drivers/media/platform/soc_camera/mx2_camera.c: In function 'mx27_camera_emma_prp_reset':
drivers/media/platform/soc_camera/mx2_camera.c:812:6: warning: variable 'cntl' set but not used [-Wunused-but-set-variable]
  u32 cntl;
      ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/exynos4-is/media-dev.c: In function 'fimc_md_link_notify':
drivers/media/platform/exynos4-is/media-dev.c:1102:4: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
    ; /* TODO: Link state change validation */
    ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/exynos4-is/mipi-csis.c: In function 's5pcsis_parse_dt':
drivers/media/platform/exynos4-is/mipi-csis.c:756:2: warning: comparison is always false due to limited range of data type [-Wtype-limits]
  if (state->index < 0 || state->index >= CSIS_MAX_ENTITIES)
  ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:826:5: warning: no previous prototype for 'vidioc_decoder_cmd' [-Wmissing-prototypes]
 int vidioc_decoder_cmd(struct file *file, void *priv,
     ^
drivers/media/platform/s5p-mfc/s5p_mfc.c: In function 's5p_mfc_runtime_resume':
drivers/media/platform/s5p-mfc/s5p_mfc.c:1314:6: warning: variable 'pre_power' set but not used [-Wunused-but-set-variable]
  int pre_power;
      ^
drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c:163:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v5' [-Wmissing-prototypes]
 struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v5(void)
                         ^
drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c:156:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v6' [-Wmissing-prototypes]
 struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v6(void)
                         ^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c: In function 's5p_mfc_run_dec_frame':
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c:1189:15: warning: variable 'index' set but not used [-Wunused-but-set-variable]
  unsigned int index;
               ^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'cleanup_ref_queue':
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:27: warning: variable 'mb_c_addr' set but not used [-Wunused-but-set-variable]
  unsigned long mb_y_addr, mb_c_addr;
                           ^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:16: warning: variable 'mb_y_addr' set but not used [-Wunused-but-set-variable]
  unsigned long mb_y_addr, mb_c_addr;
                ^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: At top level:
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1684:5: warning: no previous prototype for 'vidioc_encoder_cmd' [-Wmissing-prototypes]
 int vidioc_encoder_cmd(struct file *file, void *priv,
     ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

That gets rid of the following warnings:

drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:119:5: warning: no previous prototype for 's5p_mfc_release_firmware' [-Wmissing-prototypes]
 int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
     ^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:132:5: warning: no previous prototype for 's5p_mfc_reset' [-Wmissing-prototypes]
 int s5p_mfc_reset(struct s5p_mfc_dev *dev)
     ^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:214:5: warning: no previous prototype for 's5p_mfc_init_hw' [-Wmissing-prototypes]
 int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
     ^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:291:6: warning: no previous prototype for 's5p_mfc_deinit_hw' [-Wmissing-prototypes]
 void s5p_mfc_deinit_hw(struct s5p_mfc_dev *dev)
      ^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:301:5: warning: no previous prototype for 's5p_mfc_sleep' [-Wmissing-prototypes]
 int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
     ^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:330:5: warning: no previous prototype for 's5p_mfc_wakeup' [-Wmissing-prototypes]
 int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
     ^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:378:5: warning: no previous prototype for 's5p_mfc_open_mfc_inst' [-Wmissing-prototypes]
 int s5p_mfc_open_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
     ^
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:420:6: warning: no previous prototype for 's5p_mfc_close_mfc_inst' [-Wmissing-prototypes]
 void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
      ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

In file included from drivers/media/platform/exynos4-is/fimc-is-param.c:31:0:
drivers/media/platform/exynos4-is/fimc-is-errno.h:245:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
 const char * const fimc_is_strerr(unsigned int error);
                    ^
drivers/media/platform/exynos4-is/fimc-is-errno.h:246:20: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
 const char * const fimc_is_param_strerr(unsigned int error);
                    ^
drivers/media/platform/exynos4-is/fimc-is-param.c: In function 'fimc_is_set_initial_params':
drivers/media/platform/exynos4-is/fimc-is-param.c:670:23: warning: variable 'sensor' set but not used [-Wunused-but-set-variable]
  struct sensor_param *sensor;
                       ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/s5p-g2d/g2d.c: In function 'job_abort':
drivers/media/platform/s5p-g2d/g2d.c:493:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret;
      ^

