- 26 2月, 2016 9 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Another small bug reported to me by Chunyu Hu. When perf added a "reg" function to the function tracing event (not a tracepoint), it caused that event to be displayed as a tracepoint and could cause errors in tracepoint handling. That was solved by adding a flag to ignore ftrace non-tracepoint events. But that flag was missed when displaying events in available_events, which should only contain tracepoint events. This broke a documented way to enable all events with: cat available_events > set_event As the function non-tracepoint event would cause that to error out. The commit here fixes that by having the available_events file not list events that have the ignore flag set" * tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix showing function event in available_events
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "KVM/ARM fixes: - Fix per-vcpu vgic bitmap allocation - Do not give copy random memory on MMIO read - Fix GICv3 APR register restore order KVM/x86 fixes: - Fix ubsan warning - Fix hardware breakpoints in a guest vs. preempt notifiers - Fix Hurd Generic: - use __GFP_NOWARN together with GFP_NOWAIT" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: MMU: fix ubsan index-out-of-range warning arm64: KVM: vgic-v3: Restore ICH_APR0Rn_EL2 before ICH_APR1Rn_EL2 KVM: async_pf: do not warn on page allocation failures KVM: x86: fix conversion of addresses to linear in 32-bit protected mode KVM: x86: fix missed hardware breakpoints arm/arm64: KVM: Feed initialized memory to MMIO accesses KVM: arm/arm64: vgic: Ensure bitmaps are long enough
-
由 Linus Torvalds 提交于
Merge tag 'renesas-sh-drivers-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SuperH driver fix from Simon Horman: "Restore legacy clock domain on SuperH platforms" * tag 'renesas-sh-drivers-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: drivers: sh: Restore legacy clock domain on SuperH platforms
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - eeh: Fix partial hotplug criterion from Gavin Shan - mm: Clear the invalid slot information correctly from Aneesh Kumar K.V * tag 'powerpc-4.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/hash: Clear the invalid slot information correctly powerpc/eeh: Fix partial hotplug criterion
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 bugfixes from Martin Schwidefsky: "Two critical bug fixes for the signal handling" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/fpu: signals vs. floating point control register s390/compat: correct restore of high gprs on signal return
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd bugfix from Bruce Fields: "One fix for a bug that could cause a NULL write past the end of a buffer in case of unusually long writes to some system interfaces used by mountd and other nfs support utilities" * tag 'nfsd-4.5-1' of git://linux-nfs.org/~bfields/linux: sunrpc/cache: fix off-by-one in qword_get()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This is a bit larger than Id like, but I asked the Intel guys to pull in some Skylake fixes in the possibly vain hope that Skylake might be more functional now that I'm seeing production hardware shipping. For i915, it's mostly the same patch in a few places, making sure the hw doesn't turn off when we are programming it. Apart from that are two nouveau fixes, one for a module defer bug, and one for using nouveau on new Lenovo P50 models. Then there are a bunch of AMDGPU fixes, one is a fix for v4.4 vblank regressions, and some PM fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits) drm/nouveau/disp/dp: ensure sink is powered up before attempting link training drm/nouveau: platform: Fix deferred probe drm/amdgpu: disable direct VM updates when vm_debug is set amdgpu: fix NULL pointer dereference at tonga_check_states_equal drm/i915/gen9: Verify and enforce dc6 state writes drm/i915/gen9: Check for DC state mismatch drm/radeon/pm: adjust display configuration after powerstate drm/amdgpu/pm: adjust display configuration after powerstate drm/amdgpu/pm: add some checks