This is a preparation for a change to the type of v4l2 timestamps.
v4l2_get_timestamp() is a helper function that reads the monotonic
time and stores it into a 'struct timeval'. Multiple drivers implement
the same thing themselves for historic reasons.

Changing them all to use v4l2_get_timestamp() is more consistent
and reduces the amount of code duplication, and most importantly
simplifies the following changes.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
[hans.verkuil@cisco.com: dropped the v4l2-dev.c patch that didn't belong here]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:
	drivers/media/platform/s3c-camif/camif-capture.c:463 queue_setup() warn: variable dereferenced before check 'fmt' (see line 460)
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix these compiler warnings that appeared after switching to gcc-5.1.0:

drivers/media/platform/s3c-camif/camif-capture.c: In function 'sensor_set_power':
drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
  if (!on == camif->sensor.power_count)
          ^
drivers/media/platform/s3c-camif/camif-capture.c: In function 'sensor_set_streaming':
drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
  if (!on == camif->sensor.stream_count)
          ^
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If a subdevice pad op is called from a bridge driver, then there is
no v4l2_subdev_fh struct that can be passed to the subdevice. This
made it hard to use such subdevs from a bridge driver.

This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config
pointer in the pad ops. This allows bridge drivers to use the various
try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it
along to the pad op.

The v4l2_subdev_get_try_* macros had to be changed because of this, so
I also took the opportunity to use the full name of the v4l2_subdev_get_try_*
functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do
'git grep v4l2_subdev_get_try_format' you will actually find the header
where it is defined.

One remark regarding the drivers/staging/media/davinci_vpfe patches: the
*_init_formats() functions assumed that fh could be NULL. However, that's
not true for this driver, it's always set. This is almost certainly a copy
and paste from the omap3isp driver. I've updated the code to reflect the
fact that fh is never NULL.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Tested-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch drops driver specific wait_prepare() and
wait_finish() callbacks from vb2_ops and instead uses
the the helpers vb2_ops_wait_prepare/finish() provided
by the vb2 core, the lock member of the queue needs
to be initalized to a mutex so that vb2 helpers
vb2_ops_wait_prepare/finish() can make use of it.
Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The functions i2c_put_adapter() and release_firmware() test whether their
argument is NULL and then return immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.

Reference new definitions in all platform drivers.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

A platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

drivers/media//platform/s3c-camif/camif-capture.c: In function ‘camif_prepare_addr’:
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=]
  static struct _ddebug  __aligned(8)   \
                ^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
  DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
  ^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
  dynamic_pr_debug(fmt, ##__VA_ARGS__)
  ^
drivers/media//platform/s3c-camif/camif-capture.c:283:2: note: in expansion of macro ‘pr_debug’
  pr_debug("DMA address: y: %#x  cb: %#x cr: %#x\n",
  ^
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat=]
  static struct _ddebug  __aligned(8)   \
                ^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
  DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
  ^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
  dynamic_pr_debug(fmt, ##__VA_ARGS__)
  ^
drivers/media//platform/s3c-camif/camif-capture.c:283:2: note: in expansion of macro ‘pr_debug’
  pr_debug("DMA address: y: %#x  cb: %#x cr: %#x\n",
  ^
include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat=]
  static struct _ddebug  __aligned(8)   \
                ^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
  DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
  ^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
  dynamic_pr_debug(fmt, ##__VA_ARGS__)
  ^
drivers/media//platform/s3c-camif/camif-capture.c:283:2: note: in expansion of macro ‘pr_debug’
  pr_debug("DMA address: y: %#x  cb: %#x cr: %#x\n",
  ^
include/linux/dynamic_debug.h:64:16: warning: format ‘%X’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat=]
  static struct _ddebug  __aligned(8)   \
                ^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
  DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
  ^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
  dynamic_pr_debug(fmt, ##__VA_ARGS__)
  ^
drivers/media//platform/s3c-camif/camif-regs.c:217:2: note: in expansion of macro ‘pr_debug’
  pr_debug("dst_buf[%d]: %#X, cb: %#X, cr: %#X\n",
  ^
include/linux/dynamic_debug.h:64:16: warning: format ‘%X’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat=]
  static struct _ddebug  __aligned(8)   \
                ^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
  DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
  ^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
  dynamic_pr_debug(fmt, ##__VA_ARGS__)
  ^
drivers/media//platform/s3c-camif/camif-regs.c:217:2: note: in expansion of macro ‘pr_debug’
  pr_debug("dst_buf[%d]: %#X, cb: %#X, cr: %#X\n",
  ^
include/linux/dynamic_debug.h:64:16: warning: format ‘%X’ expects argument of type ‘unsigned int’, but argument 8 has type ‘dma_addr_t’ [-Wformat=]
  static struct _ddebug  __aligned(8)   \
                ^
include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’
  DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
  ^
include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’
  dynamic_pr_debug(fmt, ##__VA_ARGS__)
  ^
drivers/media//platform/s3c-camif/camif-regs.c:217:2: note: in expansion of macro ‘pr_debug’
  pr_debug("dst_buf[%d]: %#X, cb: %#X, cr: %#X\n",
  ^
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The bridge driver doesn't support interlaced formats, always return the
field order set to V4L2_FIELD_NONE.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Since all the drivers that use `struct v4l2_fh' use the core
priority checking, the setting of the flag in the drivers can
be removed.
Signed-off-by: NRamakrishnan Muthukrishnan <ramakrmu@cisco.com>
Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The vb2 core ignores any return code from the stop_streaming op.
And there really isn't anything it can do anyway in case of an error.
So change the return type to void and update any drivers that implement it.

