The length must be given as bytes and not as 4 bit tuples.
Reviewed-by: NScott Bauer <scott.bauer@intel.com>
Signed-off-by: NJonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The current BSG design tries to shoe-horn the transport-specific
passthrough commands into the overall framework for SCSI passthrough
requests.  This has a couple problems:

 - each passthrough queue has to set the QUEUE_FLAG_SCSI_PASSTHROUGH flag
   despite not dealing with SCSI commands at all.  Because of that these
   queues could also incorrectly accept SCSI commands from in-kernel
   users or through the legacy SCSI_IOCTL_SEND_COMMAND ioctl.
 - the real SCSI bsg queues also incorrectly accept bsg requests of the
   BSG_SUB_PROTOCOL_SCSI_TRANSPORT type
 - the bsg transport code is almost unredable because it tries to reuse
   different SCSI concepts for its own purpose.

This patch instead adds a new bsg_ops structure to handle the two cases
differently, and thus solves all of the above problems.  Another side
effect is that the bsg-lib queues also don't need to embedd a
struct scsi_request anymore.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Users of the bsg-lib interface should only use the bsg_job data structure
and not know about implementation details of it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The zfcp driver wants to know the timeout for a bsg job, so add a field
to struct bsg_job for it in preparation of not exposing the request
to the bsg-lib users.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This flag was added by fe0f07d0 ("direct-io: only inc/deci
inode->i_dio_count for file systems") as means to optimise the atomic
modificaiton of the variable for blockdevices. However with the advent
of 542ff7bf ("block: new direct I/O implementation") it became
unused. So let's remove it.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This flag was added by 60392573 ("direct-io: add flag to allow aio
writes beyond i_size") to support XFS. However, with the rework of
XFS' DIO's path to use iomap in acdda3aa ("xfs: use iomap_dio_rw")
it became redundant. So let's remove it.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To help folks like me that use scripts/get_maintainer.pl.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Avoid that building with W=1 causes the kernel-doc tool to complain
about undocumented function arguments for the blk-zoned.c source file.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.

PID: 6766   TASK: ffff88007b2a6dd0  CPU: 0   COMMAND: "mount"
 #0 [ffff880078447ae0] __schedule at ffffffff8168d605
 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49
 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995
 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef
 #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod]
 #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50
 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3
 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs]
 #8 [ffff880078447da8] mount_bdev at ffffffff81202570
 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs]
#10 [ffff880078447e28] mount_fs at ffffffff81202d09
#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f
#12 [ffff880078447ea8] do_mount at ffffffff81220fee
#13 [ffff880078447f28] sys_mount at ffffffff812218d6
#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007fd9ea914e9a  RSP: 00007ffd5d9bf648  RFLAGS: 00010246
    RAX: 00000000000000a5  RBX: ffffffff81698c49  RCX: 0000000000000010
    RDX: 00007fd9ec2bc210  RSI: 00007fd9ec2bc290  RDI: 00007fd9ec2bcf30
    RBP: 0000000000000000   R8: 0000000000000000   R9: 0000000000000010
    R10: 00000000c0ed0001  R11: 0000000000000206  R12: 00007fd9ec2bc040
    R13: 00007fd9eb6b2380  R14: 00007fd9ec2bc210  R15: 00007fd9ec2bcf30
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

This task was trying to mount the cdrom.  It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.

PID: 6785   TASK: ffff880078720fb0  CPU: 0   COMMAND: "systemd-udevd"
 #0 [ffff880078417898] __schedule at ffffffff8168d605
 #1 [ffff880078417900] schedule at ffffffff8168dc59
 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605
 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838
 #4 [ffff8800784179d0] down_read at ffffffff8168cde0
 #5 [ffff8800784179e8] get_super at ffffffff81201cc7
 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de
 #7 [ffff880078417a40] flush_disk at ffffffff8123a94b
 #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50
 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom]
#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod]
#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86
#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65
#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b
#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7
#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf
#16 [ffff880078417d00] do_last at ffffffff8120d53d
#17 [ffff880078417db0] path_openat at ffffffff8120e6b2
#18 [ffff880078417e48] do_filp_open at ffffffff8121082b
#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33
#20 [ffff880078417f70] sys_open at ffffffff811fde4e
#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007f29438b0c20  RSP: 00007ffc76624b78  RFLAGS: 00010246
    RAX: 0000000000000002  RBX: ffffffff81698c49  RCX: 0000000000000000
    RDX: 00007f2944a5fa70  RSI: 00000000000a0800  RDI: 00007f2944a5fa70
    RBP: 00007f2944a5f540   R8: 0000000000000000   R9: 0000000000000020
    R10: 00007f2943614c40  R11: 0000000000000246  R12: ffffffff811fde4e
    R13: ffff880078417f78  R14: 000000000000000c  R15: 00007f2944a4b010
    ORIG_RAX: 0000000000000002  CS: 0033  SS: 002b

This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.