for PX drm/amdgpu: fix locking in force performance level drm/amdgpu/gfx8: fix priv reg interrupt enable drm/i915/skl: Ensure HW is powered during DDB HW state readout drm/i915/lvds: Ensure the HW is powered during HW state readout drm/i915/hdmi: Ensure the HW is powered during HW state readout drm/i915/dsi: Ensure the HW is powered during HW state readout drm/i915/dp: Ensure the HW is powered during HW state readout drm/i915: Ensure the HW is powered when accessing the CRC HW block drm/i915/ddi: Ensure the HW is powered during HW state readout drm/i915/crt: Ensure the HW is powered during HW state readout drm/i915: Ensure the HW is powered during HW access in assert_pipe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: - Two fixes for compatibility with the ACPI 6.1 specification. Without these fixes multi-interface DIMMs will fail to be probed, and address range scrub commands to find memory errors will give results that the kernel will mis-interpret. For multi-interface DIMMs Linux will accept either the original 6.0 implementation or 6.1. For address range scrub we'll only support 6.1 since ACPI formalized this DSM differently than the original example [1] implemented in v4.2. The expectation is that production systems will only ever ship the ACPI 6.1 address range scrub command definition. - The wider async address range scrub work targeting 4.6 discovered that the original synchronous implementation in 4.5 is not sizing its return buffer correctly. - Arnd caught that my recent fix to the size of the pfn_t flags missed updating the flags variable used in the pmem driver. - Toshi found that we mishandle the memremap() return value in devm_memremap(). * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: use 'u64' for pfn flags devm_memremap: Fix error value when memremap failed nfit: update address range scrub commands to the acpi 6.1 format libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing nfit: fix multi-interface dimm handling, acpi6.1 compatibility
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply由 Linus Torvalds 提交于
Pull power supply fixes from Sebastian Reichel: "Add a regression fix for changed sysfs path of bq27xxx_battery and update MAINTAINERS file" * tag 'for-v4.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: bq27xxx_battery: Restore device name MAINTAINERS: update bq27xxx driver
-
- 25 2月, 2016 14 次提交
-
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-arm-for-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for 4.5-rc6 - Fix per-vcpu vgic bitmap allocation - Do not give copy random memory on MMIO read - Fix GICv3 APR register restore order
-
由 Mike Krinkin 提交于
Ubsan reports the following warning due to a typo in update_accessed_dirty_bits template, the patch fixes the typo: [ 168.791851] ================================================================================ [ 168.791862] UBSAN: Undefined behaviour in arch/x86/kvm/paging_tmpl.h:252:15 [ 168.791866] index 4 is out of range for type 'u64 [4]' [ 168.791871] CPU: 0 PID: 2950 Comm: qemu-system-x86 Tainted: G O L 4.5.0-rc5-next-20160222 #7 [ 168.791873] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013 [ 168.791876] 0000000000000000 ffff8801cfcaf208 ffffffff81c9f780 0000000041b58ab3 [ 168.791882] ffffffff82eb2cc1 ffffffff81c9f6b4 ffff8801cfcaf230 ffff8801cfcaf1e0 [ 168.791886] 0000000000000004 0000000000000001 0000000000000000 ffffffffa1981600 [ 168.791891] Call Trace: [ 168.791899] [<ffffffff81c9f780>] dump_stack+0xcc/0x12c [ 168.791904] [<ffffffff81c9f6b4>] ? _atomic_dec_and_lock+0xc4/0xc4 [ 168.791910] [<ffffffff81da9e81>] ubsan_epilogue+0xd/0x8a [ 168.791914] [<ffffffff81daafa2>] __ubsan_handle_out_of_bounds+0x15c/0x1a3 [ 168.791918] [<ffffffff81daae46>] ? __ubsan_handle_shift_out_of_bounds+0x2bd/0x2bd [ 168.791922] [<ffffffff811287ef>] ? get_user_pages_fast+0x2bf/0x360 [ 168.791954] [<ffffffffa1794050>] ? kvm_largepages_enabled+0x30/0x30 [kvm] [ 168.791958] [<ffffffff81128530>] ? __get_user_pages_fast+0x360/0x360 [ 168.791987] [<ffffffffa181b818>] paging64_walk_addr_generic+0x1b28/0x2600 [kvm] [ 168.792014] [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm] [ 