- 25 8月, 2012 1 次提交
-
-
由 Balaji T K 提交于
Add OMAP MMC related device tree data for OMAP5. Signed-off-by: NBalaji T K <balajitk@ti.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 22 8月, 2012 1 次提交
-
-
由 Michal Hocko 提交于
Each page mapped in a process's address space must be correctly accounted for in _mapcount. Normally the rules for this are straightforward but hugetlbfs page table sharing is different. The page table pages at the PMD level are reference counted while the mapcount remains the same. If this accounting is wrong, it causes bugs like this one reported by Larry Woodman: kernel BUG at mm/filemap.c:135! invalid opcode: 0000 [#1] SMP CPU 22 Modules linked in: bridge stp llc sunrpc binfmt_misc dcdbas microcode pcspkr acpi_pad acpi] Pid: 18001, comm: mpitest Tainted: G W 3.3.0+ #4 Dell Inc. PowerEdge R620/07NDJ2 RIP: 0010:[<ffffffff8112cfed>] [<ffffffff8112cfed>] __delete_from_page_cache+0x15d/0x170 Process mpitest (pid: 18001, threadinfo ffff880428972000, task ffff880428b5cc20) Call Trace: delete_from_page_cache+0x40/0x80 truncate_hugepages+0x115/0x1f0 hugetlbfs_evict_inode+0x18/0x30 evict+0x9f/0x1b0 iput_final+0xe3/0x1e0 iput+0x3e/0x50 d_kill+0xf8/0x110 dput+0xe2/0x1b0 __fput+0x162/0x240 During fork(), copy_hugetlb_page_range() detects if huge_pte_alloc() shared page tables with the check dst_pte == src_pte. The logic is if the PMD page is the same, they must be shared. This assumes that the sharing is between the parent and child. However, if the sharing is with a different process entirely then this check fails as in this diagram: parent | ------------>pmd src_pte----------> data page ^ other--------->pmd--------------------| ^ child-----------| dst_pte For this situation to occur, it must be possible for Parent and Other to have faulted and failed to share page tables with each other. This is possible due to the following style of race. PROC A PROC B copy_hugetlb_page_range copy_hugetlb_page_range src_pte == huge_pte_offset src_pte == huge_pte_offset !src_pte so no sharing !src_pte so no sharing (time passes) hugetlb_fault hugetlb_fault huge_pte_alloc huge_pte_alloc huge_pmd_share huge_pmd_share LOCK(i_mmap_mutex) find nothing, no sharing UNLOCK(i_mmap_mutex) LOCK(i_mmap_mutex) find nothing, no sharing UNLOCK(i_mmap_mutex) pmd_alloc pmd_alloc LOCK(instantiation_mutex) fault UNLOCK(instantiation_mutex) LOCK(instantiation_mutex) fault UNLOCK(instantiation_mutex) These two processes are not poing to the same data page but are not sharing page tables because the opportunity was missed. When either process later forks, the src_pte == dst pte is potentially insufficient. As the check falls through, the wrong PTE information is copied in (harmless but wrong) and the mapcount is bumped for a page mapped by a shared page table leading to the BUG_ON. This patch addresses the issue by moving pmd_alloc into huge_pmd_share which guarantees that the shared pud is populated in the same critical section as pmd. This also means that huge_pte_offset test in huge_pmd_share is serialized correctly now which in turn means that the success of the sharing will be higher as the racing tasks see the pud and pmd populated together. Race identified and changelog written mostly by Mel Gorman. {akpm@linux-foundation.org: attempt to make the huge_pmd_share() comment comprehensible, clean up coding style] Reported-by: NLarry Woodman <lwoodman@redhat.com> Tested-by: NLarry Woodman <lwoodman@redhat.com> Reviewed-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Ken Chen <kenchen@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 8月, 2012 1 次提交
-
-
由 Fabio Estevam 提交于
commit 7c5763b8 (drivers:misc: Remove MISC_DEVICES config option) removed CONFIG_MISC_DEVICES option, so remove the occurrences from the config files as well. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 19 8月, 2012 10 次提交
-
-
由 Michael Cree 提交于
Commit ec221208 ("Disintegrate asm/system.h for Alpha") removed asm/system.h however arch/alpha/oprofile/common.c requires definitions that were shifted from asm/system.h to asm/special_insns.h. Include that. Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Acked-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
The following build error occurred during an alpha build: net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Cc: <stable@vger.kernel.org> Signed-off-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Acked-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
