This reverts commit a7be94ac.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The runstate of vcpu should be restored for all possible cpus, as well as the
vcpu info placement.
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

After merging the xen-two tree, today's linux-next build (x86_64
allmodconfig) produced this warning:

arch/x86/xen/enlighten.c: In function 'init_hvm_pv_info':
arch/x86/xen/enlighten.c:1617:16: warning: unused variable 'ebx' [-Wunused-variable]
arch/x86/xen/enlighten.c:1617:11: warning: unused variable 'eax' [-Wunused-variable]

Introduced by commit 9d02b43d ("xen PVonHVM: use E820_Reserved area
for shared_info").
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

As on ia64 builds we get:
include/xen/interface/version.h: In function 'xen_running_on_version_or_later':
include/xen/interface/version.h:76: error: implicit declaration of function 'HYPERVISOR_xen_version'

We can later on make this function exportable if there are
modules using part of it. For right now the only two users are
built-in.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

With Xen acpi pad logic added into kernel, we can now revert xen mwait related
patch df88b2d9 ("xen/enlighten: Disable
MWAIT_LEAF so that acpi-pad won't be loaded. "). The reason is, when running under
newer Xen platform, Xen pad driver would be early loaded, so native pad driver
would fail to be loaded, and hence no mwait/monitor #UD risk again.

Another point is, only Xen4.2 or later support Xen acpi pad, so we won't expose
mwait cpuid capability when running under older Xen platform.
Signed-off-by: NLiu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This is a respin of 00e37bdb
("xen PVonHVM: move shared_info to MMIO before kexec").

Currently kexec in a PVonHVM guest fails with a triple fault because the
new kernel overwrites the shared info page. The exact failure depends on
the size of the kernel image. This patch moves the pfn from RAM into an
E820 reserved memory area.

The pfn containing the shared_info is located somewhere in RAM. This will
cause trouble if the current kernel is doing a kexec boot into a new
kernel. The new kernel (and its startup code) can not know where the pfn
is, so it can not reserve the page. The hypervisor will continue to update
the pfn, and as a result memory corruption occours in the new kernel.

The toolstack marks the memory area FC000000-FFFFFFFF as reserved in the
E820 map. Within that range newer toolstacks (4.3+) will keep 1MB
starting from FE700000 as reserved for guest use. Older Xen4 toolstacks
will usually not allocate areas up to FE700000, so FE700000 is expected
to work also with older toolstacks.

In Xen3 there is no reserved area at a fixed location. If the guest is
started on such old hosts the shared_info page will be placed in RAM. As
a result kexec can not be used.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Remove duplicated include.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

CC: stable@vger.kernel.org
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We actually do not do anything about it. Just return a default
value of zero and if the kernel tries to write anything but 0
we BUG_ON.

This fixes the case when an user tries to suspend the machine
and it blows up in save_processor_state b/c 'read_cr8' is set
to NULL and we get:

kernel BUG at /home/konrad/ssd/linux/arch/x86/include/asm/paravirt.h:100!
invalid opcode: 0000 [#1] SMP
Pid: 2687, comm: init.late Tainted: G           O 3.6.0upstream-00002-gac264ac-dirty #4 Bochs Bochs
RIP: e030:[<ffffffff814d5f42>]  [<ffffffff814d5f42>] save_processor_state+0x212/0x270

.. snip..
Call Trace:
 [<ffffffff810733bf>] do_suspend_lowlevel+0xf/0xac
 [<ffffffff8107330c>] ? x86_acpi_suspend_lowlevel+0x10c/0x150
 [<ffffffff81342ee2>] acpi_suspend_enter+0x57/0xd5

CC: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The hypervisor will trap it. However without this patch,
we would crash as the .read_tscp is set to NULL. This patch
fixes it and sets it to the native_read_tscp call.

CC: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The xen c/s 25873 allows the hypervisor to retrieve the NUMLOCK flag.
With this patch, the Linux kernel can get the state according to the
data in the BIOS.
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

As the initial domain we are able to search/map certain regions
of memory to harvest configuration data. For all low-level we
use ACPI tables - for interrupts we use exclusively ACPI _PRT
(so DSDT) and MADT for INT_SRC_OVR.

The SMP MP table is not used at all. As a matter of fact we do
not even support machines that only have SMP MP but no ACPI tables.

Lets follow how Moorestown does it and just disable searching
for BIOS SMP tables.

