- 15 5月, 2009 3 次提交
-
-
由 David Brownell 提交于
This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S <chaithrika@ti.com> but not yet merged into the DaVinci tree.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 David Brownell 提交于
This resyncs the DaVinci I2S code with the version in the DaVinci tree. The behavioral change uses updated clock interfaces which recently merged to mainline. Two other changes include adding a comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in order to support more boards than just the DM644x EVM. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 David Brownell 提交于
This is a buildfix for the DaVinci PCM code, resyncing it with the version in the DaVinci tree. The notable change is using current EDMA interfaces, which recently merged to mainline. (The older interfaces never made it into mainline.) NOTE: open issue, the DMA should be to/from SRAM; see chip errata for more info. The artifacts are extremely easy to hear on DM355 hardware (not yet supported in mainline), but don't seem as audible on DM6446 hardwaare (which does have mainline support). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 3月, 2009 2 次提交
-
-
由 Hugo Villeneuve 提交于
Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Hugo Villeneuve 提交于
Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 3月, 2009 1 次提交
-
-
由 Hugo Villeneuve 提交于
Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 3月, 2009 1 次提交
-
-
由 Eric Miao 提交于
Considering the fact that most cpu_dai or codec_dai are using a same 'snd_soc_dai_ops' for several similar interfaces, 'ops' would be better made a pointer instead, to make sharing easier and code a bit cleaner. The patch below is rather preliminary since the asoc tree is being actively developed, and this touches almost every piece of code, (and possibly many others in development need to be changed as well). Building of all codecs are OK, yet to every SoC, I didn't test that. Signed-off-by: NEric Miao <eric.miao@marvell.com> Acked-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 14 2月, 2009 1 次提交
-
-
由 Kevin Hilman 提交于
Fix for the error when the audio module is unloaded. On unregistering the platform_device, platform_device_release will free the platform data.If platform data is static the kernel panics when it is freed. Instead use the platform device helper function to add data. This change has been tested on DM644x EVM, DM644x SFFSDR and DM355 EVM. Signed-off-by: NChaithrika U S <chaithrika@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 1月, 2009 1 次提交
-
-
由 Mark Brown 提交于
The PCM operations tables are not exported directly but are instead included in the platform structure so should be declared static. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 1月, 2009 1 次提交
-
-
由 Hugo Villeneuve 提交于
Remove dependency on sffsdr_fpga_set_codec_fs() when the SFFSDR FPGA module is not selected. Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 1月, 2009 1 次提交
-
-
由 Fernando Carrijo 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: NTheodore Ts'o <tytso@mit.edu> Acked-by: NMark Fasheh <mfasheh@suse.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Acked-by: NCasey Schaufler <casey@schaufler-ca.com> Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 1月, 2009 1 次提交
-
-
由 David Brownell 提交于
Let's have audio playback not sound like chipmunks, 'k? :) ASP1 on the DM355 EVM uses a 27 MHz external audio clock, not the slower clock used with ASP0 on the DM6446 EVM. Also, that slower ASP0 clock on the DM6446 is 12.288 MHz, not 22.5792 MHz ... 48 KHz sample rate (x256), not a double speed 44.1 KHz sample rate (which could be done, but isn't what the board init code now sets up). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 1月, 2009 1 次提交
-
-
由 David Brownell 提交于
Minor bugfix: now that DaVinci kernels can support multiple boards, board-specific ASoC components need to verify they're running on the right board before initializing. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 12月, 2008 7 次提交
-
-
由 Troy Kisky 提交于
Sense DaVinci does not support true I2S mode and we don't have to use the hack, use dsp_b mode instead Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Troy Kisky 提交于
Fix the meaning of SND_SOC_DAIFMT_NB_NF to match that used in the codec. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Troy Kisky 提交于
DaVinci does not support true I2S or right justified mode so not all I2S codecs will work with it when the codec is master. Document this limitation. Add dsp_a, dsp_b mode options Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Troy Kisky 提交于
Minor, just move a block of code to make next patch clearer. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Troy Kisky 提交于
Just at little cleanup of davinci_i2s_set_dai_fmt Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Troy Kisky 提交于
Document the current polarity choices. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Troy Kisky 提交于
Add constants with a value of 0 to show more explicitly what is being requested. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 14 12月, 2008 1 次提交
-
-
由 Alexander Beregalov 提交于
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 12月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The module init entries should be __init instead of __devinit. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 12月, 2008 2 次提交
