Most distributions enable sysrq support but set it to 0 by default.  Add a
sysrq_always_enabled boot option to always-enable sysrq keys.  Useful for
debugging - without having to modify the disribution's config files (which
might not be possible if the kernel is on a live CD, etc.).

Also, while at it, clean up the sysrq interfaces.

[bunk@stusta.de: make sysrq_always_enabled_setup() static]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement block device specific .direct_IO method instead of going through
generic direct_io_worker for block device.

direct_io_worker() is fairly complex because it needs to handle O_DIRECT on
file system, where it needs to perform block allocation, hole detection,
extents file on write, and tons of other corner cases.  The end result is
that it takes tons of CPU time to submit an I/O.

For block device, the block allocation is much simpler and a tight triple
loop can be written to iterate each iovec and each page within the iovec in
order to construct/prepare bio structure and then subsequently submit it to
the block layer.  This significantly speeds up O_D on block device.

[akpm@osdl.org: small speedup]
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update ocfs2_should_update_atime() to understand the MNT_RELATIME flag and
to test against mtime / ctime accordingly.

[akpm@osdl.org: cleanups]
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add "relatime" (relative atime) support.  Relative atime only updates the
atime if the previous atime is older than the mtime or ctime.  Like
noatime, but useful for applications like mutt that need to know when a
file has been read since it was last modified.

A corresponding patch against mount(8) is available at
http://userweb.kernel.org/~akpm/mount-relative-atime.txtSigned-off-by: NValerie Henson <val_henson@linux.intel.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Karel Zak <kzak@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Simplify touch_atime() layout.

Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The kernel termios (ktermios) changes were somehow missed for Xtensa.  This
patch adds the ktermios structure and also includes some minor file name
fix that was missed in the syscall patch.
Signed-off-by: NChris Zankel <chris@zankel.net>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently, to tell a task that it should go to the refrigerator, we set the
PF_FREEZE flag for it and send a fake signal to it.  Unfortunately there
are two SMP-related problems with this approach.  First, a task running on
another CPU may be updating its flags while the freezer attempts to set
PF_FREEZE for it and this may leave the task's flags in an inconsistent
state.  Second, there is a potential race between freeze_process() and
refrigerator() in which freeze_process() running on one CPU is reading a
task's PF_FREEZE flag while refrigerator() running on another CPU has just
set PF_FROZEN for the same task and attempts to reset PF_FREEZE for it.  If
the refrigerator wins the race, freeze_process() will state that PF_FREEZE
hasn't been set for the task and will set it unnecessarily, so the task
will go to the refrigerator once again after it's been thawed.

To solve first of these problems we need to stop using PF_FREEZE to tell
tasks that they should go to the refrigerator.  Instead, we can introduce a
special TIF_*** flag and use it for this purpose, since it is allowed to
change the other tasks' TIF_*** flags and there are special calls for it.

To avoid the freeze_process()-refrigerator() race we can make
freeze_process() to always check the task's PF_FROZEN flag after it's read
its "freeze" flag.  We should also make sure that refrigerator() will
always reset the task's "freeze" flag after it's set PF_FROZEN for it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently, if a task is stopped (ie.  it's in the TASK_STOPPED state), it
is considered by the freezer as unfreezeable.  However, there may be a race
between the freezer and the delivery of the continuation signal to the task
resulting in the task running after we have finished freezing the other
tasks.  This, in turn, may lead to undesirable effects up to and including
data corruption.

To prevent this from happening we first need to make the freezer consider
stopped tasks as freezeable.  For this purpose we need to make freezeable()
stop returning 0 for these tasks and we need to force them to enter the
refrigerator.  However, if there's no continuation signal in the meantime,
the stopped tasks should remain stopped after all processes have been
thawed, so we need to send an additional SIGSTOP to each of them before
waking it up.

Also, a stopped task that has just been woken up should first check if
there's a freezing request for it and go to the refrigerator if that's the
case.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When some objects are allocated by one CPU but freed by another CPU we can
consume lot of cycles doing divides in obj_to_index().

(Typical load on a dual processor machine where network interrupts are
handled by one particular CPU (allocating skbufs), and the other CPU is
running the application (consuming and freeing skbufs))

Here on one production server (dual-core AMD Opteron 285), I noticed this
divide took 1.20 % of CPU_CLK_UNHALTED events in kernel.  But Opteron are
quite modern cpus and the divide is much more expensive on oldest
architectures :

On a 200 MHz sparcv9 machine, the division takes 64 cycles instead of 1
cycle for a multiply.

Doing some math, we can use a reciprocal multiplication instead of a divide.