This also fixes an issue on HP Proliant BL680c G5 and DL380 G6:

9f->100 for 1:1 PTE
Freeing 9f-100 pfn range: 97 pages freed
1-1 mapping on 9f->100
.. snip..
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009efff] usable
Xen: [mem 0x000000000009f400-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x00000000cfd1dfff] usable
.. snip..
Scan for SMP in [mem 0x00000000-0x000003ff]
Scan for SMP in [mem 0x0009fc00-0x0009ffff]
Scan for SMP in [mem 0x000f0000-0x000fffff]
found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0]
(XEN) mm.c:908:d0 Error getting mfn 100 (pfn 5555555555555555) from L1 entry 0000000000100461 for l1e_owner=0, pg_owner=0
(XEN) mm.c:4995:d0 ptwr_emulate: could not get_page_from_l1e()
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff81ac07e2>] xen_set_pte_init+0x66/0x71
. snip..
Pid: 0, comm: swapper Not tainted 3.6.0-rc6upstream-00188-gb6fb969-dirty #2 HP ProLiant BL680c G5
.. snip..
Call Trace:
 [<ffffffff81ad31c6>] __early_ioremap+0x18a/0x248
 [<ffffffff81624731>] ? printk+0x48/0x4a
 [<ffffffff81ad32ac>] early_ioremap+0x13/0x15
 [<ffffffff81acc140>] get_mpc_size+0x2f/0x67
 [<ffffffff81acc284>] smp_scan_config+0x10c/0x136
 [<ffffffff81acc2e4>] default_find_smp_config+0x36/0x5a
 [<ffffffff81ac3085>] setup_arch+0x5b3/0xb5b
 [<ffffffff81624731>] ? printk+0x48/0x4a
 [<ffffffff81abca7f>] start_kernel+0x90/0x390
 [<ffffffff81abc356>] x86_64_start_reservations+0x131/0x136
 [<ffffffff81abfa83>] xen_start_kernel+0x65f/0x661
(XEN) Domain 0 crashed: 'noreboot' set - not rebooting.

which is that ioremap would end up mapping 0xff using _PAGE_IOMAP
(which is what early_ioremap sticks as a flag) - which meant
we would get MFN 0xFF (pte ff461, which is OK), and then it would
also map 0x100 (b/c ioremap tries to get page aligned request, and
it was trying to map 0xf4fa0 + PAGE_SIZE - so it mapped the next page)
as _PAGE_IOMAP. Since 0x100 is actually a RAM page, and the _PAGE_IOMAP
bypasses the P2M lookup we would happily set the PTE to 1000461.
Xen would deny the request since we do not have access to the
Machine Frame Number (MFN) of 0x100. The P2M[0x100] is for example
0x80140.

CC: stable@vger.kernel.org
Fixes-Oracle-Bugzilla: https://bugzilla.oracle.com/bugzilla/show_bug.cgi?id=13665Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We don't need to return the new PGD - as we do not use it.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Revert "xen/x86: Workaround 64-bit hypervisor and 32-bit initial domain." and "xen/x86: Use memblock_reserve for sensitive areas."

This reverts commit 806c312e and
commit 59b29440.

And also documents setup.c and why we want to do it that way, which
is that we tried to make the the memblock_reserve more selective so
that it would be clear what region is reserved. Sadly we ran
in the problem wherein on a 64-bit hypervisor with a 32-bit
initial domain, the pt_base has the cr3 value which is not
neccessarily where the pagetable starts! As Jan put it: "
Actually, the adjustment turns out to be correct: The page
tables for a 32-on-64 dom0 get allocated in the order "first L1",
"first L2", "first L3", so the offset to the page table base is
indeed 2. When reading xen/include/public/xen.h's comment
very strictly, this is not a violation (since there nothing is said
that the first thing in the page table space is pointed to by
pt_base; I admit that this seems to be implied though, namely
do I think that it is implied that the page table space is the
range [pt_base, pt_base + nt_pt_frames), whereas that
range here indeed is [pt_base - 2, pt_base - 2 + nt_pt_frames),
which - without a priori knowledge - the kernel would have
difficulty to figure out)." - so lets just fall back to the
easy way and reserve the whole region.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There is no need for those functions/variables to be visible. Make them
static and also fix the compile warnings of this sort:

drivers/xen/<some file>.c: warning: symbol '<blah>' was not declared. Should it be static?

