Moving liquidio_legacy_intr_handler to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NRaghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_msix_intr_handler to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NRaghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MAC stats command takes a port ID, which doesn't exist on
pre-ef10 NICs (5000- and 6000- series). This is extracted from the
NIC specific data; we misinterpret this as the ef10 data structure,
causing us to read potentially unallocated data. With a KASAN kernel
this can cause errors with:
   BUG: KASAN: slab-out-of-bounds in efx_mcdi_mac_stats

Fixes: 0a2ab4d9 ("sfc: set the port-id when calling MC_CMD_MAC_STATS")
Reported-by: NStefano Brivio <sbrivio@redhat.com>
Tested-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I made an embarrassing mistake and used 'IPV6' instead of 'CONFIG_IPV6'
around the function that updates the kernel about IPv6 neighbours
activity. This can be a problem if the kernel has more neighbours than a
certain threshold and it starts deleting those that are supposedly
inactive.

Fixes: b5f3e0d4 ("mlxsw: spectrum_router: Fix build when IPv6 isn't enabled")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 routes currently lack nexthop flags as in IPv4. This has several
implications.

In the forwarding path, it requires us to check the carrier state of the
nexthop device and potentially ignore a linkdown route, instead of
checking for RTNH_F_LINKDOWN.

It also requires capable drivers to use the user facing IPv6-specific
route flags to provide offload indication, instead of using the nexthop
flags as in IPv4.

Add nexthop flags to IPv6 routes in the 40 bytes hole and use it to
provide offload indication instead of the RTF_OFFLOAD flag, which is
removed while it's still not part of any official kernel release.

In the near future we would like to use the field for the
RTNH_F_{LINKDOWN,DEAD} flags, but this change is more involved and might
not be ready in time for the current cycle.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not necessary to manually clear the
device driver data to NULL.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not necessary to manually clear the
device driver data to NULL.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fw_type module parameter isn't showing up in the
/sys/module/liquidio/parameters directory.  Fix it by setting the read
permission bits for user, group, other in module_param_string().  Revise
the description of fw_type.  Initialize the fw_type static char array with
the default value to conform to the module parameter description.
Signed-off-by: NDerek Chickles <derek.chickles@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to limited ASIC resources the maximum number of routes is limited by
the nexthop resource. In order to improve the routing scale nexthop
consolidation should be performed.

This patch adds support for IPv6 neighbor consolidation. The hash value
is calculated based on the nexthop set, by performing bitwise xor on the
ifindexs of the nexthops, in a similar way to IPv4's kernel implementation.
In case of collision a full match is performed between the sets which
include address and ifindex comparison.

Non gateway nexthop groups are not inserted to the hash table due to
lack of nexthop device (ifindex).
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch does preparation before introducing IPv6 nexthop group
consolidation. Currently the nexthop group hash table is used only by
IPv4 and uses fixed key size. In order to support the IPv6's variable
length key the current table is changed.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

added support for ethtool --set-ring feature
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_setup_io_queues to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_napi_poll to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_napi_drv_callback to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_push_packet to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common octeon_setup_droq to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common update_txq_status to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common function wait_for_pending_requests to octeon_network.h
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cxgb4vf Ethernet driver now queries PCIe configuration space to
determine if it can send TLPs to it with the Relaxed Ordering
Attribute set, just like the pf did.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Reviewed-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cxgb4 Ethernet driver now queries PCIe configuration space to determine
if it can send TLPs to it with the Relaxed Ordering Attribute set.

Remove the enable_pcie_relaxed_ordering() to avoid enable PCIe Capability
Device Control[Relaxed Ordering Enable] at probe routine, to make sure
the driver will not send the Relaxed Ordering TLPs to the Root Complex which
could not deal the Relaxed Ordering TLPs.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Reviewed-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch apply Mellanox network vendor which includes:
- Mellanox card devices: ConnectX-4, ConnectX-5 and Connect-IB cards.
- Mellanox switch device: SwitchX-2 Switch-IB, Spectrum.
Therefore rephrasing help.
Signed-off-by: NOhad Oz <ohado@mellanox.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mellanox switches (mlxsw) supports I2C systems without PCI, in order to
give the ability to the users to use such functionality, there is need
to update Kconfig.
Signed-off-by: NOhad Oz <ohado@mellanox.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The number of LPM trees available for lookup is much smaller than the
number of virtual routers, which are used to implement VRFs. In
addition, an LPM tree can only be used by one protocol - either IPv4 or
IPv6.

Therefore, in order to increase the number of supported virtual routers
to the maximum we need to be able to share LPM trees across virtual
routers instead of trying to find an optimized tree for each.

Do that by allocating one LPM tree for each protocol, but make sure it
will only include prefixes that are actually used, so as to not perform
unnecessary lookups.

Since changing the structure of a bound tree isn't recommended, whenever
a new tree it required, it's first created and then bound to each
virtual router, replacing the old one.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of relying on the LPM tree to be assigned to the virtual router
before binding the two, lets pass it explicitly.

