- 25 1月, 2017 34 次提交
-
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Since a later patch will remove ib_device.dma_device and since knowing the value of that pointer is not too important, remove dma_device from the debug output. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Moni Shoua <monis@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: VMware PV-Drivers <pv-drivers@vmware.com> Acked-by: NAdit Ranadive <aditr@vmware.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Dave Goodell <dgoodell@cisco.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Latif <faisal.latif@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Ram Amrani <Ram.Amrani@cavium.com> Cc: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Selvin Xavier <selvin.xavier@avagotech.com> Cc: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Faisal Latif <faisal.latif@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Matan Barak <matanb@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Acked-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Due to a previous patch initializing ib_device.dev.parent is sufficient and initializing dma_device is no longer needed. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Faisal Latif <faisal.latif@intel.com> Cc: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: NShiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Lijun Ou <oulijun@huawei.com> Cc: Wei Hu(Xavier) <xavier.huwei@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Hariprasad S <hariprasad@chelsio.com> Acked-by: NSteve Wise <swise@chelsio.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Steve Wise <swise@chelsio.com> Acked-by: NSteve Wise <swise@chelsio.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Prepare for removal of ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Move the ib_device.dev.parent initialization code from ib_device_register_sysfs() to ib_register_device(). Additionally, allow HBA drivers to set ib_device.dev.parent without setting ib_device.dma_device. This is the first step towards removing ib_device.dma_device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
The qib DMA mapping code is no longer built since commit eb636ac0 ("IB/qib: Remove dma.c and use rdmavt version of dma functions"). Hence remove it. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
The hfi1 DMA mapping code has never been built in any upstream kernel. Hence remove it. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Dean Luick <dean.luick@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Change the type of the dma_handle argument from u64 * to dma_addr_t *. This patch does not change any functionality. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: rds-devel@oss.oracle.com Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Remove these functions because these are not used. Additionally, the implementation of these functions is not correct for the hfi1, qib and rxe drivers because dma_device is used instead of dma_ops. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Several RDMA drivers (hfi1, qib and rxe) expect that ib_sge.addr is a virtual address. Provide DMA mapping operations that are suitable for these drivers. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Reduce the kernel size by only building dma_noop_ops for those architectures that actually use it. This was suggested by Christoph Hellwig. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
The next patch in this series will introduce another set of DMA operations that map 1:1 with memory. Clarify that dma-noop maps to physical addresses. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Introduce a new architecture-specific get_arch_dma_ops() function that takes a struct bus_type * argument. Add get_dma_ops() in <linux/dma-mapping.h>. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Now that all set_dma_ops() implementations are identical (ignoring BUG_ON() statements), remove the architecture specific definitions and add a definition in <linux/dma-mapping.h>. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Some but not all architectures provide set_dma_ops(). Move dma_ops from struct dev_archdata into struct device such that it becomes possible on all architectures to configure dma_ops per device. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 13 1月, 2017 6 次提交
-
-
由 Jack Wang 提交于
Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com> Reviewed-by: NMichael Wang <yun.wang@profitbricks.com> Acked-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jack Wang 提交于
When we try to resolve a dest addr, if we don't give src addr, cma core will try to resolve to our source ib device automatically. The current logic only checks if a given port has the same subnet_prefix as our dest, which is not enough if we use default well known subnet_prefix on our active port, as it will be the same as the subnet_prefix on inactive ports and we might match against an inactive port by accident. To resolve this, we should also check if port is active before we resolve it as a suitable src address for a given dest. Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com> Reviewed-by: NMichael Wang <yun.wang@profitbricks.com> Acked-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jack Wang 提交于
Export function for rdma_cm, patch for rdma_cm to follow. Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com> Reviewed-by: NMichael Wang <yun.wang@profitbricks.com> Acked-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jack Wang 提交于
We need a port state cache in ib_core, later we will use in rdma_cm. Signed-off-by: NJack Wang <jinpu.wang@profitbricks.com> Reviewed-by: NMichael Wang <yun.wang@profitbricks.com> Acked-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Feras Daoud 提交于
Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function belong to different work queues, they can run in parallel. In this case if ipoib_cm_tx_reap calls list_del and release the lock, ipoib_cm_tx_start may acquire it and call list_del_init on the already deleted object. Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem. Fixes: 839fcaba ("IPoIB: Connected mode experimental support") Signed-off-by: NFeras Daoud <ferasda@mellanox.com> Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Reviewed-by: NAlex Vesker <valex@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Feras Daoud 提交于
In order to resolve a situation where a few process delete the same list element in sequence and cause panic, list_del is replaced with list_del_init. In this case if the first process that calls list_del releases the lock before acquiring it again, other processes who can acquire the lock will call list_del_init. Fixes: b63b70d8 ("IPoIB: Use a private hash table for path lookup") Signed-off-by: NFeras Daoud <ferasda@mellanox.com> Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Reviewed-by: NAlex Vesker <valex@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-