Some of them just require including the header file that
declares the functions.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If a 64-bit hypervisor is booted with a 32-bit initial domain,
the hypervisor deals with the initial domain as "compat" and
does some extra adjustments (like pagetables are 4 bytes instead
of 8). It also adjusts the xen_start_info->pt_base incorrectly.

When booted with a 32-bit hypervisor (32-bit initial domain):
..
(XEN)  Start info:    cf831000->cf83147c
(XEN)  Page tables:   cf832000->cf8b5000
..
[    0.000000] PT: cf832000 (f832000)
[    0.000000] Reserving PT: f832000->f8b5000

And with a 64-bit hypervisor:
(XEN)  Start info:    00000000cf831000->00000000cf8314b4
(XEN)  Page tables:   00000000cf832000->00000000cf8b6000

[    0.000000] PT: cf834000 (f834000)
[    0.000000] Reserving PT: f834000->f8b8000

To deal with this, we keep keep track of the highest physical
address we have reserved via memblock_reserve. If that address
does not overlap with pt_base, we have a gap which we reserve.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

instead of a big memblock_reserve. This way we can be more
selective in freeing regions (and it also makes it easier
to understand where is what).

[v1: Move the auto_translate_physmap to proper line]
[v2: Per Stefano suggestion add more comments]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This reverts commit 00e37bdb.

During shutdown of PVHVM guests with more than 2VCPUs on certain
machines we can hit the race where the replaced shared_info is not
replaced fast enough and the PV time clock retries reading the same
area over and over without any any success and is stuck in an
infinite loop.
Acked-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Compile events.c on ARM.
Parse, map and enable the IRQ to get event notifications from the device
tree (node "/xen").
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Currently kexec in a PVonHVM guest fails with a triple fault because the
new kernel overwrites the shared info page. The exact failure depends on
the size of the kernel image. This patch moves the pfn from RAM into
MMIO space before the kexec boot.

The pfn containing the shared_info is located somewhere in RAM. This
will cause trouble if the current kernel is doing a kexec boot into a
new kernel. The new kernel (and its startup code) can not know where the
pfn is, so it can not reserve the page. The hypervisor will continue to
update the pfn, and as a result memory corruption occours in the new
kernel.

One way to work around this issue is to allocate a page in the
xen-platform pci device's BAR memory range. But pci init is done very
late and the shared_info page is already in use very early to read the
pvclock. So moving the pfn from RAM to MMIO is racy because some code
paths on other vcpus could access the pfn during the small   window when
the old pfn is moved to the new pfn. There is even a  small window were
the old pfn is not backed by a mfn, and during that time all reads
return -1.

Because it is not known upfront where the MMIO region is located it can
not be used right from the start in xen_hvm_init_shared_info.

To minimise trouble the move of the pfn is done shortly before kexec.
This does not eliminate the race because all vcpus are still online when
the syscore_ops will be called. But hopefully there is no work pending
at this point in time. Also the syscore_op is run last which reduces the
risk further.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

init_hvm_pv_info is called only in PVonHVM context, move it into ifdef.
init_hvm_pv_info does not fail, make it a void function.
remove arguments from init_hvm_pv_info because they are not used by the
caller.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Both have type struct shared_info so no cast is needed.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When switching tasks in a Xen PV guest, avoid updating the TLS
descriptors if they haven't changed.  This improves the speed of
context switches by almost 10% as much of the time the descriptors are
the same or only one is different.

The descriptors written into the GDT by Xen are modified from the
values passed in the update_descriptor hypercall so we keep shadow
copies of the three TLS descriptors to compare against.

lmbench3 test     Before  After  Improvement
--------------------------------------------
lat_ctx -s 32 24   7.19    6.52  9%
lat_pipe          12.56   11.66  7%
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
[v1: Moving it to the Xen file]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When Xen hypervisor inject vMCE to guest, use native mce handler
to handle it
Signed-off-by: NKe, Liping <liping.ke@intel.com>
Signed-off-by: NJiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NLiu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When MCA error occurs, it would be handled by Xen hypervisor first,
and then the error information would be sent to initial domain for logging.

This patch gets error information from Xen hypervisor and convert
Xen format error into Linux format mcelog. This logic is basically
self-contained, not touching other kernel components.

By using tools like mcelog tool users could read specific error information,
like what they did under native Linux.

