- 28 7月, 2017 10 次提交
-
-
https://github.com/01org/gvt-linux由 Daniel Vetter 提交于
gvt-fixes-2017-07-26 - Turn on KBL support for more SKUs (Jianjun) - Fix vblank timer close bug (Fred) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170726075621.hrauvik62gi2jecj@zhen-hp.sh.intel.com
-
由 Maarten Lankhorst 提交于
ddb_allocation && ddb_allocation / blocks_per_line >= 1 is the same as ddb_allocation >= blocks_per_line, so use the latter to simplify this. This fixes the following compiler warning: drivers/gpu/drm/i915/intel_pm.c:4467]: (warning) Comparison of a boolean expression with an integer other than 0 or 1. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: d555cb58 ("drm/i915/skl+: use linetime latency if ddb size is not available") Cc: "Mahesh Kumar" <mahesh1.kumar@intel.com> Reported-by: NDavid Binderman <dcb314@hotmail.com> Cc: David Binderman <dcb314@hotmail.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+ Reviewed-by: NMahesh Kumar <mahesh1.kumar@intel.com> (cherry picked from commit 54d20ed1) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170717111355.4523-1-maarten.lankhorst@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
由 Chris Wilson 提交于
The goal here was to minimise doing any thing or any check inside the kernel that was not strictly required. For a userspace that assumes complete control over the cache domains, the kernel is usually using outdated information and may trigger clflushes where none were required. However, swapping is a situation where userspace has no knowledge of the domain transfer, and will leave the object in the CPU cache. The kernel must flush this out to the backing storage prior to use with the GPU. As we use an asynchronous task tracked by an implicit fence for this, we also need to cancel the ASYNC flag on the object so that the object will wait for the clflush to complete before being executed. This also absolves userspace of the responsibility imposed by commit 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") that its needed to ensure that the object was out of the CPU cache prior to use on the GPU. Fixes: 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101571Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: NJason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-5-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 0f46daa1) Cc: stable@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Chris Wilson 提交于
I was being overly paranoid in not updating the execobject.offset after performing the fallback copy where we set reloc.presumed_offset to -1. The thinking was to ensure that a subsequent NORELOC execbuf would be forced to process the invalid relocations. However this is overkill so long as we *only* update the execobject.offset following a successful update of the relocation value witin the batch. If we have to repeat the execbuf due to a later interruption, then we may skip the relocations on the second pass (honouring NORELOC) since the execobject.offset match the actual offsets (even though reloc.presumed_offset is garbage). Subsequent calls to execbuf with NORELOC should themselves ensure that the reloc.presumed_offset have been corrected in case of future migration. Reporting back the actual execobject.offset, even when reloc.presumed_offset is garbage, ensures that reuse of those objects use the latest information to avoid relocations. Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101635Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-4-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 1f727d9e) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Chris Wilson 提交于
If we fail to acquire a fence (for old school fenced GPU access) then we unwind the vma reservation, including its pin. However, we were making the execobject as holding the pin before erring out, leading to a double unpin: [ 3193.991802] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:287! [ 3193.998131] invalid opcode: 0000 [#1] PREEMPT SMP [ 3194.002816] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me e1000e mei prime_numbers ptp pps_core [last unloaded: i915] [ 3194.022841] CPU: 0 PID: 8123 Comm: kms_flip Tainted: G U 4.13.0-rc1-CI-CI_DRM_471+ #1 [ 3194.031765] Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A04 11/05/2007 [ 3194.040343] task: ffff8800785d4c40 task.stack: ffffc90001768000 [ 3194.046339] RIP: 0010:eb_release_vmas.isra.6+0x119/0x180 [i915] [ 3194.052234] RSP: 0018:ffffc9000176ba80 EFLAGS: 00010246 [ 3194.057439] RAX: 00000000000003c0 RBX: ffff8800710fc2d8 RCX: ffff8800588e4f48 [ 3194.064546] RDX: ffffffff1fffffff RSI: 00000000ffffffff RDI: ffff8800588e00d0 [ 3194.071654] RBP: ffffc9000176bab0 R08: 0000000000000000 R09: 0000000000000000 [ 3194.078761] R10: 0000000000000040 R11: 0000000000000001 R12: ffff880060822f00 [ 3194.085867] R13: 0000000000000310 R14: 00000000000003b8 R15: ffffc9000176bbb0 [ 