We have facilities for reporting unexpected, unlikely errors, use them.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lkml.kernel.org/n/tip-c7j22xfjf1j773g7ufp607q0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In a1a58707 ("perf script: Use fprintf like printing uniformly")
there were a few cases that were missed, fix it.
Reported-by: Nyuzhoujian <yuzhoujian@didichuxing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sq9hvfk5mkjdqzlpyiq7jkos@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The current even timekeeping, which computes enabled and running
times, uses 3 distinct timestamps to reflect the various event states:
OFF (stopped), INACTIVE (enabled) and ACTIVE (running).

Furthermore, the update rules are such that even INACTIVE events need
their timestamps updated. This is undesirable because we'd like to not
touch INACTIVE events if at all possible, this makes event scheduling
(much) more expensive than needed.

Rewrite the timekeeping to directly use event->state, this greatly
simplifies the code and results in only having to update things when
we change state, or an up-to-date value is requested (read).
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

perf_event_read() has a number of issues regarding the timekeeping bits.

 - The IPI didn't update group times when it found INACTIVE

 - The direct call would not re-check ->state after taking ctx->lock
   which can result in ->count and timestamps getting out of sync.

And we can make use of the ordering introduced for perf_event_stop()
to make it more accurate for ACTIVE.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The barrier and comment make no sense:

 - if what the barrier says is true, it should be wmb() but that
   should then be part of the arch driver, not the generic code.

 - if it is an SMP barrier, there must be a matching barrier, and
   there isn't one.

So kill it.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Its a weird name, active is one of the states, it should not be part
of the name, also, its too long.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We should make sure to update ctx time before we use it to update
event times.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Event timestamps are serialized using ctx->lock, make sure to hold it
over reading all values.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We should make sure the ctx time is updated before we detach events;
which will want to update event times.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

perf_event_read_value() is an external accessor, just like
perf_event_{en,dis}able() and should thus use perf_event_ctx_lock().
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f63a8daa ("perf: Fix event->ctx locking")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

perf/bpf: Extend the perf_event_read_local() interface, a.k.a. "bpf: perf event change needed for subsequent bpf helpers"

eBPF programs would like access to the (perf) event enabled and
running times along with the event value, such that they can deal with
event multiplexing (among other things).

This patch extends the interface; a future eBPF patch will utilize
the new functionality.

[ Note, there's a same-content commit with a poor changelog and a meaningless
  title in the networking tree as well - but we need this change for subsequent
  perf work, so apply it here as well, with a proper changelog. Hopefully Git
  will be able to sort out this somewhat messy workflow, if there are no other,
  conflicting changes to these files. ]
Signed-off-by: NYonghong Song <yhs@fb.com>
[ Rewrote the changelog. ]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <ast@fb.com>
Cc: <daniel@iogearbox.net>
Cc: <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20171005161923.332790-2-yhs@fb.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo-4.15-20171025' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core inline improvements from Arnaldo Carvalho de Melo:

From Milian's cover letter: (Milian Wolff)

"This series of patches completely reworks the way inline frames are
 handled.  Instead of querying for the inline nodes on-demand in the
 individual tools, we now create proper callchain nodes for inlined
 frames. The advantages this approach brings are numerous:

 - Less duplicated code in the individual browser

 - Aggregated cost for inlined frames for the --children top-down list

 - Various bug fixes that arose from querying for a srcline/symbol based on
   the IP of a sample, which will always point to the last inlined frame
   instead of the corresponding non-inlined frame

 - Overall much better support for visualizing cost for heavily-inlined C++
   code, which simply was confusing and unreliably before

 - srcline honors the global setting as to whether full paths or basenames
   should be shown

 - Caches for inlined frames and srcline information, which allow us to
   enable inline frame handling by default"
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Now that we have caches in place to speed up the process of finding
inlined frames and srcline information repeatedly, we can enable this
useful option by default.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-6-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This also removes the symbol name from the srcline column, more on this
below.

This ensures we use the correct srcline, which could originate from a
potentially inlined function. The hist entries used to query for the
srcline based purely on the IP, which leads to wrong results for inlined
entries.