After commit ec221208 ("Disintegrate asm/system.h for Alpha"), the fpu.h header which we install for userland started depending on special_insns.h which is not installed. However, fpu.h only uses that for __KERNEL__ code, so protect the inclusion the same way to avoid build breakage in glibc: /usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory Cc: stable@vger.kernel.org Reported-by: NMatt Turner <mattst88@gentoo.org> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Acked-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kautuk Consul 提交于
Commit d065bd81 ("mm: retry page fault when blocking on disk transfer") and 37b23e05 ("x86,mm: make pagefault killable") introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to ALPHA. Signed-off-by: NMohd. Faris <mohdfarisq2010@gmail.com> Signed-off-by: NKautuk Consul <consul.kautuk@gmail.com> Acked-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Acked-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
New helper: current_thread_info(). Allows to do a bunch of odd syscalls in C. While we are at it, there had never been a reason to do osf_getpriority() in assembler. We also get "namespace"-aware (read: consistent with getuid(2), etc.) behaviour from getx?id() syscalls now. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Acked-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Cree 提交于
Similar to x86/sparc/powerpc implementations except: 1) we implement an extremely efficient has_zero()/find_zero() sequence with both prep_zero_mask() and create_zero_mask() no-operations. 2) Our output from prep_zero_mask() differs in that only the lowest eight bits are used to represent the zero bytes nevertheless it can be safely ORed with other similar masks from prep_zero_mask() and forms input to create_zero_mask(), the two fundamental properties prep_zero_mask() must satisfy. Tests on EV67 and EV68 CPUs revealed that the generic code is essentially as fast (to within 0.5% of CPU cycles) of the old Alpha specific code for large quadword-aligned strings, despite the 30% extra CPU instructions executed. In contrast, the generic code for unaligned strings is substantially slower (by more than a factor of 3) than the old Alpha specific code. Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Acked-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Cree 提交于
Add sys_process_vm_readv and sys_process_vm_writev to Alpha. Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Acked-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Cree 提交于
Currently we export SOCK_NONBLOCK to user space but that conflicts with the definition from glibc leading to compilation errors in user programs (e.g. see Debian bug #658460). The generic socket.h restricts the definition of SOCK_NONBLOCK to the kernel, as does the MIPS specific socket.h, so let's do the same on Alpha. Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Acked-by: NMatt Turner <mattst88@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
Some of the arguments to {g,s}etsockopt are passed in userland pointers. If we try to use the 64bit entry point, we end up sometimes failing. For example, dhcpcd doesn't run in x32: # dhcpcd eth0 dhcpcd[1979]: version 5.5.6 starting dhcpcd[1979]: eth0: broadcasting for a lease dhcpcd[1979]: eth0: open_socket: Invalid argument dhcpcd[1979]: eth0: send_raw_packet: Bad file descriptor The code in particular is getting back EINVAL when doing: struct sock_fprog pf; setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &pf, sizeof(pf)); Diving into the kernel code, we can see: include/linux/filter.h: struct sock_fprog { unsigned short len; struct sock_filter __user *filter; }; net/core/sock.c: case SO_ATTACH_FILTER: ret = -EINVAL; if (optlen == sizeof(struct sock_fprog)) { struct sock_fprog fprog; ret = -EFAULT; if (copy_from_user(&fprog, optval, sizeof(fprog))) break; ret = sk_attach_filter(&fprog, sk); } break; arch/x86/syscalls/syscall_64.tbl: 54 common setsockopt sys_setsockopt 55 common getsockopt sys_getsockopt So for x64, sizeof(sock_fprog) is 16 bytes. For x86/x32, it's 8 bytes. This comes down to the pointer being 32bit for x32, which means we need to do structure size translation. But since x32 comes in directly to sys_setsockopt, it doesn't get translated like x86. After changing the syscall table and rebuilding glibc with the new kernel headers, dhcp runs fine in an x32 userland. Oddly, it seems like Linus noted the same thing during the initial port, but I guess that was missed/lost along the way: https://lkml.org/lkml/2011/8/26/452 [ hpa: tagging for -stable since this is an ABI fix. ] Bugzilla: https://bugs.gentoo.org/423649Reported-by: NMads <mads@ab3.no> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Link: http://lkml.kernel.org/r/1345320697-15713-1-git-send-email-vapier@gentoo.org Cc: H. J. Lu <hjl.tools@gmail.com> Cc: <stable@vger.kernel.org> v3.4..v3.5 Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 17 8月, 2012 2 次提交
-
-
由 Greg Ungerer 提交于
