- 06 12月, 2013 4 次提交
-
-
由 Steffen Klassert 提交于
We now queue packets to the policy if the states are not yet resolved, this replaces the ancient sleeping code. Also the sleeping can cause indefinite task hangs if the needed state does not get resolved. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Fan Du 提交于
By semantics, xfrm layer is fully name space aware, so will the locks, e.g. xfrm_state/pocliy_lock. Ensure exclusive access into state/policy link list for different name space with one global lock is not right in terms of semantics aspect at first place, as they are indeed mutually independent with each other, but also more seriously causes scalability problem. One practical scenario is on a Open Network Stack, more than hundreds of lxc tenants acts as routers within one host, a global xfrm_state/policy_lock becomes the bottleneck. But onces those locks are decoupled in a per-namespace fashion, locks contend is just with in specific name space scope, without causing additional SPD/SAD access delay for other name space. Also this patch improve scalability while as without changing original xfrm behavior. Signed-off-by: NFan Du <fan.du@windriver.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Fan Du 提交于
because the home agent could surely be run on a different net namespace other than init_net. The original behavior could lead into inconsistent of key info. Signed-off-by: NFan Du <fan.du@windriver.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Fan Du 提交于
xfrm code always searches for unused policy index for newly created policy regardless whether or not user space policy index hint supplied. This patch enables such feature so that using "ip xfrm ... index=xxx" can be used by user to set specific policy index. Currently this beahvior is broken, so this patch make it happen as expected. Signed-off-by: NFan Du <fan.du@windriver.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 04 12月, 2013 1 次提交
-
-
由 Venkat Venkatsubra 提交于
After congestion update on a local connection, when rds_ib_xmit returns less bytes than that are there in the message, rds_send_xmit calls back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE) to trigger. For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually the message contains 8240 bytes. rds_send_xmit thinks there is more to send and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header) =4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k]. The commit 6094628b "rds: prevent BUG_ON triggering on congestion map updates" introduced this regression. That change was addressing the triggering of a different BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE: BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); This was the sequence it was going through: (rds_ib_xmit) /* Do not send cong updates to IB loopback */ if (conn->c_loopback && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) { rds_cong_map_updated(conn->c_fcong, ~(u64) 0); return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES; } rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time) = 8192 c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again and so on (c_xmit_data_off 24672,32912,41152,49392,57632) rds_ib_xmit returns 8240 On this iteration this sequence causes the BUG_ON in rds_send_xmit: while (ret) { tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off); [tmp = 65536 - 57632 = 7904] conn->c_xmit_data_off += tmp; [c_xmit_data_off = 57632 + 7904 = 65536] ret -= tmp; [ret = 8240 - 7904 = 336] if (conn->c_xmit_data_off == sg->length) { conn->c_xmit_data_off = 0; sg++; conn->c_xmit_sg++; BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); [c_xmit_sg = 1, rm->data.op_nents = 1] What the current fix does: Since the congestion update over loopback is not actually transmitted as a message, all that rds_ib_xmit needs to do is let the caller think the full message has been transmitted and not return partial bytes. It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb. And 64Kb+48 when page size is 64Kb. Reported-by: NJosh Hunt <joshhunt00@gmail.com> Tested-by: NHonggang Li <honli@redhat.com> Acked-by: NBang Nguyen <bang.nguyen@oracle.com> Signed-off-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2013 3 次提交
-
-
由 Kamala R 提交于
The behaviour of blackhole and prohibit routes has been corrected by setting the input and output pointers of the dst variable appropriately. For blackhole routes, they are set to dst_discard and to ip6_pkt_discard and ip6_pkt_discard_out respectively for prohibit routes. ipv6: ip6_pkt_prohibit(_out) should not depend on CONFIG_IPV6_MULTIPLE_TABLES We need ip6_pkt_prohibit(_out) available without CONFIG_IPV6_MULTIPLE_TABLES Signed-off-by: NKamala R <kamala@aristanetworks.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 François-Xavier Le Bail 提交于
Signed-off-by: NFrancois-Xavier Le Bail <fx.lebail@yahoo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Duan Jiong 提交于
when dealing with a RA message, if accept_ra_defrtr is false, the kernel will not add the default route, and then deal with the following route information options. Unfortunately, those options maybe contain default route, so let's judge the accept_ra_defrtr before calling rt6_route_rcv. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2013 3 次提交
-
-
由 Simon Wunderlich 提交于
When external CSA IEs are received (beacons or action messages), a channel switch is triggered as well. This should only be allowed on devices which actually support channel switches, otherwise disconnect. (For the corresponding userspace invocation, the wiphy flag is checked in nl80211). Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Simon Wunderlich 提交于
