1. 22 1月, 2014 1 次提交
  2. 27 12月, 2013 1 次提交
  3. 23 12月, 2013 1 次提交
  4. 07 12月, 2013 1 次提交
  5. 04 11月, 2013 1 次提交
    • D
      net: sctp: do not trigger BUG_ON in sctp_cmd_delete_tcb · 7926c1d5
      Daniel Borkmann 提交于
      Introduced in f9e42b85 ("net: sctp: sideeffect: throw BUG if
      primary_path is NULL"), we intended to find a buggy assoc that's
      part of the assoc hash table with a primary_path that is NULL.
      However, we better remove the BUG_ON for now and find a more
      suitable place to assert for these things as Mark reports that
      this also triggers the bug when duplication cookie processing
      happens, and the assoc is not part of the hash table (so all
      good in this case). Such a situation can for example easily be
      reproduced by:
      
        tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 1 1 1 1 1 1
        tc qdisc add dev eth0 parent 1:2 handle 20: netem loss 20%
        tc filter add dev eth0 protocol ip parent 1: prio 2 u32 match ip \
                  protocol 132 0xff match u8 0x0b 0xff at 32 flowid 1:2
      
      This drops 20% of COOKIE-ACK packets. After some follow-up
      discussion with Vlad we came to the conclusion that for now we
      should still better remove this BUG_ON() assertion, and come up
      with two follow-ups later on, that is, i) find a more suitable
      place for this assertion, and possibly ii) have a special
      allocator/initializer for such kind of temporary assocs.
      Reported-by: NMark Thomas <Mark.Thomas@metaswitch.com>
      Signed-off-by: NVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
      Acked-by: NNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7926c1d5
  6. 10 8月, 2013 1 次提交
  7. 25 7月, 2013 1 次提交
  8. 10 7月, 2013 1 次提交
    • D
      net: sctp: confirm route during forward progress · 8c2f414a
      Daniel Borkmann 提交于
      This fix has been proposed originally by Vlad Yasevich. He says:
      
        When SCTP makes forward progress (receives a SACK that acks new chunks,
        renegs, or answeres 0-window probes) or when HB-ACK arrives, mark
        the route as confirmed so we don't unnecessarily send NUD probes.
      
      Having a simple SCTP client/server that exchange data chunks every 1sec,
      without this patch ARP requests are sent periodically every 40-60sec.
      With this fix applied, an ARP request is only done once right at the
      "session" beginning. Also, when clearing the related ARP cache entry
      manually during the session, a new request is correctly done. I have
      only "backported" this to net-next and tested that it works, so full
      credit goes to Vlad.
      Signed-off-by: NVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
      Acked-by: NNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8c2f414a
  9. 02 7月, 2013 1 次提交
    • D
      net: sctp: rework debugging framework to use pr_debug and friends · bb33381d
      Daniel Borkmann 提交于
      We should get rid of all own SCTP debug printk macros and use the ones
      that the kernel offers anyway instead. This makes the code more readable
      and conform to the kernel code, and offers all the features of dynamic
      debbuging that pr_debug() et al has, such as only turning on/off portions
      of debug messages at runtime through debugfs. The runtime cost of having
      CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing,
      is negligible [1]. If kernel debugging is completly turned off, then these
      statements will also compile into "empty" functions.
      
      While we're at it, we also need to change the Kconfig option as it /now/
      only refers to the ifdef'ed code portions in outqueue.c that enable further
      debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code
      was enabled with this Kconfig option and has now been removed, we
      transform those code parts into WARNs resp. where appropriate BUG_ONs so
      that those bugs can be more easily detected as probably not many people
      have SCTP debugging permanently turned on.
      
      To turn on all SCTP debugging, the following steps are needed:
      
       # mount -t debugfs none /sys/kernel/debug
       # echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control
      
      This can be done more fine-grained on a per file, per line basis and others
      as described in [2].
      
       [1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf
       [2] Documentation/dynamic-debug-howto.txt
      Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bb33381d
  10. 15 6月, 2013 1 次提交
  11. 05 2月, 2013 1 次提交
  12. 04 12月, 2012 1 次提交
    • M
      sctp: Add support to per-association statistics via a new SCTP_GET_ASSOC_STATS call · 196d6759
      Michele Baldessari 提交于
      The current SCTP stack is lacking a mechanism to have per association
      statistics. This is an implementation modeled after OpenSolaris'
      SCTP_GET_ASSOC_STATS.
      