This will later allow us to return upon binding error instead of having
to perform a rollback of the assignment.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no point in returning a value from function whose return value
is never checked.

Even if the return value was checked, there wouldn't be anything to do
about it, as these functions are either called from error or deletion
paths.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- remove logging dependency upon global func octeon_console_debug_enabled()
- abstract debug console logging using console structure (via function ptr)
  to allow for more flexible logging
Signed-off-by: NRick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: NRaghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ptp_enable was a global static variable.  Moved this global variable to
octeon_device structure and removed extra device id check.
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make these structures const as they only stored in the profile field of
a mlxsw_driver structure, which is of type const.
Done using Coccinelle.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The firmware expects a MAC_REPR control message when a MAC representor
is created. The driver should expect a PORTMOD message to follow which
will provide the link states of the physical port associated with the MAC
representor.
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Flower app may receive a request to update the MTU of a representor
netdev upon receipt of a control message from the firmware. This requires
the RTNL lock which needs to be taken outside of the packet processing
path.

As a handling of this correctly seems a little to invasive for a fix simply
skip setting the MTU for now.

Relevant backtrace:
 [ 1496.288489] BUG: scheduling while atomic: kworker/0:3/373/0x00000100
 [ 1496.294911]  dca syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm mxm_wmi ahci pps_core libahci i2c_algo_bit wmi [last unloaded: nfp]
 [ 1496.294918] CPU: 0 PID: 373 Comm: kworker/0:3 Tainted: G           OE   4.13.0-rc3+ #3
 [ 1496.294919] Hardware name: Supermicro X10DRi/X10DRi, BIOS 2.0 12/28/2015
 [ 1496.294923] Workqueue: events work_for_cpu_fn
 [ 1496.294924] Call Trace:
 [ 1496.294927]  <IRQ>
 [ 1496.294931]  dump_stack+0x63/0x82
 [ 1496.294935]  __schedule_bug+0x54/0x70
 [ 1496.294937]  __schedule+0x62f/0x890
 [ 1496.294941]  ? intel_unmap_sg+0x90/0x90
 [ 1496.294942]  schedule+0x36/0x80
 [ 1496.294943]  schedule_preempt_disabled+0xe/0x10
 [ 1496.294945]  __mutex_lock.isra.2+0x445/0x4a0
 [ 1496.294947]  ? device_is_rmrr_locked+0x12/0x50
 [ 1496.294950]  ? kfree+0x162/0x170
 [ 1496.294952]  ? device_is_rmrr_locked+0x12/0x50
 [ 1496.294953]  ? iommu_should_identity_map+0x50/0xe0
 [ 1496.294954]  __mutex_lock_slowpath+0x13/0x20
 [ 1496.294955]  ? iommu_no_mapping+0x48/0xd0
 [ 1496.294956]  ? __mutex_lock_slowpath+0x13/0x20
 [ 1496.294957]  mutex_lock+0x2f/0x40
 [ 1496.294960]  rtnl_lock+0x15/0x20
 [ 1496.294979]  nfp_flower_cmsg_rx+0xc8/0x150 [nfp]
 [ 1496.294986]  nfp_ctrl_poll+0x286/0x350 [nfp]
 [ 1496.294989]  tasklet_action+0xf6/0x110
 [ 1496.294992]  __do_softirq+0xed/0x278
 [ 1496.294993]  irq_exit+0xb6/0xc0
 [ 1496.294994]  do_IRQ+0x4f/0xd0
 [ 1496.294996]  common_interrupt+0x89/0x89

Fixes: 948faa46 ("nfp: add support for control messages for flower app")
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the function stmmac_mdio_register() is only used by
stmmac_dvr_probe() from stmmac_main.c, in order to register the MDIO bus
and probe information about the PHY. As this function is called before
calling register_netdev(), all messages logged from stmmac_mdio_register
are prefixed by "(unnamed net_device)". The goal of netdev_info or
netdev_err is to dump useful infos about a net_device, when this data
structure is partially initialized, there is no point for using these
functions.

This commit fixes the issue by replacing all netdev_*() by the
corresponding dev_*() function for logging. The last netdev_info is
replaced by phy_attached_info(), as a valid phydev can be used at this
point.
Signed-off-by: NRomain Perier <romain.perier@collabora.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implemented workarounds for the following dTSEC Erratum:
A002, A004, A0012, A0014, A004839 on several operations
that involve MAC CFG register changes: adjust link,
rx pause frames, modify MAC address.
Signed-off-by: NFlorinel Iordache <florinel.iordache@nxp.com>
Acked-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These were copy and paste bugs, but I believe they are harmless.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function has a copy and paste bug so it accidentally calls the add
function instead of the delete function.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two mac controllers in the rk3328, the one connects
to external PHY, and the other one connects to integrated PHY.
Like the mac of external PHY, the integrated PHY's mac also
needs to configure the related mac registers at GRF.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>