The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.

This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Apparently the LaTex abbreviation for the German "sharp s" (ß)
(Unicode U+00DF) has changed from {\sz} to {\ss}.  With {\sz},
I get this error at line 1016 (line number after another patch):

! Undefined control sequence.
l.1016 ...nel~2.0.  Further thanks to Heiko Ei{\sz
                                                  }feldt,

This is fixed by changing the {\sz} to {\ss}.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Documentation updates for Documentation/cdrom/cdrom-standard.tex:

cdrom_device_ops:
- add check_events() and generic_packet()

cdrom_device_info:
- add one 'const' modifier
- correct some field descriptions
- add some missing fields
- drop 'kdev_t dev;' field

Also drop <n_discs> sentence from documentation because it is not
referenced anywhere in the kernel header or C files.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch helps to avoid that new code gets introduced in block drivers
that manipulates queue flags without holding the queue lock when that
lock should be held.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Since it is not safe to use queue_flag_(set|clear)_unlocked()
without holding the queue lock after the sysfs entries for a
queue have been created, complain if this happens.

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch has been generated as follows:

for verb in set_unlocked clear_unlocked set clear; do
  replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
    $(git grep -lw queue_flag_${verb} drivers block/bsg*)
done

Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use blk_queue_flag_set() instead of open-coding this function.

Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use blk_queue_flag_set() instead of open-coding this function.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use the blk_queue_flag_{set,clear}() functions instead of open-coding
these.

Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use the blk_queue_flag_*() functions instead of open-coding these.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Since the queue flags may be changed concurrently from multiple
contexts after a queue becomes visible in sysfs, make these changes
safe by protecting these with the queue lock.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Introduce functions that modify the queue flags and that protect
these modifications with the request queue lock. Except for moving
one wake_up_all() call from inside to outside a critical section,
this patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Except for changing the atomic queue flag manipulations that are
protected by the queue lock into non-atomic manipulations, this
patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move the definition of queue_flag_clear_unlocked() up and move the
definition of queue_in_flight() down such that all queue flag
manipulation function definitions become contiguous.

This patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Tokens are prefixed by a variable length of bytes. If a bytestring is
not stored in an tiny or short atom, we have to skip more than one byte
in order to have the actual bytes not prefixed by the bytes describing
the actual length of the string.
Acked-by: NJonathan Derrick <jonathan.derrick@intel.com>
Signed-off-by: NJonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

On ARM64, the default page size has been 64K on some distributions, and
we should allow ARM64 people to play null_blk.

This patch fixes the issue by extend page bitmap size for supporting
other non-4KB PAGE_SIZE.

Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Kyungchan Koh <kkc6196@fb.com>,
Cc: weiping zhang <zhangweiping@didichuxing.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Reported-by: NYi Zhang <yi.zhang@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A change to the generic scatterlist code caused a conflict with
the rtsx card reader driver:

In file included from drivers/staging/rts5208/rtsx.h:180,
                 from drivers/staging/rts5208/rtsx.c:28:
drivers/staging/rts5208/rtsx_chip.h:343: error: "SG_END" redefined [-Werror]

This changes one instance of the driver to prefix SG_END and
related constants.

Fixes: 723fbf56 ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings")
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A change to the generic scatterlist code caused a conflict with
the rtsx card reader driver:

In file included from drivers/misc/cardreader/rtsx_pcr.c:32:
include/linux/rtsx_pci.h:40: error: "SG_END" redefined [-Werror]

This changes one instance of the driver to prefix SG_END and
related constants.

Fixes: 723fbf56 ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings")
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Avoid that the following race can occur:

blk_cleanup_queue()               blkcg_print_blkgs()
  spin_lock_irq(lock) (1)           spin_lock_irq(blkg->q->queue_lock) (2,5)
    q->queue_lock = &q->__queue_lock (3)
  spin_unlock_irq(lock) (4)
                                    spin_unlock_irq(blkg->q->queue_lock) (6)

(1) take driver lock;
(2) busy loop for driver lock;
(3) override driver lock with internal lock;
(4) unlock driver lock;
(5) can take driver lock now;
(6) but unlock internal lock.