      Userspace part will follow on lksctp if/when there is a general ACK on
      this.
      V4:
      - Move ipackets++ before q->immediate.func() for consistency reasons
      - Move sctp_max_rto() at the end of sctp_transport_update_rto() to avoid
        returning bogus RTO values
      - return asoc->rto_min when max_obs_rto value has not changed
      
      V3:
      - Increase ictrlchunks in sctp_assoc_bh_rcv() as well
      - Move ipackets++ to sctp_inq_push()
      - return 0 when no rto updates took place since the last call
      
      V2:
      - Implement partial retrieval of stat struct to cope for future expansion
      - Kill the rtxpackets counter as it cannot be precise anyway
      - Rename outseqtsns to outofseqtsns to make it clearer that these are out
        of sequence unexpected TSNs
      - Move asoc->ipackets++ under a lock to avoid potential miscounts
      - Fold asoc->opackets++ into the already existing asoc check
      - Kill unneeded (q->asoc) test when increasing rtxchunks
      - Do not count octrlchunks if sending failed (SCTP_XMIT_OK != 0)
      - Don't count SHUTDOWNs as SACKs
      - Move SCTP_GET_ASSOC_STATS to the private space API
      - Adjust the len check in sctp_getsockopt_assoc_stats() to allow for
        future struct growth
      - Move association statistics in their own struct
      - Update idupchunks when we send a SACK with dup TSNs
      - return min_rto in max_rto when RTO has not changed. Also return the
        transport when max_rto last changed.
      
      Signed-off: Michele Baldessari <michele@acksyn.org>
      Acked-by: NVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      196d6759
  13. 21 11月, 2012 1 次提交
    • N
      sctp: send abort chunk when max_retrans exceeded · de4594a5
      Neil Horman 提交于
      In the event that an association exceeds its max_retrans attempts, we should
      send an ABORT chunk indicating that we are closing the assocation as a result.
      Because of the nature of the error, its unlikely to be received, but its a nice
      clean way to close the association if it does make it through, and it will give
      anyone watching via tcpdump a clue as to what happened.
      
      Change notes:
      v2)
      	* Removed erroneous changes from sctp_make_violation_parmlen
      Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
      CC: Vlad Yasevich <vyasevich@gmail.com>
      CC: "David S. Miller" <davem@davemloft.net>
      CC: linux-sctp@vger.kernel.org
      Acked-by: NVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      de4594a5
  14. 04 11月, 2012 1 次提交
    • N
      sctp: Clean up type-punning in sctp_cmd_t union · b26ddd81
      Neil Horman 提交于
      Lots of points in the sctp_cmd_interpreter function treat the sctp_cmd_t arg as
      a void pointer, even though they are written as various other types.  Theres no
      need for this as doing so just leads to possible type-punning issues that could
      cause crashes, and if we remain type-consistent we can actually just remove the
      void * member of the union entirely.
      
      Change Notes:
      
      v2)
      	* Dropped chunk that modified SCTP_NULL to create a marker pattern
      	 should anyone try to use a SCTP_NULL() assigned sctp_arg_t, Assigning
      	 to .zero provides the same effect and should be faster, per Vlad Y.
      
      v3)
      	* Reverted part of V2, opting to use memset instead of .zero, so that
      	 the entire union is initalized thus avoiding the i164 speculative load
      	 problems previously encountered, per Dave M..  Also rewrote
      	 SCTP_[NO]FORCE so as to use common infrastructure a little more
      
      Signed-off-by: Neil Horman <nhorman@tuxdriver.com
      CC: Vlad Yasevich <vyasevich@gmail.com>
      CC: "David S. Miller" <davem@davemloft.net>
      CC: linux-sctp@vger.kernel.org
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b26ddd81
  15. 17 10月, 2012 1 次提交
  16. 05 10月, 2012 1 次提交
  17. 15 8月, 2012 2 次提交
  18. 23 7月, 2012 1 次提交
    • N
      sctp: Implement quick failover draft from tsvwg · 5aa93bcf
      Neil Horman 提交于
      I've seen several attempts recently made to do quick failover of sctp transports
      by reducing various retransmit timers and counters.  While its possible to
      implement a faster failover on multihomed sctp associations, its not
      particularly robust, in that it can lead to unneeded retransmits, as well as
      false connection failures due to intermittent latency on a network.
      
