- 22 11月, 2012 10 次提交
-
-
由 Guennadi Liakhovetski 提交于
.set_crop() implementation in mx1_camera is identical with the default. Remove the copy to switch to using the default stab. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in mx2_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in mx3_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in pxa_camera.c. Fix them by adjusting a function declaration. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in sh_mobile_ceu_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in sh_vou. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The STDI block may measure wrong values, especially for lcvs and lcf. If the driver can not find any valid timing, the STDI block is restarted to measure the video timings again. The function will return an error, but the restart of STDI will generate a new STDI interrupt and the format detection process will restart. Signed-off-by: NMats Randgaard <matrandg@cisco.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Use predefined video timings (prim_mode/vid_std) when available as recommended by Analog Devices (http://ez.analog.com/message/48267#48267). Also remove 720p30 support since the ADV7604 can't handle that. (http://ez.analog.com/message/61488#61488) Signed-off-by: NMats Randgaard <matrandg@cisco.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Changes the way the primary mode is handled: - Remove it from platform_data since it doesn't belong there. - Add a new mode enum for use with s_routing. - Collapse the two HDMI modes into one HDMI mode: when setting up the timings manually we do not need to select HDMI_COMP mode. That's only needed when selecting a preset. This patch prepares for the next step where we switch to using the presets where available. Signed-off-by: NMats Randgaard <mats.randgaard@cisco.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NMats Randgaard <mats.randgaard@cisco.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 09 11月, 2012 1 次提交
-
-
由 Antti Palosaari 提交于
Fixes error: dvb_usb_v2: pid_filter() failed=-4 error code -4 is EINTR, Interrupted system call That error blocks I/O in some cases as -EINTR error was returned by the mutex which was protecting USB control messages. We want configure hardware to sleep mode on every case after tuning is stopped. That kind of behavior blocks it, leaving hardware some unwanted state in worst case. That error was seen every time when af9015 was plugged to USB1.1 which leads use of hardware PID filters. Stop tuning (tzap) with ctrl+c failed as driver tries to remove hardware PID filters. Tested with every hardware which uses routine in question. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 11月, 2012 1 次提交
-
-
由 Antti Palosaari 提交于
Code block braces were missing which leds broken error logging and compiler warning. drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usb_ctrl_feed': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:291:12: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Reported-by: NMilan Tuma <milan.olin@seznam.cz> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 10月, 2012 1 次提交
-
-
由 Shaik Ameer Basha 提交于
As G-Scaler is going to stay unchanged across all exynos5 series SoCs, changing the driver compatible string name to "samsung,exynos5-gsc" from "samsung,exynos5250-gsc". This change is as per the discussion in the devicetree forum. http://www.mail-archive.com/devicetree-discuss@lists.ozlabs.org/msg16448.htmlSigned-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 10月, 2012 7 次提交
-
-
由 Laurent Pinchart 提交于
Remove the const keyword from the V4L2 subdev events operations to match the V4L2 API. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Commit 4f996594 ("v4l2: make vidioc_s_crop const") modified the vidioc_s_crop operation prototype but forgot to update the OMAP3 ISP driver. Add a const keyword to fix the function prototype. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Wei Yongjun 提交于
The dereference should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sachin Kamat 提交于
'fimc' was being dereferenced before the NULL check. Moved it to after the check. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Make sure the platform sub-devices are registered to the media device driver only when v4l2_device_register_subdev() succeeds. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
After commit ccbfd1d4 "[media] s5p-csis: Replace phy_enable platform.." s5p-csis depends now on the commmon MIPI CSIS/MIPI DSIM DPHY control code. Add select S5P_SETUP_MIPIPHY to make this dependency explicit, until the code from arch/arm/plat-samsung is moved to drivers/ directory and converted to a regular phy driver module. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Add missing checks for return value of vb2_queue_init(), after this function has been modified recently to not throw BUG_ON(). This eliminates related compiler warnings, drivers/media/platform/s5p-fimc/fimc-lite.c: In function fimc_lite_subdev_registered: drivers/media/platform/s5p-fimc/fimc-lite.c:1256:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] drivers/media/platform/s5p-fimc/fimc-capture.c: In function fimc_register_capture_device: drivers/media/platform/s5p-fimc/fimc-capture.c:1739:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 10月, 2012 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
This option is a merge of both analog TV and DVB CUSTOMISE. At the merge, the dependencies were not done right: the menu currently appears only for analog TV. It should also be opened for digital TV. As there are other I2C devices there (flash devices, etc) that aren't related to either one, it is better to make it generic enough to open for all media devices with video. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 17 10月, 2012 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
The uapi changeset forgot to fix the header locations, needed for the DocBook specs. Fix it. Cc: David Howells <dhowells@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Linux 3.7-rc1 * tag 'v3.7-rc1': (9579 commits) Linux 3.7-rc1 x86, boot: Explicitly include autoconf.h for hostprogs perf: Fix UAPI fallout ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h perf: Handle new rbtree implementation procfs: don't need a PATH_MAX allocation to hold a string representation of an int vfs: embed struct filename inside of names_cache allocation if possible audit: make audit_inode take struct filename vfs: make path_openat take a struct filename pointer vfs: turn do_path_lookup into wrapper around struct filename variant audit: allow audit code to satisfy getname requests from its names_list vfs: define struct filename and have getname() return it btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids ...