There is no specific atomic64 support code for any m68k CPUs, so we should select CONFIG_GENERIC_ATOMC64 for all. Remove the existing per CPU selection of this and select it for all m68k. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Greg Ungerer 提交于
The ColdFire CPU sub-arch has kernel clk code support, so select CONFIG_HAVE_CLK. Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
- 16 8月, 2012 2 次提交
-
-
由 Mark Salter 提交于
The generic atomic64 support came in 2009 to support the perf subsystem with the expectation that all architectures would implement atomic64 support. Since then, other optional parts of the generic kernel have also come to expect atomic64 support. This patch enables generic atomic64 support for C6X architecture. Signed-off-by: NMark Salter <msalter@redhat.com>
-
由 Mark Salter 提交于
C6X currently lacks Lx_CACHE_SHIFT defines which are needed in a few places in the generic kernel. This patch adds _SHIFT defines for the various caches and bases the Lx_CACHE_BYTES defines on them. Signed-off-by: NMark Salter <msalter@redhat.com>
-
- 15 8月, 2012 4 次提交
-
-
由 Stephen Boyd 提交于
Seems that Thomas' and my patches collided during the last merge window. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David S. Miller 提交于
On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2e (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 H. Peter Anvin 提交于
This reverts commit bacef661. This commit has been found to cause serious regressions on a number of ASUS machines at the least. We probably need to provide a 1:1 map in addition to the EFI virtual memory map in order for this to work. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Reported-and-bisected-by: NJérôme Carretero <cJ-ko@zougloub.eu> Cc: Jan Beulich <jbeulich@suse.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu
-
由 Suresh Siddha 提交于
Recent commit 332afa65 cleaned up a workaround that updates irq_cfg domain for legacy irq's that are handled by the IO-APIC. This was assuming that the recent changes in assign_irq_vector() were sufficient to remove the workaround. But this broke couple of AMD platforms. One of them seems to be sending interrupts to the offline cpu's, resulting in spurious "No irq handler for vector xx (irq -1)" messages when those cpu's come online. And the other platform seems to always send the interrupt to the last logical CPU (cpu-7). Recent changes had an unintended side effect of using only logical cpu-0 in the IO-APIC RTE (during boot for the legacy interrupts) and this broke the legacy interrupts not getting routed to the cpu-7 on the AMD platform, resulting in a boot hang. For now, reintroduce the removed workaround, (essentially not allowing the vector to change for legacy irq's when io-apic starts to handle the irq. Which also addressed the uninteded sife effect of just specifying cpu-0 in the IO-APIC RTE for those irq's during boot). Reported-and-tested-by: NRobert Richter <robert.richter@amd.com> Reported-and-tested-by: NBorislav Petkov <bp@amd64.org> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1344453412.29170.5.camel@sbsiddha-desk.sc.intel.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 14 8月, 2012 4 次提交
-
-
由 Gleb Natapov 提交于
If PMU counter has PEBS enabled it is not enough to disable counter on a guest entry since PEBS memory write can overshoot guest entry and corrupt guest memory. Disabling PEBS during guest entry solves the problem. Tested-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120809085234.GI3341@redhat.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yan, Zheng 提交于
The Westmere-EX uncore is similar to the Nehalem-EX uncore. The differences are: - Westmere-EX uncore has 10 instances of Cbox. The MSRs for Cbox8 and Cbox9 in the Westmere-EX aren't contiguous with Cbox 0~7. - The fvid field in the ZDP_CTL_FVC register in the Mbox is different. It's 5 bits in the Nehalem-EX, 6 bits in the Westmere-EX. Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344229882-3907-3-git-send-email-zheng.z.yan@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yan, Zheng 提交于
This patch includes following fixes and update: - Only some events in the Sbox and Mbox can use the match/mask registers, add code to check this. - The format definitions for xbr_mm_cfg and xbr_match registers in the Rbox are wrong, xbr_mm_cfg should use 32 bits, xbr_match should use 64 bits. - Cleanup the Rbox code. Compute the addresses extra registers in the enable_event function instead of the hw_config function. This simplifies the code in nhmex_rbox_alter_er(). Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344229882-3907-2-git-send-email-zheng.z.yan@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Borislav Petkov 提交于