To test follow directions outlined in Documentation/acpi/apei/einj.txt
Acked-and-tested-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NKe, Liping <liping.ke@intel.com>
Signed-off-by: NJiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NLiu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There were paravirt_ops hooks for the full register set variant of
{rd,wr}msr_safe which are actually not used by anyone anymore. Remove
them to make the code cleaner and avoid silent breakages when the pvops
members were uninitialized. This has been boot-tested natively and under
Xen with PVOPS enabled and disabled on one machine.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Link: http://lkml.kernel.org/r/1338562358-28182-2-git-send-email-bp@amd64.orgAcked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Xen PV kernels allow access to the APERF/MPERF registers to read the
effective frequency. Access to the MSRs is however redirected to the
currently scheduled physical CPU, making consecutive read and
compares unreliable. In addition each rdmsr traps into the hypervisor.
So to avoid bogus readouts and expensive traps, disable the kernel
internal feature flag for APERF/MPERF if running under Xen.
This will
a) remove the aperfmperf flag from /proc/cpuinfo
b) not mislead the power scheduler (arch/x86/kernel/cpu/sched.c) to
   use the feature to improve scheduling (by default disabled)
c) not mislead the cpufreq driver to use the MSRs

This does not cover userland programs which access the MSRs via the
device file interface, but this will be addressed separately.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Cc: stable@vger.kernel.org # v3.0+
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Stub out MSR methods that aren't actually needed.  This fixes a crash
as Xen Dom0 on AMD Trinity systems.  A bigger patch should be added to
remove the paravirt machinery completely for the methods which
apparently have no users!
Reported-by: NAndre Przywara <andre.przywara@amd.com>
Link: http://lkml.kernel.org/r/20120530222356.GA28417@andromeda.dapyr.netSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>

Provide the registration callback to call in the Xen's
ACPI sleep functionality. This means that during S3/S5
we make a hypercall XENPF_enter_acpi_sleep with the
proper PM1A/PM1B registers.

Based of Ke Yu's <ke.yu@intel.com> initial idea.
[ From http://xenbits.xensource.com/linux-2.6.18-xen.hg
change c68699484a65 ]

[v1: Added Copyright and license]
[v2: Added check if PM1A/B the 16-bits MSB contain something. The spec
     only uses 16-bits but might have more in future]
Signed-off-by: NLiang Tang <liang.tang@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Map native ipi vector to xen vector.
Implement apic ipi interface with xen_send_IPI_one.
Tested-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NBen Guthro <ben@guthro.net>
Signed-off-by: NLin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In xen_memory_setup(), if a page that is being released has a VA
mapping this must also be updated.  Otherwise, the page will be not
released completely -- it will still be referenced in Xen and won't be
freed util the mapping is removed and this prevents it from being
reallocated at a different PFN.

This was already being done for the ISA memory region in
xen_ident_map_ISA() but on many systems this was omitting a few pages
as many systems marked a few pages below the ISA memory region as
reserved in the e820 map.

This fixes errors such as:

(XEN) page_alloc.c:1148:d0 Over-allocation for domain 0: 2097153 > 2097152
(XEN) memory.c:133:d0 Could not allocate order=0 extent: id=0 memflags=0 (0 of 17)
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The accessing PCI configuration space with the PCI BIOS32 service does
not work in PV guests.

On systems without MMCONFIG or where the BIOS hasn't marked the
MMCONFIG region as reserved in the e820 map, the BIOS service is
probed (even though direct access is preferred) and this hangs.

CC: stable@kernel.org
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
[v1: Fixed compile error when CONFIG_PCI is not set]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

On x86_64 on AMD machines where the first APIC_ID is not zero, we get:

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
BIOS bug: APIC version is 0 for CPU 1/0x10, fixing up to 0x10
BIOS bug: APIC version mismatch, boot CPU: 0, CPU 1: version 10

which means that when the ACPI processor driver loads and
tries to parse the _Pxx states it fails to do as, as it
ends up calling acpi_get_cpuid which does this:

for_each_possible_cpu(i) {
        if (cpu_physical_id(i) == apic_id)
                return i;
}

And the bootup CPU, has not been found so it fails and returns -1
for the first CPU - which then subsequently in the loop that
"acpi_processor_get_info" does results in returning an error, which
means that "acpi_processor_add" failing and per_cpu(processor)
is never set (and is NULL).

That means that when xen-acpi-processor tries to load (much much
later on) and parse the P-states it gets -ENODEV from
acpi_processor_register_performance() (which tries to read
the per_cpu(processor)) and fails to parse the data.
Reported-by-and-Tested-by: NStefan Bader <stefan.bader@canonical.com>
Suggested-by: NBoris Ostrovsky <boris.ostrovsky@amd.com>
[v2: Bit-shift APIC ID by 24 bits]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Or rather just implement one different function as opposed
to the native one : the read function.