168.792019] [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350 [ 168.792044] [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm] [ 168.792076] [<ffffffffa181c36d>] paging64_gva_to_gpa+0x7d/0x110 [kvm] [ 168.792121] [<ffffffffa181c2f0>] ? paging64_walk_addr_generic+0x2600/0x2600 [kvm] [ 168.792130] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90 [ 168.792178] [<ffffffffa17d9a4a>] emulator_read_write_onepage+0x27a/0x1150 [kvm] [ 168.792208] [<ffffffffa1794d44>] ? __kvm_read_guest_page+0x54/0x70 [kvm] [ 168.792234] [<ffffffffa17d97d0>] ? kvm_task_switch+0x160/0x160 [kvm] [ 168.792238] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90 [ 168.792263] [<ffffffffa17daa07>] emulator_read_write+0xe7/0x6d0 [kvm] [ 168.792290] [<ffffffffa183b620>] ? em_cr_write+0x230/0x230 [kvm] [ 168.792314] [<ffffffffa17db005>] emulator_write_emulated+0x15/0x20 [kvm] [ 168.792340] [<ffffffffa18465f8>] segmented_write+0xf8/0x130 [kvm] [ 168.792367] [<ffffffffa1846500>] ? em_lgdt+0x20/0x20 [kvm] [ 168.792374] [<ffffffffa14db512>] ? vmx_read_guest_seg_ar+0x42/0x1e0 [kvm_intel] [ 168.792400] [<ffffffffa1846d82>] writeback+0x3f2/0x700 [kvm] [ 168.792424] [<ffffffffa1846990>] ? em_sidt+0xa0/0xa0 [kvm] [ 168.792449] [<ffffffffa185554d>] ? x86_decode_insn+0x1b3d/0x4f70 [kvm] [ 168.792474] [<ffffffffa1859032>] x86_emulate_insn+0x572/0x3010 [kvm] [ 168.792499] [<ffffffffa17e71dd>] x86_emulate_instruction+0x3bd/0x2110 [kvm] [ 168.792524] [<ffffffffa17e6e20>] ? reexecute_instruction.part.110+0x2e0/0x2e0 [kvm] [ 168.792532] [<ffffffffa14e9a81>] handle_ept_misconfig+0x61/0x460 [kvm_intel] [ 168.792539] [<ffffffffa14e9a20>] ? handle_pause+0x450/0x450 [kvm_intel] [ 168.792546] [<ffffffffa15130ea>] vmx_handle_exit+0xd6a/0x1ad0 [kvm_intel] [ 168.792572] [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm] [ 168.792597] [<ffffffffa17f6bcd>] kvm_arch_vcpu_ioctl_run+0xd3d/0x6090 [kvm] [ 168.792621] [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm] [ 168.792627] [<ffffffff8293b530>] ? __ww_mutex_lock_interruptible+0x1630/0x1630 [ 168.792651] [<ffffffffa17f5e90>] ? kvm_arch_vcpu_runnable+0x4f0/0x4f0 [kvm] [ 168.792656] [<ffffffff811eeb30>] ? preempt_notifier_unregister+0x190/0x190 [ 168.792681] [<ffffffffa17e0447>] ? kvm_arch_vcpu_load+0x127/0x650 [kvm] [ 168.792704] [<ffffffffa178e9a3>] kvm_vcpu_ioctl+0x553/0xda0 [kvm] [ 168.792727] [<ffffffffa178e450>] ? vcpu_put+0x40/0x40 [kvm] [ 168.792732] [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350 [ 168.792735] [<ffffffff82946087>] ? _raw_spin_unlock+0x27/0x40 [ 168.792740] [<ffffffff8163a943>] ? handle_mm_fault+0x1673/0x2e40 [ 168.792744] [<ffffffff8129daa8>] ? trace_hardirqs_on_caller+0x478/0x6c0 [ 168.792747] [<ffffffff8129dcfd>] ? trace_hardirqs_on+0xd/0x10 [ 168.792751] [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90 [ 168.792756] [<ffffffff81725a80>] do_vfs_ioctl+0x1b0/0x12b0 [ 168.792759] [<ffffffff817258d0>] ? ioctl_preallocate+0x210/0x210 [ 168.792763] [<ffffffff8174aef3>] ? __fget+0x273/0x4a0 [ 168.792766] [<ffffffff8174acd0>] ? __fget+0x50/0x4a0 [ 168.792770] [<ffffffff8174b1f6>] ? __fget_light+0x96/0x2b0 [ 168.792773] [<ffffffff81726bf9>] SyS_ioctl+0x79/0x90 [ 168.792777] [<ffffffff82946880>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 168.792780] ================================================================================ Signed-off-by: NMike Krinkin <krinkin.m.u@gmail.com> Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
git://github.com/skeggsb/linux由 Dave Airlie 提交于
single for for eDP panel issues on Lenovo P50 * 'linux-4.5' of git://github.com/skeggsb/linux: drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
-
由 Ben Skeggs 提交于
This can happen under some annoying circumstances, and is a quick fix until more substantial changes can be made. Fixed eDP mode changes on (at least) the Lenovo P50. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
由 Thierry Reding 提交于
The error cleanup paths aren't quite correct and will crash upon deferred probe. Cc: stable@vger.kernel.org # v4.3+ Reviewed-by: NBen Skeggs <bskeggs@redhat.com> Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Geert Uytterhoeven 提交于
CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms (which are DT based and multi-platform), but also on a select set of Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence since commit 0ba58de2 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer installed on these SuperH platforms, and module clocks may not be enabled when needed, leading to driver failures. To fix this, add an additional check for CONFIG_OF. Fixes: 0ba58de2 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI"). Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
This is a bit large, but it really helps Skylake bugs we are seeing on a number of laptops. Most of the commits are quite similar, ensuring the display power doesn't vanish under us during hardware access. Also do note that it's not just Skylake that's affected. * tag 'drm-intel-fixes-2016-02-22' of git://anongit.freedesktop.org/drm-intel: drm/i915/gen9: Verify and enforce dc6 state writes drm/i915/gen9: Check for DC state mismatch drm/i915/skl: Ensure HW is powered during DDB HW state readout drm/i915/lvds: Ensure the HW is powered during HW state readout drm/i915/hdmi: Ensure the HW is powered during HW state readout drm/i915/dsi: Ensure the HW is powered during HW state readout drm/i915/dp: Ensure the HW is powered during HW state readout drm/i915: Ensure the HW is powered when accessing the CRC HW block drm/i915/ddi: Ensure the HW is powered during HW state readout drm/i915/crt: Ensure the HW is powered during HW state readout drm/i915: Ensure the HW is powered during HW access in assert_pipe drm/i915: Ensure the HW is powered when disabling VGA drm/i915/ibx: Ensure the HW is powered during PLL HW readout drm/i915: Ensure the HW is powered during display pipe HW readout drm/i915: Add helper to get a display power ref if it was already enabled
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
A few radeon and amdgpu fixes for 4.5. A few further fixes for the vblank regressions in 4.4 and a couple of other minor fixes. * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: disable direct VM updates when vm_debug is set amdgpu: fix NULL pointer dereference at tonga_check_states_equal drm/radeon/pm: adjust display configuration after powerstate drm/amdgpu/pm: adjust display configuration after powerstate drm/amdgpu/pm: add some checks for PX drm/amdgpu: fix locking in force performance level drm/amdgpu/gfx8: fix priv reg interrupt enable drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc. drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fixes from Vineet Gupta: - Fix for csd deadlock due to missing self IPI - Accompanying IPI cleanups / optimization - Brown paper bag bug in one of the cleanups above - Boot reporting updates for new hardware features - Don't force DEVTMPFS if INITRAMFS * tag 'arc-4.5-rc6-fixes-upd' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: SMP: CONFIG_ARC_IPI_DBG cleanup ARC: SMP: No need for CONFIG_ARC_IPI_DBG ARCv2: Elide sending new cross core intr if receiver didn't ack prev ARCv2: SMP: Push IPI_IRQ into IPI provider ARC: [intc-compact] Remove IPI setup from ARCompact port ARCv2: SMP: Emulate IPI to self using software triggered interrupt arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCE ARCv2: boot report CCMs (Closely Coupled Memories) ARCv2: boot print Low Latency Memory ARC: Assume multiplier is always present
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "Assorted fixes - xattr one from this cycle, the rest - stable fodder" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/pnode.c: treat zero mnt_group_id-s as unequal affs_do_readpage_ofs(): just use kmap_atomic() around memcpy() xattr handlers: plug a lock leak in simple_xattr_list fs: allow no_seek_end_llseek to actually seek
-
由 Kirill A. Shutemov 提交于
