Add new cgroup based program type, BPF_PROG_TYPE_CGROUP_SOCK. Similar to
BPF_PROG_TYPE_CGROUP_SKB programs can be attached to a cgroup and run
any time a process in the cgroup opens an AF_INET or AF_INET6 socket.
Currently only sk_bound_dev_if is exported to userspace for modification
by a bpf program.

This allows a cgroup to be configured such that AF_INET{6} sockets opened
by processes are automatically bound to a specific device. In turn, this
enables the running of programs that do not support SO_BINDTODEVICE in a
specific VRF context / L3 domain.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Code move and rename only; no functional change intended.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

My recent commit to get more precise rx/tx counters in ndo_get_stats64()
can lead to crashes at device dismantle, as Jesper found out.

We must prevent mlx4_en_fold_software_stats() trying to access
tx/rx rings if they are deleted.

Fix this by adding a test against priv->port_up in
mlx4_en_fold_software_stats()

Calling mlx4_en_fold_software_stats() from mlx4_en_stop_port()
allows us to eventually broadcast the latest/current counters to
rtnetlink monitors.

Fixes: 40931b85 ("mlx4: give precise rx/tx bytes/packets counters")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-and-bisected-by: NJesper Dangaard Brouer <brouer@redhat.com>
Tested-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@dev.mellanox.co.il>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Transmit queue timeout issue is seen in two cases
- Due to a race condition btw setting stop_queue at xmit()
  and checking for stopped_queue in NAPI poll routine, at times
  transmission from a SQ comes to a halt. This is fixed
  by using barriers and also added a check for SQ free descriptors,
  incase SQ is stopped and there are only CQE_RX i.e no CQE_TX.
- Contrary to an assumption, a HW errata where HW doesn't stop transmission
  even though there are not enough CQEs available for a CQE_TX is
  not fixed in T88 pass 2.x. This results in a Qset error with
  'CQ_WR_FULL' stalling transmission. This is fixed by adjusting
  RXQ's  RED levels for CQ level such that there is always enough
  space left for CQE_TXs.
Signed-off-by: NSunil Goutham <sgoutham@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hadar Hen Zion says:

====================
Offloading tc rules using underline Hardware device

This series adds flower classifier support in offloading tc rules when the
Software ingress device is different from the Hardware ingress device,
such as when dealing with IP tunnels

The first two patches are a small fixes to flower, checking the skip_hw flag
wasn't set before calling the Hardware offloading functions which will try to
offload the rule.

The next two patches are infrastructure patches, a preparation for the fourth
patch which is adding support in flower to offload rules when the ingress
device is not a Hardware device and therefore can't offload.
In this case ndo_setup_tc is called with the mirred (egress) device.

The last three patchs are adding mlx5e support to offload rules using the new
"egress_device" flag.

Thanks,
Hadar

Changes from v0:
- check if CONFIG_NET_CLS_ACT is defined befor calling tc_action_ops get_dev()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When ndo_setup_tc is called with an egress_dev flag set, it means that
the ndo call was executed on the mirred action (egress) device and not
on the ingress device.

In order to support this kind of ndo_setup_tc call, and insert the
correct decap rule to the hardware, the uplink device on the same eswitch
should be found.

Currently, we use this resolution between the mirred device and the
uplink on the same eswitch to offload vxlan shared device decap rules.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the representor private data to a net_device pointer holding the
representor netdevice, instead of void pointer holding mlx5e_priv.

It will be used by a new eswitch service function, returning the uplink representor
netdevice.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The VF Representor udp tunnel ndo entries were removed by mistake,
return them.

Fixes: 370bad0f ('net/mlx5e: Support HW (offloaded) and SW counters for SRIOV switchdev mode')
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to support hardware offloading when the device given by the tc
rule is different from the Hardware underline device, extract the mirred
(egress) device from the tc action when a filter is added, using the new
tc_action_ops, get_dev().

Flower caches the information about the mirred device and use it for
calling ndo_setup_tc in filter change, update stats and delete.

