Isolate the logic of IDTE vs. IPTE flushing of ptes in two functions,
ptep_flush_lazy and __tlb_flush_mm_lazy.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Always use the S390_lowcore.clock_comparator field to revalidate
the clock comparator CPU register after a machine check. This avoids
an unnecssary external interrupt after a machine check if no timer
is pending.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Change wording for the cpu capabiity changed message:
If such an event occurs it only means that a cpu capability *may* have
changed. A cpu capability change event may also occur for other reasons.

Also change the severity of the message from warning to informational.

If such an event happens user space should into /proc/sysinfo and verify
if some capability values changed, if that is of interest.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

ptep_modify_prot_start uses the pgste_set helper to store the pgste,
while ptep_modify_prot_commit uses its own pointer magic to retrieve
the value again. Add the pgste_get help function to keep things
symmetrical and improve readability.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

On process exit there is no more need for the pgste information.
Skip the expensive storage key operations which should speed up
termination of KVM processes.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Improve the encoding of the different pte types and the naming of the
page, segment table and region table bits. Due to the different pte
encoding the hugetlbfs primitives need to be adapted as well. To improve
compatability with common code make the huge ptes use the encoding of
normal ptes. The conversion between the pte and pmd encoding for a huge
pte is done with set_huge_pte_at and huge_ptep_get.
Overall the code is now easier to understand.
Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

With the introduction of PCI it became apparent that s390 should
convert to generic hardirqs as too many drivers do not have the
correct dependency for GENERIC_HARDIRQS. On the architecture
level s390 does not have irq lines. It has external interrupts,
I/O interrupts and adapter interrupts. This patch hard-codes all
external interrupts as irq #1, all I/O interrupts as irq #2 and
all adapter interrupts as irq #3. The additional information from
the lowcore associated with the interrupt is stored in the
pt_regs of the interrupt frame, where the interrupt handler can
pick it up. For PCI/MSI interrupts the adapter interrupt handler
scans the relevant bit fields and calls generic_handle_irq with
the virtual irq number for the MSI interrupt.
Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Make use of the adapter interrupt helpers in the PCI code. This is
the first step to convert the MSI interrupt code to PCI domains.
The patch removes the limitation of 64 adapter interrupts per
PCI function.
Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Rename s390pci_xyz to zpci_xxz and set_irq_ctrl to zpci_set_irq_ctrl.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The PCI code is the first user of adapter interrupts vectors.
Add a set of helpers to airq.c to separate the adatper interrupt
code from the PCI bits. The helpers allow for adapter interrupt
vectors of any size.
Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Just a small update to the wording of the messages, to bring them
more in line with our other messages.
Signed-off-by: NStefan Weinhuber <wein@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Replace the last two strict_strtoul() with kstrtoul().
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In the previous commit, Richard Genoud fixed proc_root_readdir(), which
had lost the check for whether all of the non-process /proc entries had
been returned or not.

But that in turn exposed _another_ bug, namely that the original readdir
conversion patch had yet another problem: it had lost the return value
of proc_readdir_de(), so now checking whether it had completed
successfully or not didn't actually work right anyway.

This reinstates the non-zero return for the "end of base entries" that
had also gotten lost in commit f0c3b509 ("[readdir] convert
procfs").  So now you get all the base entries *and* you get all the
process entries, regardless of getdents buffer size.

(Side note: the Linux "getdents" manual page actually has a nice example
application for testing getdents, which can be easily modified to use
different buffers.  Who knew? Man-pages can be useful)
Reported-by: NEmmanuel Benisty <benisty.e@gmail.com>
Reported-by: NMarc Dionne <marc.c.dionne@gmail.com>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f0c3b509 ("[readdir] convert procfs") introduced a bug on the
listing of the proc file-system.  The return value of proc_readdir()
isn't tested anymore in the proc_root_readdir function.

This lead to an "interesting" behaviour when we are using the getdents()
system call with a buffer too small: instead of failing, it returns the
first entries of /proc (enough to fill the given buffer), plus the PID
directories.

This is not triggered on glibc (as getdents is called with a 32KB
buffer), but on uclibc, the buffer size is only 1KB, thus some proc
entries are missing.