Sebastian Ott and Gerald Schaefer reported random crashes on s390. It was bisected to my THP refcounting patchset. The problem is that pmdp_invalidated() called with wrong virtual address. It got offset up by HPAGE_PMD_SIZE by loop over ptes. The solution is to introduce new variable to be used in loop and don't touch 'haddr'. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-tested-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Reported-and-tested-by Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NWill Deacon <will.deacon@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian König 提交于
That should make user space bugs more obvious. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Bradley Pankow 提交于
The event_data passed from pem_fini was not cleared upon initialization. This caused NULL checks to pass and cast_const_phw_tonga_power_state to attempt to dereference an invalid pointer. Clear the event_data in pem_init and pem_fini before calling pem_handle_event. Reviewed-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NBradley Pankow <btpankow@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Marc Zyngier 提交于
The GICv3 architecture spec says: Writing to the active priority registers in any order other than the following order will result in UNPREDICTABLE behavior: - ICH_AP0R<n>_EL2. - ICH_AP1R<n>_EL2. So let's not pointlessly go against the rule... Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 24 2月, 2016 17 次提交
-
-
由 Steven Rostedt (Red Hat) 提交于
The ftrace:function event is only displayed for parsing the function tracer data. It is not used to enable function tracing, and does not include an "enable" file in its event directory. Originally, this event was kept separate from other events because it did not have a ->reg parameter. But perf added a "reg" parameter for its use which caused issues, because it made the event available to functions where it was not compatible for. Commit 9b63776f "tracing: Do not enable function event with enable" added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event from being enabled by normal trace events. But this commit missed keeping the function event from being displayed by the "available_events" directory, which is used to show what events can be enabled by set_event. One documented way to enable all events is to: cat available_events > set_event But because the function event is displayed in the available_events, this now causes an INVALID error: cat: write error: Invalid argument Reported-by: NChunyu Hu <chuhu@redhat.com> Fixes: 9b63776f "tracing: Do not enable function event with enable" Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Christian Borntraeger 提交于
In async_pf we try to allocate with NOWAIT to get an element quickly or fail. This code also handle failures gracefully. Lets silence potential page allocation failures under load. qemu-system-s39: page allocation failure: order:0,mode:0x2200000 [...] Call Trace: ([<00000000001146b8>] show_trace+0xf8/0x148) [<000000000011476a>] show_stack+0x62/0xe8 [<00000000004a36b8>] dump_stack+0x70/0x98 [<0000000000272c3a>] warn_alloc_failed+0xd2/0x148 [<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38 [<00000000002cd36a>] new_slab+0x382/0x400 [<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378 [<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0 [<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198 [<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58 [<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690 [<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510 [<00000000002f68ec>] SyS_ioctl+0xa4/0xb8 [<0000000000781c5e>] system_call+0xd6/0x264 [<000003ffa24fa06a>] 0x3ffa24fa06a Cc: stable@vger.kernel.org Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Commit e8dd2d2d ("Silence compiler warning in arch/x86/kvm/emulate.c", 2015-09-06) broke boot of the Hurd. The bug is that the "default:" case actually could modify "la", but after the patch this change is not reflected in *linear. The bug is visible whenever a non-zero segment base causes the linear address to wrap around the 4GB mark. Fixes: e8dd2d2d Cc: stable@vger.kernel.org Reported-by: NAurelien Jarno <aurelien@aurel32.net> Tested-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Sometimes when setting a breakpoint a process doesn't stop on it. This is because the debug registers are not loaded correctly on VCPU load. The following simple reproducer from Oleg Nesterov tries using debug registers in two threads. To see the bug, run a 2-VCPU guest with "taskset -c 0" and run "./bp 0 1" inside the guest. #include <unistd.h> #include <signal.h> #include <stdlib.h> #include <stdio.