3194.092975] FS: 00007fd2b94aba40(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000 [ 3194.101033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3194.106754] CR2: 00007ffbec3ff000 CR3: 0000000074e67000 CR4: 00000000000006f0 [ 3194.113861] Call Trace: [ 3194.116321] eb_relocate_slow+0x67/0x4e0 [i915] [ 3194.120861] i915_gem_do_execbuffer+0x429/0x1260 [i915] [ 3194.126070] ? lock_acquire+0xb5/0x210 [ 3194.129803] ? __might_fault+0x39/0x90 [ 3194.133563] i915_gem_execbuffer2+0x9b/0x1b0 [i915] [ 3194.138447] ? i915_gem_execbuffer+0x2b0/0x2b0 [i915] [ 3194.143478] drm_ioctl_kernel+0x64/0xb0 [ 3194.147298] drm_ioctl+0x2cd/0x390 [ 3194.150710] ? i915_gem_execbuffer+0x2b0/0x2b0 [i915] [ 3194.155741] ? finish_task_switch+0xa5/0x210 [ 3194.159993] ? finish_task_switch+0x6a/0x210 [ 3194.164247] do_vfs_ioctl+0x90/0x670 [ 3194.167806] ? entry_SYSCALL_64_fastpath+0x5/0xb1 [ 3194.172492] ? __this_cpu_preempt_check+0x13/0x20 [ 3194.177176] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 3194.181946] SyS_ioctl+0x3c/0x70 [ 3194.185159] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 3194.189756] RIP: 0033:0x7fd2b76a8587 [ 3194.193314] RSP: 002b:00007fff074845b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 3194.200855] RAX: ffffffffffffffda RBX: ffffffff8146da43 RCX: 00007fd2b76a8587 [ 3194.207962] RDX: 00007fff074846e0 RSI: 0000000040406469 RDI: 0000000000000003 [ 3194.215068] RBP: ffffc9000176bf88 R08: 0000000000000000 R09: 0000000000000003 [ 3194.222175] R10: 00007fd2b796bb58 R11: 0000000000000246 R12: 00007fff07484880 [ 3194.229280] R13: 0000000000000003 R14: 0000000040406469 R15: 0000000000000000 [ 3194.236386] ? __this_cpu_preempt_check+0x13/0x20 [ 3194.241070] Code: 24 b0 00 00 00 48 85 c9 0f 84 6c ff ff ff 8b 41 20 85 c0 7e 73 83 e8 01 89 41 20 41 8b 84 24 e8 00 00 00 a8 0f 0f 85 5f ff ff ff <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d f3 c3 49 8b 84 [ 3194.259943] RIP: eb_release_vmas.isra.6+0x119/0x180 [i915] RSP: ffffc9000176ba80 [ 3194.268047] ---[ end trace 1d7348c6575d8800 ]--- [ 3673.658819] softdog: Initiating panic [ 3673.662471] Kernel panic - not syncing: Software Watchdog Timer expired [ 3673.669066] Kernel Offset: disabled [ 3673.672541] Rebooting in 1 seconds.. Reported-by: NTomi Sarvela <tomi.p.sarvela@intel.com> Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-3-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 1da7b54c) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Chris Wilson 提交于
After we detect a i915_vma pin overflow, we call __i915_vma_unpin to cleanup. However, on an overflow the pin_count bitfield will be zero, triggering an assertion, even though we the intention is to merely warn and report the error back to the user (as historically the culprit has be a leak in the display code). Fixes: 20dfbde4 ("drm/i915: Wrap vma->pin_count accessors with small inline helpers") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-2-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 67fddd90) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Navare, Manasi D 提交于
The condition for setting the Loadgen Select bit of PORT_TX_DW4 register during DDI Vswing Sequence should be Bit rate <=6 GHz whereas the existing code checks only Bit Rate < 6GHz. This patch fixes this condition. While at it also remove the redundant paranthesis. Fixes: cf54ca8b ("drm/i915/cnl: Implement voltage swing sequence.") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NManasi Navare <manasi.d.navare@intel.com> Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500329122-32662-1-git-send-email-manasi.d.navare@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit a8e45a1c) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Imre Deak 提交于
The scaler allocation code depends on a non-zero default value for the crtc scaler_id, so make sure we initialize the scaler state accordingly even if the crtc is off. This fixes at least an initial YUV420 modeset (added in a follow-up patchset by Shashank) when booting with the screen off: after the initial HW readout and modeset which enables the scaler a subsequent modeset will disable the scaler which isn't properly allocated. This results in a funky HW state where the pipe scaler HW registers can't be modified and the normally black screen is grey and shifted to the right or jitters. The problem was revealed by Shashank's YUV420 patchset and first reported by Ville. v2: - In the stable tag also include versions which need backporting (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chandra Konduru <chandra.konduru@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # 4.2.x Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Fixes: a1b2278e ("drm/i915: skylake panel fitting using shared scalers") Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NMahesh Kumar <mahesh1.kumar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720112820.26816-1-imre.deak@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 5fb9dadf) Cc: stable@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Christophe JAILLET 提交于