Fix the following section mismatch: WARNING: arch/x86/kernel/cpu/built-in.o(.text+0x7ad9): Section mismatch in reference from the function uncore_types_exit() to the function .init.text:uncore_type_exit() The function uncore_types_exit() references the function __init uncore_type_exit(). This is often because uncore_types_exit lacks a __init annotation or the annotation of uncore_type_exit is wrong. caused by 14371cce ("perf: Add generic PCI uncore PMU device support"). Cc: Zheng Yan <zheng.z.yan@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1339741902-8449-8-git-send-email-zheng.z.yan@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 13 8月, 2012 1 次提交
-
-
由 Russell King 提交于
This partially reverts 357c9c1f (ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs). Although we only support StrongARM on the RiscPC, we need to keep the ARMv3 user access code for this platform because the bus does not understand half-word load/stores. Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 11 8月, 2012 8 次提交
-
-
由 Will Deacon 提交于
Commit 5a783cbc ("ARM: 7478/1: errata: extend workaround for erratum #720789") added workarounds for erratum #720789 to the range TLB invalidation functions with the observation that the erratum only affects SMP platforms. However, when running an SMP_ON_UP kernel on a uniprocessor platform we must take care to preserve the ASID as the workaround is not required. This patch ensures that we don't set the ASID to 0 when flushing the TLB on such a system, preserving the original behaviour with the workaround disabled. Cc: <stable@vger.kernel.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
Page migration encodes the pfn in the offset field of a swp_entry_t. For LPAE, we support physical addresses of up to 36 bits (due to sparsemem limitations with the size of page flags), requiring 24 bits to represent a pfn. A further 3 bits are used to encode a swp_entry into a pte, leaving 5 bits for the type field. Furthermore, the core code defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not get used. This patch reduces the width of the type field to 5 bits, allowing us to create up to 31 swapfiles of 64GB each. Cc: <stable@vger.kernel.org> Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
Swap entries are encoding in ptes such that !pte_present(pte) and pte_file(pte). The remaining bits of the descriptor are used to identify the swapfile and offset within it to the swap entry. When writing such a pte for a user virtual address, set_pte_at unconditionally sets the nG bit, which (in the case of LPAE) will corrupt the swapfile offset and lead to a BUG: [ 140.494067] swap_free: Unused swap offset entry 000763b4 [ 140.509989] BUG: Bad page map in process rs:main Q:Reg pte:0ec76800 pmd:8f92e003 This patch fixes the problem by only setting the nG bit for user mappings that are actually present. Cc: <stable@vger.kernel.org> Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Colin Cross 提交于
Many clocks that are used to provide sched_clock will reset during suspend. If read_sched_clock returns 0 after suspend, sched_clock will appear to jump forward. This patch resets cd.epoch_cyc to the current value of read_sched_clock during resume, which causes sched_clock() just after suspend to return the same value as sched_clock() just before suspend. In addition, during the window where epoch_ns has been updated before suspend, but epoch_cyc has not been updated after suspend, it is unknown whether the clock has reset or not, and sched_clock() could return a bogus value. Add a suspended flag, and return the pre-suspend epoch_ns value during this period. The new behavior is triggered by calling setup_sched_clock_needs_suspend instead of setup_sched_clock. Signed-off-by: NColin Cross <ccross@android.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Stephen Boyd 提交于
Now that ARM has implemented its spinlocks with tickets we don't need to use the generic lockbreak algorithm. Remove the Kconfig from ARM so that we use the arch_spin_is_contended() definition from the asm header. This also saves a word in each lock because we don't need the break_lock member anymore. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
VFPv4 support depends on the VFPv3 context save/restore code, so only advertise support in the hwcaps if the kernel can actually handle it. Cc: <stable@vger.kernel.org> # 3.1+ Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
Get rid of this warning.. arch/arm/kernel/built-in.o(.text+0xac78): Section mismatch in reference from the function init_cpu_topology() to the function .init.text:parse_dt_topology() The function init_cpu_topology() references the function __init parse_dt_topology(). This is often because init_cpu_topology lacks a __init annotation or the annotation of parse_dt_topology is wrong. Signed-off-by: NVenkatraman S <svenkatr@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Boie 提交于
