If a xhci controller does not provide a protocol speed ID (PSI) table, a
default one should be used instead. Add the default values to the
SuperSpeedPlus device capability. Overwrite the default ones if a PSI table
exists. See xHCI 1.1 sectio 7.2.2.1.1 for more info
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In most cases the devices with the speed set to USB_SPEED_SUPER_PLUS
are handled like regular SuperSpeed devices.
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

unlink_empty_async_suspended() is marked __maybe_unused.  This is
because its caller, ehci_bus_suspend(), is protected by "#ifdef
CONFIG_PM".  We should use the same protection here instead of
__maybe_unused.

unlink_empty_async_suspended() gets called only when the root hub is
suspended.  It's silly for it to call start_iaa_cycle() at such a
time; the IAA mechanism doesn't work when the root hub isn't running.
It should call end_unlink_async() instead.  But even this isn't
necessary, since there already is a call to end_iaa_cycle() right
before the call to unlink_empty_async_suspended().  All we have to do
is interchange the two subroutine calls.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Michael Reutman reports that an AMD/ATI EHCI host controller on one of
his computers does not stop transferring data when an active bulk QH
is unlinked from the async schedule.  Apparently that host controller
fails to implement the IAA mechanism correctly when an active QH is
unlinked.  This leads to data corruption, because the controller
continues to update the QH in memory when the driver doesn't expect
it.  As a result, the next URB submitted for that QH can hang, because
the link pointers for the TD queue have been messed up.  This
misbehavior is observed quite regularly.

To be fair, the EHCI spec (section 4.8.2) says that active QHs should
not be unlinked.  It goes on to recommend a procedure that involves
waiting for the QH to go inactive before unlinking it.  In the real
world this is impractical, not least because the QH may _never_ go
inactive.  (What were they thinking?)  Sometimes we have no choice but
to unlink an active QH.

In an attempt to avoid the problems that can ensue, this patch changes
how the driver decides when the unlink is complete.  In addition to
waiting through two IAA cycles, in cases where the QH was not known to
be inactive beforehand we now wait until a 2-ms period has elapsed
with the host controller making no change to the QH data structure
(the hw_current and hw_token fields in particular).  The intuition
here is that after such a long period, the endpoint must be NAKing and
hopefully the QH has been dropped from the host controller's internal
cache.  There's no way to know if this reasoning is really valid --
the spec is no help in this regard -- but at least this approach fixes
Michael's problem.

The test for whether the QH is already known to be inactive involves
the reason for unlinking the QH originally.  If it was unlinked
because it had halted, or it stopped in response to a short read, or
it overlaid a dummy TD (a silicon bug), then it certainly is inactive.
If it was unlinked because the TD queue was empty and no TDs have been
added to the queue in the meantime, then it must be inactive.  Or if
the hardware status indicates that the QH is currently halted (even if
that wasn't the reason for unlinking it), then it is inactive.
Otherwise, if none of those checks apply, we go through the 2-ms
delay.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NMichael Reutman <mreutman@epiqsolutions.com>
Tested-by: NMichael Reutman <mreutman@epiqsolutions.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch improves the way ehci-hcd handles the iaa_in_progress flag.
The current code is somewhat careless in this regard:

	The flag is meaningless when the root hub isn't running, most
	particularly after the root hub has been suspended.  But in
	start_iaa_cycle(), the driver checks the flag before checking
	the root hub's state.  They should be checked in the opposite
	order.

	That routine also sets the flag too early, before it has
	definitely committed to starting an IAA cycle.

	The flag is turned off in end_unlink_async().  Upcoming
	changes will call that routine at other times, not just at the
	end of an IAA cycle.  The two actions are logically separate
	(although related), so we separate out a new routine to be
	called in place of end_unlink_async() whenever an IAA cycle
	ends: end_iaa_cycle().

