Currently, while rebinding, cgroup_dummy_root serves as the anchor
point.  In addition to the target root, rebind_subsystems() takes
@added_mask and @removed_mask.  The subsystems specified in the former
are expected to be on the dummy root and then moved to the target
root.  The ones in the latter are moved from non-dummy root to dummy.
Now that the dummy root is a fully functional one and we're planning
to use it for the default unified hierarchy, this level of distinction
between dummy and non-dummy roots is quite awkward.

This patch updates rebind_subsystems() to take the target root and one
subsystem mask and move the specified subsystmes to the target root
which may or may not be the dummy root.  IOW, unbinding now becomes
moving the subsystems to the dummy root and binding to non-dummy root.
This makes the dummy root mostly equivalent to other hierarchies in
terms of the mechanism of moving subsystems around; however, we still
retain all the semantical restrictions so that this patch doesn't
introduce any visible behavior differences.  Another noteworthy detail
is that rebind_subsystems() guarantees that moving a subsystem to the
dummy root never fails so that valid unmounting attempts always
succeed.

This unifies binding and unbinding of subsystems.  The invocation
points of ->bind() were inconsistent between the two and now moved
after whole rebinding is complete.  This doesn't break the current
users and generally makes more sense.

All rebind_subsystems() users are converted accordingly.  Note that
cgroup_remount() now makes two calls to rebind_subsystems() to bind
and then unbind the requested subsystems.

This will allow repurposing of the dummy hierarchy as the default
unified hierarchy and shouldn't make any userland visible behavior
difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

The dummy hierarchy is now a fully functional one and dummy_top has a
kernfs_node associated with it.  Drop the NULL checks in
[pr_cont_]cont_{name|path}() which are no longer necessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_dummy_root is used to host controllers which aren't attached to
any other hierarchy.  The root is minimally set up during kernfs
bootstrap and didn't go through full hierarchy initialization.  We're
planning to use cgroup_dummy_root for the default unified hierarchy
and thus want it to be fully functional.

Replace the special initialization, which was collected into
cgroup_init() by the previous patch, with an invocation of
cgroup_setup_root().  This simplifies the init path and makes
cgroup_dummy_root a full hierarchy with its own kernfs_root and all.

As this puts the dummy hierarchy on the cgroup_roots list, rename
for_each_active_root() to for_each_root() and update its users to skip
the dummy root for now.

This patch doesn't cause any userland visible behavior changes at this
point.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

* Fields of init_css_set and css_set_count are now set using
  initializer instead of programmatically from cgroup_init_early().

* init_cgroup_root() now also takes @opts and performs the optional
  part of initialization too.  The leftover part of
  cgroup_root_from_opts() is collapsed into its only caller -
  cgroup_mount().

* Initialization of cgroup_root_count and linking of init_css_set are
  moved from cgroup_init_early() to to cgroup_init().  None of the
  early_init users depends on init_css_set being linked.

* Subsystem initializations are moved after dummy hierarchy init and
  init_css_set linking.

These changes reorganize the bootstrap logic so that the dummy
hierarchy can share the usual hierarchy init path and be made more
normal.  These changes don't make noticeable behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

In cgroup_destroy_locked(), move setting of CGRP_DEAD above
invocations of kill_css().  This doesn't make any visible behavior
difference now but will be used to inhibit manipulating controller
enable states of a dying cgroup on the unified hierarchy.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

We no longer use task_lock() to protect tsk->cgroups.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

cgroup_subsys->fork() callback is special in that it's called outside
the usual cgroup locking and may race with on-going migration.
freezer_fork() currently doesn't consider such race condition;
however, it is still correct thanks to the fact that freeze_task() may
be called spuriously.

This is quite subtle.  Let's explain what's going on and add test to
detect racing and losing to task migration and skip freeze_task() in
such cases for documentation.

This doesn't make any behavior difference meaningful to userland.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>

cgroup_transfer_tasks() can currently fail in the middle due to memory
allocation failure.  When that happens, the function just aborts and
returns error code and there's no way to tell how many actually got
migrated at the point of failure and or to revert the partial
migration.

