- 04 1月, 2012 2 次提交
-
-
由 Al Viro 提交于
it's not needed anymore; we used to, back when we had to do mount_subtree() by hand, complete with put_mnt_ns() in it. No more... Apparmor didn't need it since the __d_path() fix. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
No need to duplicate them in both callers; make it return ERR_PTR(-ENOMEM) on allocation failure instead of NULL and it'll be able to report rpc_lookup_cred() failures just fine. Callers are much happier that way... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 12月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
After commit 06222e49 (fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek) the behaviour of llseek() was changed so that it always revalidates the file size. The bug appears to be due to a logic error in the afore-mentioned commit, which always evaluates to 'true'. Reported-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>=3.1]
-
- 10 12月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
...and report the servers that try to return a delegation when the client is using the CLAIM_DELEG_CUR open mode. That behaviour is explicitly forbidden in RFC3530. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
There are currently 2 places in the state recovery code, where we do not take sufficient precautions before accessing the state->lock_states. In both cases, we should be holding the state->state_lock. Reported-by: NPascal Bouchareine <pascal@gandi.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 12月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
Currently, the code assumes that the SEQUENCE status bits are mutually exclusive. They are not... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>= 2.6.34]
-
由 Trond Myklebust 提交于
If we handled an error condition, then nfs4_recovery_handle_error should return '0' so that the state recovery thread can continue. Also ensure that nfs4_check_lease() continues to abort if we haven't got any credentials by having it return ENOKEY (which is not handled). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 11月, 2011 2 次提交
-
-
由 Al Viro 提交于
takes vfsmount and relative path, does lookup within that vfsmount (possibly triggering automounts) and returns the result as root of subtree suitable for return by ->mount() (i.e. a reference to dentry and an active reference to its superblock grabbed, superblock locked exclusive). btrfs and nfs switched to it instead of open-coding the sucker. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Life is much saner if create_mnt_ns(mnt) drops mnt in case of error... Switch it to such calling conventions, switch callers, fix double mntput() in fs/nfs/super.c one. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 11月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
pNFS-specific code belongs in the pnfs layer. It should not be hijacking generic NFS read or write code paths. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 11月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
Fix a regression that was introduced by commit 0c2e53f1 (NFS: Remove the unused "lookupfh()" version of nfs4_proc_lookup()). In the case where the lookup gets an NFS4ERR_MOVED, we want to return the result of nfs4_get_referral(). Instead, that value is getting clobbered by the call to nfs4_handle_exception()... Reported-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de> Tested-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 05 11月, 2011 2 次提交
-
-
由 Jeff Layton 提交于
...a remove a set of forward declarations. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
commit d953126a changed how nfs_atomic_lookup handles an -EISDIR return from an OPEN call. Prior to that patch, that caused the client to fall back to doing a normal lookup. When that patch went in, the code began returning that error to userspace. The d_revalidate codepath however never had the corresponding change, so it was still possible to end up with a NULL ctx->state pointer after that. That patch caused a regression. When we attempt to open a directory that does not have a cached dentry, that open now errors out with EISDIR. If you attempt the same open with a cached dentry, it will succeed. Fix this by reverting the change in nfs_atomic_lookup and allowing attempts to open directories to fall back to a normal lookup Also, add a NFSv4-specific f_ops->open routine that just returns -ENOTDIR. This should never be called if things are working properly, but if it ever is, then the dprintk may help in debugging. To facilitate this, a new file_operations field is also added to the nfs_rpc_ops struct. Cc: stable@kernel.org Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 04 11月, 2011 1 次提交
-
-
由 Jeff Layton 提交于
This service should not be registered with or unregistered from rpcbind. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 03 11月, 2011 10 次提交
-
-
由 Boaz Harrosh 提交于
The ore need suplied a r4w_get_page/r4w_put_page API from Filesystem so it can get cache pages to read-into when writing parial stripes. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