The job_abort function returns void. No sense to get the
returned argument, if this won't be used.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Declare this as static:

drivers/media/platform/s5p-jpeg/jpeg-core.c:732:6: warning: no previous prototype for 'exynos4_jpeg_set_huff_tbl' [-Wmissing-prototypes]
 void exynos4_jpeg_set_huff_tbl(void __iomem *base)
      ^

And don't compile this dead code, while not needed:
drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:236:14: warning: no previous prototype for 'exynos3250_jpeg_get_y' [-Wmissing-prototypes]
 unsigned int exynos3250_jpeg_get_y(void __iomem *regs)
              ^
drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c:241:14: warning: no previous prototype for 'exynos3250_jpeg_get_x' [-Wmissing-prototypes]
 unsigned int exynos3250_jpeg_get_x(void __iomem *regs)
              ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/omap/omap_vout.c: In function 'omapvid_setup_overlay':
drivers/media/platform/omap/omap_vout.c:372:29: warning: variable 'pixheight' set but not used [-Wunused-but-set-variable]
  int cropheight, cropwidth, pixheight, pixwidth;
                             ^
drivers/media/platform/omap/omap_vout.c: In function 'vidioc_s_ctrl':
drivers/media/platform/omap/omap_vout.c:1454:24: warning: variable 'ovl' set but not used [-Wunused-but-set-variable]
   struct omap_overlay *ovl;
                        ^
drivers/media/platform/omap/omap_vout.c: In function 'vidioc_reqbufs':
drivers/media/platform/omap/omap_vout.c:1492:55: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if ((req->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) || (req->count < 0))
                                                       ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

When CONFIG_VIDEO_OMAP2_VOUT_VRFB is disabled, the compilation
will fail, as the function stubs are wrong. Also, as they weren't
declared as static inline, lots of warnings will be generated.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/exynos-gsc/gsc-core.c:855:2: note: in expansion of macro 'pr_debug'
  pr_debug("ADDR: y= 0x%X  cb= 0x%X cr= 0x%X ret= %d",
  ^
include/linux/dynamic_debug.h:64:16: warning: format '%X' expects argument of type 'unsigned int', but argument 4 has type 'dma
_addr_t' [-Wformat=]
  static struct _ddebug  __aligned(8)   \
                ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The needed bandwidth can be estimated using the symbol rate and
the rolloff factor. This could be useful for the frontend drivers,
as they don't need to calculate it themselves.
Reported-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The fpc_table_addr is used as an unsigned integer that stores
an address. At the Kernel, the proper type for such integers
is unsigned long.

This generates lots of warnings when compiling on 64 bits.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Shut up several warnings about invalid casting when printing
the values of two pointers.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The 'debug' name is known to cause conflicts with allyesconfig
on several archs. So, localize its name.

>> drivers/built-in.o:(.bss+0xc7ee2c): multiple definition of `debug'
   arch/x86/built-in.o:(.entry.text+0xf78): first defined here
   ld: Warning: size of symbol `debug' changed from 86 in arch/x86/built-in.o to 4 in drivers/built-in.o

While here, fix a wrong file name reference
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

   drivers/media/platform/soc_camera/atmel-isi.c: In function 'start_streaming':
   drivers/media/platform/soc_camera/atmel-isi.c:397:26: warning: large integer implicitly truncated to unsigned type [-Woverflow]
     isi_writel(isi, ISI_INTDIS, ~0UL);
                             ^
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of using u32 for DMA address, use the proper
Kernel type for it.

   drivers/media/platform/soc_camera/atmel-isi.c: In function 'atmel_isi_probe':
>> drivers/media/platform/soc_camera/atmel-isi.c:981:26: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type
     isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
                             ^
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

   drivers/media/platform/ti-vpe/vpdma.c: In function 'vpdma_alloc_desc_buf':
>> drivers/media/platform/ti-vpe/vpdma.c:332:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
     WARN_ON((u32) buf->addr & VPDMA_DESC_ALIGN);
             ^
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