Calling ndo_setup_tc of the mirred (egress) device instead of the
ingress device will allow a resolution between the software ingress
device and the underline hardware device.

The resolution will take place inside the offloading driver using
'egress_device' flag added to tc_to_netdev struct which is provided to
the offloading driver.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding support to a new tc_action_ops.
get_dev is a general option which allows to get the underline
device when trying to offload a tc rule.

In case of mirred action the returned device is the mirred (egress)
device.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of providing many arguments to fl_hw_{replace/destroy}_filter
functions, just provide cls_fl_filter struct that includes all the relevant
args.

This patches doesn't add any new functionality.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check skip_hw flag isn't set before calling
fl_hw_{replace/destroy}_filter and fl_hw_update_stats functions.

Replace the call to tc_should_offload with tc_can_offload.
tc_can_offload only checks if the device supports offloading, the check for
skip_hw flag is done earlier in the flow.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Creating a difference between two possible cases:
1. Not offloading tc rule since the user sets 'skip_hw' flag.
2. Not offloading tc rule since the device doesn't support offloading.

This patch doesn't add any new functionality.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric says: "By looking at tcpdump, and TS val of xmit packets of multiple
flows, we can deduct the relative qdisc delays (think of fq pacing).
This should work even if we have one flow per remote peer."

Having random per flow (or host) offsets doesn't allow that anymore so add
a way to turn this off.
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

jiffies based timestamps allow for easy inference of number of devices
behind NAT translators and also makes tracking of hosts simpler.

commit ceaa1fef ("tcp: adding a per-socket timestamp offset")
added the main infrastructure that is needed for per-connection ts
randomization, in particular writing/reading the on-wire tcp header
format takes the offset into account so rest of stack can use normal
tcp_time_stamp (jiffies).

So only two items are left:
 - add a tsoffset for request sockets
 - extend the tcp isn generator to also return another 32bit number
   in addition to the ISN.

Re-use of ISN generator also means timestamps are still monotonically
increasing for same connection quadruple, i.e. PAWS will still work.

Includes fixes from Eric Dumazet.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Manish Rangankar says:

====================
Add QLogic FastLinQ iSCSI (qedi) driver.

This series introduces hardware offload iSCSI initiator driver for the
41000 Series Converged Network Adapters (579xx chip) by Qlogic. The overall
driver design includes a common module ('qed') and protocol specific
dependent modules ('qedi' for iSCSI).

This is an open iSCSI driver, modifications to open iSCSI user components
'iscsid', 'iscsiuio', etc. are required for the solution to work. The user
space changes are also in the process of being submitted.

    https://groups.google.com/forum/#!forum/open-iscsi

The 'qed' common module, under drivers/net/ethernet/qlogic/qed/, is
enhanced with functionality required for the iSCSI support. This series
is based on:

    net tree base: Merge of net and net-next as of 11/29/2016

Changes from RFC v2:

  1. qedi patches are squashed into single patch to prevent krobot
     warning.
  2. Fixed 'hw_p_cpuq' incompatible pointer type.
  3. Fixed sparse incompatible types in comparison expression.
  4. Misc fixes with latest 'checkpatch --strict' option.
  5. Remove int_mode option from MODULE_PARAM.
  6. Prefix all MODULE_PARAM params with qedi_*.
  7. Use CONFIG_QED_ISCSI instead of CONFIG_QEDI
  8. Added bad task mem access fix.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds out of order packet handling for hardware offloaded
iSCSI. Out of order packet handling requires driver buffer allocation
and assistance.
Signed-off-by: NArun Easi <arun.easi@cavium.com>
Signed-off-by: NYuval Mintz <yuval.mintz@cavium.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds the backbone required for the various HW initalizations
which are necessary for the iSCSI driver (qedi) for QLogic FastLinQ
4xxxx line of adapters - FW notification, resource initializations, etc.
Signed-off-by: NArun Easi <arun.easi@cavium.com>
Signed-off-by: NYuval Mintz <yuval.mintz@cavium.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is already using the %pM printf extension; might as well also use
%ph to make the code smaller.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_INET is disabled, the new selftest results in a link
error:

drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.o: In function `mlx5e_test_loopback':
en_selftest.c:(.text.mlx5e_test_loopback+0x2ec): undefined reference to `ip_send_check'
en_selftest.c:(.text.mlx5e_test_loopback+0x34c): undefined reference to `udp4_hwcsum'

This hides the specific test in that configuration.