Finally remove all the old raid engine, which is by now dead code. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
In this patch we are actually moving to the ORE. (Object Raid Engine). objio_state holds a pointer to an ore_io_state. Once we have an ore_io_state at hand we can call the ore for reading/writing. We register on the done path to kick off the nfs io_done mechanism. Again for Ease of reviewing the old code is "#if 0" but is not removed so the diff command works better. The old code will be removed in the next patch. fs/exofs/Kconfig::ORE is modified to also be auto-included if PNFS_OBJLAYOUT is set. Since we now depend on ORE. (See comments in fs/exofs/Kconfig) Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
For Ease of reviewing I split the move to ore into 3 parts move to ore 01: ore_layout & ore_components move to ore 02: move to ORE move to ore 03: Remove old raid engine This patch modifies the objio_lseg, layout-segment level and devices and components arrays to use the ORE types. Though it will be removed soon, also the raid engine is modified to actually compile, possibly run, with the new types. So it is the same old raid engine but with some new ORE types. For Ease of reviewing, some of the old code is "#if 0" but is not removed so the diff command works better. The old code will be removed in the 3rd patch. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
* All instances of objlayout_io_state => objlayout_io_res * All instances of state => oir; * All instances of ol_state => oir; Big but nothing to it Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
This is part of moving objio_osd to use the ORE. objlayout_io_state had two functions: 1. It was used in the error reporting mechanism at layout_return. This function is kept intact. (Later patch will rename objlayout_io_state => objlayout_io_res) 2. Carrier of rw io members into the objio_read/write_paglist API. This is removed in this patch. The {r,w}data received from NFS are passed directly to the objio_{read,write}_paglist API. The io_engine is now allocating it's own IO state as part of the read/write. The minimal functionality that was part of the generic allocation is passed to the io_engine. So part of this patch is rename of: ios->ol_state.foo => ios->foo At objlayout_{read,write}_done an objlayout_io_state is passed that denotes the result of the IO. (Hence the later name change). If the IO is successful objlayout calls an objio_free_result() API immediately (Which for objio_osd causes the release of the io_state). If the IO ended in an error it is hanged onto until reported in layout_return and is released later through the objio_free_result() API. (All this is not new just renamed and cleaned) Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
objlayout driver was always returning PNFS_ATTEMPTED from it's read/write_pagelist operations. Even on error. Fix that. Start by establishing an error return API from io-engine, by not returning ssize_t (length-or-error) but returning "int" 0=OK, 0>Error. And clean up all return types in io-engine. Then if io-engine returned error return PNFS_NOT_ATTEMPTED to generic layer. (With a dprint) Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
The EOF calculation was done on .read_pagelist(), cached in objlayout_io_state->eof, and set in objlayout_read_done() into nfs_read_data->res.eof. So set it directly into nfs_read_data->res.eof and avoid the extra member. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Rakib Mullick 提交于
When CONFIG_NFS=y and CONFIG_NFS_V3_{,V4}=n we get the following warning. fs/nfs/write.c: In function ‘nfs_writeback_done’: fs/nfs/write.c:1246:21: warning: unused variable ‘server’ Remove the variable 'server' to fix the above warning. Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Rakib Mullick 提交于
Fix the following unused variable warning. fs/nfs/file.c: In function ‘nfs_file_release’: fs/nfs/file.c:140:17: warning: unused variable ‘dentry’ fs/nfs/file.c: In function ‘nfs_file_read’: fs/nfs/file.c:237:9: warning: unused variable ‘count’ Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 02 11月, 2011 2 次提交
-
-
由 Miklos Szeredi 提交于
Replace remaining direct i_nlink updates with a new set_nlink() updater function. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Miklos Szeredi 提交于
Replace direct i_nlink updates with the respective updater function (inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count). Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
-
- 01 11月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
Some files were using the complete module.h infrastructure without actually including the header at all. Fix them up in advance so once the implicit presence is removed, we won't get failures like this: CC [M] fs/nfsd/nfssvc.o fs/nfsd/nfssvc.c: In function 'nfsd_create_serv': fs/nfsd/nfssvc.c:335: error: 'THIS_MODULE' undeclared (first use in this function) fs/nfsd/nfssvc.c:335: error: (Each undeclared identifier is reported only once fs/nfsd/nfssvc.c:335: error: for each function it appears in.) fs/nfsd/nfssvc.c: In function 'nfsd': fs/nfsd/nfssvc.c:555: error: implicit declaration of function 'module_put_and_exit' make[3]: *** [fs/nfsd/nfssvc.o] Error 1 Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