If we want to compute V = (A / B)  (A and B being u32 quantities)
we can instead use :

V = ((u64)A * RECIPROCAL(B)) >> 32 ;

where RECIPROCAL(B) is precalculated to ((1LL << 32) + (B - 1)) / B

Note :

I wrote pure C code for clarity. gcc output for i386 is not optimal but
acceptable :

mull   0x14(%ebx)
mov    %edx,%eax // part of the >> 32
xor     %edx,%edx // useless
mov    %eax,(%esp) // could be avoided
mov    %edx,0x4(%esp) // useless
mov    (%esp),%ebx

[akpm@osdl.org: small cleanups]
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Elaborate the API for calling cpuset_zone_allowed(), so that users have to
explicitly choose between the two variants:

  cpuset_zone_allowed_hardwall()
  cpuset_zone_allowed_softwall()

Until now, whether or not you got the hardwall flavor depended solely on
whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask
argument.

If you didn't specify __GFP_HARDWALL, you implicitly got the softwall
version.

Unfortunately, this meant that users would end up with the softwall version
without thinking about it.  Since only the softwall version might sleep,
this led to bugs with possible sleeping in interrupt context on more than
one occassion.

The hardwall version requires that the current tasks mems_allowed allows
the node of the specified zone (or that you're in interrupt or that
__GFP_THISNODE is set or that you're on a one cpuset system.)

The softwall version, depending on the gfp_mask, might allow a node if it
was allowed in the nearest enclusing cpuset marked mem_exclusive (which
requires taking the cpuset lock 'callback_mutex' to evaluate.)

This patch removes the cpuset_zone_allowed() call, and forces the caller to
explicitly choose between the hardwall and the softwall case.

If the caller wants the gfp_mask to determine this choice, they should (1)
be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the
cpuset_zone_allowed_softwall() routine.

This adds another 100 or 200 bytes to the kernel text space, due to the few
lines of nearly duplicate code at the top of both cpuset_zone_allowed_*
routines.  It should save a few instructions executed for the calls that
turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to
set (before the call) then check (within the call) the __GFP_HARDWALL flag.

For the most critical call, from get_page_from_freelist(), the same
instructions are executed as before -- the old cpuset_zone_allowed()
routine it used to call is the same code as the
cpuset_zone_allowed_softwall() routine that it calls now.

Not a perfect win, but seems worth it, to reduce this chance of hitting a
sleeping with irq off complaint again.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

More cleanups for slab.h

1. Remove tabs from weird locations as suggested by Pekka

2. Drop the check for NUMA and SLAB_DEBUG from the fallback section
   as suggested by Pekka.

3. Uses static inline for the fallback defs as also suggested by Pekka.

4. Make kmem_ptr_valid take a const * argument.

5. Separate the NUMA fallback definitions from the kmalloc_track fallback
   definitions.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a response to an earlier discussion on linux-mm about splitting
slab.h components per allocator.  Patch is against 2.6.19-git11.  See
http://marc.theaimsgroup.com/?l=linux-mm&m=116469577431008&w=2

This patch cleans up the slab header definitions.  We define the common
functions of slob and slab in slab.h and put the extra definitions needed
for slab's kmalloc implementations in <linux/slab_def.h>.  In order to get
a greater set of common functions we add several empty functions to slob.c
and also rename slob's kmalloc to __kmalloc.

Slob does not need any special definitions since we introduce a fallback
case.  If there is no need for a slab implementation to provide its own
kmalloc mess^H^H^Hacros then we simply fall back to __kmalloc functions.
That is sufficient for SLOB.

Sort the function in slab.h according to their functionality.  First the
functions operating on struct kmem_cache * then the kmalloc related
functions followed by special debug and fallback definitions.

Also redo a lot of comments.

Signed-off-by: Christoph Lameter <clameter@sgi.com>?
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove calls to pci_disable_device except in fail_all_cmds.  The
pci_disable_device function does something nasty to Smart Array controllers
that pci_enable_device does not undo.  So if the driver is unloaded it
cannot be reloaded.

Also, customers can disable any pci device via the ROM Based Setup Utility
(RBSU).  If the customer has disabled the controller we should not try to
blindly enable the card from the driver.  Please consider this for
inclusion.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Map out more memory for our config table.  It's required to reach offset
0x214 to disable DMA on the P600.  I'm not sure how I lost this hunk.
Please consider this for inclusion.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When CONFIG_PCI is not defined (i.e.  PCI bus is disabled), the sx driver
fails to link, since some pci functions are not available.  Fix this
behaviour to be able to compile this driver on machines with no PCI bus
(but with ISA bus support).
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When CONFIG_PCI is not defined (i.e.  PCI bus is disabled), the mxser_new
driver fails to link, since some pci functions are not available.  Fix this
behaviour to be able to compile this driver on machines with no PCI bus
(but with ISA bus support).
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_PCI=n:
drivers/char/isicom.c: In function 'isicom_probe':
drivers/char/isicom.c:1793: warning: implicit declaration of function
'pci_request_region'
drivers/char/isicom.c:1827: warning: implicit declaration of function
'pci_release_region'

Let's CONFIG_ISI depend on CONFIG_PCI.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on patch from Alexander Rigbo <alexander.rigbo@acgnystrom.se>
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It seems macbooks set bit 2 but not bit 0, which is an "enabled but vmxon will
fault" setting.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Tested-by: Alex Larsson (sometimes testing helps)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

They're not on speaking terms.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Thanks Jens for alerting me to this.