The int return gave drivers the idea that this operation could actually
fail, but that's really not the case.

The pwc amd sdr-msi3101 drivers both had this construction:

        if (mutex_lock_interruptible(&s->v4l2_lock))
                return -ERESTARTSYS;

This has been updated to just call mutex_lock(). The stop_streaming op
expects this to really stop streaming and I very much doubt this will
work reliably if stop_streaming just returns without really stopping the
DMA.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The timestamp_type field used to contain only the timestamp type. Soon it
will be used for timestamp source flags as well. Rename the field
accordingly.

[m.chehab@samsung.com: do the change also to drivers/staging/media and at s2255]
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

I came across this while checking the kernel use of V4L2_CTRL_FLAG_DISABLED.

This flag should not be used with the control framework. Instead, just don't
add the control at all.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Because "i" is unsigned then "i-- >= 0" is always true.  If we don't
find what we are looking for then we loop forever.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

clk_unprepare checks for NULL pointer. Hence convert IS_ERR_OR_NULL
to IS_ERR only.
[s.nawrocki: added initialisation of the clock array to ERR_PTR() value]
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

dev_info is preferred to printk. Silences the related checkpatch
warning.
WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ...
then pr_info(...  to printk(KERN_INFO ...
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These symbols are local to the file and should be static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Function media_entity_remote_source actually returns the remote pad to
the given one, regardless if this is the source or the sink pad.
Name media_entity_remote_pad is more adequate for this function.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

'rotation' was an 8 bit variable and hence could not have values
greater than 255. Since we need higher values, change it to 16
bit type.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Ensure the driver gets always at least its minimum required
number of buffers allocated by checking actual number of
allocated buffers in vb2_reqbufs(). And free any partially
allocated buffer queue with signaling an error to user space.
Without this patch applications may wait forever to dequeue
a filled buffer, because the hardware didn't even start after
VIDIOC_STREAMON, VIDIOC_QBUF calls, due to insufficient number
of empty buffers.
Reported-by: NAlexander Nestorov <alexandernst@gmail.com>
Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Not all drivers use monotonic timestamps. This patch adds a way to set the
timestamp type per every queue.
In addition, set proper timestamp type in drivers that I am sure that use
either MONOTONIC or COPY timestamps. Other drivers will correctly report
UNKNOWN timestamp type instead of assuming that all drivers use monotonic
timestamps.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

versioncheck script complains about missing linux/version.h header
file.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds V4L2 driver for Samsung S3C24XX/S3C64XX SoC series
camera interface. The driver exposes a subdev device node for CAMIF
pixel resolution and crop control and two video capture nodes - for
the "codec" and "preview" data paths. It has been tested on Mini2440
(s3c2440) and Mini6410 (s3c6410) board with gstreamer and mplayer.
Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NAndrey Gusakov <dron0gus@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>