      Instead, lets implement the new ietf quick failover draft found here:
      http://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05
      
      This will let the sctp stack identify transports that have had a small number of
      errors, and avoid using them quickly until their reliability can be
      re-established.  I've tested this out on two virt guests connected via multiple
      isolated virt networks and believe its in compliance with the above draft and
      works well.
      Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
      CC: Vlad Yasevich <vyasevich@gmail.com>
      CC: Sridhar Samudrala <sri@us.ibm.com>
      CC: "David S. Miller" <davem@davemloft.net>
      CC: linux-sctp@vger.kernel.org
      CC: joe@perches.com
      Acked-by: NVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5aa93bcf
  19. 01 7月, 2012 1 次提交
    • N
      sctp: be more restrictive in transport selection on bundled sacks · 4244854d
      Neil Horman 提交于
      It was noticed recently that when we send data on a transport, its possible that
      we might bundle a sack that arrived on a different transport.  While this isn't
      a major problem, it does go against the SHOULD requirement in section 6.4 of RFC
      2960:
      
       An endpoint SHOULD transmit reply chunks (e.g., SACK, HEARTBEAT ACK,
         etc.) to the same destination transport address from which it
         received the DATA or control chunk to which it is replying.  This
         rule should also be followed if the endpoint is bundling DATA chunks
         together with the reply chunk.
      
      This patch seeks to correct that.  It restricts the bundling of sack operations
      to only those transports which have moved the ctsn of the association forward
      since the last sack.  By doing this we guarantee that we only bundle outbound
      saks on a transport that has received a chunk since the last sack.  This brings
      us into stricter compliance with the RFC.
      
      Vlad had initially suggested that we strictly allow only sack bundling on the
      transport that last moved the ctsn forward.  While this makes sense, I was
      concerned that doing so prevented us from bundling in the case where we had
      received chunks that moved the ctsn on multiple transports.  In those cases, the
      RFC allows us to select any of the transports having received chunks to bundle
      the sack on.  so I've modified the approach to allow for that, by adding a state
      variable to each transport that tracks weather it has moved the ctsn since the
      last sack.  This I think keeps our behavior (and performance), close enough to
      our current profile that I think we can do this without a sysctl knob to
      enable/disable it.
      Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
      CC: Vlad Yaseivch <vyasevich@gmail.com>
      CC: David S. Miller <davem@davemloft.net>
      CC: linux-sctp@vger.kernel.org
      Reported-by: NMichele Baldessari <michele@redhat.com>
      Reported-by: Nsorin serban <sserban@redhat.com>
      Acked-by: NVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4244854d
  20. 16 5月, 2012 1 次提交
  21. 16 4月, 2012 1 次提交
  22. 09 11月, 2011 1 次提交
  23. 17 9月, 2011 1 次提交
    • M
      sctp: deal with multiple COOKIE_ECHO chunks · d5ccd496
      Max Matveev 提交于
      Attempt to reduce the number of IP packets emitted in response to single
      SCTP packet (2e3216cd) introduced a complication - if a packet contains
      two COOKIE_ECHO chunks and nothing else then SCTP state machine corks the
      socket while processing first COOKIE_ECHO and then loses the association
      and forgets to uncork the socket. To deal with the issue add new SCTP
      command which can be used to set association explictly. Use this new
      command when processing second COOKIE_ECHO chunk to restore the context
      for SCTP state machine.
      Signed-off-by: NMax Matveev <makc@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d5ccd496
  24. 08 7月, 2011 1 次提交
    • T
      sctp: Enforce retransmission limit during shutdown · f8d96052
      Thomas Graf 提交于
      When initiating a graceful shutdown while having data chunks
      on the retransmission queue with a peer which is in zero
      window mode the shutdown is never completed because the
      retransmission error count is reset periodically by the
      following two rules:
      
       - Do not timeout association while doing zero window probe.
       - Reset overall error count when a heartbeat request has
         been acknowledged.
      
      The graceful shutdown will wait for all outstanding TSN to
      be acknowledged before sending the SHUTDOWN request. This
      never happens due to the peer's zero window not acknowledging
      the continuously retransmitted data chunks. Although the
      error counter is incremented for each failed retransmission,
      the receiving of the SACK announcing the zero window clears
      the error count again immediately. Also heartbeat requests
      continue to be sent periodically. The peer acknowledges these
      requests causing the error counter to be reset as well.
      
      This patch changes behaviour to only reset the overall error
      counter for the above rules while not in shutdown. After
      reaching the maximum number of retransmission attempts, the
      T5 shutdown guard timer is scheduled to give the receiver
      some additional time to recover. The timer is stopped as soon
      as the receiver acknowledges any data.
      