We synthesize the values.
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
[v1: Rebased on top of tip/x86/urgent]
[v2: Return 0xfd instead of 0xff in the default case]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There are exactly four users of __monitor and __mwait:

 - cstate.c (which allows acpi_processor_ffh_cstate_enter to be called
   when the cpuidle API drivers are used. However patch
   "cpuidle: replace xen access to x86 pm_idle and default_idle"
   provides a mechanism to disable the cpuidle and use safe_halt.
 - smpboot (which allows mwait_play_dead to be called). However
   safe_halt is always used so we skip that.
 - intel_idle (same deal as above).
 - acpi_pad.c. This the one that we do not want to run as we
   will hit the below crash.

Why do we want to expose MWAIT_LEAF in the first place?
We want it for the xen-acpi-processor driver - which uploads
C-states to the hypervisor. If MWAIT_LEAF is set, the cstate.c
sets the proper address in the C-states so that the hypervisor
can benefit from using the MWAIT functionality. And that is
the sole reason for using it.

Without this patch, if a module performs mwait or monitor we
get this:

invalid opcode: 0000 [#1] SMP
CPU 2
.. snip..
Pid: 5036, comm: insmod Tainted: G           O 3.4.0-rc2upstream-dirty #2 Intel Corporation S2600CP/S2600CP
RIP: e030:[<ffffffffa000a017>]  [<ffffffffa000a017>] mwait_check_init+0x17/0x1000 [mwait_check]
RSP: e02b:ffff8801c298bf18  EFLAGS: 00010282
RAX: ffff8801c298a010 RBX: ffffffffa03b2000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8801c29800d8 RDI: ffff8801ff097200
RBP: ffff8801c298bf18 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: ffffffffa000a000 R14: 0000005148db7294 R15: 0000000000000003
FS:  00007fbb364f2700(0000) GS:ffff8801ff08c000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000179f038 CR3: 00000001c9469000 CR4: 0000000000002660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process insmod (pid: 5036, threadinfo ffff8801c298a000, task ffff8801c29cd7e0)
Stack:
 ffff8801c298bf48 ffffffff81002124 ffffffffa03b2000 00000000000081fd
 000000000178f010 000000000178f030 ffff8801c298bf78 ffffffff810c41e6
 00007fff3fb30db9 00007fff3fb30db9 00000000000081fd 0000000000010000
Call Trace:
 [<ffffffff81002124>] do_one_initcall+0x124/0x170
 [<ffffffff810c41e6>] sys_init_module+0xc6/0x220
 [<ffffffff815b15b9>] system_call_fastpath+0x16/0x1b
Code: <0f> 01 c8 31 c0 0f 01 c9 c9 c3 00 00 00 00 00 00 00 00 00 00 00 00
RIP  [<ffffffffa000a017>] mwait_check_init+0x17/0x1000 [mwait_check]
 RSP <ffff8801c298bf18>
---[ end trace 16582fc8a3d1e29a ]---
Kernel panic - not syncing: Fatal exception

With this module (which is what acpi_pad.c would hit):

MODULE_AUTHOR("Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>");
MODULE_DESCRIPTION("mwait_check_and_back");
MODULE_LICENSE("GPL");
MODULE_VERSION();

static int __init mwait_check_init(void)
{
	__monitor((void *)&current_thread_info()->flags, 0, 0);
	__mwait(0, 0);
	return 0;
}
static void __exit mwait_check_exit(void)
{
}
module_init(mwait_check_init);
module_exit(mwait_check_exit);
Reported-by: NLiu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This has been obsolescent for a while, fix documentation and
misc comments.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

For the hypervisor to take advantage of the MWAIT support it needs
to extract from the ACPI _CST the register address. But the
hypervisor does not have the support to parse DSDT so it relies on
the initial domain (dom0) to parse the ACPI Power Management information
and push it up to the hypervisor. The pushing of the data is done
by the processor_harveset_xen module which parses the information that
the ACPI parser has graciously exposed in 'struct acpi_processor'.

For the ACPI parser to also expose the Cx states for MWAIT, we need
to expose the MWAIT capability (leaf 1). Furthermore we also need to
expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly
function.