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <sys/user.h> #include <asm/debugreg.h> #include <assert.h> #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len) { unsigned long dr7; dr7 = ((len | type) & 0xf) << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE); if (enable) dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE)); return dr7; } int write_dr(int pid, int dr, unsigned long val) { return ptrace(PTRACE_POKEUSER, pid, offsetof (struct user, u_debugreg[dr]), val); } void set_bp(pid_t pid, void *addr) { unsigned long dr7; assert(write_dr(pid, 0, (long)addr) == 0); dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1); assert(write_dr(pid, 7, dr7) == 0); } void *get_rip(int pid) { return (void*)ptrace(PTRACE_PEEKUSER, pid, offsetof(struct user, regs.rip), 0); } void test(int nr) { void *bp_addr = &&label + nr, *bp_hit; int pid; printf("test bp %d\n", nr); assert(nr < 16); // see 16 asm nops below pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); kill(getpid(), SIGSTOP); for (;;) { label: asm ( "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" ); } } assert(pid == wait(NULL)); set_bp(pid, bp_addr); for (;;) { assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0); assert(pid == wait(NULL)); bp_hit = get_rip(pid); if (bp_hit != bp_addr) fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n", bp_hit - &&label, nr); } } int main(int argc, const char *argv[]) { while (--argc) { int nr = atoi(*++argv); if (!fork()) test(nr); } while (wait(NULL) > 0) ; return 0; } Cc: stable@vger.kernel.org Suggested-by: NNadav Amit <namit@cs.technion.ac.il> Reported-by: NAndrey Wagin <avagin@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marc Zyngier 提交于
On an MMIO access, we always copy the on-stack buffer info the shared "run" structure, even if this is a read access. This ends up leaking up to 8 bytes of uninitialized memory into userspace, depending on the size of the access. An obvious fix for this one is to only perform the copy if this is an actual write. Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Valentin Rothberg 提交于
Previous Commit ("ARC: SMP: No need for CONFIG_ARC_IPI_DBG") removed the Kconfig option ARC_IPI_DBG. Remove the last reference on this option. Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
This was more relevant during SMP bringup. The warning for bogus msg better be visible always. Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
ARConnect/MCIP IPI sending has a retry-wait loop in case caller had not seen a previous such interrupt. Turns out that it is not needed at all. Linux cross core calling allows coalescing multiple IPIs to same receiver - it is fine as long as there is one. This logic is built into upper layer already, at a higher level of abstraction. ipi_send_msg_one() sets the actual msg payload, but it only calls MCIP IPI sending if msg holder was empty (using atomic-set-new-and-get-old construct). Thus it is unlikely that the retry-wait looping was ever getting exercised at all. Cc: Chuck Jordan <cjordan@synopsys.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
There is no real ARC700 based SMP SoC so remove IPI definition. EZChip's SMP ARC700 is going to use a different intc and IPI provider anyways. Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