      The issue can be easily reproduced by establishing a sctp
      association over the loopback device, constantly queueing
      data at the sender while not reading any at the receiver.
      Wait for the window to reach zero, then initiate a shutdown
      by killing both processes simultaneously. The association
      will never be freed and the chunks on the retransmission
      queue will be retransmitted indefinitely.
      Signed-off-by: NThomas Graf <tgraf@infradead.org>
      Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f8d96052
  25. 17 6月, 2011 1 次提交
  26. 01 6月, 2011 1 次提交
  27. 20 4月, 2011 2 次提交
  28. 31 3月, 2011 1 次提交
  29. 27 8月, 2010 1 次提交
  30. 18 5月, 2010 1 次提交
  31. 06 5月, 2010 1 次提交
    • V
      sctp: Fix a race between ICMP protocol unreachable and connect() · 50b5d6ad
      Vlad Yasevich 提交于
      ICMP protocol unreachable handling completely disregarded
      the fact that the user may have locked the socket.  It proceeded
      to destroy the association, even though the user may have
      held the lock and had a ref on the association.  This resulted
      in the following:
      
      Attempt to release alive inet socket f6afcc00
      
      =========================
      [ BUG: held lock freed! ]
      -------------------------
      somenu/2672 is freeing memory f6afcc00-f6afcfff, with a lock still held
      there!
       (sk_lock-AF_INET){+.+.+.}, at: [<c122098a>] sctp_connect+0x13/0x4c
      1 lock held by somenu/2672:
       #0:  (sk_lock-AF_INET){+.+.+.}, at: [<c122098a>] sctp_connect+0x13/0x4c
      
      stack backtrace:
      Pid: 2672, comm: somenu Not tainted 2.6.32-telco #55
      Call Trace:
       [<c1232266>] ? printk+0xf/0x11
       [<c1038553>] debug_check_no_locks_freed+0xce/0xff
       [<c10620b4>] kmem_cache_free+0x21/0x66
       [<c1185f25>] __sk_free+0x9d/0xab
       [<c1185f9c>] sk_free+0x1c/0x1e
       [<c1216e38>] sctp_association_put+0x32/0x89
       [<c1220865>] __sctp_connect+0x36d/0x3f4
       [<c122098a>] ? sctp_connect+0x13/0x4c
       [<c102d073>] ? autoremove_wake_function+0x0/0x33
       [<c12209a8>] sctp_connect+0x31/0x4c
       [<c11d1e80>] inet_dgram_connect+0x4b/0x55
       [<c11834fa>] sys_connect+0x54/0x71
       [<c103a3a2>] ? lock_release_non_nested+0x88/0x239
       [<c1054026>] ? might_fault+0x42/0x7c
       [<c1054026>] ? might_fault+0x42/0x7c
       [<c11847ab>] sys_socketcall+0x6d/0x178
       [<c10da994>] ? trace_hardirqs_on_thunk+0xc/0x10
       [<c1002959>] syscall_call+0x7/0xb
      
      This was because the sctp_wait_for_connect() would aqcure the socket
      lock and then proceed to release the last reference count on the
      association, thus cause the fully destruction path to finish freeing
      the socket.
      
      The simplest solution is to start a very short timer in case the socket
      is owned by user.  When the timer expires, we can do some verification
      and be able to do the release properly.
      Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      50b5d6ad
  32. 01 5月, 2010 1 次提交
  33. 29 4月, 2010 1 次提交
    • V
      sctp: Fix oops when sending queued ASCONF chunks · c0786693
      Vlad Yasevich 提交于
      When we finish processing ASCONF_ACK chunk, we try to send
      the next queued ASCONF.  This action runs the sctp state
      machine recursively and it's not prepared to do so.
      
      kernel BUG at kernel/timer.c:790!
      invalid opcode: 0000 [#1] SMP
      last sysfs file: /sys/module/ipv6/initstate
      Modules linked in: sha256_generic sctp libcrc32c ipv6 dm_multipath
      uinput 8139too i2c_piix4 8139cp mii i2c_core pcspkr virtio_net joydev
      floppy virtio_blk virtio_pci [last unloaded: scsi_wait_scan]
      