Goto the right label in case of error, otherwise there is a leak. This has been introduced by c5cf9a91. In this patch a goto has not been updated. Fixes: c5cf9a91 ("drm/i915: Create a kmem_cache to allocate struct i915_priolist from") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20170719223503.30580-1-christophe.jaillet@wanadoo.frReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit a5ec7fe8) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Daniel Vetter 提交于
Taking the modeset locks unconditionally isn't the greatest idea, because atm that part is still broken and times out (and then atomic keels over). And there's really no reason to do so, the old code didn't do that either. To make the patch a bit simpler let's also nuke 2 cases that are only around for the old mmioflip paths. Atomic nonblocking workers will not die (minus bugs) when a gpu reset happens. And of course this doesn't fix any of the gpu reset vs. modeset deadlock fun, but it at least stop modern CI machines from keeling over all over the place for no reason at all. And we still have the explicit testcases to run the fake gpu reset, so coverage isn't that much worse. v2: Split out additional changes on top, restrict this to purely reducing the critical section of modeset locks. v2: Review from Maarten - update comments - don't oops when state is NULL in intel_finish_reset, but try to at least still drop locks properly. The hw is going to be toast anyway. Fixes: 73974893 ("drm/i915: Fix modeset handling during gpu reset, v5.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170719125502.25696-3-daniel.vetter@ffwll.ch (cherry picked from commit ce87ea15) Cc: stable@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 27 7月, 2017 2 次提交
-
-
由 Ville Syrjälä 提交于
Turns out that just writing CURPOS isn't sufficient to move the cursor on some platforms. My 830 works just fine, but eg. 945 and PNV don't. On those platforms we need to arm even the CURPOS update with a CURBASE write. Even worse, a write to any of the cursor register apart from CURBASE will cancel an already pending cursor update. So if we have armed a CURCNTR/CURBASE update, a subsequent CURPOS write prior to vblank would cancel that armed update. Thus we're left with a cursor that doesn't appear to move, or even change shape. Fix the problem by always performing the CURBASE write after a CURPOS write. Bspec is somewhat unclear which platforms actually require this CURBASE write and which don't. So to keep it simple and to make sure we really fix the problem across all supported devices, let's just perform the CURBASE write unconditionally. Cc: Paul Menzel <pmenzel@molgen.mpg.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101790 Fixes: 75343a44 ("drm/i915: Drop useless posting reads from cursor commit") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Tested-by: NPaul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170714155227.6089-1-ville.syrjala@linux.intel.com (cherry picked from commit 8753d2bc) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Imre Deak 提交于
Fix the sizeof(ptr) vs. sizeof(*ptr) typo. Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170714151242.517-2-imre.deak@intel.com (cherry picked from commit edd9003f) Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 25 7月, 2017 1 次提交
-
-
由 Jian Jun Chen 提交于
Extend KBL platform support in GVT-g. Validation tests are done on KBL server and KBL NUC. Both show the same quality. Signed-off-by: NJian Jun Chen <jian.jun.chen@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
-
- 24 7月, 2017 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This adds a perl script to actually parse the MAINTAINERS file, clean up some whitespace in it, warn about errors in it, and then properly sort the end result. My perl-fu is atrocious, so the script has basically been created by randomly putting various characters in a pile, mixing them around, and then looking it the end result does anything interesting when used as a perl script. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Prepping for scripting the MAINTAINERS file cleanup (and possible split) showed a couple of cases where the headers for a couple of entries were bogus. There's a few different kinds of bogosities: - the X-GENE SOC EDAC case was confused and split over two lines - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all different things. - the NOKIA N900 CAMERA SUPPORT" was duplicated all of which were more obvious when you started doing associative arrays in perl to track these things by the header (so that we can alphabetize this thing properly, and so that we might split it up by the data too). Cc: Joe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fixes from Juergen Gross: "Some fixes and cleanups for running under Xen" * tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't online new memory initially xen/x86: fix cpu hotplug xen/grant-table: log the lack of grants xen/x86: Don't BUG on CPU0 offlining