The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX
operations, but it can't do it since it needs to be backwards compatible.
Instead we choose to use the native CPUID to figure out if the MWAIT
capability exists and use the XEN_SET_PDC query hypercall to figure out
if the hypervisor wants us to expose the MWAIT_LEAF capability or not.

Note: The XEN_SET_PDC query was implemented in c/s 23783:
"ACPI: add _PDC input override mechanism".

With this in place, instead of
 C3 ACPI IOPORT 415
we get now
 C3:ACPI FFH INTEL MWAIT 0x20

Note: The cpu_idle which would be calling the mwait variants for idling
never gets set b/c we set the default pm_idle to be the hypercall variant.
Acked-by: NJan Beulich <JBeulich@suse.com>
[v2: Fix missing header file include and #ifdef]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

[Pls also look at https://lkml.org/lkml/2012/2/10/228]

Using of PAT to change pages from WB to WC works quite nicely.
Changing it back to WB - not so much. The crux of the matter is
that the code that does this (__page_change_att_set_clr) has only
limited information so when it tries to the change it gets
the "raw" unfiltered information instead of the properly filtered one -
and the "raw" one tell it that PSE bit is on (while infact it
is not).  As a result when the PTE is set to be WB from WC, we get
tons of:

:WARNING: at arch/x86/xen/mmu.c:475 xen_make_pte+0x67/0xa0()
:Hardware name: HP xw4400 Workstation
.. snip..
:Pid: 27, comm: kswapd0 Tainted: G        W    3.2.2-1.fc16.x86_64 #1
:Call Trace:
: [<ffffffff8106dd1f>] warn_slowpath_common+0x7f/0xc0
: [<ffffffff8106dd7a>] warn_slowpath_null+0x1a/0x20
: [<ffffffff81005a17>] xen_make_pte+0x67/0xa0
: [<ffffffff810051bd>] __raw_callee_save_xen_make_pte+0x11/0x1e
: [<ffffffff81040e15>] ? __change_page_attr_set_clr+0x9d5/0xc00
: [<ffffffff8114c2e8>] ? __purge_vmap_area_lazy+0x158/0x1d0
: [<ffffffff8114cca5>] ? vm_unmap_aliases+0x175/0x190
: [<ffffffff81041168>] change_page_attr_set_clr+0x128/0x4c0
: [<ffffffff81041542>] set_pages_array_wb+0x42/0xa0
: [<ffffffff8100a9b2>] ? check_events+0x12/0x20
: [<ffffffffa0074d4c>] ttm_pages_put+0x1c/0x70 [ttm]
: [<ffffffffa0074e98>] ttm_page_pool_free+0xf8/0x180 [ttm]
: [<ffffffffa0074f78>] ttm_pool_mm_shrink+0x58/0x90 [ttm]
: [<ffffffff8112ba04>] shrink_slab+0x154/0x310
: [<ffffffff8112f17a>] balance_pgdat+0x4fa/0x6c0
: [<ffffffff8112f4b8>] kswapd+0x178/0x3d0
: [<ffffffff815df134>] ? __schedule+0x3d4/0x8c0
: [<ffffffff81090410>] ? remove_wait_queue+0x50/0x50
: [<ffffffff8112f340>] ? balance_pgdat+0x6c0/0x6c0
: [<ffffffff8108fb6c>] kthread+0x8c/0xa0

for every page. The proper fix for this is has been posted
and is https://lkml.org/lkml/2012/2/10/228
"x86/cpa: Use pte_attrs instead of pte_flags on CPA/set_p.._wb/wc operations."
along with a detailed description of the problem and solution.

But since that posting has gone nowhere I am proposing
this band-aid solution so that at least users don't get
the page corruption (the pages that are WC don't get changed to WB
and end up being recycled for filesystem or other things causing
mysterious crashes).

The negative impact of this patch is that users of WC flag
(which are InfiniBand, radeon, nouveau drivers) won't be able
to set that flag - so they are going to see performance degradation.
But stability is more important here.

Fixes RH BZ# 742032, 787403, and 745574
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 7347b408 "xen: Allow
unprivileged Xen domains to create iomap pages" added a redundant
line in the early bootup code to filter out the PTE. That
filtering is already done a bit earlier so this extra processing
is not required.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them
for further code clean up.

I don't know much of xen code. But, since the code is in x86 architecture,
the percpu_xxx is exactly same as this_cpu_xxx serials functions. So, the
change is safe.
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Acked-by: NChristoph Lameter <cl@gentwo.org>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>