pll_p_out4 needs to be used for other purposes. Reparent sclk so that
it runs from pll_c. Change sclk's rate to 120MHz from 108MHz since this
is the lowest precise rate that can be achieved by dividing the pll_c
rate without reducing the sclk rate. (600/5=120, 600/5.5=109.0909...,
600/6=100).
Signed-off-by: NStephen Warren <swarren@nvidia.com>

As the LP3 code also works for Tegra20, we can enable cpuidle for Tegra20.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Secondary CPU powerdomains can be powergated on Tegra30. Add the necessary
functions to do this. This will be used to boot the secondary CPUs later on.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Secondary core bringup relies on the Tegra chipid to distinguish between
Tegra variants. Therefore this data needs to be available early on.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This PMC driver is enough to parse the nvidia,invert-interrupt property
from device tree, and configure the PMC's to honor that.

In the future, this file could expand to centralize all other PMC accesses
within the mach-tegra code.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

uncompress.h now saves the selected UART's physical address in Tegra's
IRAM, along with a cookie to indicate validity.

The first time it's run, macro addruart in debug-macro.S looks for this
cookie, and if it's present, uses the UART address stored there. If not,
the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour.
The static behaviour will thus be used when not booting using a zImage.

This work was inspired by work by Doug Anderson <dianders@chromium.org>;
see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on
the data passing describe above, rather than duplicating the UART
selection logic in debug-macro.S; the latest selection logic is more
complex due to the need to check reset/clock bits too.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add init calls for clocks on tegra30.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: Nnicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>

Hook these platforms restart code into the new restart hook rather
than using arch_reset().
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This fixes a build break attempting to build a Tegra20-only kernel
without device tree enabled.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add support for tegra30 SoC. This includes a device tree compatible type for
this SoC ("nvidia,tegra30") and adds L2 cache initialization for this new SoC.
The clock framework is still missing, which prevents most drivers from working.
The basic IRQs are the same, so remove the dependency on
CONFIG_ARCH_TEGRA_2x_SOC.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NColin Cross <ccross@android.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Generalize L2 cache initialization and discover L2 cache associativity at
runtime.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NColin Cross <ccross@android.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Use PMC reset rather then CAR system reset as recommended by the hardware
team.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NColin Cross <ccross@android.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch splits the early init code in a common and a tegra20 specific part.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NColin Cross <ccross@android.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Not exported and not used externally.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

The following commit makes the Tegra APB DMA engine fail to initialize
correctly: 0cf6230a
ARM: tegra: Move tegra_common_init to tegra_init_early

The reason is that tegra_init_early_ calls tegra_dma_init which calls
request_threaded_irq, which fails since the IRQ hasn't yet been marked
valid; that only happens in tegra_init_irq, which gets called after
tegra_init_early.

This used to work OK, since tegra_init_early was tegra_common_init, which
got called after tegra_init_irq, basically from the beginning of
tegra_harmony_init.

Solve this by converting tegra_dma_init to a postcore_initcall. This makes
it execute late enough that IRQs are marked valid, and avoids having to
add it back to every machine's init function.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NColin Cross <ccross@android.com>

Enable the cpu, emc (memory controller) and csite (debug and
trace controller) clocks during init to prevent them from
being disabled by the bootloader clock disabling code.
Signed-off-by: NColin Cross <ccross@android.com>
Acked-by: NOlof Johansson <olof@lixom.net>

Move tegra_common_init to tegra_init_early, and set it
as the init_early entry in the machine struct.
Initializes the clocks earlier so that timers can enable
their clocks.

Also reorders the members in the Harmony and Trimslice
boards' machine structs to match the order they are
called in.
Signed-off-by: NColin Cross <ccross@android.com>
Acked-by: NOlof Johansson <olof@lixom.net>

This seems to be a regression in 2.6.37.

We cannot use writel() here since the resulting wmb() calls l2x0_cache_sync()
which uses a spinlock and L1 cache may be off at this point.

http://lists.infradead.org/pipermail/linux-arm-kernel/2011-February/041909.htmlSigned-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NColin Cross <ccross@android.com>

Signed-off-by: NColin Cross <ccross@android.com>

Signed-off-by: NColin Cross <ccross@android.com>

The APB DMA block handles DMA transfers to and from some peripherals
in the Tegra SOC.  It reads from sequential addresses on the memory
bus, and writes repeatedly to the same address on the APB bus.

Two transfer modes are supported, oneshot for transferring a known
size to or from a peripheral, and continuous for streaming data.
In continuous mode, a callback occurs when the buffer is half full
to allow the existing data to be handled and a new request queued.x

v2 changes:
	dma API no longer uses PTR_ERR
Signed-off-by: NErik Gilling <konkers@android.com>
Signed-off-by: NColin Cross <ccross@android.com>

Renames clocks in the clock init table to match the datasheet names
Signed-off-by: NColin Cross <ccross@android.com>

The Tegra SOC contains fuses to identify the CPU type and
bin, and a unique id.  The CPU info is required to determine
the correct voltages for each cpu and core frequency.
Signed-off-by: NColin Cross <ccross@android.com>

v2: fixes from Russell King:
	- include linux/io.h instead of asm/io.h
	- fix whitespace in Kconfig
	- Use spin_lock_init to initialize lock
	- Return -ENOSYS instead of BUG for unimplemented clock ops
	- Use proper return values in tegra2 clock ops
    additional changes:
	- Rename some clocks to match dev_ids
	- add rate propagation
	- add debugfs entries
	- add support for clock listed in clk_lookup under multiple dev_ids
v3:
	- Replace per-clock locking with global clock lock
	- Autodetect clock state on init
	- Let clock dividers pick next lower possible frequency
	- Add support for clock init tables
	- Minor bug fixes
	- Fix checkpatch issues
Signed-off-by: NColin Cross <ccross@android.com>

v2: Fixes from Mike Rapoport
	- remove unused header files (mach/dma.h and mach/nand.h)
	- remove tegra 1 references from Makefile.boot

v2: fixes from Russell King
	- remove mach/io.h include from mach/iomap.h
	- fix whitespace in Kconfig

v2: from Colin Cross
	- fix invalid immediate in debug-macro.S

v3:
	- allow selection of multiple boards
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NErik Gilling <konkers@android.com>