	iaa_in_progress should be turned off when the root hub is
	suspended -- we certainly don't want it still to be set when
	the root hub resumes.  Therefore the call to
	end_unlink_async() in ehci_bus_suspend() should also be
	replaced with a call to end_iaa_cycle().
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces the "exception" bitflag in the ehci_qh structure
with a more explicit "unlink_reason" bitmask.  This is for use in the
following patch, where we will need to have a good idea of the
reason for unlinking a QH, not just "something exceptional happened".
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NMichael Reutman <mreutman@epiqsolutions.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the USB fixes in here as well.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull USB driver fixes from Greg KH:
 "Here are some small USB fixes and new device ids for 4.5-rc2.  Nothing
  major here, full details are in the shortlog, and all of these have
  been in linux-next successfully"

* tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: option: fix Cinterion AHxx enumeration
  USB: mxu11x0: fix memory leak on usb_serial private data
  USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
  USB: serial: option: Adding support for Telit LE922
  USB: serial: visor: fix crash on detecting device without write_urbs
  USB: visor: fix null-deref at probe
  USB: cp210x: add ID for IAI USB to RS485 adaptor
  usb: hub: do not clear BOS field during reset device
  cdc-acm:exclude Samsung phone 04e8:685d
  usb: cdc-acm: send zero packet for intel 7260 modem
  usb: cdc-acm: handle unlinked urb in acm read callback

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 4.5-rc2.

  They resolve a number of reported problems (the ioctl one specifically
  has been pointed out by numerous people) and one patch adds some new
  device ids for the 8250_pci driver.  All have been in linux-next
  successfully"

* tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_pci: Add Intel Broadwell ports
  staging/speakup: Use tty_ldisc_ref() for paste kworker
  n_tty: Fix unsafe reference to "other" ldisc
  tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
  tty: Retry failed reopen if tty teardown in-progress
  tty: Wait interruptibly for tty lock on reopen

Pull staging fixes from Greg KH:
 "Here are some small staging driver fixes for 4.5-rc2.

  One of them predated 4.4-final, but I missed that merge window due to
  the holliday.  The others fix reported issues that have come up
  recently.  The tty change is needed for the speakup driver fix and has
  the ack of the tty driver maintainer as well, i.e.  myself :)

  All have been in linux-next with no reported issues"

* tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: speakup: fix read scrolled-back VT
  Staging: speakup: Fix getting port information
  Revert "Staging: panel: usleep_range is preferred over udelay"
  iio: adis_buffer: Fix out-of-bounds memory access

Pull driver core fix from Greg KH:
 "Here's a single driver core fix that resolves an issue a lot of users
  have been hitting for a while now.  It's been tested a lot and has
  been in linux-next successfully for a while"

* tag 'driver-core-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  base/platform: Fix platform drivers with no probe callback

Pull MIPS fix from Ralf Baechle:
 "Just a single revert for a patch which I had upstreamed out of
  sequence"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  Revert "MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function"

Pull x86 fixes from Thomas Gleixner:
 "A bit on the largish side due to a series of fixes for a regression in
  the x86 vector management which was introduced in 4.3.  This work was
  started in December already, but it took some time to fix all corner
  cases and a couple of older bugs in that area which were detected
  while at it

  Aside of that a few platform updates for intel-mid, quark and UV and
  two fixes for in the mm code:
   - Use proper types for pgprot values to avoid truncation
   - Prevent a size truncation in the pageattr code when setting page
     attributes for large mappings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/mm/pat: Avoid truncation when converting cpa->numpages to address
  x86/mm: Fix types used in pgprot cacheability flags translations
  x86/platform/quark: Print boundaries correctly
  x86/platform/UV: Remove EFI memmap quirk for UV2+
  x86/platform/intel-mid: Join string and fix SoC name
  x86/platform/intel-mid: Enable 64-bit build
  x86/irq: Plug vector cleanup race
  x86/irq: Call irq_force_move_complete with irq descriptor
  x86/irq: Remove outgoing CPU from vector cleanup mask
  x86/irq: Remove the cpumask allocation from send_cleanup_vector()
  x86/irq: Clear move_in_progress before sending cleanup IPI
  x86/irq: Remove offline cpus from vector cleanup
  x86/irq: Get rid of code duplication
  x86/irq: Copy vectormask instead of an AND operation
  x86/irq: Check vector allocation early
  x86/irq: Reorganize the search in assign_irq_vector
  x86/irq: Reorganize the return path in assign_irq_vector
  x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
  x86/irq: Validate that irq descriptor is still active
  x86/irq: Fix a race in x86_vector_free_irqs()
  ...