The channel switch announcement code has some major locking problems which can cause a deadlock in worst case. A series of fixes has been proposed, but these are non-trivial and need to be tested first. Therefore disable CSA completely for 3.13. Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 fan.du 提交于
commit a553e4a6 ("[PKTGEN]: IPSEC support") tried to support IPsec ESP transport transformation for pktgen, but acctually this doesn't work at all for two reasons(The orignal transformed packet has bad IPv4 checksum value, as well as wrong auth value, reported by wireshark) - After transpormation, IPv4 header total length needs update, because encrypted payload's length is NOT same as that of plain text. - After transformation, IPv4 checksum needs re-caculate because of payload has been changed. With this patch, armmed pktgen with below cofiguration, Wireshark is able to decrypted ESP packet generated by pktgen without any IPv4 checksum error or auth value error. pgset "flag IPSEC" pgset "flows 1" Signed-off-by: NFan Du <fan.du@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2013 6 次提交
-
-
由 stephen hemminger 提交于
Patch from developers of the alternative loss models, downloaded from: http://netgroup.uniroma2.it/twiki/bin/view.cgi/Main/NetemCLG "in case 2, of the switch we change the direction of the inequality to net_random()>clg->a3, because clg->a3 is h in the GE model and when h is 0 all packets will be lost." Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Patch from developers of the alternative loss models, downloaded from: http://netgroup.uniroma2.it/twiki/bin/view.cgi/Main/NetemCLG "In the case 1 of the switch statement in the if conditions we need to add clg->a4 to clg->a1, according to the model." Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
There is a missing break statement in the Gilbert Elliot loss model generator which makes state machine behave incorrectly. Reported-by: Martin Burri <martin.burri@ch.abb.com Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvid Brodin 提交于
This implements the rtnl_link_ops fill_info routine for HSR. Signed-off-by: NArvid Brodin <arvid.brodin@alten.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvid Brodin 提交于
Signed-off-by: NArvid Brodin <arvid.brodin@alten.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
IPv6 stats are 64 bits and thus are protected with a seqlock. By not disabling bottom-half we could deadlock here if we don't disable bh and a softirq reentrantly updates the same mib. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 11月, 2013 4 次提交
-
-
由 Eric Dumazet 提交于
In commit c9e90429 ("ipv4: fix possible seqlock deadlock") I left another places where IP_INC_STATS_BH() were improperly used. udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from process context, not from softirq context. This was detected by lockdep seqlock support. Reported-by: Njongman heo <jongman.heo@samsung.com> Fixes: 584bdf8c ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shawn Landden 提交于
Commit 35f9c09f (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Cc: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> # 3.4.x + 3.2.x Reported-and-tested-by: NShawn Landden <shawnlandden@gmail.com> Original-patch: Richard Weinberger <richard@nod.at> Signed-off-by: NShawn Landden <shawn@churchofgit.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
If kmsg->msg_namelen > sizeof(struct sockaddr_storage) then in the original code that would lead to memory corruption in the kernel if you had audit configured. If you didn't have audit configured it was harmless. There are some programs such as beta versions of Ruby which use too large of a buffer and returning an error code breaks them. We should clamp the ->msg_namelen value instead. Fixes: 1661bf36 ("net: heap overflow in __audit_sockaddr()") Reported-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Tested-by: NEric Wong <normalperson@yhbt.net> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently we're using plain spin_lock() in prb_shutdown_retire_blk_timer(), however the timer might fire right in the middle and thus try to re-aquire the same spinlock, leaving us in a endless loop. To fix that, use the spin_lock_bh() to block it. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") CC: "David S. Miller" <davem@davemloft.net> CC: Daniel Borkmann <dborkman@redhat.com> CC: Willem de Bruijn <willemb@google.com> CC: Phil Sutter <phil@nwl.cc> CC: Eric Dumazet <edumazet@google.com> Reported-by: NJan Stancek <jstancek@redhat.com> Tested-by: NJan Stancek <jstancek@redhat.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2013 5 次提交
-
-
由 Baker Zhang 提交于
since f9242b6b inet: Sanitize inet{,6} protocol demux. there are not pretended hash tables for ipv4 or ipv6 protocol handler. Signed-off-by: NBaker Zhang <Baker.kernel@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
In failure case, we should use kfree_skb not dev_kfree_skb to free skbuff, dev_kfree_skb is defined as consume_skb. Trace takes advantage of this point. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xufeng Zhang 提交于
Currently retransmitted DATA chunks could also be used for RTT measurements since there are no flag to identify whether the transmitted DATA chunk is a new one or a retransmitted one. This problem is introduced by commit ae19c548 ("sctp: remove 'resent' bit from the chunk") which inappropriately removed the 'resent' bit completely, instead of doing this, we should set the resent bit only for the retransmitted DATA chunks. Signed-off-by: NXufeng Zhang <xufeng.zhang@windriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
The pmcraid driver is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make it use the correct API, but since this may already be used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. My previous patch broke event delivery in the driver as I missed that it wasn't using the right API and forgot to update it later in my series. While changing this, I noticed that the genetlink code could use the static group ID instead of a strcmp(), so also do that for the VFS_DQUOT family. Cc: Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