Update it to use cgroup_migrate{_add_src|prepare_dst|migrate|finish}()
so that the function either succeeds or fails as a whole as long as
->can_attach() doesn't fail.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

For optimization, task_lock() is additionally used to protect
task->cgroups.  The optimization is pretty dubious as either
css_set_rwsem is grabbed anyway or PF_EXITING already protects
task->cgroups.  It adds only overhead and confusion at this point.
Let's drop task_[un]lock() and update comments accordingly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

When a new process is forked, cgroup_fork() associates it with the
css_set of its parent but doesn't link it into it.  After the new
process is linked to tasklist, cgroup_post_fork() does the linking.

This is problematic for cgroup_transfer_tasks() as there's no way to
tell whether there are tasks which are pointing to a css_set but not
linked yet.  It is impossible to implement an operation which transfer
all tasks of a cgroup to another and the current
cgroup_transfer_tasks() can easily be tricked into leaving a newly
forked process behind if it gets called between cgroup_fork() and
cgroup_post_fork().

Let's make association with a css_set and linking atomic by moving it
to cgroup_post_fork().  cgroup_fork() sets child->cgroups to
init_css_set as a placeholder and cgroup_post_fork() is updated to
perform both the association with the parent's cgroup and linking
there.  This means that a newly created task will point to
init_css_set without holding a ref to it much like what it does on the
exit path.  Empty cg_list is used to indicate that the task isn't
holding a ref to the associated css_set.

This fixes an actual bug with cgroup_transfer_tasks(); however, I'm
not marking it for -stable.  The whole thing is broken in multiple
other ways which require invasive updates to fix and I don't think
it's worthwhile to bother with backporting this particular one.
Fortunately, the only user is cpuset and these bugs don't crash the
machine.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, process / task migration is a single operation which may
fail depending on memory pressure or the involved controllers'
->can_attach() callbacks.  One problem with this approach is migration
of multiple targets.  It's impossible to tell whether a given target
will be successfully migrated beforehand and cgroup core can't keep
track of enough states to roll back after intermediate failure.

This is already an issue with cgroup_transfer_tasks().  Also, we're
gonna need multiple target migration for unified hierarchy.

This patch splits migration into four stages -
cgroup_migrate_add_src(), cgroup_migrate_prepare_dst(),
cgroup_migrate() and cgroup_migrate_finish(), where
cgroup_migrate_prepare_dst() performs all the operations which may
fail due to allocation failure without actually migrating the target.

The four separate stages mean that, disregarding ->can_attach()
failures, the success or failure of multi target migration can be
determined before performing any actual migration.  If preparations of
all targets succeed, the whole thing will succeed.  If not, the whole
operation can fail without any side-effect.

Since the previous patch to use css_set->mg_tasks to keep track of
migration targets, the only thing which may need memory allocation
during migration is the target css_sets.  cgroup_migrate_prepare()
pins all source and target css_sets and link them up.  Note that this
can be performed without holding threadgroup_lock even if the target
is a process.  As long as cgroup_mutex is held, no new css_set can be
put into play.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

This will be used by the planned migration path update.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, while migrating tasks from one cgroup to another,
cgroup_attach_task() builds a flex array of all target tasks;
unfortunately, this has a couple issues.

* Flex array has size limit.  On 64bit, struct task_and_cgroup is
  24bytes making the flex element limit around 87k.  It is a high
  number but not impossible to hit.  This means that the current
  cgroup implementation can't migrate a process with more than 87k
  threads.

* Process migration involves memory allocation whose size is dependent
  on the number of threads the process has.  This means that cgroup
  core can't guarantee success or failure of multi-process migrations
  as memory allocation failure can happen in the middle.  This is in
  part because cgroup can't grab threadgroup locks of multiple
  processes at the same time, so when there are multiple processes to
  migrate, it is imposible to tell how many tasks are to be migrated
  beforehand.

  Note that this already affects cgroup_transfer_tasks().  cgroup
  currently cannot guarantee atomic success or failure of the
  operation.  It may fail in the middle and after such failure cgroup
  doesn't have enough information to roll back properly.  It just
  aborts with some tasks migrated and others not.

To resolve the situation, this patch updates the migration path to use
task->cg_list to track target tasks.  The previous patch already added
css_set->mg_tasks and updated iterations in non-migration paths to
include them during task migration.  This patch updates migration path
to actually make use of it.