Before:

~~~~~
  perf report --inline -s srcline -g none --stdio
  ...
  # Children      Self  Source:Line
  # ........  ........  ..................................................................................................................................
  #
      94.23%     0.00%  __libc_start_main+18446603487898210537
      94.23%     0.00%  _start+41
      44.58%     0.00%  main+100
      44.58%     0.00%  std::_Norm_helper<true>::_S_do_it<double>+100
      44.58%     0.00%  std::__complex_abs+100
      44.58%     0.00%  std::abs<double>+100
      44.58%     0.00%  std::norm<double>+100
      36.01%     0.00%  hypot+18446603487892193300
      25.81%     0.00%  main+41
      25.81%     0.00%  std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+41
      25.81%     0.00%  std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+41
      25.75%    25.75%  random.h:143
      18.39%     0.00%  main+57
      18.39%     0.00%  std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+57
      18.39%     0.00%  std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+57
      13.80%    13.80%  random.tcc:3330
       5.64%     0.00%  ??:0
       4.13%     4.13%  __hypot_finite+163
       4.13%     0.00%  __hypot_finite+18446603487892193443
...
~~~~~

After:

~~~~~
  perf report --inline -s srcline -g none --stdio
  ...
  # Children      Self  Source:Line
  # ........  ........  ...........................................
  #
      94.30%     1.19%  main.cpp:39
      94.23%     0.00%  __libc_start_main+18446603487898210537
      94.23%     0.00%  _start+41
      48.44%     1.70%  random.h:1823
      48.44%     0.00%  random.h:1814
      46.74%     2.53%  random.h:185
      44.68%     0.10%  complex:589
      44.68%     0.00%  complex:597
      44.68%     0.00%  complex:654
      44.68%     0.00%  complex:664
      40.61%    13.80%  random.tcc:3330
      36.01%     0.00%  hypot+18446603487892193300
      26.81%     0.00%  random.h:151
      26.81%     0.00%  random.h:332
      25.75%    25.75%  random.h:143
       5.64%     0.00%  ??:0
       4.13%     4.13%  __hypot_finite+163
       4.13%     0.00%  __hypot_finite+18446603487892193443
...
~~~~~

Note that this change removes the symbol from the source:line hist
column. If this information is desired, users should explicitly query
for it if needed. I.e. run this command instead:

~~~~~
  perf report --inline -s sym,srcline -g none --stdio
  ...
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'cycles:uppp'
  # Event count (approx.): 1381229476
  #
  # Children      Self  Symbol                                                                                                                               Source:Line
  # ........  ........  ...................................................................................................................................  ...........................................
  #
      94.30%     1.19%  [.] main                                                                                                                             main.cpp:39
      94.23%     0.00%  [.] __libc_start_main                                                                                                                __libc_start_main+18446603487898210537
      94.23%     0.00%  [.] _start                                                                                                                           _start+41
      48.44%     0.00%  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)  random.h:1814
      48.44%     0.00%  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)  random.h:1823
      46.74%     0.00%  [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)  random.h:185
      44.68%     0.00%  [.] std::_Norm_helper<true>::_S_do_it<double> (inlined)                                                                              complex:654
      44.68%     0.00%  [.] std::__complex_abs (inlined)                                                                                                     complex:589
      44.68%     0.00%  [.] std::abs<double> (inlined)                                                                                                       complex:597
      44.68%     0.00%  [.] std::norm<double> (inlined)                                                                                                      complex:664
      39.80%    13.59%  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >               random.tcc:3330
      36.01%     0.00%  [.] hypot                                                                                                                            hypot+18446603487892193300
      26.81%     0.00%  [.] std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined)                                                        random.h:151
      26.81%     0.00%  [.] std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined)                                 random.h:332
      25.75%     0.00%  [.] std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined)                                     random.h:143
      25.19%    25.19%  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >               random.h:143
       4.13%     4.13%  [.] __hypot_finite                                                                                                                   __hypot_finite+163
       4.13%     0.00%  [.] __hypot_finite                                                                                                                   __hypot_finite+18446603487892193443
...
~~~~~

