It's kzalloced ...
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

So after a lot of digging around in git histories it looks like this
has only ever be used by dri1 render clients. Hence we can fully
disable the entire thing for modesetting drivers and so greatly reduce
the attack surface for potential exploits (or at least tools like
trinity ...).

Also add the drm_legacy prefix for functions which are called from
common code. To further reduce the impact on common code also extract
all the ctx release handling into a function (instead of only
releasing individual handles) and make ctxbitmap_cleanup return void -
it can never fail.
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Now only legacy ums drivers have the DRIVER_HAVE_DMA driver feature
flag set, so strictly speaking the modesetting check is redundant. But
adding it has the upside that it makes it very clear that the dma
support is legacy stuff.
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

And hide the checks a bit better. This was already disallowed for
modesetting drivers, so no functinal change here.
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Only the radeon/r128/ati ums drivers use this. Furthermore the cleanup
was already only done for UMS drivers. Also a quick check of the ATI
ddx git history shows that only the UMS code ever used this facility.

So we can safely disallow these pair of ioctls for modesetting
drivers.
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

I've decided that some clear markers for what's legacy dri1/non-gem
code is useful. I've opted to use the drm_legacy prefix and then hide
all the checks in that function for better readability in the common
code.
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Totally unused, so just rip it out. Anyway, we want drivers to be
fully backwards compatible, allowing them to change behaviour is just
a recipe for them to break badly.
Reviewed-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Again, it does nothing.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

KMS drivers really shouldn't need to do anything on firstopen, so kill
empty callbacks.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This field is never read. No need to set it in radeon. Besides, DRM gem
core clears it during setup, anyway.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

These two helpers are unused. Remove them. They rely on
gem_obj->driver_private, which is set to NULL during setup. As this field
isn't used by the driver, anymore, we can remove this assignment as well.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

gem_bo->driver_private is never read by cirrus nor DRM core. No need to
set it. Besides, drm core clears it during setup, anyway.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

gem_bo->driver_private is never read by mgag200 nor DRM core. No need to
set it. Besides, drm core clears it during setup, anyway.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

gem_bo->driver_private is never read by ast nor DRM core. No need to set
it. Besides, drm core clears it during setup, anyway.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge the rcar stable branch that is being shared with the arm-soc tree.
Signed-off-by: NDave Airlie <airlied@redhat.com>
* pfdo/drm-rcar-for-v3.12: (220 commits)
  drm/rcar-du: Add FBDEV emulation support
  drm/rcar-du: Add internal LVDS encoder support
  drm/rcar-du: Configure RGB output routing to DPAD0
  drm/rcar-du: Rework output routing support
  drm/rcar-du: Add support for DEFR8 register
  drm/rcar-du: Add support for multiple groups
  drm/rcar-du: Fix buffer pitch alignment for R8A7790 DU
  drm/rcar-du: Add support for the R8A7790 DU
  drm/rcar-du: Move output routing configuration to group
  drm/rcar-du: Remove register definitions for the second channel
  drm/rcar-du: Use dynamic number of CRTCs instead of CRTCs array size
  drm/rcar-du: Introduce CRTCs groups
  drm/rcar-du: Rename rcar_du_plane_(init|register) to rcar_du_planes_*
  drm/rcar-du: Create rcar_du_planes structure
  drm/rcar-du: Rename platform data fields to match what they describe
  drm/rcar-du: Merge LVDS and VGA encoder code
  drm/rcar-du: Split VGA encoder and connector
  drm/rcar-du: Split LVDS encoder and connector
  drm/rcar-du: Clarify comment regarding plane Y source coordinate
  drm/rcar-du: Support per-CRTC clock and IRQ
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/qxl/qxl_release.c

Add a fixup function that will flip the hsync priority and
add a hskew value that is used to shift the tda998x to the
right by a variable number of pixels depending on the mode.
This works around an issue with the sync timings that tilcdc
is outputing.
Signed-off-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some LCD controller cannot provide valid VESA style sync, i.e. coincident
HS/VS edges. First, this patch adds hskew passed from the adjusted_mode to
reference pixel calculation to allow those controllers to add an offset
relative to the expected reference pixel.
Signed-off-by: NDarren Etheridge <detheridge@ti.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes the wrong sync generation and sync calculation of TDA998x
for HS/VS-based sync detection.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds tda998x specific parameters to allow it to be configured
for different boards using it. Also, this implements rudimentary audio
support for S/PDIF attached controllers.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The video-input-port (VIP) is highly configurable. This prepares
current driver to allow to configure VIP configuration, as some
boards connect lcd controller and TDA998x "pin-swapped" and depend
on VIP to swap the pins by register configuration.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The npix/nline registers are supposed to be programmed with the total
number of pixels/lines, not the displayed pixels/lines, and not minus
one either.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When switching between various drivers for this device, it's possible
that some critical registers are left containing values which affect
the device operation.  One such case encountered is the VIP output
mux register.  This defaults to 0x24 on powerup, but other drivers may
set this to 0x12.  This results in incorrect colours.