Instead of putting onto a flex_array, each target task is moved from
its css_set->tasks list to css_set->mg_tasks and the migration path
keeps trace of all the source css_sets and the associated cgroups.
Once all source css_sets are determined, the destination css_set for
each is determined, linked to the matching source css_set and put on a
separate list.

To iterate the target tasks, migration path just needs to iterat
through either the source or target css_sets, depending on whether
migration has been committed or not, and the tasks on their ->mg_tasks
lists.  cgroup_taskset is updated to contain the list_heads for source
and target css_sets and the iteration cursor.  cgroup_taskset_*() are
accordingly updated to walk through css_sets and their ->mg_tasks.

This resolves the above listed issues with moderate additional
complexity.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, while migrating tasks from one cgroup to another,
cgroup_attach_task() builds a flex array of all target tasks;
unfortunately, this has a couple issues.

* Flex array has size limit.  On 64bit, struct task_and_cgroup is
  24bytes making the flex element limit around 87k.  It is a high
  number but not impossible to hit.  This means that the current
  cgroup implementation can't migrate a process with more than 87k
  threads.

* Process migration involves memory allocation whose size is dependent
  on the number of threads the process has.  This means that cgroup
  core can't guarantee success or failure of multi-process migrations
  as memory allocation failure can happen in the middle.  This is in
  part because cgroup can't grab threadgroup locks of multiple
  processes at the same time, so when there are multiple processes to
  migrate, it is imposible to tell how many tasks are to be migrated
  beforehand.

  Note that this already affects cgroup_transfer_tasks().  cgroup
  currently cannot guarantee atomic success or failure of the
  operation.  It may fail in the middle and after such failure cgroup
  doesn't have enough information to roll back properly.  It just
  aborts with some tasks migrated and others not.

To resolve the situation, we're going to use task->cg_list during
migration too.  Instead of building a separate array, target tasks
will be linked into a dedicated migration list_head on the owning
css_set.  Tasks on the migration list are treated the same as tasks on
the usual tasks list; however, being on a separate list allows cgroup
migration code path to keep track of the target tasks by simply
keeping the list of css_sets with tasks being migrated, making
unpredictable dynamic allocation unnecessary.

In prepartion of such migration path update, this patch introduces
css_set->mg_tasks list and updates css_set task iterations so that
they walk both css_set->tasks and ->mg_tasks.  Note that ->mg_tasks
isn't used yet.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Pull in for-3.14-fixes to receive 532de3fc ("cgroup: update
cgroup_enable_task_cg_lists() to grab siglock") which conflicts with
afeb0f9f ("cgroup: relocate cgroup_enable_task_cg_lists()") and
the following cg_lists updates.  This is likely to cause further
conflicts down the line too, so let's merge it early.

As cgroup_enable_task_cg_lists() is relocated in for-3.15, this merge
causes conflict in the original position.  It's resolved by applying
siglock changes to the updated version in the new location.

Conflicts:
	kernel/cgroup.c
Signed-off-by: NTejun Heo <tj@kernel.org>

Currently, there's nothing preventing cgroup_enable_task_cg_lists()
from missing set PF_EXITING and race against cgroup_exit().  Depending
on the timing, cgroup_exit() may finish with the task still linked on
css_set leading to list corruption.  Fix it by grabbing siglock in
cgroup_enable_task_cg_lists() so that PF_EXITING is guaranteed to be
visible.

This whole on-demand cg_list optimization is extremely fragile and has
ample possibility to lead to bugs which can cause things like
once-a-year oops during boot.  I'm wondering whether the better
approach would be just adding "cgroup_disable=all" handling which
disables the whole cgroup rather than tempting fate with this
on-demand craziness.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org

Fengguang reported this bug:

BUG: unable to handle kernel NULL pointer dereference at 0000003c
IP: [<cc90b4ad>] cgroup_cfts_commit+0x27/0x1c1
...
Call Trace:
  [<cc9d1129>] ? kmem_cache_alloc_trace+0x33f/0x3b7
  [<cc90c6fc>] cgroup_add_cftypes+0x8f/0xca
  [<cd78b646>] cgroup_init+0x6a/0x26a
  [<cd764d7d>] start_kernel+0x4d7/0x57a
  [<cd7642ef>] i386_start_kernel+0x92/0x96

This happens in a corner case. If CGROUP_SCHED=y but CFS_BANDWIDTH=n &&
FAIR_GROUP_SCHED=n && RT_GROUP_SCHED=n, we have:

cpu_files[] = {
	{ }	/* terminate */
}

When we pass cpu_files to cgroup_apply_cftypes(), as cpu_files[0].ss
is NULL, we'll access NULL pointer.