This change is safe because only the SCSI core and the NVME core keep
a reference on a request queue after having called blk_cleanup_queue().
Neither driver accesses any of the removed data structures between its
blk_cleanup_queue() and blk_put_queue() calls.
Reported-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Initialize the request queue lock earlier such that the following
race can no longer occur:

blk_init_queue_node()             blkcg_print_blkgs()
  blk_alloc_queue_node (1)
    q->queue_lock = &q->__queue_lock (2)
    blkcg_init_queue(q) (3)
                                    spin_lock_irq(blkg->q->queue_lock) (4)
  q->queue_lock = lock (5)
                                    spin_unlock_irq(blkg->q->queue_lock) (6)

(1) allocate an uninitialized queue;
(2) initialize queue_lock to its default internal lock;
(3) initialize blkcg part of request queue, which will create blkg and
    then insert it to blkg_list;
(4) traverse blkg_list and find the created blkg, and then take its
    queue lock, here it is the default *internal lock*;
(5) *race window*, now queue_lock is overridden with *driver specified
    lock*;
(6) now unlock *driver specified lock*, not the locked *internal lock*,
    unlock balance breaks.

The changes in this patch are as follows:
- Move the .queue_lock initialization from blk_init_queue_node() into
  blk_alloc_queue_node().
- Only override the .queue_lock pointer for legacy queues because it
  is not useful for blk-mq queues to override this pointer.
- For all all block drivers that initialize .queue_lock explicitly,
  change the blk_alloc_queue() call in the driver into a
  blk_alloc_queue_node() call and remove the explicit .queue_lock
  initialization. Additionally, initialize the spin lock that will
  be used as queue lock earlier if necessary.
Reported-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch does not change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove the disk, partition and bdi sysfs attributes before cleaning up
the request queue associated with the disk.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove the disk, partition and bdi sysfs attributes before cleaning up
the request queue associated with the disk.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove the disk, partition and bdi sysfs attributes before cleaning up
the request queue associated with the disk.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Similarly to the support we have for testing/faking timeouts for
null_blk, this adds support for triggering a requeue condition.
Considering the issues around restart we've been seeing, this should be
a useful addition to the testing arsenal to ensure that we are handling
requeue conditions correctly.

This works for queue mode 1 (legacy request_fn based path) and 2 (blk-mq
path), as there's no good way to do requeue with a bio based driver.
This is similar to the timeout path. For the blk-mq path, we alternate
between passing back BLK_STS_RESOURCE and manually calling
blk_mq_requeue_request() in the driver. The former will hit the core
requeue path, while the latter exercises the IO scheduler requeue
path.
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

sbitmap_queue_get()/sbitmap_queue_clear() are used for
allocating/freeing a resource, so they should provide acquire/release
barrier semantics, respectively. sbitmap_get() currently contains a full
barrier, which is unnecessary, so use test_and_set_bit_lock() instead of
test_and_set_bit() (these are equivalent on x86_64). sbitmap_clear_bit()
does not imply any barriers, which is incorrect, as accesses of the
resource (e.g., request) could potentially get reordered to after the
clear_bit(). Introduce sbitmap_clear_bit_unlock() and use it for
sbitmap_queue_clear() (this only adds a compiler barrier on x86_64). The
other existing user of sbitmap_clear_bit() (the blk-mq software queue
pending map) is serialized through a spinlock and does not need this.
Reported-by: NTejun Heo <tj@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When we insert a request, we set the software queue pending bit while
holding the software queue lock. However, we clear it outside of the
lock, so it's possible that a concurrent insert could reset the bit
after we clear it but before we empty the request list. Afterwards, the
bit would still be set but the software queue wouldn't have any requests
in it, leading us to do a spurious run in the future. This is mostly a
benign/theoretical issue, but it makes the following change easier to
justify.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When debugging the ZBC code in the mq-deadline scheduler it is very
important to know which zones are locked and which zones are not
locked. Hence this patch that exports the zone locking information
through debugfs.

Cc: Omar Sandoval <osandov@fb.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Tested-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make sure that the queue show and store methods are contiguous and
also that these appear in alphabetical order.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This replaces scatterlist->page_link LSB encodings with SG_CHAIN and
SG_END definitions without any functional change.
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Keith for 4.16-rc.

* 'for-jens' of git://git.infradead.org/nvme:
  nvmet: fix PSDT field check in command format
  nvme-multipath: fix sysfs dangerously created links
  nvme-pci: Fix nvme queue cleanup if IRQ setup fails
  nvmet-loop: use blk_rq_payload_bytes for sgl selection
  nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes
  nvme-fabrics: don't check for non-NULL module in nvmf_register_transport