   drivers/media/platform/ti-vpe/vpdma.c: In function 'dump_dtd':
   include/linux/dynamic_debug.h:64:16: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=]
     static struct _ddebug  __aligned(8)   \
                   ^
   include/linux/dynamic_debug.h:76:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA'
     DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
     ^
   include/linux/printk.h:263:2: note: in expansion of macro 'dynamic_pr_debug'
     dynamic_pr_debug(fmt, ##__VA_ARGS__)
     ^
>> drivers/media/platform/ti-vpe/vpdma.c:587:2: note: in expansion of macro 'pr_debug'
     pr_debug("word2: start_addr = 0x%08x\n", dtd->start_addr);
     ^
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/exynos-gsc/gsc-m2m.c: In function 'gsc_m2m_reqbufs':
drivers/media/platform/exynos-gsc/gsc-m2m.c:365:20: warning: variable 'frame' s
et but not used [-Wunused-but-set-variable]
  struct gsc_frame *frame;
                    ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/exynos-gsc/gsc-core.c: In function 'gsc_probe':
drivers/media/platform/exynos-gsc/gsc-core.c:1089:2: warning: comparison is alw
ays false due to limited range of data type [-Wtype-limits]
  if (gsc->id < 0 || gsc->id >= drv_data->num_entities) {
  ^

gsc->id is declared as u16, so it should always be a positive
value.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/davinci/dm355_ccdc.c:463:5: warning: no previous prototy
pe for 'ccdc_write_dfc_entry' [-Wmissing-prototypes]
 int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
     ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/davinci/dm644x_ccdc.c:133:6: warning: no previous protot
ype for 'ccdc_setwin' [-Wmissing-prototypes]
 void ccdc_setwin(struct v4l2_rect *image_win,
      ^
drivers/media/platform/davinci/dm644x_ccdc.c:373:6: warning: no previous protot
ype for 'ccdc_config_ycbcr' [-Wmissing-prototypes]
 void ccdc_config_ycbcr(void)
      ^
drivers/media/platform/davinci/dm644x_ccdc.c:526:6: warning: no previous protot
ype for 'ccdc_config_raw' [-Wmissing-prototypes]
 void ccdc_config_raw(void)
      ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_channel_isr':
drivers/media/platform/davinci/vpif_capture.c:376:18: warning: variable 'field'
 set but not used [-Wunused-but-set-variable]
  enum v4l2_field field;
                  ^
drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_calculate_offs
ets':
drivers/media/platform/davinci/vpif_capture.c:536:23: warning: variable 'vpitch
' set but not used [-Wunused-but-set-variable]
  unsigned int hpitch, vpitch, sizeimage;
                       ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/platform/davinci/vpif_display.c: In function 'vpif_channel_isr':
drivers/media/platform/davinci/vpif_display.c:363:18: warning: variable 'field'
 set but not used [-Wunused-but-set-variable]
  enum v4l2_field field;
                  ^
drivers/media/platform/davinci/vpif_display.c: In function 'vpif_calculate_offs
ets':
drivers/media/platform/davinci/vpif_display.c:505:23: warning: variable 'vpitch
' set but not used [-Wunused-but-set-variable]
  unsigned int hpitch, vpitch, sizeimage;
                       ^
drivers/media/platform/davinci/vpif_display.c: In function 'vpif_set_output':
drivers/media/platform/davinci/vpif_display.c:816:27: warning: variable 'subdev
_info' set but not used [-Wunused-but-set-variable]
  struct vpif_subdev_info *subdev_info = NULL;
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix build when CONFIG_INPUT_EVDEV=m and DVB_AV7110=y.
Only build av7110_ir.c when CONFIG_INPUT_EVDEV is compatible with
CONFIG_DVB_AV7110.

Fixes these build errors:

drivers/built-in.o: In function `input_sync':
av7110_ir.c:(.text+0x1223ac): undefined reference to `input_event'
drivers/built-in.o: In function `av7110_emit_key':
av7110_ir.c:(.text+0x12247c): undefined reference to `input_event'
av7110_ir.c:(.text+0x122495): undefined reference to `input_event'
av7110_ir.c:(.text+0x122569): undefined reference to `input_event'
av7110_ir.c:(.text+0x1225a7): undefined reference to `input_event'
drivers/built-in.o:av7110_ir.c:(.text+0x122629): more undefined
references to `input_event' follow
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x1227e4): undefined reference to `input_allocate_device'
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x12298f): undefined reference to `input_register_device'
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x12299e): undefined reference to `input_free_device'
drivers/built-in.o: In function `av7110_ir_exit':
(.text+0x122a94): undefined reference to `input_unregister_device'

drivers/built-in.o: In function `av7110_detach':
av7110.c:(.text+0x228d4a): undefined reference to `av7110_ir_exit'
drivers/built-in.o: In function `arm_thread':
av7110.c:(.text+0x22a404): undefined reference to `av7110_check_ir_config'
av7110.c:(.text+0x22a626): undefined reference to `av7110_check_ir_config'
drivers/built-in.o: In function `av7110_attach':
av7110.c:(.text+0x22b08c): undefined reference to `av7110_ir_init'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NJim Davis <jim.epost@gmail.com>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Now that alsa code is part of the driver, it can be compiled
only if alsa is enabled.

