- 10 11月, 2010 2 次提交
-
-
由 Uwe Kleine-König 提交于
These are called by sa11x0_drv_pcmcia_probe (which is marked now with __devinit) so they can go to .devinit.text now, too. This fixes: WARNING: drivers/pcmcia/sa1100_cs.o(.text+0x10): Section mismatch in reference from the function sa11x0_drv_pcmcia_probe() to the function .init.text:pcmcia_simpad_init() The function sa11x0_drv_pcmcia_probe() references the function __init pcmcia_simpad_init(). This is often because sa11x0_drv_pcmcia_probe lacks a __init annotation or the annotation of pcmcia_simpad_init is wrong. and a similar warning for pcmcia_collie_init, pcmcia_cerf_init, pcmcia_h3600_init and pcmcia_shannon_init. While at it mark pcmcia_assabet_init with __devinit, too. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Russell King <linux@arm.linux.org.uk> CC: Eric Miao <eric.y.miao@gmail.com> CC: linux-arm-kernel@lists.infradead.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Komuro 提交于
pd6729: remove unnecessary space. Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 22 10月, 2010 1 次提交
-
-
由 Dominik Brodowski 提交于
Dave Hinds pointed out to me that 37979e15 will break b43 and ray_cs, as IOCARD is not -- as the name would suggest -- only needed for cards using IO ports. Instead, as it re-deines several pins, it is also required for using interrupts. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 18 10月, 2010 1 次提交
-
-
由 Justin P. Mattock 提交于
The patch below updates broken web addresses in the kernel Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: NBen Pfaff <blp@cs.stanford.edu> Acked-by: NHans J. Koch <hjk@linutronix.de> Reviewed-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 16 10月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
au100_generic and soc_common call flush_scheduled_work() spuriously. Remove them. This is to prepare for the deprecation and removal of flush_scheduled_work(). Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 15 10月, 2010 1 次提交
-
-
由 Wolfram Sang 提交于
Some cards need the speedups on, some need them off. As we can't detect this reliably, at least give the users a hint how to tweak the system. Reported-by: NDavid Bluecame <david.bluecame@gmail.com> Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 14 10月, 2010 1 次提交
-
-
由 Maciej Żenczykowski 提交于
pcmcia_socket_dev_resume() is only referenced from macro SET_SYSTEM_SLEEP_PM_OPS(NULL, pcmcia_socket_dev_resume) which based on CONFIG_PM_SLEEP may or may not actually use its second parameter. Signed-off-by: NMaciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 05 10月, 2010 1 次提交
-
-
由 Rahul Ruikar 提交于
- pci_release_regions called during return error path. - pci_disable_device called for cases where earlier it was enabled. - code duplication avoided/reduced by adding resource release at goto statements. Signed-off-by: NRahul Ruikar <rahul.ruikar@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 29 9月, 2010 14 次提交
-
-
由 Dominik Brodowski 提交于
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Remove this unnecessary message -- this info is either available in sysfs or by enabling dynamic debug from the PCMCIA core. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: linux-usb@vger.kernel.org Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Introduce an autoconfiguration feature to set certain values in pcmcia_loop_config(), instead of copying the same code over and over in each PCMCIA driver. At first, introduce the following options: CONF_AUTO_CHECK_VCC check or matching Vcc entry CONF_AUTO_SET_VPP set Vpp CONF_AUTO_AUDIO enable the speaker line CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Fill in missing descriptions and update some others for functions in pcmcia_resource.c. Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
pcmcia_enable_device() now replaces pcmcia_request_configuration(). Instead of config_req_t, all necessary flags are either passed as a parameter to pcmcia_enable_device(), or (in rare circumstances) set in struct pcmcia_device -> flags. With the last remaining user of include/pcmcia/cs.h gone, remove all references. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Several drivers prefer to explicitly set config_{base,index,regs}, formerly known as ConfigBase, ConfigIndex and Present. Instead of passing these values inside config_req_t, store it in struct pcmcia_device. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO (all other drivers). As this flags seems to relate to ioport access, make it conditional to the driver having requested IO port access. There are two drivers which do not request IO ports, but did set INT_MEMORY_AND_IO: ray_cs and b43. For those, we consistently only set INT_MEMORY in future. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
