- 25 1月, 2008 34 次提交
-
-
由 Olaf Hering 提交于
Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Commit 6d98bda7 changed the init order for chrp_pci_fixup_vt8231_ata(). It can not work anymore because either the irq is not yet set to 14 or pci_get_device() returns nothing. At least the printk() in chrp_pci_fixup_vt8231_ata() does not trigger anymore. pata_via works again on Pegasos with the change below. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Currently the IOMMU code allocates one page for the segment table, that isn't safe if we have more than 132 GB of RAM. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Since commit c80d9133 (Make direct DMA use node local allocations) went in this comment makes no sense. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
We no longer need the global dma_direct_offset, update the comment to reflect the new reality. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Rather than using the global variable, have celleb use its own variable to store the direct DMA offset. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Rather than using the global variable, have cell use its own variable to store the direct DMA offset. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Now that all platforms using dma_direct_offset setup the archdata.dma_data correctly, we can change the dma_direct_ops to retrieve the offset from the dma_data, rather than directly from the global. While we're here, change the way the offset is used - instead of or'ing it into the value, add it. This should have no effect on current implementations where the offset is far larger than memory, however in future we may want to use smaller offsets. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Celleb always uses dma_direct_ops, and sets dma_direct_offset, so it too should set dma_data to dma_direct_offset. Currently there's no pci_dma_dev_setup() routine for Celleb so add one. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Store the direct_dma_offset in each device's dma_data in the case where we're using the direct DMA ops. We need to make sure we setup the ppc_md.pci_dma_dev_setup() callback if we're using a non-zero offset. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
We must always hookup the pci_bus resource 0 to the PHB io_resource even if the latter is empty (the bus has no IO support). Otherwise, some other code will end up hooking it up to something bogus and the resource tree will end up being broken. This fixes boot on QS20 Cell blades where the IDE driver failed to allocate the IO resources due to breakage of the resource tree. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Update ps3_defconfig. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Remove the PS3 workaround needed to support sparsemem SPU mappings. The SPU mappings no longer use sparsemem, so this workaround is no longer needed. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
A general housekeeping change of the PS3 vuart variable vuart_bus_priv.probe_mutex from semaphore to mutex. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Takashi Yamamoto 提交于
Add PS3 logical performance monitor (lpm) device driver. The PS3's LV1 hypervisor provides a Logical Performance Monitor that abstracts the Cell processor's performance monitor features for use by guest operating systems. Signed-off-by: NTakashi Yamamoto <TakashiA.Yamamoto@jp.sony.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add PS3 logical performance monitor device support to the PS3 system-bus and platform device registration routines. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Takashi Yamamoto 提交于
Add repository routines for the PS3 Logical Performance Monitor. Signed-off-by: NTakashi Yamamoto <TakashiA.Yamamoto@jp.sony.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
Cleanup coding errors in arch/powerpc/platforms/ps3/repository.c as reported by sparse and checkpatch. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
Cleanup coding errors in drivers/ps3/ps3-vuart.c as reported by checkpatch. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
Cleanup coding errors in drivers/ps3/ps3-sys-manager.c as reported by checkpatch. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
PS3: Refactor ps3_repository_find_device() to use the existing ps3_repository_read_bus_id() routine. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
PS3: Kill unused routine ps3_repository_bump_device(). Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
PS3: Add repository polling loop to work around timing bug On some firmware versions (e.g. 1.90), the storage device may not show up in the repository immediately after receiving the notification message. Add a small polling loop to make sure we don't miss it. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
The PS3 hypervisor has a storage device notification mechanism to wait until a storage device is ready. Unfortunately the storage device probing code used this mechanism in an incorrect way, needing a polling loop and handling of devices that are not yet ready. This change corrects this by: - First waiting for the reception of an asynchronous notification that a new storage device became ready, - Then looking up the storage device in the device repository. On shutdown, the storage probe thread is stopped and the storage notification device is closed using a reboot notifier. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
The storage probe feature of the PS3 hypervisor returns device IDs. Add the corresponding repository routine ps3_repository_find_device_by_id() which can be used to retrieve the device info from the repository. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
Change the PS3 bus_id and dev_id from type unsigned int to u64. These IDs are 64-bit in the repository, and the special storage notification device has a device ID of ULONG_MAX. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add a definition for the Cell bookmark SPR to asm-powerpc/regs.h. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Neuling 提交于
This adds hooks into the default_machine_crash_shutdown so drivers can register a function to be run in the first kernel before we hand off to the second kernel. This should only be used in exceptional circumstances, like where the device can't be reset in the second kernel alone (as is the case with eHEA). To emphasize this, the number of handles allowed to be registered is currently #def to 1. This uses the setjmp/longjmp code around the call out to the registered hooks, so any bogus exceptions we encounter will hopefully be recoverable. Tested with bogus data and instruction exceptions. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Neuling 提交于
This makes the setjmp/longjmp code used by xmon, generically available to other code. It also removes the requirement for debugger hooks to be only called on 0x300 (data storage) exception. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Joseph Fannin 提交于
Export copy_page() on 32-bit powerpc; unionfs needs it. Unionfs already builds as a module on 64bit powerpc, so the export is placed within an existing CONFIG_PPC32 #ifdef. Signed-off-by: NJoseph Fannin <jfannin@gmail.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
smp_send_stop() will send an IPI to all other cpus to shut them down. However, for the case of xmon-based reboots (as well as potentially some panics), the other cpus are (or might be) spinning with interrupts off, and won't take the IPI. Current code will drop us into the debugger when the IPI fails, which means we're in an infinite loop that we can't get out of without an external reset of some sort. Instead, make the smp_send_stop() IPI call path just print the warning about being unable to send IPIs, but make it return so the rest of the shutdown sequence can continue. It's not perfect, but the lesser of two evils. Also move the call_lock handling outside of smp_call_function_map so we can avoid deadlocks in smp_send_stop(). Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
smp_call_function_map should be static, and for consistency prepend it with __ like other local helper functions in the same file. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 24 1月, 2008 6 次提交
-
-
由 Paul Mackerras 提交于
Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Acked-by: NAndy Wilcox <andy@protium.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: NJon Loeliger <jdl@freescale.com> Acked-by: NAndy Wilcox <andy@protium.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Based on the Kurobox DTS files. Signed-off-by: NJon Loeliger <jdl@freescale.com> Acked-by: NAndy Wilcox <andy@protium.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Prevents miscellaneous users from declaring it locally. Signed-off-by: NJon Loeliger <jdl@freecale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jochen Friedrich 提交于
This patch adds support to use the fixed-link property of an ethernet node to fs_enet for the CONFIG_PPC_CPM_NEW_BINDING case. Signed-off-by: NJochen Friedrich <jochen@scram.de> Acked-by: NJeff Garzik <jeff@garzik.org> Acked-by: NVitali Bordug <vitb@kernel.crashing.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-