See https://lkml.org/lkml/2013/8/12/288 for more background.
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull gfs2 fixes from Steven Whitehouse:
 "Out of these five patches, the one for ensuring that the number of
  revokes is not exceeded, and the one for checking the glock is not
  already held in gfs2_getxattr are the two most important.  The latter
  can be triggered by selinux.

  The other three patches are very small and fix mostly fairly trivial
  issues"

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Check for glock already held in gfs2_getxattr
  GFS2: alloc_workqueue() doesn't return an ERR_PTR
  GFS2: don't overrun reserved revokes
  GFS2: WQ_NON_REENTRANT is meaningless and going away
  GFS2: Fix typo in gfs2_create_inode()

Pull x86 fixes from Ingo Molnar:
 "Two AMD microcode loader fixes and an OLPC firmware support fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Fix early microcode loading
  x86, microcode, AMD: Make cpu_has_amd_erratum() use the correct struct cpuinfo_x86
  x86: Don't clear olpc_ofw_header when sentinel is detected

Pull timer fixes from Ingo Molnar:
 "Three small fixlets"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: fix compile warning in tick_nohz_init()
  nohz: Do not warn about unstable tsc unless user uses nohz_full
  sched_clock: Fix integer overflow

Pull drm fixes from Dave Airlie:
 "Bit late with these, was under the weather for a a few days, nothing
  too crazy:

  Some radeon regression fixes, one intel regression fix, and one fix to
  avoid a warn with i915 when used with dma-buf"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: unpin backing storage in dmabuf_unmap
  drm/radeon: fix WREG32_OR macro setting bits in a register
  drm/radeon/r7xx: fix copy paste typo in golden register setup
  drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code
  drm/radeon: fix UVD message buffer validation

Fix new kernel-doc warnings in kernel/wait.c:

  Warning(kernel/wait.c:374): No description found for parameter 'p'
  Warning(kernel/wait.c:374): Excess function parameter 'word' description in 'wake_up_atomic_t'
  Warning(kernel/wait.c:374): Excess function parameter 'bit' description in 'wake_up_atomic_t'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the introduction of atomic_open, gfs2_getxattr can be
called with the glock already held, so we need to allow for
this.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Reported-by: NDavid Teigland <teigland@redhat.com>
Tested-by: NDavid Teigland <teigland@redhat.com>

alloc_workqueue() returns a NULL on error, it doesn't return an ERR_PTR.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When run during fsync, a gfs2_log_flush could happen between the
time when gfs2_ail_flush checked the number of blocks to revoke,
and when it actually started the transaction to do those revokes.
This occassionally caused it to need more revokes than it reserved,
causing gfs2 to crash.

Instead of just reserving enough revokes to handle the blocks that
currently need them, this patch makes gfs2_ail_flush reserve the
maximum number of revokes it can, without increasing the total number
of reserved log blocks. This patch also passes the number of reserved
revokes to __gfs2_ail_flush() so that it doesn't go over its limit
and cause a crash like we're seeing. Non-fsync calls to __gfs2_ail_flush
will still cause a BUG() necessary revokes are skipped.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

dbf2576e ("workqueue: make all workqueues non-reentrant") made
WQ_NON_REENTRANT no-op and the flag is going away.  Remove its usages.

This patch doesn't introduce any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com

PTR_RET should be PTR_ERR
Reported-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

* tag 'drm-intel-fixes-2013-08-15' of git://people.freedesktop.org/~danvet/drm-intel: (153 commits)
  drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code

This fixes a WARN in i915_gem_free_object when the
obj->pages_pin_count isn't 0.

v2: Add locking to unmap, noticed by Chris Wilson. Note that even
though we call unmap with our own dev->struct_mutex held that won't
result in an immediate deadlock since we never go through the dma_buf
interfaces for our own, reimported buffers. But it's still easy to
blow up and anger lockdep, but that's already the case with our ->map
implementation. Fixing this for real will involve per dma-buf ww mutex
locking by the callers. And lots of fun. So go with the duct-tape
approach for now.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Armin K. <krejzi@email.com> (v1)
Tested-by: NDave Airlie <airlied@redhat.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Just two small fixes for radeon.  One fixes an array overrun
that can cause garbage to get written to registers on some r7xx boards,
the other is a small UVD fix.
Also one audio regresion

* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix WREG32_OR macro setting bits in a register
  drm/radeon/r7xx: fix copy paste typo in golden register setup
  drm/radeon: fix UVD message buffer validation

