From hotplug stress test result, resetting core during enable/disable
operation can improve cpu hotplug stability.  So let's set
SRC reset bit in imx_enable_cpu() for the core when its enable bit is
accessed.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

When imx_cpu_die() is being called, the cpu should never return from the
call but just in WFI and wait for hardware to take it down.  So let's
do cpu_do_idle() repeatly in the call.  Doing this help improve the
relibility of hotplug operation.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This is very useful for detecting 'circular locking dependency' issues.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Having CONFIG_DEBUG_GPIO=y leads to several debug messages polluting kernel log:

[    0.580325] of_get_named_gpio_flags: can't parse gpios property of node '/regulators/3p3v[0]'
[    0.581185] 3P3V: 3300 mV
[    0.584827] of_get_named_gpio_flags exited with status 124
[    0.585852] vddio-sd0: 3300 mV
[    0.590023] of_get_named_gpio_flags exited with status 79
[    0.590770] fec-3v3: 3300 mV
[    0.594805] of_get_named_gpio_flags exited with status 105
[    0.595491] usb0_vbus: 5000 mV
[    0.599687] of_get_named_gpio_flags exited with status 104
[    0.600380] usb1_vbus: 5000 mV
[    0.604463] of_get_named_gpio_flags exited with status 126
[    0.605153] lcd-3v3: 3300 mV
[    0.608970] of_get_named_gpio_flags exited with status 77

Turn this option off, as these messages are not really useful for normal usage.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The imx6q_restart() works fine with normal reboot but will run into
problem with emergency reboot like sysrq-b.  In that case, of_iomap()
gets called from interrupt context and hence triggers the BUG_ON in
__get_vm_area_node().

Actually, since commit c1e31d12 (ARM: imx: create
mxc_arch_reset_init_dt() for DT boot), imx6q/dl should try to use
mxc_restart() by calling mxc_arch_reset_init_dt() beforehand, where
things like of_iomap() can be done.

The patch updates mxc_restart() a little bit to get it work for imx6q/dl
and kill imx6q_restart() completely.
Reported-by: NNathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

As mx53 is a dt-only SoC, we should retrieve the iomuxc base address from the
device tree, instead of using the old MX53_IO_ADDRESS method.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

As mx53 is a dt-only SoC, we should retrieve the tzic base address from the
device tree, instead of using the old MX53_IO_ADDRESS method.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

As mx53 is a dt-only SoC, we should retrieve the gpt base address and irq
from the device tree, instead of using the old MX53_IO_ADDRESS method.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generated by doing:

make mxs_defconfig
Manually selected the CHIPIDEA_UDC driver
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The IS_ERR() macro is defined in the linux/err.h header file, so include
it explicitly.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generated by doing:

make imx_v6_v7_defconfig
Manually selected the CHIPIDEA_UDC driver
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Generated by doing:

make imx_v6_v7_defconfig
Manually selected the IMX_SPDIF driver
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Update imx6q clock initialization and Kconfig for PCIe support.
Signed-off-by: NSean Cross <xobs@kosagi.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The i.MX6 has two general-purpose LVDS clocks that can be driven
from a variety of sources.  This patch adds a mux and a gate for
both of these clocks.
Signed-off-by: NSean Cross <xobs@kosagi.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The mx53_display_revision() declaration in common.h is stale and used
nowhere, so remove it.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The patch enables soc bus infrastructure and adds a function
imx_soc_device_init() to report soc info via soc device interface for
imx6qdl and imx6sl.  With the support, user space can get soc related
info by looking at sysfs like below.

  $ cat /sys/devices/soc0/machine
  Freescale i.MX6 Quad SABRE Smart Device Board
  $ cat /sys/devices/soc0/family
  Freescale i.MX
  $ cat /sys/devices/soc0/soc_id
  i.MX6Q
  $ cat /sys/devices/soc0/revision
  1.2
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Add imx6sl support into imx_init_revision_from_anatop(), so that it can
be used to initialize cpu type and revision on imx6sl.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The patch creates a common function imx_init_revision_from_anatop() by
merging imx6q_init_revision() and imx_anatop_get_digprog(), so that any
SoC that encodes revision info in anatop can use it to initialize
revision.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

It calls imx_set_soc_revision() to set up soc revision in
imx6q_init_revision(), and replaces all the occurrences of
imx6q_revision() with common helper imx_get_soc_revision().
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Similar to what we do for cpu type, the patch adds helper functions
imx_set_soc_revision() and imx_get_soc_revision() to maintain
imx_soc_revision in cpu.c.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Add low-level debug support for vybrid, so that earlyprintk can be
enabled for debugging early boot issue.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This flag is a NOOP since 2.6.35 and can be removed.

This is an update for 3.11 of a patch already sent for 3.10
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Config iomux-gpr1 to select clock source for fec system clock.
Clear gpr1[14], gpr1[18-17] bit to select the fec clock source
from internal anatop PLL.
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Add imx6sl iomux-gpr register field define in "imx6q-iomuxc-gpr.h" header
file, which is not fully define all iomux-gpr registers and fields, only
add fec related macro define.
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

There's a pll4_audio_div clock, an extra divider for pll4, missing
in current clock tree, thus add it.
Signed-off-by: NNicolin Chen <b42378@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NTony Prisk <linux@prisktech.co.nz>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks. The call to versatile_sched_clock_init
is moved to .init_early instead, were it is also for non-DT boards.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NJon Medhurst (Tixy) <tixy@linaro.org>
Acked-by: NPawel Moll <pawel.moll@arm.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NStephen Warren <swarren@nvidia.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks. To get rid of it, move l2cc init to
.init_machine hook instead.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NDinh Nguyen <dinguyen@altera.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NHeiko Stuebner <heiko@sntech.de>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NBarry Song <baohua.song@csr.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

This patch converts clk-imx2[38] clocksource_of_init compatible init
associated with fsl,imx2[38]-clkctrl. With arch/arm calling
of_clk_init(NULL) from time_init(), we can now also remove custom
.init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Acked-by: NShawn Guo <shawn.guo@linaro.org>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NJason Cooper <jason@lakedaemon.net>

With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>