Fixes: 0952da79 ("net/mlx5e: Add support for loopback selftest")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After 326fe02d ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"),
the rcu_read_lock() in bpf_prog_run_xdp() is superfluous, since callers
need to hold rcu_read_lock() already to make sure BPF program doesn't
get released in the background.

Thus, drop it from bpf_prog_run_xdp(), as it can otherwise be misleading.
Still keeping the bpf_prog_run_xdp() is useful as it allows for grepping
in XDP supported drivers and to keep the typecheck on the context intact.
For mlx4, this means we don't have a double rcu_read_lock() anymore. nfp can
just make use of bpf_prog_run_xdp(), too. For qede, just move rcu_read_lock()
out of the helper. When the driver gets atomic replace support, this will
move to call-sites eventually.

mlx5 needs actual fixing as it has the same issue as described already in
326fe02d ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"),
that is, we're under RCU bh at this time, BPF programs are released via
call_rcu(), and call_rcu() != call_rcu_bh(), so we need to properly mark
read side as programs can get xchg()'ed in mlx5e_xdp_set() without queue
reset.

Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only when ICMP packets are enqueued onto the error queue,
sk_err is also set. Before f5f99309 (sock: do not set sk_err
in sock_dequeue_err_skb), a subsequent error queue read
would set sk_err to the next error on the queue, or 0 if empty.
As no error types other than ICMP set this field, sk_err should
not be modified upon dequeuing them.

Only for ICMP errors, reset the (racy) sk_err. Some applications,
like traceroute, rely on it and go into a futile busy POLLERR
loop otherwise.

In principle, sk_err has to be set while an ICMP error is queued.
Testing is_icmp_err_skb(skb_next) approximates this without
requiring a full queue walk. Applications that receive both ICMP
and other errors cannot rely on this legacy behavior, as other
errors do not set sk_err in the first place.

Fixes: f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb)
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thomas Graf says:

====================
bpf: BPF for lightweight tunnel encapsulation

This series implements BPF program invocation from dst entries via the
lightweight tunnels infrastructure. The BPF program can be attached to
lwtunnel_input(), lwtunnel_output() or lwtunnel_xmit() and see an L3
skb as context. Programs attached to input and output are read-only.
Programs attached to lwtunnel_xmit() can modify and redirect, push headers
and redirect packets.

The facility can be used to:
 - Collect statistics and generate sampling data for a subset of traffic
   based on the dst utilized by the packet thus allowing to extend the
   existing realms.
 - Apply additional per route/dst filters to prohibit certain outgoing
   or incoming packets based on BPF filters. In particular, this allows
   to maintain per dst custom state across multiple packets in BPF maps
   and apply filters based on statistics and behaviour observed over time.
 - Attachment of L2 headers at transmit where resolving the L2 address
   is not required.
 - Possibly many more.

v3 -> v4:
 - Bumped LWT_BPF_MAX_HEADROOM from 128 to 256 (Alexei)
 - Renamed bpf_skb_push() helper to bpf_skb_change_head() to relate to
   existing bpf_skb_change_tail() helper (Alexei/Daniel)
 - Added check in __bpf_redirect_common() to verify that program added a
   link header before redirecting to a l2 device. Adding the check to
   lwt-bpf code was considered but dropped due to massive code required
   due to retrieval of net_device via per-cpu redirect buffer. A test
   case was added to cover the scenario when a program directs to an l2
   device without adding an appropriate l2 header.
   (Alexei)
 - Prohibited access to tc_classid (Daniel)
 - Collapsed bpf_verifier_ops instance for lwt in/out as they are
   identical (Daniel)
 - Some cosmetic changes

v2 -> v3:
 - Added real world sample lwt_len_hist_kern.c which demonstrates how to
   collect a histogram on packet sizes for all packets flowing through
   a number of routes.
 - Restricted output to be read-only. Since the header can no longer
   be modified, the rerouting functionality has been removed again.
 - Added test case which cover destructive modification of packet data.

