exclusive mode at the same time, the
looping mechansim doesn't help to ensure each can get it because it
only loops active VFs, then the last one has to wait for a long
interval.
Signed-off-by: NPixel Ding <Pixel.Ding@amd.com>
Reviewed-by: NXiangliang.Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1,like pp_hw_init, we shouldn't report error if PP disabled
2,disable pp_en if sriov
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The clearing wb size should be the one that it is assigned.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Higher sclks seem to be unstable on some boards.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=100222Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The MMIO space is wider now so we mask the lower 22 bits
instead of 18.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems
with higher sclks.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The AMD ACP driver adds "-I../acp -I../acp/include" to the gcc command
line, which makes no sense, since these are evaluated relative to the
build directory. When we build with "make W=1", they instead cause
a warning:

cc1: error: ../acp/: No such file or directory [-Werror=missing-include-dirs]
cc1: error: ../acp/include: No such file or directory [-Werror=missing-include-dirs]
cc1: all warnings being treated as errors
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o' failed
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_device.o' failed
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_kms.o' failed

This removes the subdir-ccflags variable that evidently did not
serve any purpose here.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we don't reset the chunk info in the error path, the subsequent
fini path will double free.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently compute jobs will stall if GFX_PG is enabled.  Until this
is resolved we'll disable GFX_PG.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Fix typos and add the following to the scripts/spelling.txt:

  disble||disable
  disbled||disabled

I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched.  The macro is not referenced at all, but this commit is
touching only comment blocks just in case.

Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We added new gem ioctl flags and the new fences ioctl, but forgot
to bump the version.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reject it if there are any invalid flags or domains.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJim Qu <Jim.Qu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update code that relied on sched.h including various MM types for them.

This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>