GCC built with nonstandard options can enable -fpic by default. We never want this for 32-bit kernels and it will break the build. [ hpa: Notably the Android toolchain apparently does this. ] Change-Id: Iaab7d66e598b1c65ac4a4f0229eca2cd3d0d2898 Signed-off-by: NAndrew Boie <andrew.p.boie@intel.com> Link: http://lkml.kernel.org/r/1344624546-29691-1-git-send-email-andrew.p.boie@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 10 8月, 2012 3 次提交
-
-
由 Arnd Bergmann 提交于
ntosd2_init_i2c walks the ntosd2_i2c_info array, which it expects to be populated with at least one member. gcc correctly warns about the out-of-bounds access here. Since this can not possibly work, it's better to disable i2c support entirely on this board. Without this patch, building davinci_all_defconfig results in: arch/arm/mach-davinci/board-neuros-osd2.c: In function 'davinci_ntosd2_init': arch/arm/mach-davinci/board-neuros-osd2.c:187:20: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Andrey Porodko <panda@chelcom.ru>
-
由 Arnd Bergmann 提交于
Disabling CONFIG_BUG creates an insane amount of build warnings, which makes it useless to check for building defconfigs to see if new warnings show up. Without this patch, building tct_hammer_defconfig results in: net/packet/af_packet.c: In function 'tpacket_rcv': net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized] net/core/ethtool.c: In function 'ethtool_get_feature_mask': net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type] block/cfq-iosched.c: In function 'cfq_async_queue_prio': block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type] mm/bootmem.c: In function 'mark_bootmem': mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type] net/core/dev.c: In function 'skb_warn_bad_offload': net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable] drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup': include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] (and many more) The size of vmlinux increases by 1.78% because of this: size obj-arm/vmlinux.nobug text data bss dec hex filename 2108474 116916 55352 2280742 22cd26 obj-arm/vmlinux size obj-arm/vmlinux.bug text data bss dec hex filename 2150804 116916 53696 2321416 236c08 obj-arm/vmlinux Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
-
由 Arnd Bergmann 提交于
exynos_pm_add_dev_to_genpd is used if one or more out of a large number of Kconfig symbols are enabled. However the new exynos_defconfig selects none of those, so the function becomes unused. Marking it so lets the compiler automatically discard it. Without this patch, building exynos_defconfig results in: arch/arm/mach-exynos/pm_domains.c:118:123: warning: 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Rafael J. Wysocki <rjw@sisk.pl>
-
- 09 8月, 2012 3 次提交
-
-
由 Arnd Bergmann 提交于
It is not currently possible to build the gpmi-nand driver without also building the mxs-dma driver. Clarify this Kconfig and enable both in the defconfig file so we can build it again with both enabled. drivers/built-in.o: In function `gpmi_dma_filter': clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NDirk Behme <dirk.behme@de.bosch.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de>
-
由 Arnd Bergmann 提交于
Without this patch, building integrator_defconfig results in: arch/arm/mach-integrator/core.c:150:1: warning: data definition has no type or storage class [enabled by default] arch/arm/mach-integrator/core.c:150:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/arm/mach-integrator/core.c:150:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk>
-
由 Arnd Bergmann 提交于
The samsung PWM driver has moved to the new PWM subsystem, which changed the Kconfig symbol for that driver, but the rx1950 and gta02 boards still uses the old one. Without this patch, building s3c2410_defconfig results in: arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_lcd_power': arch/arm/mach-s3c24xx/mach-rx1950.c:430: undefined reference to `pwm_config' arch/arm/mach-s3c24xx/mach-rx1950.c:431: undefined reference to `pwm_disable' arch/arm/mach-s3c24xx/mach-rx1950.c:437: undefined reference to `pwm_config' arch/arm/mach-s3c24xx/mach-rx1950.c:438: undefined reference to `pwm_enable' arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_exit': arch/arm/mach-s3c24xx/mach-rx1950.c:504: undefined reference to `pwm_free' arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_init': arch/arm/mach-s3c24xx/mach-rx1950.c:487: undefined reference to `pwm_request' Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NTushar Behera <tushar.behera@linaro.org> Cc: Kukjin Kim <kgene.kim@samsung.com>
-