The Status (CISREG_CCSR) and ExtStatus (CISREG_ESR) registers were only accessed to enable audio output for some drivers and IRQ for serial_cs.c. The former also required setting config_req_t.Attributes to CONF_ENABLE_SPKR; the latter can be simplified to setting this field to CONF_ENABLE_ESR. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-scsi@vger.kernel.org Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
The "Pin" and "Copy" configuration registers (CISREG_SCR, CISREG_PPR) do not seem to be utilized anywhere. If a device would request a write to these registers, "0" would be written. Continue to do so, but warn of unexpected behavior -- and remove the "Pin" and "Copy" entries from config_req_t. Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Some drivers prefer to explicitly set Vpp. Instead of passing the voltage inside config_req_t, store it in struct pcmcia_device. CC: linux-ide@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-usb@vger.kernel.org CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
pcmcia_modify_configuration() was only used by two drivers to fix up one issue each: setting the Vpp to a different value, and reducing the IO width to 8 bit. Introduce two explicitly named functions handling these things, and remove one further typedef. CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Instead of win_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four iomem ranges. After a call to pcmcia_request_window(), the windows found there are reserved and may be used until pcmcia_release_window() is called. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 26 9月, 2010 1 次提交
-
-
由 Rahul Ruikar 提交于
In error return path call pci_disable_device() which was enabled earlier. Signed-off-by: NRahul Ruikar <rahul.ruikar@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 18 9月, 2010 1 次提交
-
-
由 Dominik Brodowski 提交于
If pcmcia_request_io() only fails partly -- for the second of two requested resources -- preserve the configuration settings for the first one. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 15 9月, 2010 1 次提交
-
-
由 Dominik Brodowski 提交于
As the iomem / ioport setup differs per device, it is much better to print out the device instead of the socket. Tested-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 06 8月, 2010 1 次提交
-
-
由 Grant Likely 提交于
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 8月, 2010 2 次提交
-
-
由 Manuel Lauss 提交于
Remove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done by MACH_ALCHEMY, now renamed to MIPS_ALCHEMY. Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1461/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Marek Vasut 提交于
This driver adds support for the on-board CF socket. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
-
- 03 8月, 2010 10 次提交
-
-
由 Dominik Brodowski 提交于
NR_IRQS may be as low as 16, causing a (harmless?) buffer overflow in pcmcia_setup_isa_irq(): static u8 pcmcia_used_irq[NR_IRQS]; ... if ((try < 32) && pcmcia_used_irq[irq]) continue; This is read-only, so if this address would be non-zero, it would just mean we would not attempt an IRQ >= NR_IRQS -- which would fail anyway! And as request_irq() fails for an irq >= NR_IRQS, the setting code path: pcmcia_used_irq[irq]++; is never reached as well. Reported-by: NChristoph Fritz <chf.fritz@googlemail.com> CC: stable@kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NChristoph Fritz <chf.fritz@googlemail.com>
-
由 Dominik Brodowski 提交于
Insert PCMCIA device resources into the resource tree. However, this is currently only implemented for sockets which do not statically map the resources. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Use struct resource * also for iomem resources. CC: linux-mtd@lists.infradead.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Page already had to be set to 0; Offset can easily be passed as parameter to pcmcia_map_mem_page. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Introduce a new field into struct pcmcia_device named "resource" and of type struct resource *, which contains the IO port ranges allocated for this device. Memory window ranges and registration with the resource trees will follow at a later date. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Remove some obsolete definitions from cs.h Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Use pcmcia_read_config_byte and pcmcia_write_config_byte instead of pcmcia_access_configuration_register. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 31 7月, 2010 2 次提交
-
-
由 Dominik Brodowski 提交于
Remove cs_types.h which is no longer needed: Most definitions aren't used at all, a few can be made away with, and two remaining definitions (typedefs, unfortunatley) may be moved to more specific places. CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
As we only provide one way to set up resources now, we can remove the resource-setup-related bitfield (except resource_setup_done). In addition, pcmcia_state only consisted of one entry, so remove this bitfield as well. Suggested-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-