ARConnect/MCIP Inter-Core-Interrupt module can't send interrupt to local core. So use core intc capability to trigger software interrupt to self, using an unsued IRQ #21. This showed up as csd deadlock with LTP trace_sched on a dual core system. This test acts as scheduler fuzzer, triggering all sorts of schedulting activity. Trouble starts with IPI to self, which doesn't get delivered (effectively lost due to H/w capability), but the msg intended to be sent remain enqueued in per-cpu @ipi_data. All subsequent IPIs to this core from other cores get elided due to the IPI coalescing optimization in ipi_send_msg_one() where a pending msg implies an IPI already sent and assumes other core is yet to ack it. After the elided IPI, other core simply goes into csd_lock_wait() but never comes out as this core never sees the interrupt. Fixes STAR 9001008624 Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> [4.2] Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fix from Mike Snitzer: "Fix a 112 byte leak for each IO request that is requeued while DM multipath is handling faults due to path failures. This leak does not happen if blk-mq DM multipath is used. It only occurs if .request_fn DM multipath is stacked ontop of blk-mq paths (e.g. scsi-mq devices)" * tag 'dm-4.5-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq paths
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC fix from Ulf Hansson: "Here's an mmc fix intended for v4.5 rc6. MMC host: - omap_hsmmc: Fix PM regression for deferred probe" * tag 'mmc-v4.5-rc4' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: omap_hsmmc: Fix PM regression with deferred probe for pm_runtime_reinit
-
由 Arnd Bergmann 提交于
A recent bugfix changed pfn_t to always be 64-bit wide, but did not change the code in pmem.c, which is now broken on 32-bit architectures as reported by gcc: In file included from ../drivers/nvdimm/pmem.c:28:0: drivers/nvdimm/pmem.c: In function 'pmem_alloc': include/linux/pfn_t.h:15:17: error: large integer implicitly truncated to unsigned type [-Werror=overflow] #define PFN_DEV (1ULL << (BITS_PER_LONG_LONG - 3)) This changes the intermediate pfn_flags in struct pmem_device to be 64 bit wide as well, so they can store the flags correctly. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: db78c222 ("mm: fix pfn_t vs highmem") Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Toshi Kani 提交于
devm_memremap() returns an ERR_PTR() value in case of error. However, it returns NULL when memremap() failed. This causes the caller, such as the pmem driver, to proceed and oops later. Change devm_memremap() to return ERR_PTR(-ENXIO) when memremap() failed. Signed-off-by: NToshi Kani <toshi.kani@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The original format of these commands from the "NVDIMM DSM Interface Example" [1] are superseded by the ACPI 6.1 definition of the "NVDIMM Root Device _DSMs" [2]. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf [2]: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf "9.20.7 NVDIMM Root Device _DSMs" Changes include: 1/ New 'restart' fields in ars_status, unfortunately these are implemented in the middle of the existing definition so this change is not backwards compatible. The expectation is that shipping platforms will only ever support the ACPI 6.1 definition. 2/ New status values for ars_start ('busy') and ars_status ('overflow'). Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: <stable@vger.kernel.org> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Stable bugfixes: - Fix nfs_size_to_loff_t - NFSv4: Fix a dentry leak on alias use Other bugfixes: - Don't schedule a layoutreturn if the layout segment can be freed immediately. - Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode - rpcrdma_bc_receive_call() should init rq_private_buf.len - fix stateid handling for the NFS v4.2 operations - pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page - fix panic in gss_pipe_downcall() in fips mode - Fix a race between layoutget and pnfs_destroy_layout - Fix a race between layoutget and bulk recalls" * tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.x/pnfs: Fix a race between layoutget and bulk recalls NFSv4.x/pnfs: Fix a race between layoutget and pnfs_destroy_layout auth_gss: fix panic in gss_pipe_downcall() in fips mode pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page nfs4: fix stateid handling for the NFS v4.2 operations NFSv4: Fix a dentry leak on alias use xprtrdma: rpcrdma_bc_receive_call() should init rq_private_buf.len pNFS: Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode pNFS: Fix pnfs_mark_matching_lsegs_return() nfs: fix nfs_size_to_loff_t
-