v1 -> v2:
 - Added new BPF_LWT_REROUTE return code for program to indicate
   that new route lookup should be performed. Suggested by Tom.
 - New sample to illustrate rerouting
 - New patch 05: Recursion limit for lwtunnel_output for the case
   when user creates circular dst redirection. Also resolves the
   issue for ILA.
 - Fix to ensure headroom for potential future L2 header is still
   guaranteed
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds a series of tests to verify the functionality of attaching
BPF programs at LWT hooks.

Also adds a sample which collects a histogram of packet sizes which
pass through an LWT hook.

$ ./lwt_len_hist.sh
Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.253.2 () port 0 AF_INET : demo
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.00    39857.69
       1 -> 1        : 0        |                                      |
       2 -> 3        : 0        |                                      |
       4 -> 7        : 0        |                                      |
       8 -> 15       : 0        |                                      |
      16 -> 31       : 0        |                                      |
      32 -> 63       : 22       |                                      |
      64 -> 127      : 98       |                                      |
     128 -> 255      : 213      |                                      |
     256 -> 511      : 1444251  |********                              |
     512 -> 1023     : 660610   |***                                   |
    1024 -> 2047     : 535241   |**                                    |
    2048 -> 4095     : 19       |                                      |
    4096 -> 8191     : 180      |                                      |
    8192 -> 16383    : 5578023  |************************************* |
   16384 -> 32767    : 632099   |***                                   |
   32768 -> 65535    : 6575     |                                      |
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Registers new BPF program types which correspond to the LWT hooks:
  - BPF_PROG_TYPE_LWT_IN   => dst_input()
  - BPF_PROG_TYPE_LWT_OUT  => dst_output()
  - BPF_PROG_TYPE_LWT_XMIT => lwtunnel_xmit()

The separate program types are required to differentiate between the
capabilities each LWT hook allows:

 * Programs attached to dst_input() or dst_output() are restricted and
   may only read the data of an skb. This prevent modification and
   possible invalidation of already validated packet headers on receive
   and the construction of illegal headers while the IP headers are
   still being assembled.

 * Programs attached to lwtunnel_xmit() are allowed to modify packet
   content as well as prepending an L2 header via a newly introduced
   helper bpf_skb_change_head(). This is safe as lwtunnel_xmit() is
   invoked after the IP header has been assembled completely.

All BPF programs receive an skb with L3 headers attached and may return
one of the following error codes:

 BPF_OK - Continue routing as per nexthop
 BPF_DROP - Drop skb and return EPERM
 BPF_REDIRECT - Redirect skb to device as per redirect() helper.
                (Only valid in lwtunnel_xmit() context)

The return codes are binary compatible with their TC_ACT_
relatives to ease compatibility.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A route on the output path hitting a RTN_LOCAL route will keep the dst
associated on its way through the loopback device. On the receive path,
the dst_input() call will thus invoke the input handler of the route
created in the output path. Thus, lwt redirection for input must be done
for dsts allocated in the otuput path as well.

Also, if a route is cached in the input path, the allocated dst should
respect lwtunnel configuration on the nexthop as well.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

orig_output for IPv4 was only set for dsts which hit an input route.
Set it consistently for locally generated traffic as well to allow
lwt to continue the dst_output() path as configured by the nexthop.

Fixes: 25368623 ("lwt: Add support to redirect dst.input")
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G mlx5 updates 2016-11-29

The following series from Tariq and Roi, provides some critical fixes
and updates for the mlx5e driver.

From Tariq:
 - Fix driver coherent memory huge allocation issues by fragmenting
   completion queues, in a way that is transparent to the netdev driver by
   providing a new buffer type "mlx5_frag_buf" with the same access API.
 - Create UMR MKey per RQ to have better scalability.