-
- 15 10月, 2012 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
-
由 Matt Fleming 提交于
The hostprogs need access to the CONFIG_* symbols found in include/generated/autoconf.h. But commit abbf1590 ("UAPI: Partition the header include path sets and add uapi/ header directories") replaced $(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary include paths. This has the undesirable effect of breaking the EFI boot stub because the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is never compiled. It should also be noted that because $(USERINCLUDE) isn't exported by the top-level Makefile it's actually empty in arch/x86/boot/Makefile. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
The UAPI commits forgot to test tooling builds such as tools/perf/, and this fixes the fallout. Manual conversion. Signed-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2012 9 次提交
-
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM update from Russell King: "This is the final round of stuff for ARM, left until the end of the merge window to reduce the number of conflicts. This set contains the ARM part of David Howells UAPI changes, and a fix to the ordering of 'select' statements in ARM Kconfig files (see the appropriate commit for why this happened - thanks to Andrew Morton for pointing out the problem.) I've left this as long as I dare for this window to avoid conflicts, and I regenerated the config patch yesterday, posting it to our mailing list for review and testing. I have several acks which include successful test reports for it. However, today I notice we've got new conflicts with previously unseen code... though that conflict should be trivial (it's my changes vs a one liner.)" * 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate arch/arm/include/asm Fix up fairly conflict in arch/arm/Kconfig (the select re-organization vs recent addition of GENERIC_KERNEL_EXECVE)
-
git://git.infradead.org/users/dhowells/linux-headers由 Linus Torvalds 提交于
Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells: "The patches contained herein do the following: (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI. I checked this with Paul Mackerras before I created the patch and he suggested some extra bits to unexport. (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace applicable, and remove from the UAPI that part of linux/fs.h that was the reason for linux/blk_types.h being exported in the first place. I discussed this with Jens Axboe before creating the patch. (3) The big patch of the series to disintegrate include/linux/*.h as a unit. This could be split up, though there would be collisions in moving stuff between the two Kbuild files when the parts are merged as that file is sorted alphabetically rather than being grouped by subsystem. Of this set of headers, 17 files have changed in the UAPI exported region since the 4th and only 8 since the 9th so there isn't much change in this area - as one might expect. It should be pretty obvious and straightforward if it does come to fixing up: stuff in __KERNEL__ guards stays where it is and stuff outside moves to the same file in the include/uapi/linux/ directory. If a new file appears then things get a bit more complicated as the "headers +=" line has to move to include/uapi/linux/Kbuild. Only one new file has appeared since the 9th and I judge this type of event relatively unlikely. (4) A patch to disintegrate include/linux/byteorder/*.h as a unit. Signed-off-by: David Howells <dhowells@redhat.com>" * tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h
-
git://git.infradead.org/users/dhowells/linux-headers由 Linus Torvalds 提交于
Pull spi UAPI disintegration from David Howells: "This is to complete part of the Userspace API (UAPI) disintegration for which the preparatory patches were pulled recently. After these patches, userspace headers will be segregated into: include/uapi/linux/.../foo.h for the userspace interface stuff, and: include/linux/.../foo.h for the strictly kernel internal stuff. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>" * tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/spi
-
git://openrisc.net/jonas/linux由 Linus Torvalds 提交于
Pull OpenRISC uapi disintegration from Jonas Bonn: "OpenRISC UAPI disintegration work from David Howells" * tag 'openrisc-uapi' of git://openrisc.net/jonas/linux: UAPI: (Scripted) Disintegrate arch/openrisc/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull user namespace compile fixes from Eric W Biederman: "This tree contains three trivial fixes. One compiler warning, one thinko fix, and one build fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from NeilBrown: - "discard" support, some dm-raid improvements and other assorted bits and pieces. * tag 'md-3.7' of git://neil.brown.name/md: (29 commits) md: refine reporting of resync/reshape delays. md/raid5: be careful not to resize_stripes too big. md: make sure manual changes to recovery checkpoint are saved. md/raid10: use correct limit variable md: writing to sync_action should clear the read-auto state. Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races md/raid5: make sure to_read and to_write never go negative. md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write. md/raid5: protect debug message against NULL derefernce. md/raid5: add some missing locking in handle_failed_stripe. MD: raid5 avoid unnecessary zero page for trim MD: raid5 trim support md/bitmap:Don't use IS_ERR to judge alloc_page(). md/raid1: Don't release reference to device while handling read error. raid: replace list_for_each_continue_rcu with new interface add further __init annotations to crypto/xor.c DM RAID: Fix for "sync" directive ineffectiveness DM RAID: Fix comparison of index and quantity for "rebuild" parameter DM RAID: Add rebuild capability for RAID10 DM RAID: Move 'rebuild' checking code to its own function ...
-
由 Russell King 提交于
-
由 Russell King 提交于
The large platform selection choice should be sorted by option string so it's easy to find the platform you're looking for. Fix the few options which are out of this order. Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: NJason Cooper <jason@lakedaemon.net> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 10月, 2012 2 次提交
-
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-