Compared to the old behavior, this reduces duplication in the output.
Before we used to print the symbol name in the srcline column even
when the sym column was explicitly requested. I.e. the output was:

~~~~~
  perf report --inline -s sym,srcline -g none --stdio
  ...
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'cycles:uppp'
  # Event count (approx.): 1381229476
  #
  # Children      Self  Symbol                                                                                                                               Source:Line
  # ........  ........  ...................................................................................................................................  ..................................................................................................................................
  #
      94.23%     0.00%  [.] __libc_start_main                                                                                                                __libc_start_main+18446603487898210537
      94.23%     0.00%  [.] _start                                                                                                                           _start+41
      44.58%     0.00%  [.] main                                                                                                                             main+100
      44.58%     0.00%  [.] std::_Norm_helper<true>::_S_do_it<double> (inlined)                                                                              std::_Norm_helper<true>::_S_do_it<double>+100
      44.58%     0.00%  [.] std::__complex_abs (inlined)                                                                                                     std::__complex_abs+100
      44.58%     0.00%  [.] std::abs<double> (inlined)                                                                                                       std::abs<double>+100
      44.58%     0.00%  [.] std::norm<double> (inlined)                                                                                                      std::norm<double>+100
      36.01%     0.00%  [.] hypot                                                                                                                            hypot+18446603487892193300
      25.81%     0.00%  [.] main                                                                                                                             main+41
      25.81%     0.00%  [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)  std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+41
      25.81%     0.00%  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)  std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+41
      25.69%    25.69%  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >               random.h:143
      18.39%     0.00%  [.] main                                                                                                                             main+57
      18.39%     0.00%  [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)  std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()+57
      18.39%     0.00%  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)  std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >+57
      13.80%    13.80%  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >               random.tcc:3330
       4.13%     4.13%  [.] __hypot_finite                                                                                                                   __hypot_finite+163
       4.13%     0.00%  [.] __hypot_finite                                                                                                                   __hypot_finite+18446603487892193443
...
~~~~~
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-5-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On one hand this ensures that the memory is properly freed when the DSO
gets freed. On the other hand this significantly speeds up the
processing of the callchain nodes when lots of srclines are requested.
For one of my data files e.g.:

Before:

 Performance counter stats for 'perf report -s srcline -g srcline --stdio':

      52496.495043      task-clock (msec)         #    0.999 CPUs utilized
               634      context-switches          #    0.012 K/sec
                 2      cpu-migrations            #    0.000 K/sec
           191,561      page-faults               #    0.004 M/sec
   165,074,498,235      cycles                    #    3.144 GHz
   334,170,832,408      instructions              #    2.02  insn per cycle
    90,220,029,745      branches                  # 1718.591 M/sec
       654,525,177      branch-misses             #    0.73% of all branches

      52.533273822 seconds time elapsedProcessed 236605 events and lost 40 chunks!

After:

 Performance counter stats for 'perf report -s srcline -g srcline --stdio':

      22606.323706      task-clock (msec)         #    1.000 CPUs utilized
                31      context-switches          #    0.001 K/sec
                 0      cpu-migrations            #    0.000 K/sec
           185,471      page-faults               #    0.008 M/sec
    71,188,113,681      cycles                    #    3.149 GHz
   133,204,943,083      instructions              #    1.87  insn per cycle
    34,886,384,979      branches                  # 1543.214 M/sec
       278,214,495      branch-misses             #    0.80% of all branches

      22.609857253 seconds time elapsed

Note that the difference is only this large when `--inline` is not
passed. In such situations, we would use the inliner cache and thus do
not run this code path that often.

I think that this cache should actually be used in other places, too.
When looking at the valgrind leak report for perf report, we see tons of
srclines being leaked, most notably from calls to
hist_entry__get_srcline. The problem is that get_srcline has many
different formatting options (show_sym, show_addr, potentially even
unwind_inlines when calling __get_srcline directly). As such, the
srcline cannot easily be cached for all calls, or we'd have to add
caches for all formatting combinations (6 so far). An alternative would
be to remove the formatting options and handle that on a different level
- i.e. print the sym/addr on demand wherever we actually output
something. And the unwind_inlines could be moved into a separate
function that does not return the srcline.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-4-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When no inlined frames could be found for a given address, we did not
store this information anywhere. That means we potentially do the costly
inliner lookup repeatedly for cases where we know it can never succeed.

This patch makes dso__parse_addr_inlines always return a valid
inline_node. It will be empty when no inliners are found. This enables
us to cache the empty list in the DSO, thereby improving the performance
when many addresses fail to find the inliners.