From Roi:
 - Some fixes for the encap-decap support and tc flower added lately to the
   mlx5e driver.

v1->v2:
 - Fix start index in error flow of mlx5_frag_buf_alloc_node, pointed out by Eric.

This series was generated against commit:
31ac1c19 ("geneve: fix ip_hdr_len reserved for geneve6 tunnel.")
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Handling flow encap entry should be inside tc del flow
and is only relevant for offloaded eswitch TC rules.

Fixes: 11a457e9b6c1 ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the function that deletes offloaded TC rule to get
struct mlx5e_tc_flow instance which contains both the flow
handle and flow attributes. This is a cleanup needed for
downstream patches, it doesn't change any functionality.
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the reverse unwinding principle, on delete time we should
first handle deletion of the steering rule and later handle the vlan
deletion from the eswitch.

Fixes: 8b32580d ("net/mlx5e: Add TC vlan action for SRIOV offloads")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We will never find a flow with the same cookie as cls_flower always
allocates a new flow and the cookie is the allocated memory address.

Fixes: e3a2b7ed ("net/mlx5e: Support offload cls_flower with drop action")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In Striding RQ implementation, we used a single UMR
(User-Mode Memory Registration) memory key for all RQs.
When the product of RQs number*size gets high, we hit a
limitation of u16 field size in FW.

Here we move to using a UMR memory key per RQ, so we can
scale to any number of rings, with the maximum buffer
size in each.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In next patch we are going to create a UMR MKey per RQ, we need
mlx5e_create_umr_mkey declared before mlx5e_create_rq.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new type of struct mlx5_frag_buf which is used to allocate fragmented
buffers rather than contiguous, and make the Completion Queues (CQs) use
it as they are big (default of 2MB per CQ in Striding RQ).

This fixes the failures of type:
"mlx5e_open_locked: mlx5e_open_channels failed, -12"
due to dma_zalloc_coherent insufficient contiguous coherent memory to
satisfy the driver's request when the user tries to setup more or larger
rings.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reported-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neill Whillans says:

====================
net: Add support for SGMII PCS on Altera TSE MAC

These patches were created as part of work to add support for SGMII
PCS functionality to the Altera TSE MAC. Patches are based on 4.9-rc6
git tree.

The first patch in the series adds support for the VSC8572 dual-port
Gigabit Ethernet transceiver, used in integration testing.

The second patch adds support for the SGMII PCS functionality to the
Altera TSE driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the (optional) SGMII PCS functionality of the Altera
TSE MAC. If the phy-mode is set to 'sgmii' then we attempt to discover
and initialise the PCS so that the MAC can communicate to the PHY.

The PCS IP block provides a scratch register for testing presence of
the PCS, which is mapped into one of the two MDIO spaces present in
the MAC's register space.  Once we have determined that the scratch
register is functioning, we attempt to initialise the PCS to
auto-negotiate an SGMII link with the PHY. There is no need to monitor
or manage the SGMII link beyond this, since the normal PHY MDIO will
then be used to monitor the media layer.

The Altera TSE MAC has only one way in which it can be configured with an
SGMII PCS, and as such, this patch only looks to the phy-mode to select
whether or not to attempt to initialise the PCS registers.  During
initialisation, we report the PCS's equivalent of a PHY ID register.
This can be parameterised during the IP instantiation and is often left
as '0x00000000' which is not an error.
Signed-off-by: NNeill Whillans <neill.whillans@codethink.co.uk>
Reviewed-by: NDaniel Silverstone <daniel.silverstone@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the Vitesse VSC8572 which is functionally equivalent to
the already supported VSC8574. As such, all the same handling functions
are used since the VSC8572 merely has half the number of phy blocks
internally.
Signed-off-by: NStephen Agate <stephen.agate@uk.thalesgroup.com>
Signed-off-by: NNeill Whillans <neill.whillans@codethink.co.uk>
Reviewed-by: NDaniel Silverstone <daniel.silverstone@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: defalconisation fixups

A bug fix, the Kconfig change, and cleaning up a bit more unused code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's no longer used now that Falcon is gone.

Also remove a reference in a comment to an ioctl that doesn't exist.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>