* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (50 commits)
  ide: remove inclusion of non-existent io_trace.h
  ide-disk: add get_smart_data() helper
  ide: fix ->data_phase in taskfile_load_raw()
  ide: check drive->using_dma in flagged_taskfile()
  ide: check ->dma_setup() return value in flagged_taskfile()
  dtc2278: note on docs
  qd65xx: remove pointless qd_{read,write}_reg() (take 2)
  ide: PCI BMDMA initialization fixes (take 2)
  ide: remove stale comments from ide-taskfile.c
  ide: remove dead code from ide_driveid_update()
  ide: use __ide_end_request() in ide_end_dequeued_request()
  ide: enhance ide_setup_pci_noise()
  cs5530: remove needless ide_lock taking
  ide: take ide_lock for prefetch disable/enable in do_special()
  ht6560b: fix deadlock on error handling
  cmd640: fix deadlock on error handling
  slc90e66: fix deadlock on error handling
  opti621: fix deadlock on error handling
  qd65xx: fix deadlock on error handling
  dtc2278: fix deadlock on error handling
  ...

Signed-off-by: NOlof Johansson <olof@lixom.net>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (29 commits)
  dm crypt: tidy pending
  dm mpath: send uevents
  dm: uevent generate events
  dm: add uevent to core
  dm: export name and uuid
  dm raid1: add mirror_set to struct mirror
  dm log: split suspend
  dm mpath: hp retry if not ready
  dm mpath: add hp handler
  dm mpath: add retry pg init
  dm crypt: tidy labels
  dm crypt: tidy whitespace
  dm crypt: add post processing queue
  dm crypt: use per device singlethread workqueues
  dm mpath: emc fix an error message
  dm: bio_list macro renaming
  dm io:ctl remove vmalloc void cast
  dm: tidy bio_io_error usage
  kcopyd use mutex instead of semaphore
  dm: use kzalloc
  ...

Weird I thought I had written the makefile so this would be handled.  Oh
well this should fix it.

Sorry about that.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-and-tested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add crypt prefix to dec_pending to avoid confusing it in backtraces with
the dm core function of the same name.

No functional change here.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds calls to dm_path_event for a failed path and a reinstated
path.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds support for the dm_path_event dm_send_event functions which
create and send udev events.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds a uevent skeleton to device-mapper.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds a function to obtain a copy of a mapped device's name and uuid.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Store a pointer to the owning mirror_set structure within each mirror
structure for a subsequent patch to use.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

There are now two phases to a suspend in device-mapper -
presuspend and postsuspend.  This patch removes the
single 'suspend' in the logging API and replaces it with
'presuspend' and 'postsuspend' functions to align it
better with core device-mapper.

A subsequent patch will make use of 'presuspend'.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds retries to the hp hardware handler, and utilizes the
MP_RETRY flag of dm-multipath.  For now in the hp handler, if we get a
pg_init completed with a check condition we just assume we can retry the
pg_init command.  We make this assumption because of incomplete data on
specific check condition code of the HP hardware, and because testing
has shown the HP path initialization command to be idempotent.
The number of times we retry is settable via the "pg_init_retries"
multipath map feature.
Signed-off-by: NDave Wysochanski <dwysocha@redhat.com>
Acked-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds the most basic dm-multipath hardware support for the
HP active/passive arrays.
Signed-off-by: NDave Wysochanski <dwysocha@redhat.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch allows a failed path group initialisation command to be retried.

It adds a generic MP_RETRY flag and a "pg_init_retries" feature to
device-mapper multipath which limits the number of retries.

1. A hw handler sends a path initialization command to the storage and
the command completes with an error code indicating the command
should be retried.

2. The hardware handler calls dm_pg_init_complete() with MP_RETRY
set in err_flags to ask the dm multipath core to retry.

3. If the retry limit has not been exceeded, pg_init() is retried.
Otherwise fail_path() is called.

If you are using the userspace multipath-tools or device-mapper-multipath
package, you can set pg_init_retries in the 'device' section of your
/etc/multipath.conf file. For example:

features                "2 pg_init_retries 7"

The number of PG retries attempted is reported in the 'dmsetup status' output.
Signed-off-by: NDave Wysochanski <dwysocha@redhat.com>
Acked-by: NMike Christie <michaelc@cs.wisc.edu>
Acked-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace numbers with names in labels in error paths, to avoid confusion
when new one get added between existing ones.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Clean up, convert some spaces to tabs.

No functional change here.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add post-processing queue (per crypt device) for read operations.