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: <raziebe@gmail.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The previous checkstack fix for UML, which needs to use the host's tools,
was wrong in the crossbuilding case.  It would use the build host's, rather
than the target's, toolchain.

This patch removes the old fix and adds an explicit special case for UML,
leaving everyone else alone.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fallback_alloc() does not do the check for GFP_WAIT as done in
cache_grow().  Thus interrupts are disabled when we call kmem_getpages()
which results in the failure.

Duplicate the handling of GFP_WAIT in cache_grow().
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fields of struct pipe_buf_operations have not a precise layout (ie not
optimized to fit cache lines nor reduce cache line ping pongs)

The bufs[] array is *large* and is placed near the beginning of the
structure, so all following fields have a large offset.  This is
unfortunate because many archs have smaller instructions when using small
offsets relative to a base register.  On x86 for example, 7 bits offsets
have smaller instruction lengths.

Moving bufs[] at the end of pipe_buf_operations permits all fields to have
small offsets, and reduce text size, and icache pressure.

# size vmlinux.pre vmlinux
    text    data     bss     dec     hex filename
3268989  664356  492196 4425541  438745 vmlinux.pre
3268765  664356  492196 4425317  438665 vmlinux

So this patch reduces text size by 224 bytes on my x86_64 machine. Similar
results on ia32.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up a little.
Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added function sets "void (*conf_changed_callback)(void)".  Call it, if
.config's changed state changes.  Use above in qconf.cc to set gui's
save-widget's sensitvity.
Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Those two functions are
	void sym_set_change_count(int count)
and
	void sym_add_change_count(int count)

All write accesses to sym_change_count are replaced by calls to above
functions.

Variable and changer-functions are moved to confdata.c.  IMO thats ok, as
sym_change_count is an attribute of the .config's change state.
Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Run "make xconfig" on a freshly untarred kernel-tree.  Look at the floppy disk
icon of the qt application, that has just started: Its in a normal, active
state.

Mouse click on it: .config is being saved.

This patch series changes things so taht
after the mouse click on the floppy disk icon, the icon is greyed out.
If you mouse click on it now, nothing happens.

If you change some CONFIG_*, the floppy disk icon returns to "active state",
that is, if you mouse click it now, .config is written.

This patch:

Returns sym_change_count to reflect the .config's change state.
All read only accesses of
	sym_change_count
are replaced by calls to
	conf_get_changed()
.
mconfig.c is manipulated to ask for saving only when
conf_get_changed() returned true.
Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The code has been fixed to use kill_pid instead of kill_proc fix the
comments as well.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reverts commit 373beb35.

No one is using this identifier yet.  The purpose of this identifier is to
export nsproxy to user space which is wrong.  nsproxy is an internal
implementation optimization, which should keep our fork times from getting
slower as we increase the number of global namespaces you don't have to
share.

Adding a global identifier like this is inappropriate because it makes
namespaces inherently non-recursive, greatly limiting what we can do with
them in the future.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- pipe/splice should use const pipe_buf_operations and file_operations

- struct pipe_inode_info has an unused field "start" : get rid of it.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The pcd, pwt, and pat bits on page table entries affect the cpu cache.  Since
the cache is a host resource, the guest should not be able to control it.
Moreover, the meaning of these bits changes depending on whether pat is
enabled or not.

So, force these bits to zero on shadow page table entries at all times.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The arch splitting patchset left an extra put_cpu() in core code, where it can
cause trouble for CONFIG_PREEMPT kernels.
Reported-by: NHuihong Luo <huisinro@yahoo.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This makes the SET_SREGS ioctl behave symmetrically to the GET_SREGS ioctl wrt
the segment access rights flag.
Signed-off-by: NUri Lublin <uril@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Section .parainstructions should not warn about section mismatches.

WARNING: drivers/net/hamradio/scc.o - Section mismatch: reference to .exit.text: from .parainstructions after '' (at offset 0x0)
WARNING: drivers/net/hamradio/scc.o - Section mismatch: reference to .exit.text: from .parainstructions after '' (at offset 0x8)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

i2o_exec_exit and i2o_driver_exit were marked as __exit which is a bug
because both are invoked from __init and __exit functions.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Eliminate some possibilities for user processes writing to the Gigaset
character device to be left sleeping indefinitely, by adding wakeup calls
to error paths and properly disposing of pending write requests when the
device is disconnected.

It also removes unnecessary NULL checks before usb_free_urb() and
usb_kill_urb() calls.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>