Pull timer fixes from Thomas Gleixner:
 "The timer departement delivers:

   - a regression fix for the NTP code along with a proper selftest
   - prevent a spurious timer interrupt in the NOHZ lowres code
   - a fix for user space interfaces returning the remaining time on
     architectures with CONFIG_TIME_LOW_RES=y
   - a few patches to fix COMPILE_TEST fallout"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/nohz: Set the correct expiry when switching to nohz/lowres mode
  clocksource: Fix dependencies for archs w/o HAS_IOMEM
  clocksource: Select CLKSRC_MMIO where needed
  tick/sched: Hide unused oneshot timer code
  kselftests: timers: Add adjtimex SETOFFSET validity tests
  ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
  itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
  posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
  timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
  hrtimer: Handle remaining time proper for TIME_LOW_RES
  clockevents/tcb_clksrc: Prevent disabling an already disabled clock

Pull scheduler fixes from Thomas Gleixner:
 "Three small fixes in the scheduler/core:

   - use after free in the numa code
   - crash in the numa init code
   - a simple spelling fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  pid: Fix spelling in comments
  sched/numa: Fix use-after-free bug in the task_numa_compare
  sched: Fix crash in sched_init_numa()

Pull perf fixes from Thomas Gleixner:
 "This is much bigger than typical fixes, but Peter found a category of
  races that spurred more fixes and more debugging enhancements.  Work
  started before the merge window, but got finished only now.

  Aside of that this contains the usual small fixes to perf and tools.
  Nothing particular exciting"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  perf: Remove/simplify lockdep annotation
  perf: Synchronously clean up child events
  perf: Untangle 'owner' confusion
  perf: Add flags argument to perf_remove_from_context()
  perf: Clean up sync_child_event()
  perf: Robustify event->owner usage and SMP ordering
  perf: Fix STATE_EXIT usage
  perf: Update locking order
  perf: Remove __free_event()
  perf/bpf: Convert perf_event_array to use struct file
  perf: Fix NULL deref
  perf/x86: De-obfuscate code
  perf/x86: Fix uninitialized value usage
  perf: Fix race in perf_event_exit_task_context()
  perf: Fix orphan hole
  perf stat: Do not clean event's private stats
  perf hists: Fix HISTC_MEM_DCACHELINE width setting
  perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
  perf tests: Remove wrong semicolon in while loop in CQM test
  perf: Synchronously free aux pages in case of allocation failure
  ...

Pull locking fix from Thomas Gleixner:
 "A single commit, which makes the rtmutex.wait_lock an irq safe lock.

  This prevents a potential deadlock which can be triggered by the rcu
  boosting code from rcu_read_unlock()"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtmutex: Make wait_lock irq safe

Pull IRQ fixes from Ingo Molnar:
 "Mostly irqchip driver fixes, but also an irq core crash fix and a
  build fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mxs: Add missing set_handle_irq()
  irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
  irqchip/gic-v3-its: Recompute the number of pages on page size change
  base: Export platform_msi_domain_[alloc,free]_irqs
  of: MSI: Simplify irqdomain lookup
  irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token
  irqchip: Fix dependencies for archs w/o HAS_IOMEM
  irqchip/s3c24xx: Mark init_eint as __maybe_unused
  genirq: Validate action before dereferencing it in handle_irq_event_percpu()

Pull debugobjects fix from Ingo Molnar:
 "Bump up debugobjects pool limit that bigger s390 systems kept running
  into"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Allow bigger number of early boot objects

Pull VFIO fix from Alex Williamson:
 "Use alternate group tracking for no-iommu"

* tag 'vfio-v4.5-rc2' of git://github.com/awilliam/linux-vfio:
  vfio/noiommu: Don't use iommu_present() to track fake groups

Pull i2c fixes from Wolfram Sang:
 "Here are two I2C driver regression fixes.  piix4 gets a larger
  overhaul fixing the latest refactoring and also an older known issue
  as well.  designware-pci gets a fix for a bad merge conflict
  resolution"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: don't regress on bus names
  i2c: designware-pci: use IRQF_COND_SUSPEND flag
  i2c: piix4: Fully initialize SB800 before it is registered
  i2c: piix4: Fix SB800 locking

