1. 22 9月, 2010 1 次提交
  2. 20 9月, 2010 5 次提交
  3. 19 9月, 2010 10 次提交
    • A
      alpha: deal with multiple simultaneously pending signals · 494486a1
      Al Viro 提交于
      Unlike the other targets, alpha sets _one_ sigframe and
      buggers off until the next syscall/interrupt, even if
      more signals are pending.  It leads to quite a few unpleasant
      inconsistencies, starting with SIGSEGV potentially arriving
      not where it should and including e.g. mess with sigsuspend();
      consider two pending signals blocked until sigsuspend()
      unblocks them.  We pick the first one; then, if we are hit
      by interrupt while in the handler, we process the second one
      as well.  If we are not, and if no syscalls had been made,
      we get out of the first handler and leave the second signal
      pending; normally sigreturn() would've picked it anyway, but
      here it starts with restoring the original mask and voila -
      the second signal is blocked again.  On everything else we
      get both delivered consistently.
      
      It's actually easy to fix; the only thing to watch out for
      is prevention of double syscall restart.  Fortunately, the
      idea I've nicked from arm fix by rmk works just fine...
      
      Testcase demonstrating the behaviour in question; on alpha
      we get one or both flags set (usually one), on everything
      else both are always set.
      	#include <signal.h>
      	#include <stdio.h>
      	int had1, had2;
      	void f1(int sig) { had1 = 1; }
      	void f2(int sig) { had2 = 1; }
      	main()
      	{
      		sigset_t set1, set2;
      		sigemptyset(&set1);
      		sigemptyset(&set2);
      		sigaddset(&set2, 1);
      		sigaddset(&set2, 2);
      		signal(1, f1);
      		signal(2, f2);
      		sigprocmask(SIG_SETMASK, &set2, NULL);
      		raise(1);
      		raise(2);
      		sigsuspend(&set1);
      		printf("had1:%d had2:%d\n", had1, had2);
      	}
      Tested-by: NMichael Cree <mcree@orcon.net.nz>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      494486a1
    • A
      alpha: fix a 14 years old bug in sigreturn tracing · 53293638
      Al Viro 提交于
      The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL,
      all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support.
      
      What happens is direct return to ret_from_syscall, in order to bypass
      mangling of a3 (error indicator) and prevent other mutilations of
      registers (e.g. by syscall restart).  That's fine, but... the entire
      TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall
      stopping/notifying the tracer is after the syscall.  And the normal
      path we are forcibly switching to doesn't have it.
      
      So we end up with *one* stop in traced sigreturn() vs. two in other
      syscalls.  And yes, strace is visibly broken by that; try to strace
      the following
      	#include <signal.h>
      	#include <stdio.h>
      	void f(int sig) {}
      	main()
      	{
      		signal(SIGHUP, f);
      		raise(SIGHUP);
      		write(1, "eeeek\n", 6);
      	}
      and watch the show.  The
      	close(1)                                = 405
      in the end of strace output is coming from return value of write() (6 ==
      __NR_close on alpha) and syscall number of exit_group() (__NR_exit_group ==
      405 there).
      
      The fix is fairly simple - the only thing we end up missing is the call
      of syscall_trace() and we can tell whether we'd been called from the
      SYSCALL_TRACE path by checking ra value.  Since we are setting the
      switch_stack up (that's what sys_sigreturn() does), we have the right
      environment for calling syscall_trace() - just before we call
      undo_switch_stack() and return.  Since undo_switch_stack() will overwrite
      s0 anyway, we can use it to store the result of "has it been called from
      SYSCALL_TRACE path?" check.  The same thing applies in rt_sigreturn().
      Tested-by: NMichael Cree <mcree@orcon.net.nz>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      53293638
    • A
      alpha: unb0rk sigsuspend() and rt_sigsuspend() · 392fb6e3
      Al Viro 提交于
      Old code used to set regs->r0 and regs->r19 to force the right
      return value.  Leaving that after switch to ERESTARTNOHAND
      was a Bad Idea(tm), since now that screws the restart - if we
      hit the case when get_signal_to_deliver() returns 0, we will
      step back to syscall insn, with v0 set to EINTR and a3 to 1.
      The latter won't matter, since EINTR is 4, aka __NR_write.
      
      Testcase:
      
      	#include <signal.h>
      	#define _GNU_SOURCE
      	#include <unistd.h>
      	#include <sys/syscall.h>
      
      	main()
      	{
      		sigset_t mask;
      		sigemptyset(&mask);
      		sigaddset(&mask, SIGCONT);
      		sigprocmask(SIG_SETMASK, &mask, NULL);
      		kill(0, SIGCONT);
      		syscall(__NR_sigsuspend, 1, "b0rken\n", 7);
      	}
      
      results on alpha in immediate message to stdout...
      
      Fix is obvious; moreover, since we don't need regs anymore, we can
      switch to normal prototypes for these guys and lose the wrappers.
      Even better, rt_sigsuspend() is identical to generic version in
      kernel/signal.c now.
      Tested-by: NMichael Cree <mcree@orcon.net.nz>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      392fb6e3
    • A
      alpha: belated ERESTART_RESTARTBLOCK race fix · 2deba1bd
      Al Viro 提交于
      same thing as had been done on other targets back in 2003 -
      move setting ->restart_block.fn into {rt_,}sigreturn().
      Tested-by: NMichael Cree <mcree@orcon.net.nz>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      2deba1bd
    • M
      alpha: Shift perf event pending work earlier in timer interrupt · bdc8b891
      Michael Cree 提交于
      Pending work from the performance event subsystem is executed in
      the timer interrupt.  This patch shifts the call to
      perf_event_do_pending() before the call to update_process_times()
      as the latter may call back into the perf event subsystem and it
      is prudent to have the pending work executed first.
      Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      bdc8b891
    • M
      alpha: wire up fanotify and prlimit64 syscalls · 531f0474
      Mikael Pettersson 提交于
      The 2.6.36-rc kernel added three new system calls:
      fanotify_init, fanotify_mark, and prlimit64.  This
      patch wires them up on Alpha.
      
      Built and booted on an XP900.  Untested beyond that.
      Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      531f0474
    • A
      alpha: kill big kernel lock · 12e750d9
      Arnd Bergmann 提交于
      All uses of the BKL on alpha are totally bogus, nothing
      is really protected by this. Remove the remaining users
      so we don't have to mark alpha as 'depends on BKL'.
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Cc: Richard Henderson <rth@twiddle.net>
      Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
      Cc: linux-alpha@vger.kernel.org
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      12e750d9
    • T
      alpha: fix build breakage in asm/cacheflush.h · b97f897d
      Tejun Heo 提交于
      Alpha SMP flush_icache_user_range() is implemented as an inline
      function inside include/asm/cacheflush.h.  It dereferences @current
      but doesn't include linux/sched.h and thus causes build failure if
      linux/sched.h wasn't included previously.  Fix it by including the
      needed header file explicitly.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: NMatt Turner <mattst88@gmail.com>
      b97f897d
    • M
    • J
      31019075
  4. 18 9月, 2010 12 次提交
  5. 17 9月, 2010 12 次提交