For my trivial example, the performance impact is already quite
significant:

Before:

~~~~~
 Performance counter stats for 'perf report --stdio --inline -g srcline -s srcline' (5 runs):

        594.804032      task-clock (msec)         #    0.998 CPUs utilized            ( +-  0.07% )
                53      context-switches          #    0.089 K/sec                    ( +-  4.09% )
                 0      cpu-migrations            #    0.000 K/sec                    ( +-100.00% )
             5,687      page-faults               #    0.010 M/sec                    ( +-  0.02% )
     2,300,918,213      cycles                    #    3.868 GHz                      ( +-  0.09% )
     4,395,839,080      instructions              #    1.91  insn per cycle           ( +-  0.00% )
       939,177,205      branches                  # 1578.969 M/sec                    ( +-  0.00% )
        11,824,633      branch-misses             #    1.26% of all branches          ( +-  0.10% )

       0.596246531 seconds time elapsed                                          ( +-  0.07% )
~~~~~

After:

~~~~~
 Performance counter stats for 'perf report --stdio --inline -g srcline -s srcline' (5 runs):

        113.111405      task-clock (msec)         #    0.990 CPUs utilized            ( +-  0.89% )
                29      context-switches          #    0.255 K/sec                    ( +- 54.25% )
                 0      cpu-migrations            #    0.000 K/sec
             5,380      page-faults               #    0.048 M/sec                    ( +-  0.01% )
       432,378,779      cycles                    #    3.823 GHz                      ( +-  0.75% )
       670,057,633      instructions              #    1.55  insn per cycle           ( +-  0.01% )
       141,001,247      branches                  # 1246.570 M/sec                    ( +-  0.01% )
         2,346,845      branch-misses             #    1.66% of all branches          ( +-  0.19% )

       0.114222393 seconds time elapsed                                          ( +-  1.19% )
~~~~~
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-3-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some of the code paths I introduced before returned too early without
running the code to handle a node's branch count.  By refactoring
match_chain to only have one exit point, this can be remedied.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1707691.qaJ269GSZW@agathebauer
Link: http://lkml.kernel.org/r/20171018185350.14893-2-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Similar to the callstack frame matching, we also have to compare the
symbol name when sorting hist entries. The reason is twofold: On one
hand, multiple inlined functions will use the same symbol start/end
values of the parent, non-inlined symbol.

As such, all of these symbols often end up missing from top-level
report, as they get merged with the non-inlined frame. On the other
hand, multiple different functions may end up inlining the same
function, and we need to aggregate these values properly.

Before:

~~~~~
  perf report --stdio --inline -g none
  # Children     Self  Command       Shared Object Symbol
  # ........ ........  ............  ............. ...................................
  #
     100.00%   39.69%  cpp-inlining  cpp-inlining  [.] main
     100.00%    0.00%  cpp-inlining  cpp-inlining  [.] _start
     100.00%    0.00%  cpp-inlining  libc-2.25.so  [.] __libc_start_main
      97.03%    0.00%  cpp-inlining  cpp-inlining  [.] std::norm<double> (inlined)
      59.53%    4.26%  cpp-inlining  libm-2.25.so  [.] hypot
      55.21%   55.08%  cpp-inlining  libm-2.25.so  [.] __hypot_finite
       0.52%    0.52%  cpp-inlining  libm-2.25.so  [.] cabs
~~~~~

After:

~~~~~
  perf report --stdio --inline -g none
  # Children     Self  Command       Shared Object Symbol
  # ........ ........  ............  ............. ...................................................................................................................................
  #
     100.00%   39.69%  cpp-inlining  cpp-inlining  [.] main
     100.00%    0.00%  cpp-inlining  cpp-inlining  [.] _start
     100.00%    0.00%  cpp-inlining  libc-2.25.so  [.] __libc_start_main
      62.57%    0.00%  cpp-inlining  cpp-inlining  [.] std::_Norm_helper<true>::_S_do_it<double> (inlined)
      62.57%    0.00%  cpp-inlining  cpp-inlining  [.] std::__complex_abs (inlined)
      62.57%    0.00%  cpp-inlining  cpp-inlining  [.] std::abs<double> (inlined)
      62.57%    0.00%  cpp-inlining  cpp-inlining  [.] std::norm<double> (inlined)
      59.53%    4.26%  cpp-inlining  libm-2.25.so  [.] hypot
      55.21%   55.08%  cpp-inlining  libm-2.25.so  [.] __hypot_finite
      34.46%    0.00%  cpp-inlining  cpp-inlining  [.] std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
      32.39%    0.00%  cpp-inlining  cpp-inlining  [.] std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)
      32.39%    0.00%  cpp-inlining  cpp-inlining  [.] std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
      12.29%    0.00%  cpp-inlining  cpp-inlining  [.] std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined)
      12.29%    0.00%  cpp-inlining  cpp-inlining  [.] std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined)
      12.29%    0.00%  cpp-inlining  cpp-inlining  [.] std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined)
       0.52%    0.52%  cpp-inlining  libm-2.25.so  [.] cabs
~~~~~
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-11-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The fake symbols we create for inlined frames will represent different
functions but can use the symbol start address. This leads to issues
when different inline branches all lead to the same function.