The bug was introduced by commit de00ffa5
("cgroup: make cgroup_subsys->base_cftypes use cgroup_add_cftypes()").
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

My kernel fails to boot, because blkcg calls cgroup_path() while
cgroupfs is not mounted.

Fix both cgroup_name() and cgroup_path().
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

We should free the memory allocated in parse_cgroupfs_options() before
calling this function again.
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

css_set_lock has been converted to css_set_rwsem, and rwsem can't nest
inside rcu_read_lock.
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

kernel/cgroup.c:2256:1-3: WARNING: PTR_RET can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: coccinelle/api/ptr_ret.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

To fix:

arch/sparc/kernel/leon_pci_grpci2.c: In function 'grpci2_of_probe':
arch/sparc/kernel/leon_pci_grpci2.c:720:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
arch/sparc/kernel/leon_pci_grpci2.c:720:20: error: assignment makes pointer from integer without a cast [-Werror]
arch/sparc/kernel/leon_pci_grpci2.c:882:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
make[2]: *** [arch/sparc/kernel/leon_pci_grpci2.o] Error 1

According to Stephen, these types of failures are caused by commit
2bd59d48 ("cgroup: convert to kernfs") which was being included
implicitly via cgroup.h's inclusion of xattr.h (which has now been
removed).
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

With module support gone, a lot of functions no longer need to be
exported.  Unexport them.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_attach_task() is planned to go through restructuring.  Let's
tidy it up a bit in preparation.

* Update cgroup_attach_task() to receive the target task argument in
  @leader instead of @tsk.

* Rename @tsk to @task.

* Rename @retval to @ret.

This is purely cosmetic.

v2: get_nr_threads() was using uninitialized @task instead of @leader.
    Fixed.  Reported by Dan Carpenter.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>

The two functions don't have any users left.  Remove them along with
cgroup_taskset->cur_cgrp.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_taskset_cur_css() will be removed during the planned
resturcturing of migration path.  The only use of
cgroup_taskset_cur_css() is finding out the old cgroup_subsys_state of
the leader in cpuset_attach().  This usage can easily be removed by
remembering the old value from cpuset_can_attach().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

If !NULL, @skip_css makes cgroup_taskset_for_each() skip the matching
css.  The intention of the interface is to make it easy to skip css's
(cgroup_subsys_states) which already match the migration target;
however, this is entirely unnecessary as migration taskset doesn't
include tasks which are already in the target cgroup.  Drop @skip_css
from cgroup_taskset_for_each().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Daniel Borkmann <dborkman@redhat.com>

Instead of repeatedly locking and unlocking css_set_rwsem inside
cgroup_task_migrate(), update cgroup_attach_task() to grab it outside
of the loop and update cgroup_task_migrate() to use
put_css_set_locked().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

put_css_set() is performed in two steps - it first tries to put
without grabbing css_set_rwsem if such put wouldn't make the count
zero.  If that fails, it puts after write-locking css_set_rwsem.  This
patch separates out the second phase into put_css_set_locked() which
should be called with css_set_rwsem locked.

Also, put_css_set_taskexit() is droped and put_css_set() is made to
take @taskexit.  There are only a handful users of these functions.
No point in providing different variants.

put_css_locked() will be used by later changes.  This patch doesn't
introduce any functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

css_scan_tasks() doesn't have any user left.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Now that css_task_iter_start/next_end() supports blocking while
iterating, there's no reason to use css_scan_tasks() which is more
cumbersome to use and scheduled to be removed.

Convert all css_scan_tasks() usages in cpuset to
css_task_iter_start/next/end().  This simplifies the code by removing
heap allocation and callbacks.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently there are two ways to walk tasks of a cgroup -
css_task_iter_start/next/end() and css_scan_tasks().  The latter
builds on the former but allows blocking while iterating.
Unfortunately, the way css_scan_tasks() is implemented is rather
nasty, it uses a priority heap of pointers to extract some number of
tasks in task creation order and loops over them invoking the callback
and repeats that until it reaches the end.  It requires either
preallocated heap or may fail under memory pressure, while unlikely to
be problematic, the complexity is O(N^2), and in general just nasty.