Fix this by ensuring that the register is always set to the power on
default setting.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

TDA19988 devices need their RAM enabled in order to read EDID
information.  Add support for this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NRob Clark <robdclark@gmail.com>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If NO_DMA=y:

drivers/built-in.o: In function `__drm_pci_free':
drivers/gpu/drm/drm_pci.c:112: undefined reference to `dma_free_coherent'
drivers/built-in.o: In function `drm_pci_alloc':
drivers/gpu/drm/drm_pci.c:72: undefined reference to `dma_alloc_coherent'
drivers/built-in.o: In function `drm_gem_unmap_dma_buf':
drivers/gpu/drm/drm_prime.c:87: undefined reference to `dma_unmap_sg'
drivers/built-in.o: In function `drm_gem_map_dma_buf':
drivers/gpu/drm/drm_prime.c:78: undefined reference to `dma_map_sg'
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Create topic branch for rcar for shmobile tree to pull as well, arm-soc should
probably merge after drm merges if possible.
Signed-off-by: NDave Airlie <airlied@redhat.com>
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev: (23 commits)
  drm/rcar-du: Add FBDEV emulation support
  drm/rcar-du: Add internal LVDS encoder support
  drm/rcar-du: Configure RGB output routing to DPAD0
  drm/rcar-du: Rework output routing support
  drm/rcar-du: Add support for DEFR8 register
  drm/rcar-du: Add support for multiple groups
  drm/rcar-du: Fix buffer pitch alignment for R8A7790 DU
  drm/rcar-du: Add support for the R8A7790 DU
  drm/rcar-du: Move output routing configuration to group
  drm/rcar-du: Remove register definitions for the second channel
  drm/rcar-du: Use dynamic number of CRTCs instead of CRTCs array size
  drm/rcar-du: Introduce CRTCs groups
  drm/rcar-du: Rename rcar_du_plane_(init|register) to rcar_du_planes_*
  drm/rcar-du: Create rcar_du_planes structure
  drm/rcar-du: Rename platform data fields to match what they describe
  drm/rcar-du: Merge LVDS and VGA encoder code
  drm/rcar-du: Split VGA encoder and connector
  drm/rcar-du: Split LVDS encoder and connector
  drm/rcar-du: Clarify comment regarding plane Y source coordinate
  drm/rcar-du: Support per-CRTC clock and IRQ
  ...

Use the FB CMA helpers to implement FBDEV emulation support. The VGA
connector status must be reported as connector_status_connected instead
of connector_status_unknown to be usable by the emulation layer.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The R8A7790 includes two internal LVDS encoders. Support them in the DU
driver.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The R8A7790 DU variant has a single RGB output called DPAD0 that can be
fed with the output of DU0, DU1 or DU2. Making the routing configurable.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Split the output routing specification between SoC-internal data,
specified in the rcar_du_device_info structure, and board data, passed
through platform data.

The DU has 5 possible outputs (DPAD0/1, LVDS0/1, TCON). SoC-internal
output routing data specify which output are valid, which CRTCs can be
connected to the valid outputs, and the type of in-SoC encoder for the
output.

Platform data then specifies external encoders and the output they are
connected to.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The R8A7790 DU has a new extended function control register. Support it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The R8A7790 DU has 3 CRTCs, split in two groups. Support them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The R8A7790 DU seems to require a 128 bytes pitch alignment, even though
the documentation only mentions a 16 pixels alignement as for the
R8A7779 DU. Make this configurable through a device flag.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The DU revision in the R8A7790 SoC uses one IRQ and clock per CRTC. Add
a corresponding entry in the module platform ID table.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Output routing is configured in group registers, move the corresponding
code from rcar_du_crtc.c to rcar_du_group.c.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Channels are accessed through a global channel memory offset, there's no
need to define register addresses for the second channel.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The rcar_du_device structure contains a field that stores the number of
CRTCs, use it instead of the CRTCs array size. This prepares the driver
to support a variable number of CRTCs.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The R8A7779 DU is split in per-CRTC resources (scan-out engine, blending
unit, timings generator, ...) and device-global resources (start/stop
control, planes, ...) shared between the two CRTCs.

The R8A7790 introduced a third CRTC with its own set of global resources
This would be modeled as two separate DU device instances if it wasn't
for a handful or resources that are shared between the three CRTCs
(mostly related to input and output routing). For this reason the
R8A7790 DU must be modeled as a single device with three CRTCs, two sets
of "semi-global" resources, and a few device-global resources.

Introduce a new rcar_du_group driver-specific object, without any real
counterpart in the DU documentation, that models those semi-global
resources.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The functions initialize or register all planes, rename them
accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Move the plane-related fields of struct rcar_du_device to their own
structure.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>