Before:
~~~~~
$ perf report -s sym -i perf.inlining.data --inline --stdio -g function
...
             --38.86%--_start
                       __libc_start_main
                       main
                       |
                        --37.57%--std::norm<double> (inlined)
                                  std::_Norm_helper<true>::_S_do_it<double> (inlined)
                                  |
                                   --36.36%--std::abs<double> (inlined)
                                             std::__complex_abs (inlined)
                                             |
                                              --12.24%--std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined)
                                                        std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined)
                                                        std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined)
~~~~~

Note that this backtrace representation is completely bogus.
Complex abs does not call the linear congruential engine! It
is just a side-effect of a longer inlined stack being appended
to a shorter, different inlined stack, both of which originate
in the same function (main).

This patch fixes the issue:

~~~~~
$ perf report -s sym -i perf.inlining.data --inline --stdio -g function
...
             --38.86%--_start
                       __libc_start_main
                       main
                       |
                       |--35.59%--std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
                       |          std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
                       |          |
                       |           --34.37%--std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() (inlined)
                       |                     std::generate_canonical<double, 53ul, std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > (inlined)
                       |                     |
                       |                      --12.24%--std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>::operator() (inlined)
                       |                                std::__detail::__mod<unsigned long, 2147483647ul, 16807ul, 0ul> (inlined)
                       |                                std::__detail::_Mod<unsigned long, 2147483647ul, 16807ul, 0ul, true, true>::__calc (inlined)
                       |
                        --1.99%--std::norm<double> (inlined)
                                  std::_Norm_helper<true>::_S_do_it<double> (inlined)
                                  std::abs<double> (inlined)
                                  std::__complex_abs (inlined)
~~~~~
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-10-milian.wolff@kdab.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
[ Fix up conflict with c1fbc0cf ("perf callchain: Compare dsos (as well) for CCKEY_FUNCTION"), remove unneeded hunk ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of showing the (repeated) DSO name of the non-inlined frame, we
now show the "(inlined)" suffix instead.

Before:
                   214f7 __hypot_finite (/usr/lib/libm-2.25.so)
                    ace3 hypot (/usr/lib/libm-2.25.so)
                     a4a std::__complex_abs (/home/milian/projects/src/perf-tests/inlining)
                     a4a std::abs<double> (/home/milian/projects/src/perf-tests/inlining)
                     a4a std::_Norm_helper<true>::_S_do_it<double> (/home/milian/projects/src/perf-tests/inlining)
                     a4a std::norm<double> (/home/milian/projects/src/perf-tests/inlining)
                     a4a main (/home/milian/projects/src/perf-tests/inlining)
                   20510 __libc_start_main (/usr/lib/libc-2.25.so)
                     bd9 _start (/home/milian/projects/src/perf-tests/inlining)

After:
                   214f7 __hypot_finite (/usr/lib/libm-2.25.so)
                    ace3 hypot (/usr/lib/libm-2.25.so)
                     a4a std::__complex_abs (inlined)
                     a4a std::abs<double> (inlined)
                     a4a std::_Norm_helper<true>::_S_do_it<double> (inlined)
                     a4a std::norm<double> (inlined)
                     a4a main (/home/milian/projects/src/perf-tests/inlining)
                   20510 __libc_start_main (/usr/lib/libc-2.25.so)
                     bd9 _start (/home/milian/projects/src/perf-tests/inlining)
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-9-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The original patch that introduced inline frame output in the various
browsers used this suffix already. The new centralized approach that
uses fake symbols for inlined frames was missing this approach so far.