These files were getting <linux/module.h> via an implicit include path, but we want to crush those out of existence since they cost time during compiles of processing thousands of lines of headers for no reason. Give them the lightweight header that just contains the EXPORT_SYMBOL infrastructure. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 31 10月, 2011 5 次提交
-
-
由 Chuck Lever 提交于
Introduced by commit 16b374ca "NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure" (October 20, 2010). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Remove superfluous logic at the tail of nfs4_xdr_dec_secinfo() . Introduced by commit 5a5ea0d4 "NFS: Add secinfo procedure" (March 24, 2011). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: the first parameter of nfs_create_request() has been incorrectly documented since time immemorial (OK, since before 2.6.12). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
craa_type_mask is bitmap4 per RFC5661. We need to expect a length before extracting bitmap value. Cc: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
Current pnfs_layoutcommit_inode can not handle parallel layoutcommit. And as Trond suggested , there is no need for client to optimize for parallel layoutcommit. So add NFS_INO_LAYOUTCOMMITTING flag to mark inflight layoutcommit and serialize lalyoutcommit with it. Also mark_inode_dirty_sync if pnfs_layoutcommit_inode fails to issue layoutcommit. Reported-by: NVitaliy Gusev <gusev.vitaliy@nexenta.com> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 10月, 2011 2 次提交
-
-
由 Andi Kleen 提交于
This makes NFS follow the standard generic_file_llseek locking scheme. Cc: Trond.Myklebust@netapp.com Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Andi Kleen 提交于
The i_mutex lock use of generic _file_llseek hurts. Independent processes accessing the same file synchronize over a single lock, even though they have no need for synchronization at all. Under high utilization this can cause llseek to scale very poorly on larger systems. This patch does some rethinking of the llseek locking model: First the 64bit f_pos is not necessarily atomic without locks on 32bit systems. This can already cause races with read() today. This was discussed on linux-kernel in the past and deemed acceptable. The patch does not change that. Let's look at the different seek variants: SEEK_SET: Doesn't really need any locking. If there's a race one writer wins, the other loses. For 32bit the non atomic update races against read() stay the same. Without a lock they can also happen against write() now. The read() race was deemed acceptable in past discussions, and I think if it's ok for read it's ok for write too. => Don't need a lock. SEEK_END: This behaves like SEEK_SET plus it reads the maximum size too. Reading the maximum size would have the 32bit atomic problem. But luckily we already have a way to read the maximum size without locking (i_size_read), so we can just use that instead. Without i_mutex there is no synchronization with write() anymore, however since the write() update is atomic on 64bit it just behaves like another racy SEEK_SET. On non atomic 32bit it's the same as SEEK_SET. => Don't need a lock, but need to use i_size_read() SEEK_CUR: This has a read-modify-write race window on the same file. One could argue that any application doing unsynchronized seeks on the same file is already broken. But for the sake of not adding a regression here I'm using the file->f_lock to synchronize this. Using this lock is much better than the inode mutex because it doesn't synchronize between processes. => So still need a lock, but can use a f_lock. This patch implements this new scheme in generic_file_llseek. I dropped generic_file_llseek_unlocked and changed all callers. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 21 10月, 2011 1 次提交
-
-
由 Malahal Naineni 提交于
As soon as the nfs_client gets created, its cl_rpcclient is set to ERR_PTR(-EINVAL). The rpc client structure is allocated later. Check if the client is ready before using the cl_rpcclient pointer. Signed-off-by: NMalahal Naineni <malahal@us.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 10月, 2011 4 次提交
-
-
由 Trond Myklebust 提交于
We don't need a mempool in order to guarantee reliable NFS read performance. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Don't rely on the PageError flag to tell us if one of the partial reads of the page failed. Instead, replace that with a dedicated flag in the struct nfs_page. Then clean out redundant uses of the PageError flag: the VM no longer checks it for reads. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The generic file read code does that for us anyway. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It can trivially be replaced with rpc_restart_call_prepare. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-