Pull cgroup fix from Tejun Heo:
 "This contains one patch to fix the return value of cpuset's cgroups
  interface function, which used to always return -ENODEV for the writes
  on the 'memory_pressure_enabled' file"

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: fix the return value of cpuset_write_u64()

Pull jbd2 bug fixes from Ted Ts'o:
 "Two jbd2 bug fixes, one of which is a regression fix"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: Fix oops in jbd2_journal_file_inode()
  jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()

Fix this build error:

  In file included from fs/exec.c:61:0:
  arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned'
  arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default]
  arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu':
  arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end'

Broken due to commit 2b047252 ("Fix TLB gather virtual address range
invalidation corner cases").

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
[ Oh well. We had build testing for ppc amd um, but no s390  - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I have taken a different job.  I am removing myself as maintainer of
GRU.  Dimitri will continue to maintain the SGI GRU driver, changing the
XP/XPC/XPNET maintainer to Cliff Whickman, but leaving behind my
personal email address to answer any questions about the design or
operation of the XP family of drivers.
Signed-off-by: NRobin Holt <holt@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0713ed0c added
jbd2_journal_file_inode() call into ext4_block_zero_page_range().
However that function gets called from truncate path and thus inode
needn't have jinode attached - that happens in ext4_file_open() but
the file needn't be ever open since mount. Calling
jbd2_journal_file_inode() without jinode attached results in the oops.

We fix the problem by attaching jinode to inode also in ext4_truncate()
and ext4_punch_hole() when we are going to zero out partial blocks.
Reported-by: Nmajianpeng <majianpeng@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Pull ARM fixes from Russell King:
 "The usual collection of random fixes.  Also some further fixes to the
  last set of security fixes, and some more from Will (which you may
  already have in a slightly different form)"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7807/1: kexec: validate CPU hotplug support
  ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock
  ARM: 7811/1: locks: use early clobber in arch_spin_trylock
  ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()
  ARM: 7809/1: perf: fix event validation for software group leaders
  ARM: Fix FIQ code on VIVT CPUs
  ARM: Fix !kuser helpers case
  ARM: Fix the world famous typo with is_gate_vma()

Pull m68k fixes from Geert Uytterhoeven:
 "These are two critical fixes, needed by distro kernels, and thus also
  destined for stable:

   - The do_div() commit fixes a crash in mounting btrfs volumes, which
     was a regression from 3.2,

   - The ARAnyM fix allows to have NatFeat drivers as loadable modules,
     which is needed for initrds"

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Truncate base in do_div()
  m68k/atari: ARAnyM - Fix NatFeat module support

Pull clock controller fixes from Michael Turquette:
 "Two small fixes for the Zynq clock controller introduced in 3.11-rc1
  and another Exynos clock patch which fixes a regression that prevents
  the video pipeline from functioning on that platform"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks
  clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
  clk/zynq/clkc: Add dedicated spinlock for the SWDT

Pull power management fix from Rafael Wysocki:
 "The removal of delayed_work_pending() checks from kernel/power/qos.c
  done in 3.9 introduced a deadlock in pm_qos_work_fn().

  Fix from Stephen Boyd"

* tag 'pm-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout()

Pull sound fixes from Takashi Iwai:
 "This batch contains a few USB audio fixes, a couple of HD-audio
  quirks, various small ASoC driver fixes in addition to an ASoC core
  fix that may lead to memory corruption.

  Unfortunately slightly more volume than the previous pull request, but
  all are reasonable regression fixes"

* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add a fixup for Gateway LT27
  ASoC: tegra: fix Tegra30 I2S capture parameter setup
  ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
  ALSA: hda - Fix missing mute controls for CX5051
  ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection
  ALSA: 6fire: make buffers DMA-able (midi)
  ALSA: 6fire: make buffers DMA-able (pcm)
  ALSA: hda - Add pinfix for LG LW25 laptop
  ASoC: cs42l52: Add new TLV for Beep Volume
  ASoC: cs42l52: Reorder Min/Max and update to SX_TLV for Beep Volume
  ASoC: dapm: Fix empty list check in dapm_new_mux()
  ASoC: sgtl5000: fix buggy 'Capture Attenuate Switch' control
  ASoC: sgtl5000: prevent playback to be muted when terminating concurrent capture