Instead of changing the symbol name itself, we only print the suffix
where needed. This allows us to efficiently lookup the symbol for a
given name without first having to append the suffix before the lookup.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-8-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When a callchain entry has no srcline available, we ended up comparing
the instruction pointer. I consider this to be not too useful. Rather, I
think we should group the entries by function name, which this patch
adds. For people who want to split the data on the IP boundary, using
`-g address` is the correct choice.

Before:

~~~~~
   100.00%    38.86%  [.] main
            |
            |--61.14%--main inlining.cpp:14
            |          std::norm<double> complex:664
            |          std::_Norm_helper<true>::_S_do_it<double> complex:654
            |          std::abs<double> complex:597
            |          std::__complex_abs complex:589
            |          |
            |          |--56.03%--hypot
            |          |          |
            |          |          |--8.45%--__hypot_finite
            |          |          |
            |          |          |--7.62%--__hypot_finite
            |          |          |
            |          |          |--2.29%--__hypot_finite
            |          |          |
            |          |          |--2.24%--__hypot_finite
            |          |          |
            |          |          |--2.06%--__hypot_finite
            |          |          |
            |          |          |--1.81%--__hypot_finite
...
~~~~~

After:

~~~~~
   100.00%    38.86%  [.] main
            |
            |--61.14%--main inlining.cpp:14
            |          std::norm<double> complex:664
            |          std::_Norm_helper<true>::_S_do_it<double> complex:654
            |          std::abs<double> complex:597
            |          std::__complex_abs complex:589
            |          |
            |          |--60.29%--hypot
            |          |          |
            |          |           --56.03%--__hypot_finite
            |          |
            |           --0.85%--cabs
~~~~~
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-7-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The inline_node structs are maintained by the new dso->inlines tree.
This in turn keeps ownership of the fake symbols and srcline string
representing an inline frame.

This tree is sorted by address to allow quick lookups. All other entries
of the symbol beside the function name are unused for inline frames. The
advantage of this approach is that all existing users of the callchain
API can now transparently display inlined frames without having to patch
their code.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-6-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is a preparation for the creation of real callchain entries for
inlined frames. The rest of the perf code uses the srcline string. As
such, using that also for the srcline API allows us to simplify some of
the upcoming code. Most notably, it will allow us to cache the srcline
for a given inline node and reuse it for different callchain entries.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-5-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is a requirement to create real callchain entries for inlined
frames.

Since the list of inlines usually contains the target symbol too, i.e.
the location where the frames get inlined to, we alias that symbol and
reuse it as-is is. This ensures that other dependent functionality keeps
working, most notably annotation of the target frames.

For all other entries in the inline_list, a fake symbol is created.
These are marked by new 'inlined' member which is set to true. Only
those symbols are managed by the inline_list and get freed when the
inline_list is deleted from within inline_node__delete.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-4-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is mostly a preparation to enable the creation of full callchain
nodes for inline frames. Such frames will reference the IP of the
non-inlined frame, but hold the symbol and srcline for an inlined
location. As such, we won't be able to query the srcline on-demand based
on the IP alone. Instead, we will leverage the functionality provided by
this patch here, and store the srcline for the inlined nodes in the new
srcline member of callchain_cursor_node.

Note that this patch on its own leaks the srcline, as there is no
free_callchain_cursor_node or similar. A future patch will add caching
of the srcline and handle deletion properly.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-3-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The follow-up commits will make inline frames first-class citizens in
the callchain, thereby obsoleting all of this special code.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-2-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit:

  d2878d64 ("perf/x86/intel/bts: Disallow use by unprivileged users on paranoid systems")

... adds a privilege check in the exactly wrong place in the event init path:
after the 'LBR exclusive' reference has been taken, and doesn't release it
in the case of insufficient privileges. After this, nobody in the system
gets to use PT or LBR afterwards.