   drivers/built-in.o: In function `snd_usbtv_hw_free':
>> usbtv-audio.c:(.text+0x21eb55): undefined reference to `snd_pcm_lib_free_pages'
   drivers/built-in.o: In function `snd_usbtv_hw_params':
>> usbtv-audio.c:(.text+0x21eb72): undefined reference to `snd_pcm_lib_malloc_pages'
   drivers/built-in.o: In function `usbtv_audio_urb_received':
>> usbtv-audio.c:(.text+0x21ed66): undefined reference to `snd_pcm_link_rwlock'
>> usbtv-audio.c:(.text+0x21ed9f): undefined reference to `snd_pcm_link_rwlock'
>> usbtv-audio.c:(.text+0x21edf5): undefined reference to `snd_pcm_period_elapsed'
   drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f00a): undefined reference to `snd_card_new'
   drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f0a2): undefined reference to `snd_pcm_new'
   drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f0e5): undefined reference to `snd_pcm_set_ops'
   drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f103): undefined reference to `snd_pcm_lib_preallocate_pages_for_all'
   drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f10c): undefined reference to `snd_card_register'
   drivers/built-in.o: In function `usbtv_audio_init':
>> (.text+0x21f12a): undefined reference to `snd_card_free'
   drivers/built-in.o: In function `usbtv_audio_free':
>> (.text+0x21f15c): undefined reference to `snd_card_free'
>> drivers/built-in.o:(.data+0x43250): undefined reference to `snd_pcm_lib_ioctl'
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

au0828 doesn't resume correctly and TV tuning fails with
xc_set_signal_source(0) failed message. Change au0828 dvb
suspend and resume interfaces to suspend and resume frontend
during suspend and resume respectively. dvb_frontend_suspend()
suspends tuner and fe using tuner and fe ops. dvb_frontend_resume()
resumes fe and tuner using fe and tuner ops ini before waking up
the frontend. With this change HVR950Q suspend and resume work
when system gets suspended when digital function is tuned to a
channel and with active TV stream, and after resume it went right
back to active TV stream.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The correct field order in progressive mode is V4L2_FIELD_NONE, not V4L2_FIELD_INTERLACED.

Cc: <stable@vger.kernel.org>
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

When a new video frame is started, the driver takes the next video buffer from
the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf
for further processing.

On streaming stop we currently only give back the pending buffers from the list
but not the ones which are currently processed.

This causes the following warning from the vb2 core since kernel 3.15:

...
 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]()
 [...]
 Call Trace:
  [<c0769c46>] dump_stack+0x48/0x69
  [<c0245b69>] warn_slowpath_common+0x79/0x90
  [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<c0245bfd>] warn_slowpath_null+0x1d/0x20
  [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core]
  [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core]
  [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core]
  [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev]
  [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<c039d0e7>] ? fsnotify+0x1e7/0x2b0
  [<f8e49012>] video_ioctl2+0x12/0x20 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev]
  [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev]
  [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0
  [<c0368eec>] ? vfs_write+0x13c/0x1c0
  [<c0369a8f>] ? vfs_writev+0x2f/0x50
  [<c0379028>] SyS_ioctl+0x58/0x80
  [<c076fff3>] sysenter_do_call+0x12/0x12
 ---[ end trace 5545f934409f13f4 ]---
...

Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled
this long standing issue and who has investigated it further.

Cc: <stable@vger.kernel.org>
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

So we can remove the same defines in the driver code.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

So we can remove the same defines in the driver code.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix a copy-paste bug when converting to the control framework.

Fixes: commit 5d478e0d ("[media] tda7432: convert to the control framework")
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

So we can remove the same defines in the driver code.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

So we can remove the same defines in the driver code.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

So we can remove the same defines in the driver code.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

So we can remove the same defines in the driver code.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Constify event type constants and correct motion detection event number
(it's 6, not 5).
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Make the front panel buttons working after another button on the
remote was pressed.
Signed-off-by: NUlrich Eckhardt <uli@uli-eckhardt.de>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add the key table for the Thermaltake DH-102 to the USB-Id 15c2:0034.
Signed-off-by: NUlrich Eckhardt <uli@uli-eckhardt.de>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>