Accidentally discovered this typo when I studied this module.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Xinwei Hu <huxinwei@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1454119457-11272-1-git-send-email-thunder.leizhen@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 - Fix 'perf stat' stddev reporting due to mistakenly cleaning event
   private stats (Jiri Olsa)

 - Fix 'perf test CQM' endless loop detected by 'gcc6 -Wmisleading-indentation'
   (Markus Trippelsdorf)

 - Fix behaviour of Shift-Tab when nothing is focussed in the annotate TUI browser,
   detected with gcc6 -Wmisleading-indentation (Markus Trippelsdorf)

 - Fix mem data cacheline hists browser width setting for unresolved
   addresses (Jiri Olsa)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull ARM fixes from Russell King:
 "Just one fix for a -fstack-protector-strong problem from Kees Cook,
  and adding the new copy_file_range syscall"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: wire up copy_file_range() syscall
  ARM: 8500/1: fix atags_to_fdt with stack-protector-strong

Pull powerpc fixes from Michael Ellerman:
 - Wire up copy_file_range() syscall from Chandan Rajendra
 - Simplify module TOC handling from Alan Modra
 - Remove newly added extra definition of pmd_dirty from Stephen Rothwell
 - Allow user space to map rtas_rmo_buf from Vasant Hegde
 - Fix PE location code from Gavin Shan
 - Remove PPMU_HAS_SSLOT flag for Power8 from Madhavan Srinivasan
 - Fixup _HPAGE_CHG_MASK from Aneesh Kumar K.V

* tag 'powerpc-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fixup _HPAGE_CHG_MASK
  powerpc/perf: Remove PPMU_HAS_SSLOT flag for Power8
  powerpc/eeh: Fix PE location code
  powerpc/mm: Allow user space to map rtas_rmo_buf
  powerpc: Remove newly added extra definition of pmd_dirty
  powerpc: Simplify module TOC handling
  powerpc: Wire up copy_file_range() syscall

Pull s390 updates from Martin Schwidefsky:
 "An optimization for irq-restore, the SSM instruction is quite a bit
  slower than an if-statement and a STOSM.

  The copy_file_range system all is added.

  Cleanup for PCI and CIO.

  And a couple of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: update measurement characteristics
  s390/cio: ensure consistent measurement state
  s390/cio: fix measurement characteristics memleak
  s390/zcrypt: Fix cryptographic device id in kernel messages
  s390/pci: remove iomap sanity checks
  s390/pci: set error state for unusable functions
  s390/pci: fix bar check
  s390/pci: resize iomap
  s390/pci: improve ZPCI_* macros
  s390/pci: provide ZPCI_ADDR macro
  s390/pci: adjust IOMAP_MAX_ENTRIES
  s390/numa: move numa_init_late() from device to arch_initcall
  s390: remove all usages of PSW_ADDR_INSN
  s390: remove all usages of PSW_ADDR_AMODE
  s390: wire up copy_file_range syscall
  s390: remove superfluous memblock_alloc() return value checks
  s390/numa: allocate memory with correct alignment
  s390/irqflags: optimize irq restore
  s390/mm: use TASK_MAX_SIZE where applicable

Pull btrfs fixes from Chris Mason:
 "Dave had a small collection of fixes to the new free space tree code,
  one of which was keeping our sysfs files more up to date with feature
  bits as different things get enabled (lzo, raid5/6, etc).

  I should have kept the sysfs stuff for rc3, since we always manage to
  trip over something.  This time it was GFP_KERNEL from somewhere that
  is NOFS only.  Instead of rebasing it out I've put a revert in, and
  we'll fix it properly for rc3.