Current implementation uses only one queue for all operations
and this can lead to starvation caused by many requests waiting
for memory allocation. But the needed memory-releasing operation
is queued after these requests (in the same queue).
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Use a separate single-threaded workqueue for each crypt device
instead of one global workqueue.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Correct an error message, reported by Michael Wood <michael@frogfoot.com>.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove BIO_LIST and DEFINE_BIO_LIST macros that gain us nothing
since contents are initialised to NULL.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

In drivers/md/dm-ioctl.c::copy_params() there's a call to vmalloc()
where we currently cast the return value, but that's pretty pointless
given that vmalloc() returns "void *".
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Use bio_io_error() in only two places and tidy the code,
preparing for later patches.

There is no functional change in this patch.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Kcopyd uses a semaphore as mutex.  Use the mutex API instead of the (binary)
semaphore,
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Convert kmalloc() + memset() to kzalloc().
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)
Signed-off-by: Nvignesh babu <vignesh.babu@wipro.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch fixes a bd_mount_sem counter corruption bug in device-mapper.

thaw_bdev() should be called only when freeze_bdev() was called for the
device.
Otherwise, thaw_bdev() will up bd_mount_sem and corrupt the semaphore counter.
struct block_device with the corrupted semaphore may remain in slab cache
and be reused later.

Attached patch will fix it by calling unlock_fs() instead.
unlock_fs() will determine whether it should call thaw_bdev()
by checking the device is frozen or not.

Easy reproducer is:
  #!/bin/sh
  while [ 1 ]; do
     dmsetup --notable create a
     dmsetup --nolockfs suspend a
     dmsetup remove a
  done

It's not easy to see the effect of corrupted semaphore.
So I have tested with putting printk below in bdev_alloc_inode():
        if (atomic_read(&ei->bdev.bd_mount_sem.count) != 1)
                printk(KERN_DEBUG "Incorrect semaphore count = %d (%p)\n",
                        atomic_read(&ei->bdev.bd_mount_sem.count),
                        &ei->bdev);

Without the patch, I saw something like:
 Incorrect semaphore count = 17 (f2ab91c0)

With the patch, the message didn't appear.

The bug was introduced in 2.6.16 with this bug fix:

commit d9dde59b
Date:   Fri Feb 24 13:04:24 2006 -0800

    [PATCH] dm: missing bdput/thaw_bdev at removal

    Need to unfreeze and release bdev otherwise the bdev inode with
    inconsistent state is reused later and cause problem.

and backported to 2.6.15.5.

It occurs only in free_dev(), which is called only when the dm device is
removed.  The buggy code is executed only if md->suspended_bdev is
non-NULL and that can happen only when the device was suspended without
noflush.
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: stable@kernel.org

Fix missing space in dm-delay target status output
if separate read and write delay are configured.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add missing 'dm_put_device' to dm-delay target constructor.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add missing 'dm_io_client_destroy' to alloc_context error path.
Reorganize mirror constructor error path in order to prevent
workqueue leakage.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Insert missing kfree() in crypt_iv_essiv_ctr() error path.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add a missing 'dm_put_device' in an error path in crypt target constructor.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Make size of dm_ioctl struct always 312 bytes on all supported
architectures.

This change retains compatibility with already-compiled code because
it uses an embedded offset to locate the payload that follows the
structure.

On 64-bit architectures there is no change at all; on 32-bit
we are increasing the size of dm-ioctl from 308 to 312 bytes.

Currently with 32-bit userspace / 64-bit kernel on x86_64
some ioctls (including rename, message) are incorrectly rejected
by the comparison against 'param + 1'.  This breaks userspace
lvrename and multipath 'fail_if_no_path' changes, for example.

(BTW Device-mapper uses its own versioning and ignores the ioctl
size bits.  Only the generic ioctl compat code on mixed arches
checks them, and that will continue to accept both sizes for now,
but we intend to list 308 as deprecated and eventually remove it.)
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: Guido Guenther <agx@sigxcpu.org>
Cc: Kevin Corry <kevcorry@us.ibm.com>
Cc: stable@kernel.org

Re-order the initialisation of dm-rdac to avoid registering the hw
handler before the workqueue has been initialised. Closes a race
that would potentially give an oops.
Signed-off-by: NBryn M. Reeves <breeves@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Cc: gadio@netvision.net.il
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Merge get_smart_values() and get_smart_thresholds()
into get_smart_data() helper.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It should be TASKFILE_NO_DATA, not TASKFILE_IN.  Luckily ATM ->data_phase is
unused if ->command_type == IDE_DRIVE_TASK_NO_DATA but this may change in the
future.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

These functions are atomic so locking is pointless (noticed by Sergei).

v2:
We can now just use local_irq_save/restore() in qd_testreg() (noticed by Jeff).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>