-
- 23 7月, 2017 6 次提交
-
-
由 Juergen Gross 提交于
When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Juergen Gross 提交于
Commit dc6416f1 ("xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()") introduced an error leading to a stack overflow of the idle task when a cpu was brought offline/online many times: by calling cpu_startup_entry() instead of returning at the end of xen_play_dead() do_idle() would be entered again and again. Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing to return from xen_play_dead(). Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Wengang Wang 提交于
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a leftover from ancient times when CPU0 hotplug was impossible, it works just fine for HVM. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Avoid buffer overruns in applesmc driver" * tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (applesmc) Avoid buffer overruns
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix TIOCGPTPEER ioctl definition tty: hide unused pty_get_peer function tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART serial: imx: Prevent TX buffer PIO write when a DMA has been started Revert "serial: imx-serial - move DMA buffer configuration to DT" serial: sh-sci: Uninitialized variables in sysfs files serial: st-asc: Potential error pointer dereference
-
- 22 7月, 2017 17 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 4.13-rc2. All fix reported problems with 4.13-rc1 or older kernels (like the binder fixes). Full details in the shortlog. All have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: w1: omap-hdq: fix error return code in omap_hdq_probe() regmap: regmap-w1: Fix build troubles w1: Fix slave count on 1-Wire bus (resend) mux: mux-core: unregister mux_class in mux_exit() mux: remove the Kconfig question for the subsystem nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse drivers/fsi: fix fsi_slave_mode prototype fsi: core: register with postcore_initcall thunderbolt: Correct access permissions for active NVM contents vmbus: re-enable channel tasklet spmi: pmic-arb: Always allocate ppid_to_apid table MAINTAINERS: Add entry for SPMI subsystem spmi: Include OF based modalias in device uevent binder: Use wake up hint for synchronous transactions. binder: use group leader instead of open thread Revert "android: binder: Sanity check at binder ioctl"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some small USB fixes for 4.13-rc2. The usual batch, gadget fixes for reported issues, as well as xhci fixes, and a small random collection of other fixes for reported issues. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) xhci: fix memleak in xhci_run() usb: xhci: fix spinlock recursion for USB2 test mode xhci: fix 20000ms port resume timeout usb: xhci: Issue stop EP command only when the EP state is running xhci: Bad Ethernet performance plugged in ASM1042A host xhci: Fix NULL pointer dereference when cleaning up streams for removed host usb: renesas_usbhs: gadget: disable all eps when the driver stops usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen() usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd() usb: gadget: f_uac2: endianness fixes. usb: gadget: f_uac1: endianness fixes. include: usb: audio: specify exact endiannes of descriptors usb: gadget: udc: start_udc() can be static usb: dwc2: gadget: On USB RESET reset device address to zero usb: storage: return on error to avoid a null pointer dereference usb: typec: include linux/device.h in ucsi.h USB: cdc-acm: add device-id for quirky printer usb: dwc3: gadget: only unmap requests from DMA if mapped ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for reported issues for 4.13-rc2. Also in here is a new driver, the virtualbox DRM driver. It's stand-alone and got acks from the DRM developers to go in through this tree. It's a new thing, but it should be fine for this point in the rc cycle due to it being independent. All of this has been in linux-next for a while with no reported issues" * tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: add TL-WN722N v2 support staging: speakup: safely register and unregister ldisc staging: speakup: add functions to register and unregister ldisc staging: speakup: safely close tty staging: sm750fb: avoid conflicting vesafb staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code staging: vboxvideo: Add vboxvideo to drivers/staging staging: sm750fb: fixed a assignment typo staging: rtl8188eu: memory leak in rtw_free_cmd_obj() staging: vchiq_arm: fix error codes in probe staging: comedi: ni_mio_common: fix AO timer off-by-one regression