      Pid: 0, comm: swapper Not tainted 2.6.34-rc4 #15 /Bochs
      EIP: 0060:[<c044a2ef>] EFLAGS: 00010286 CPU: 0
      EIP is at add_timer+0xd/0x1b
      EAX: cecbab14 EBX: 000000f0 ECX: c0957b1c EDX: 03595cf4
      ESI: cecba800 EDI: cf276f00 EBP: c0957aa0 ESP: c0957aa0
       DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
      Process swapper (pid: 0, ti=c0956000 task=c0988ba0 task.ti=c0956000)
      Stack:
       c0957ae0 d1851214 c0ab62e4 c0ab5f26 0500ffff 00000004 00000005 00000004
      <0> 00000000 d18694fd 00000004 1666b892 cecba800 cecba800 c0957b14
      00000004
      <0> c0957b94 d1851b11 ceda8b00 cecba800 cf276f00 00000001 c0957b14
      000000d0
      Call Trace:
       [<d1851214>] ? sctp_side_effects+0x607/0xdfc [sctp]
       [<d1851b11>] ? sctp_do_sm+0x108/0x159 [sctp]
       [<d1863386>] ? sctp_pname+0x0/0x1d [sctp]
       [<d1861a56>] ? sctp_primitive_ASCONF+0x36/0x3b [sctp]
       [<d185657c>] ? sctp_process_asconf_ack+0x2a4/0x2d3 [sctp]
       [<d184e35c>] ? sctp_sf_do_asconf_ack+0x1dd/0x2b4 [sctp]
       [<d1851ac1>] ? sctp_do_sm+0xb8/0x159 [sctp]
       [<d1863334>] ? sctp_cname+0x0/0x52 [sctp]
       [<d1854377>] ? sctp_assoc_bh_rcv+0xac/0xe1 [sctp]
       [<d1858f0f>] ? sctp_inq_push+0x2d/0x30 [sctp]
       [<d186329d>] ? sctp_rcv+0x797/0x82e [sctp]
      Tested-by: NWei Yongjun <yjwei@cn.fujitsu.com>
      Signed-off-by: NYuansong Qiao <ysqiao@research.ait.ie>
      Signed-off-by: NShuaijun Zhang <szhang@research.ait.ie>
      Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c0786693
  34. 30 3月, 2010 1 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo 提交于
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      
        http://userweb.kernel.org/~tj/misc/slabh-sweep.py
      
      The script does the followings.
      
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
        file.
      
      The conversion was done in the following steps.
      
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
         files.
      
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
         necessary.
      
      6. percpu.h was updated not to include slab.h.
      
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
      
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  35. 09 2月, 2010 1 次提交
  36. 04 12月, 2009 1 次提交
  37. 29 11月, 2009 1 次提交
    • A
      sctp: on T3_RTX retransmit all the in-flight chunks · 5fdd4bae
      Andrei Pelinescu-Onciul 提交于
      When retransmitting due to T3 timeout, retransmit all the
      in-flight chunks for the corresponding  transport/path, including
      chunks sent less then 1 rto ago.
      This is the correct behaviour according to rfc4960 section 6.3.3
      E3 and
      "Note: Any DATA chunks that were sent to the address for which the
       T3-rtx timer expired but did not fit in one MTU (rule E3 above)
       should be marked for retransmission and sent as soon as cwnd
       allows (normally, when a SACK arrives). ".
      
      This fixes problems when more then one path is present and the T3
      retransmission of the first chunk that timeouts stops the T3 timer
      for the initial active path, leaving all the other in-flight
      chunks waiting forever or until a new chunk is transmitted on the
      same path and timeouts (and this will happen only if the cwnd
      allows sending new chunks, but since cwnd was dropped to MTU by
      the timeout => it will wait until the first heartbeat).
      
      Example: 10 packets in flight, sent at 0.1 s intervals on the
      primary path. The primary path is down and the first packet
      timeouts. The first packet is retransmitted on another path, the
      T3 timer for the primary path is stopped and cwnd is set to MTU.
      All the other 9 in-flight packets will not be retransmitted
      (unless more new packets are sent on the primary path which depend
      on cwnd allowing it, and even in this case the 9 packets will be
      retransmitted only after a new packet timeouts which even in the
      best case would be more then RTO).
      
      This commit reverts d0ce9291 and
      also removes the now unused transport->last_rto, introduced in
       b6157d8e.
      
      p.s  The problem is not only when multiple paths are there.  It
      can happen in a single homed environment.  If the application
      stops sending data, it possible to have a hung association.
      Signed-off-by: NAndrei Pelinescu-Onciul <andrei@iptel.org>
      Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5fdd4bae
  38. 24 11月, 2009 1 次提交