net/netlink/genetlink.c: In function ‘genl_validate_assign_mc_groups’: net/netlink/genetlink.c:217: warning: ‘err’ may be used uninitialized in this function Commit 2a94fe48 ("genetlink: make multicast groups const, prevent abuse") split genl_register_mc_group() in multiple functions, but dropped the initialization of err. Initialize err to zero to fix this. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 11月, 2013 14 次提交
-
-
由 Karl Beldan 提交于
ATM, the first call of ieee80211_do_open will configure the hw as non-idle, even if the interface being brought up is not a monitor, and this leads to inconsistent sequences like: register_hw() do_open(sta) hw_config(non-idle) (.. sta is non-idle ..) scan(sta) hw_config(idle) (after scan finishes) do_stop(sta) do_open(sta) (.. sta is idle ..) Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Karl Beldan 提交于
Commit 3e8b1eb2 "mac80211/minstrel_ht: improve rate selection stability" introduced a local capped prob in minstrel_ht_calc_tp but omitted to use it to compute the per rate throughput. Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
Fixes wpa_supplicant p2p_find on 5GHz-only devices Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eliad Peller 提交于
Commit 392b9ffb ("mac80211: change beacon/connection polling") removed the IEEE80211_STA_BEACON_POLL flag. However, it accidentally removed the setting of IEEE80211_STA_CONNECTION_POLL, making the connection polling completely useless (the flag is always clear, so the result is never being checked). Fix it. Signed-off-by: NEliad Peller <eliad@wizery.com> Acked-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Chun-Yeow Yeoh 提交于
Mesh STA receiving the mesh CSA action frame is not able to trigger the mesh channel switch due to the incorrect handling and comparison of mesh channel switch parameters element (MCSP)'s TTL. Make sure the MCSP's TTL is updated accordingly before calling the ieee80211_mesh_process_chnswitch. Also, we update the beacon before forwarding the CSA action frame, so MCSP's precedence value and initiator flag need to be updated prior to this. Signed-off-by: NChun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Multicast frames can't be transmitted as part of an aggregation session (such a session couldn't even be set up) so don't try to reorder them. Trying to do so would cause the reorder to stop working correctly since multicast QoS frames (as transmitted by the Aruba APs this was found with) would cause sequence number confusion in the buffer. Cc: stable@vger.kernel.org Reported-by: NBlaise Gassend <blaise@suitabletech.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Due to nl80211 API breakage, 5/10 MHz support is broken for all drivers. Fixing it requires adding new API, but that can't be done as a bugfix commit since that would require either updating all APIs in the trees needing the bugfix or cause different kernels to have incompatible API. Therefore, just disable 5/10 MHz support for all drivers. Cc: stable@vger.kernel.org [3.12] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Karl Beldan 提交于
When initializing rates selections starting indexes upon stats update, the minstrel_sta->max_* rates should be 'group * MCS_GROUP_RATES + i' not 'i'. This affects settings where one of the peers does not support any of the rates of the group 0 (i.e. when ht_cap.mcs.rx_mask[0] == 0). Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Acked-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Javier Lopez 提交于
Mesh beacon was not being rebuild after user triggered a mesh powersave change. To solve this issue use ieee80211_mbss_info_change_notify instead of ieee80211_bss_info_change_notify. This helper function forces mesh beacon to be rebuild and then notifies the driver about the beacon change. Signed-off-by: NJavier Lopez <jlopex@cozybit.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
Commit "mac80211: implement SMPS for AP" applies to AP_VLAN as well. It assumes that sta->sdata->vif.bss_conf.bssid is present, which did not get set for AP_VLAN. Initialize it to sdata->vif.addr like for other interface types. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Coverity pointed out that we might dereference NULL later if nla_nest_start() returns a failure. This isn't really true since we'd bomb out before, but we should check the return value directly, so do that. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Coverity pointed out that in the (practically impossible) error case we leak the message - fix this. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Coverity pointed out that in a few functions we don't check the return value of the nla_put_*() calls. Most of these are fairly harmless because the input isn't very dynamic and controlled by the kernel, but the pattern is simply wrong, so fix this. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
When changing cfg80211 to use RTNL locking, this caused a deadlock in mac80211 as it calls cfg80211_sched_scan_stopped() from a work item that's on a workqueue that is flushed with the RTNL held. Fix this by simply using schedule_work(), the work only needs to finish running before the wiphy is unregistered, no other synchronisation (e.g. with suspend) is really required since for suspend userspace is already blocked anyway when we flush the workqueue so will only pick up the event after resume. Cc: stable@vger.kernel.org Fixes: 5fe231e8 ("cfg80211: vastly simplify locking") Reported-and-tested-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-