We're gonna convert all css_scan_users() to
css_task_iter_start/next/end() and remove css_scan_users().  As
css_scan_tasks() users may block, let's convert css_set_lock to a
rwsem so that tasks can block during css_task_iter_*() is in progress.

While this does increase the chance of possible deadlock scenarios,
given the current usage, the probability is relatively low, and even
if that happens, the right thing to do is updating the iteration in
the similar way to css iterators so that it can handle blocking.

Most conversions are trivial; however, task_cgroup_path() now expects
to be called with css_set_rwsem locked instead of locking itself.
This is because the function is called with RCU read lock held and
rwsem locking should nest outside RCU read lock.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Reimplement cgroup_transfer_tasks() so that it repeatedly fetches the
first task in the cgroup and then tranfers it.  This achieves the same
result without using css_scan_tasks() which is scheduled to be
removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_task_count() read-locks css_set_lock and walks all tasks to
count them and then returns the result.  The only thing all the users
want is determining whether the cgroup is empty or not.  This patch
implements cgroup_has_tasks() which tests whether cgroup->cset_links
is empty, replaces all cgroup_task_count() usages and unexports it.

Note that the test isn't synchronized.  This is the same as before.
The test has always been racy.

This will help planned css_set locking update.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

Move it above so that prototype isn't necessary.  Let's also move the
definition of use_task_css_set_links next to it.

This is purely cosmetic.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Tasks are not linked on their css_sets until cgroup task iteration is
actually used.  This is to avoid incurring overhead on the fork and
exit paths for systems which have cgroup compiled in but don't use it.
     
This lazy binding also affects the task migration path.  It has to be
careful so that it doesn't link tasks to css_sets when task_cg_lists
linking is not enabled yet.  Unfortunately, this conditional linking
in the migration path interferes with planned migration updates.

This patch moves the lazy binding a bit earlier, to the first cgroup
mount.  It's a clear indication that cgroup is being used on the
system and task_cg_lists linking is highly likely to be enabled soon
anyway through "tasks" and "cgroup.procs" files.

This allows cgroup_task_migrate() to always link @tsk->cg_list.  Note
that it may still race with cgroup_post_fork() but who wins that race
is inconsequential.

While at it, make use_task_css_set_links a bool, add sanity checks in
cgroup_enable_task_cg_lists() and css_task_iter_start(), and update
the former so that it's guaranteed and assumes to run only once.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Before kernfs conversion, due to the way super_block lookup works,
cgroup roots were created and made visible before being fully
initialized.  This in turn required a special flag to mark that the
root hasn't been fully initialized so that the destruction path can
tell fully bound ones from half initialized.

That flag is CGRP_ROOT_SUBSYS_BOUND and no longer necessary after the
kernfs conversion as the lookup and creation of new root are atomic
w.r.t. cgroup_mutex.  This patch removes the flag and passes the
requests subsystem mask to cgroup_setup_root() so that it can set the
respective mask bits as subsystems are bound.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Disallow more mount options if sane_behavior.  Note that xattr used to
generate warning.

While at it, simplify option check in cgroup_mount() and update
sane_behavior comment in cgroup.h.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

This reverts commit ab3f5faa.
Explanation from Hugh:

  It's because more thorough testing, by others here, found that it
  wasn't always solving the problem: so I asked Tejun privately to
  hold off from sending it in, until we'd worked out why not.

  Most of our testing being on a v3,11-based kernel, it was perfectly
  possible that the problem was merely our own e.g. missing Tejun's
  8a2b7538 ("workqueue: fix ordered workqueues in NUMA setups").

  But that turned out not to be enough to fix it either. Then Filipe
  pointed out how percpu_ref_kill_and_confirm() uses call_rcu_sched()
  before we ever get to put the offline on to the workqueue: by the
  time we get to the workqueue, the ordering has already been lost.

  So, thanks for the Acks, but I'm afraid that this ordered workqueue
  solution is just not good enough: we should simply forget that patch
  and provide a different answer."
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Hugh Dickins <hughd@google.com>

This was being included implicitly via cgroup.h's inclusion of xattr.h
(which has now been removed).
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NTejun Heo <tj@kernel.org>