- 05 10月, 2010 3 次提交
-
-
由 Ben Skeggs 提交于
On certain boards, there's BIOS scripts and memory timings that need to be modified with the memclk. Just pass in the entire perflvl struct and let the chipset-specific code decide what to do. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reported-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
This isn't correct everywhere yet, but since we don't use the data yet it's perfectly safe to push in, and the information we gain from logs will help to fix the remaining issues. v2 (Ben Skeggs <bskeggs@redhat.com>): - fixed up formatting - free parsed timing info on takedown - switched timing table printout to debug loglevel Signed-off-by: NRoy Spliet <r.spliet@student.tudelft.nl> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 24 9月, 2010 37 次提交
-
-
由 Ben Skeggs 提交于
Just in case someone, somewhere, does something difficult. This also removes one path that was different between fermi and non-fermi. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francesco Marella 提交于
Signed-off-by: NFrancesco Marella <fmarl@paranoici.org> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant entries. This nukes the mode id initialised by drm_mode_create(), and causes warnings from idr when we try to remove the mode. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Somehow fixes some corruption seen in KDE.. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Very useful for debugging buffer migration issues. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Martin Peres 提交于
Signed-off-by: NMartin Peres <martin.peres@ensi-bourges.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Fixes DP output on a GTX 465 board I have. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Used on nv17-nv28, they contain memory clocks and timings, only one of the table entries can actually be used, depending on the RAMCFG straps, and it's usually higher than the frequency programmed on boot by the BIOS. The memory timings listed in table version 0x1x are used to init the 0x12xx range but they aren't required for reclocking to work. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Should fix issues noticed on NVAC (MacBook Pro / ION) since gpuobj rework. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Found on NV3x boards, this should allow voltage modifications to work on these chipsets. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reported-by: NRoy Spliet <r.spliet@student.tudelft.nl> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Phil Turmel 提交于
Build breakage: drivers/built-in.o: In function `nouveau_acpi_edid': (.text+0x13404e): undefined reference to `acpi_video_get_edid' make: *** [.tmp_vmlinux1] Error 1 Introduced by: a6ed76d7 is the first bad commit commit a6ed76d7 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Jul 12 15:33:07 2010 +1000 drm/nouveau: support fetching LVDS EDID from ACPI Based on a patch from Matthew Garrett. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Acked-by: NMatthew Garrett <mjg@redhat.com> It doesn't seem to revert cleanly, but the problem lies in these two config entries: CONFIG_ACPI=y CONFIG_ACPI_VIDEO=m Adding a select for ACPI_VIDEO appears to be the best solution, and is comparable to what is done in DRM_I915. Builds, boots, and appears to work correctly. Signed-off-by: NPhilip J. Turmel <philip@turmel.org> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Guarded by a module parameter for the moment, read the code for the magic value which enables it. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Currently just hooked up to the already-existing nouveau_hw, which should handle all relevant chipsets as well as we currently can. This will likely be eventually split out and improved into chipset specific code at a later point. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This will make nouveau_pm attempt to report the card's current performance level both during bootup, and through sysfs. This is a very initial implementation, and can be improved a *lot* Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This replaces all the pll_types definitions for ones that match the types used in the tables in recent VBIOS versions. get_pll_limits() will now accept either type or register value as input across all limits table versions, and will store the actual register ID that a PLL type refers to in the returned structure. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
The rest of the connector code assumes we can kfree() the EDID pointer. This causes things to blow up with the ACPI EDID pointer we get passed. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
The most important part of this change is that we now instruct PFIFO to drop all pending fetches, rather than attempting to skip a single dword and hope that things would magically sort themselves out - they usually don't, and we end up with PFIFO being completely hung. This commit also adds somewhat more useful logging when these exceptions occur. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
More Apple brain damage, it fixes the modesetting failure on an eMac G4 (fdo bug 29810). Reported-by: NZoltan Varnagy <doi@freemail.hu> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-