-
-
由 Mark Brown 提交于
This is done at modprobe time, mirroring current behaviour, except for mpc5200_psc_i2s where we do registration at the same time as we register with soc-of-simple. Since the core currently ignores registration this has no practical impact. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Register all platform DAIs with the core. In line with current behaviour this is done at module probe time rather than when the devices are probed (since currently that only happens as the entire ASoC card is registered except for those drivers that currently implement some kind of hotplug). Since the core currently ignores DAI registration this has no practical effect. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 12月, 2008 1 次提交
-
-
由 Mark Brown 提交于
As part of the deprecation of snd_soc_device push the registration of the platform down into the card structure. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 11月, 2008 1 次提交
-
-
由 Mark Brown 提交于
DAI type information is only ever used within ASoC in order to special case AC97 and for diagnostic purposes. Since modern CPUs and codecs support multi function DAIs which can be configured for several modes it is more trouble than it's worth to maintain anything other than a flag identifying AC97 DAIs so remove the type field and replace it with an ac97_control flag. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 21 11月, 2008 2 次提交
-
-
由 Mark Brown 提交于
Liam Girdwood's ASoC v2 work avoids having two different ops structures for DAIs by merging the members of struct snd_soc_ops into struct snd_soc_dai_ops, allowing per DAI configuration for everything. Backport this change. This paves the way for future work allowing any combination of DAIs to be connected rather than having fixed purpose CODEC and CPU DAIs and only allowing CODEC<->CPU interconnections. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
One of the issues with the ASoC v1 API which has been addressed in the ASoC v2 work that Liam Girdwood has done is that the ALSA card provided by ASoC is distributed around the ASoC structures. For example, machine wide data such as the struct snd_card are maintained as part of the CODEC data structure, preventing the use of multiple codecs. This has been addressed by refactoring the data structures so that all the data for the ALSA card is contained in a single structure snd_soc_card which replaces the existing snd_soc_machine and snd_soc_device. Begin the process of backporting this by renaming struct snd_soc_machine to struct snd_soc_card, better reflecting its function and bringing it closer to standard ALSA terminology. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 11月, 2008 1 次提交
-
-
由 Hugo Villeneuve 提交于
The PCM3008 is used on the Lyrtech SFFSDR board, in conjunction with an FPGA that generates the bit clock and the master clock [Downgraded the rate debug print to pr_debug() in hw_params, converted asm/gpio.h to linux/gpio.h -- broonie] Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 11月, 2008 1 次提交
-
-
由 Naresh Medisetty 提交于
Fix concurrent capture/playback issue. The issue is caused by re-initialization of control registers used specifically for capture or playback in both capture and playback operations. Signed-off-by: NSteve Chen <schen@mvista.com> Signed-off-by: NNaresh Medisetty <naresh@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 11月, 2008 1 次提交
-
-
由 Naresh Medisetty 提交于
Fixes swapping of channels at start of stereo playback. Channel swap can be observed while playing left-only or right-only audio data. The channel swap is fixed by handling the XSYNCERR condition. Signed-off-by: NNaresh Medisetty <naresh@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 11月, 2008 1 次提交
-
-
由 Hugo Villeneuve 提交于
The TI DVEVM board uses the SND_SOC_DAIFMT_CBM_CFM & I2S formats, but the Lyrtech SFFSDR board uses the SND_SOC_DAIFMT_CBM_CFS & RIGHT-JUSTIFIED formats. Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 10月, 2008 1 次提交
-
-
由 Vladimir Barinov 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 23 9月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
Convert the tlv320aic3x codec driver to the new (standard) device driver binding model. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Vladimir Barinov <vbarinov@ru.mvista.com> Tested-by: NJarkko Nikula <jarkko.nikula@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 29 8月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
Two warning messages lack their trailing new-line, add it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 7月, 2008 3 次提交
-
-
由 Liam Girdwood 提交于
This patch adds several functions for DAI control and config and replaces the current method of calling function pointers within the DAI struct within the machine drivers. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Liam Girdwood 提交于
This patch merges struct snd_soc_codec_dai and struct snd_soc_cpu_dai into struct snd_soc_dai for the DaVinci platform. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Liam Girdwood 提交于
Refactored snd_soc_dapm_set_endpoint() to snd_soc_dapm_enable_pin() and snd_soc_dapm_disable_pin(). Renamed snd_soc_dapm_sync_endpoints() to snd_soc_dapm_sync(). Renamed snd_soc_dapm_get_endpoint_status() to snd_soc_dapm_get_pin_status(). Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-