  Otherwise, Filipe fixed a btrfs DIO race and Qu Wenruo fixed up a
  use-after-free in our tracepoints that Dave Jones reported"

* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Revert "btrfs: synchronize incompat feature bits with sysfs files"
  btrfs: don't use GFP_HIGHMEM for free-space-tree bitmap kzalloc
  btrfs: sysfs: check initialization state before updating features
  Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
  btrfs: async-thread: Fix a use-after-free error for trace
  Btrfs: fix race between fsync and lockless direct IO writes
  btrfs: add free space tree to the cow-only list
  btrfs: add free space tree to lockdep classes
  btrfs: tweak free space tree bitmap allocation
  btrfs: tests: switch to GFP_KERNEL
  btrfs: synchronize incompat feature bits with sysfs files
  btrfs: sysfs: introduce helper for syncing bits with sysfs files
  btrfs: sysfs: add free-space-tree bit attribute
  btrfs: sysfs: fix typo in compat_ro attribute definition

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are: cpuidle fixes (including one fix for a recent regression),
  cpufreq fixes (including fixes for two issues introduced during the
  4.2 cycle), generic power domains framework fixes (two locking fixes
  and one cleanup), one locking fix in the ACPI-based PCI hotplug
  framework (ACPIPHP), removal of one ACPI backlight blacklist entry
  that isn't necessary any more and a PM Kconfig cleanup.

  Specifics:

   - Fix a recent cpuidle core regression that broke suspend-to-idle on
     all systems where cpuidle drivers don't provide ->enter_freeze
     callbacks for any states (Sudeep Holla).

   - Drop an unnecessary symbol definition from the cpuidle core code
     handling coupled CPU cores (Anders Roxell).

   - Fix a race condition related to governor initialization and removal
     in the cpufreq core (Viresh Kumar).

   - Clean up the cpufreq core to use list_is_last() for checking if the
     given policy object is the last element of a list instead of open
     coding that in a clumsy way (Gautham R Shenoy).

   - Fix compiler warnings in the pxa2xx and cpufreq-dt cpufreq drivers
     (Arnd Bergmann).

   - Fix two locking issues and clean up a comment in the generic power
     domains framework (Ulf Hansson, Marek Szyprowski, Moritz Fischer).

   - Fix the error code path of one function in the ACPI-based PCI
     hotplug framework (ACPIPHP) that forgets to release a lock acquired
     previously (Insu Yun).

   - Drop the ACPI backlight blacklist entry for Dell Inspiron 5737 that
     is not necessary any more (Hans de Goede).

   - Clean up the top-level PM Kconfig to stop requiring APM emulation
     to depend on PM which in fact isn't necessary (Arnd Bergmann)"

* tag 'pm+acpi-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
  cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
  PM: APM_EMULATION does not depend on PM
  cpufreq: Use list_is_last() to check last entry of the policy list
  cpufreq: Fix NULL reference crash while accessing policy->governor_data
  cpuidle: coupled: remove unused define cpuidle_coupled_lock
  PM / Domains: Fix typo in comment
  PM / Domains: Fix potential deadlock while adding/removing subdomains
  ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
  ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"
  cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze
  PM / domains: fix lockdep issue for all subdomains

Pull swiotlb patchlet from Konrad Rzeszutek Wilk:
 "One trivial patch.

  Another patch (from Fengguang) is already in your tree courtesy of
  Andrew Morton - but I would prefer not to rebase my tree.  Hence the
  diff is very small"

* 'stable/for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Make linux/swiotlb.h standalone includible
  MAINTAINERS: add git URL for swiotlb

Pull cleancache cleanups from Konrad Rzeszutek Wilk:
 "Simple cleanups"

* 'stable/for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm:
  include/linux/cleancache.h: Clean up code
  cleancache: constify cleancache_ops structure

Pull IOMMU fixes from Joerg Roedel:
 "Five patches queued up:

   - Two patches for the AMD and Intel IOMMU drivers to fix alias
     handling and ATS handling.

   - Fix build error with arm io-pgtable code

   - Two documentation fixes"

* tag 'iommu-fixes-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Update struct iommu_ops comments
  iommu/vt-d: Fix link to Intel IOMMU Specification
  iommu/amd: Correct the wrong setting of alias DTE in do_attach
  iommu/vt-d: Don't skip PCI devices when disabling IOTLB
  iommu/io-pgtable-arm: Fix io-pgtable-arm build failure

Merge tag 'hwmon-for-linus-v4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 - Use bit mask to calculate tdp limit in fam15h_power driver
 - Black-list Dell Studio XPS 8000 in dell-smm driver