This patch moves the privilege check to where it should have been in the
first place.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d2878d64 ("perf/x86/intel/bts: Disallow use by unprivileged users on paranoid systems")
Link: http://lkml.kernel.org/r/20171023123533.16973-1-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo-4.15-20171023' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 - Update vendor events JSON metrics for Intel's Broadwell, Broadwell
   Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown, Sandy
   Bridge, Skylake and SkyLake Server (Andi Kleen)

 - Add vendor event file for Intel's Goldmont Plus V1 (Kan Liang)

 - Move perf_mmap methods from 'perf record' and evlist.c to a separate
   mmap.[ch] pair, to better separate things and pave the way for further
   work on multithreading tools (Arnaldo Carvalho de Melo)

 - Do not check ABI headers in a detached tarball build, as it the kernel
   headers from where we copied tools/include/ are by definition not
   available (Arnaldo Carvalho de Melo)

 - Make 'perf script' use fprintf() like printing, i.e. receiving a FILE
   pointer so that it gets consistent with other tools/ code and allows
   for printing to per-event files (Arnaldo Carvalho de Melo)

 - Error handling fixes (resource release on exit) for 'perf script'
   and 'perf kmem' (Christophe JAILLET)

 - Make some 'perf event attr' tests optional on virtual machines, where
   tested counters are not available (Jiri Olsa)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Add a Intel event file for perf.
Signed-off-by: NKan Liang <Kan.liang@intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1508331907-395162-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We don't need perf.h, that is a kitchen sink, all we need is
perf_events.h for perf_ns_link_info, sys/types.h for pid_t and
linux/types.h for u64, list_head.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f2uxyaj4s2hmntkrezpa6dqz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If the string passed in '--time' is invalid, we must do some cleanup
before leaving. As in the other error handling paths of this function.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Fixes: 2a865bd8 ("perf kmem: Add option to specify time window of interest")
Link: http://lkml.kernel.org/r/20170916060936.28199-1-christophe.jaillet@wanadoo.frSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If the string passed in '--time' is invalid, or if failed to set
libtraceevent function resolver, we must do some cleanup before leaving.
As in the other error handling paths of this function.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170916062537.28921-1-christophe.jaillet@wanadoo.frSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We've been mixing print() with fprintf() style printing for a while, but
now we need to use fprintf() like syntax uniformly as a preparatory
patch for supporting printing to different files, one per event.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lkml.kernel.org/n/tip-kv5z3v8ptfghbarv3a9usvin@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Out of print_binary() but receiving a fp pointer and expecting that the
printer be a fprintf like function, i.e. receive a FILE pointer and
return the number of characters printed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lkml.kernel.org/n/tip-6oqnxr6lmgqe6q6p3iugnscx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some of the metrics use an incorrect syntax for specifying the cmask for
an event. Convert to perf syntax so that they can be resolved.

Fixes metrics on Broadwell, SandyBridge.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-3k3fkfj8obek9dkmryyrqzhu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When we use one of:

  [acme@jouet linux]$ make help | grep perf
    perf-tar-src-pkg    - Build perf-4.14.0-rc3.tar source tarball
    perf-targz-src-pkg  - Build perf-4.14.0-rc3.tar.gz source tarball
    perf-tarbz2-src-pkg - Build perf-4.14.0-rc3.tar.bz2 source tarball
    perf-tarxz-src-pkg  - Build perf-4.14.0-rc3.tar.xz source tarball
  [acme@jouet linux]$

I.e. when we create a detached tarball to build perf outside outside the
enveloping kernel sources (from a kernel tarball or a checked out
linux.git directory) we by definition can't check for differences among
the tools/{include,arch}, etc files we originally copied from the
kernel, so bail out in that case, to avoid warnings when doing the
detached builds.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vbrga0mhplv7niwxr3ghjyxv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull x86 platform driver fixes from Darren Hart:
 "Use a spin_lock instead of mutex in atomic context. The devm_ fix is a
  dependency. Summary:

  intel_pmc_ipc:
   - Use spin_lock to protect GCR updates
   - Use devm_* calls in driver probe function"

* tag 'platform-drivers-x86-v4.14-3' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: intel_pmc_ipc: Use spin_lock to protect GCR updates
  platform/x86: intel_pmc_ipc: Use devm_* calls in driver probe function

Currently, update_no_reboot_bit() function implemented in this driver
uses mutex_lock() to protect its register updates. But this function is
called with in atomic context in iTCO_wdt_start() and iTCO_wdt_stop()
functions in iTCO_wdt.c driver, which in turn causes "sleeping into
atomic context" issue. This patch fixes this issue by replacing the
mutex_lock() with spin_lock() to protect the GCR read/write/update APIs.

Fixes: 9d855d46 ("platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure")
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kupuswamy@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>