-
由 Randy Dunlap 提交于
Fix major alphabetic errors. No attempt to fix items that all begin with the same word (like ARM, BROADCOM, DRM, EDAC, FREESCALE, INTEL, OMAP, PCI, SAMSUNG, TI, USB, etc.). (diffstat +/- is different by one line because TI KEYSTONE MULTICORE had 2 blank lines after it.) Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Anna Schumaker: "Stable bugfix: - Fix error reporting regression Bugfixes: - Fix setting filelayout ds address race - Fix subtle access bug when using ACLs - Fix setting mnt3_counts array size - Fix a couple of pNFS commit races" * tag 'nfs-for-4.13-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS/filelayout: Fix racy setting of fl->dsaddr in filelayout_check_deviceid() NFS: Be more careful about mapping file permissions NFS: Store the raw NFS access mask in the inode's access cache NFSv3: Convert nfs3_proc_access() to use nfs_access_set_mask() NFS: Refactor NFS access to kernel access mask calculation net/sunrpc/xprt_sock: fix regression in connection error reporting. nfs: count correct array for mnt3_counts array size Revert commit 722f0b89 ("pNFS: Don't send COMMITs to the DSes if...") pNFS/flexfiles: Handle expired layout segments in ff_layout_initiate_commit() NFS: Fix another COMMIT race in pNFS NFS: Fix a COMMIT race in pNFS mount: copy the port field into the cloned nfs_server structure. NFS: Don't run wake_up_bit() when nobody is waiting... nfs: add export operations
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs fixes from Miklos Szeredi: "This fixes a crash with SELinux and several other old and new bugs" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: check for bad and whiteout index on lookup ovl: do not cleanup directory and whiteout index entries ovl: fix xattr get and set with selinux ovl: remove unneeded check for IS_ERR() ovl: fix origin verification of index dir ovl: mark parent impure on ovl_link() ovl: fix random return value on mount
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A small set of fixes for -rc2 - two fixes for BFQ, documentation and code, and a removal of an unused variable in nbd. Outside of that, a small collection of fixes from the usual crew on the nvme side" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: don't report 0-bytes in serial number nvmet: preserve controller serial number between reboots nvmet: Move serial number from controller to subsystem nvmet: prefix version configfs file with attr nvme-pci: Fix an error handling path in 'nvme_probe()' nvme-pci: Remove nvme_setup_prps BUG_ON nvme-pci: add another device ID with stripe quirk nvmet-fc: fix byte swapping in nvmet_fc_ls_create_association nvme: fix byte swapping in the streams code nbd: kill unused ret in recv_work bfq: dispatch request to prevent queue stalling after the request completion bfq: fix typos in comments about B-WF2Q+ algorithm
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull more rdma fixes from Doug Ledford: "As per my previous pull request, there were two drivers that each had a rather large number of legitimate fixes still to be sent. As it turned out, I also missed a reasonably large set of fixes from one person across the stack that are all important fixes. All in all, the bnxt_re, i40iw, and Dan Carpenter are 3/4 to 2/3rds of this pull request. There were some other random fixes that I didn't send in the last pull request that I added to this one. This catches the rdma stack up to the fixes from up to about the beginning of this week. Any more fixes I'll wait and batch up later in the -rc cycle. This will give us a good base to start with for basing a for-next branch on -rc2. Summary: - i40iw fixes - bnxt_re fixes - Dan Carpenter bugfixes across stack - ten more random fixes, no more than two from any one person" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) RDMA/core: Initialize port_num in qp_attr RDMA/uverbs: Fix the check for port number IB/cma: Fix reference count leak when no ipv4 addresses are set RDMA/iser: don't send an rkey if all data is written as immadiate-data rxe: fix broken receive queue draining RDMA/qedr: Prevent memory overrun in verbs' user responses iw_cxgb4: don't use WR keys/addrs for 0 byte reads IB/mlx4: Fix CM REQ retries in paravirt mode IB/rdmavt: Setting of QP timeout can overflow jiffies computation IB/core: Fix sparse warnings RDMA/bnxt_re: Fix the value reported for local ack delay RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cq RDMA/bnxt_re: Fix return value of poll routine RDMA/bnxt_re: Enable atomics only if host bios supports RDMA/bnxt_re: Specify RDMA component when allocating stats context RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QP RDMA/bnxt_re: Report supported value to IB stack in query_device RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing error RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontext ...