* tag 'hwmon-for-linus-v4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (fam15h_power) Add bit masking for tdp_limit
  hwmon: (dell-smm) Blacklist Dell Studio XPS 8000

Pull SCSI fixes from James Bottomley:
 "Four fixes: one to try to fix our repeated intermittent crashes in
  suspend/resume, one to correct a regression in the optimal I/O size
  reporting and a couple for randconfig build failures in the hisi_sas
  driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  SCSI: fix crashes in sd and sr runtime PM
  sd: Optimal I/O size is in bytes, not sectors
  hisi_sas: Restrict SCSI_HISI_SAS to arm64
  hisi_sas: SCSI_HISI_SAS should depend on HAS_DMA

Pull block layer fix from Jens Axboe:
 "This just contains the fix for the split issue that we had in -rc1.

  It's been well tested at this point, so let's get it in mainline so we
  don't have the same split issue for -rc2"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix bio splitting on max sectors

* pm-cpuidle:
  cpuidle: coupled: remove unused define cpuidle_coupled_lock
  cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze

* pm-cpufreq:
  cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
  cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
  cpufreq: Use list_is_last() to check last entry of the policy list
  cpufreq: Fix NULL reference crash while accessing policy->governor_data

* pm-domains:
  PM / Domains: Fix typo in comment
  PM / Domains: Fix potential deadlock while adding/removing subdomains
  PM / domains: fix lockdep issue for all subdomains

* pm-sleep:
  PM: APM_EMULATION does not depend on PM

* acpi-video:
  ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"

* acpi-hotplug:
  ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()

Pull sound fixes from Takashi Iwai:
 "There are a few fixes in ALSA core for bugs that have been spotted by
  fuzzer.  Also a temporary workaround for PowerPC (and possibly other)
  builds with incompatible ioctls was applied to compress API.

  Other than that, a few trivial fixes and quirks for FireWire BeBoB,
  USB-audio and HD-audio are found, too"

* tag 'sound-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - disable dynamic clock gating on Broxton before reset
  ALSA: hda - Add new GPU codec ID 0x10de0083 to snd-hda
  ALSA: dummy: Disable switching timer backend via sysfs
  ALSA: timer: fix SND_PCM_TIMER Kconfig text
  ALSA: Add missing dependency on CONFIG_SND_TIMER
  ALSA: bebob: Use a signed return type for get_formation_index
  ALSA: usb-audio: Fix TEAC UD-501/UD-503/NT-503 usb delay
  ALSA: compress: Disable GET_CODEC_CAPS ioctl for some architectures
  ALSA: seq: Degrade the error message for too many opens
  ALSA: seq: Fix incorrect sanity check at snd_seq_oss_synth_cleanup()

Pull drm fixes from Dave Airlie:
 "Summary:

  - Misc amdgpu/radeon fixes
  - VC4 build fix
  - vmwgfx fix
  - misc rockchip fixes

  The etnaviv guys had an API feature they wanted in their first
  release, so I've merged that with their fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (41 commits)
  drm/vmwgfx: respect 'nomodeset'
  drm/amdgpu: only move pt bos in LRU list on success
  drm/radeon: fix DP audio support for APU with DCE4.1 display engine
  drm/radeon: Add a common function for DFS handling
  drm/radeon: cleaned up VCO output settings for DP audio
  drm/amd/powerplay: Update SMU firmware loading for Stoney
  drm/etnaviv: call correct function when trying to vmap a DMABUF
  drm/etnaviv: rename etnaviv_gem_vaddr to etnaviv_gem_vmap
  drm/etnaviv: fix get pages error path in etnaviv_gem_vaddr
  drm/etnaviv: fix memory leak in IOMMU init path
  drm/etnaviv: add further minor features and varyings count
  drm/etnaviv: add helper for comparing model/revision IDs
  drm/etnaviv: add helper to extract bitfields
  drm/etnaviv: use defined constants for the chip model
  drm/etnaviv: update common and state_hi xml.h files
  drm/etnaviv: ignore VG GPUs with FE2.0
  drm/amdgpu: don't init fbdev if we don't have any connectors
  drm/radeon: only init fbdev if we have connectors
  drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl
  drm/etnaviv: fix failure path if model is zero
  ...