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of fixes for rc2: two imx regressions, vc4 fix, dma-buf fix, some displayport mst fixes, and an amdkfd fix. Nothing too crazy, I assume we just haven't see much rc1 testing yet" * tag 'drm-fixes-for-v4.13-rc2' of git://people.freedesktop.org/~airlied/linux: drm/mst: Avoid processing partially received up/down message transactions drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req() drm/mst: Fix error handling during MST sideband message reception drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure drm/imx: fix typo in ipu_plane_formats[] drm/vc4: Fix VBLANK handling in crtc->enable() path dma-buf/fence: Avoid use of uninitialised timestamp drm/amdgpu: Remove unused field kgd2kfd_shared_resources.num_mec drm/radeon: Remove initialization of shared_resources.num_mec drm/amdkfd: Remove unused references to shared_resources.num_mec drm/amdgpu: Fix KFD oversubscription by tracking queues correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes from Steven Rostedt: "Three minor updates - Use the new GFP_RETRY_MAYFAIL to be more aggressive in allocating memory for the ring buffer without causing OOMs - Fix a memory leak in adding and removing instances - Add __rcu annotation to be able to debug RCU usage of function tracing a bit better" * tag 'trace-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: trace: fix the errors caused by incompatible type of RCU variables tracing: Fix kmemleak in instance_rmdir tracing/ring_buffer: Try harder to allocate
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "A bunch of small fixes for x86" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: hyperv: avoid livelock in oneshot SynIC timers KVM: VMX: Fix invalid guest state detection after task-switch emulation x86: add MULTIUSER dependency for KVM KVM: nVMX: Disallow VM-entry in MOV-SS shadow KVM: nVMX: track NMI blocking state separately for each VMCS KVM: x86: masking out upper bits
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "A handful of fixes, mostly for new code: - some reworking of the new STRICT_KERNEL_RWX support to make sure we also remove executable permission from __init memory before it's freed. - a fix to some recent optimisations to the hypercall entry where we were clobbering r12, this was breaking nested guests (PR KVM). - a fix for the recent patch to opal_configure_cores(). This could break booting on bare metal Power8 boxes if the kernel was built without CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG. - .. and finally a workaround for spurious PMU interrupts on Power9 DD2. Thanks to: Nicholas Piggin, Anton Blanchard, Balbir Singh" * tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y powerpc/mm/hash: Refactor hash__mark_rodata_ro() powerpc/mm/radix: Refactor radix__mark_rodata_ro() powerpc/64s: Fix hypercall entry clobbering r12 input powerpc/perf: Avoid spurious PMU interrupts after idle powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Half of the fixes are for various build time warnings triggered by randconfig builds. Most (but not all...) were harmless. There's also: - ACPI boundary condition fixes - UV platform fixes - defconfig updates - an AMD K6 CPU init fix - a %pOF printk format related preparatory change - .. and a warning fix related to the tlb/PCID changes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/devicetree: Convert to using %pOF instead of ->full_name x86/platform/uv/BAU: Disable BAU on single hub configurations x86/platform/intel-mid: Fix a format string overflow warning x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUG x86/build: Silence the build with "make -s" x86/io: Add "memory" clobber to insb/insw/insl/outsb/outsw/outsl x86/fpu/math-emu: Avoid bogus -Wint-in-bool-context warning x86/fpu/math-emu: Fix possible uninitialized variable use perf/x86: Shut up false-positive -Wmaybe-uninitialized warning x86/defconfig: Remove stale, old Kconfig options x86/ioapic: Pass the correct data to unmask_ioapic_irq() x86/acpi: Prevent out of bound access caused by broken ACPI tables x86/mm, KVM: Fix warning when !CONFIG_PREEMPT_COUNT x86/platform/uv/BAU: Fix congested_response_us not taking effect x86/cpu: Use indirect call to measure performance in init_amd_k6()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Ingo Molnar: "A timer_irq_init() clocksource API robustness fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-of: Handle of_irq_get_byname() result correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "A cputime fix and code comments/organization fix to the deadline scheduler" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix confusing comments about selection of top pi-waiter sched/cputime: Don't use smp_processor_id() in preemptible context
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Two hw-enablement patches, two race fixes, three fixes for regressions of semantics, plus a number of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add proper condition to run sched_task callbacks perf/core: Fix locking for children siblings group read perf/core: Fix scheduling regression of pinned groups perf/x86/intel: Fix debug_store reset field for freq events perf/x86/intel: Add Goldmont Plus CPU PMU support perf/x86/intel: Enable C-state residency events for Apollo Lake perf symbols: Accept zero as the kernel base address Revert "perf/core: Drop kernel samples even though :u is specified" perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target perf evsel: State in the default event name if attr.exclude_kernel is set perf evsel: Fix attr.exclude_kernel setting for default cycles:p
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixlet from Ingo Molnar: "Remove an unnecessary priority adjustment in the rtmutex code" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Remove unnecessary priority adjustment
-