- 20 2月, 2007 19 次提交
-
-
由 Richard Purdie 提交于
Remove a bogus SYSFS dependency from the backlight class Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Now update_status has locking, we can remove the mutex from corgi_bl. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Per device data such as brightness belongs to the indivdual device and should therefore be separate from the the backlight operation function pointers. This patch splits the two types of data and allows simplifcation of some code. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Move the setting/unsetting of pmac_backlight into the backlight core instead of doing it in each driver. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 James Simmons 提交于
Improve backlight selection for fbdev drivers Signed-off-by: NJames Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
fb_info->bl_mutex is badly thought out and the backlight class doesn't need it if the framebuffer/backlight register/unregister order is consistent, particularly after the backlight locking fixes. Fix the drivers to use the order: backlight_device_register() register_framebuffer() unregister_framebuffer() backlight_device_unregister() and turn bl_mutex into a lock for the bl_curve data only. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
The backlight core listens for blanking events and triggers a backlight_update_status call so these extra calls are not needed and can be removed. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Remove uneeded update_status call from chipsfb.c since the backlight core now receives software blanking notifications too. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
The backlight class wants notification whenever the console is blanked but doesn't get this when hardware blanking fails and software blanking is used. Changing FB_EVENT_BLANK to report both would be a behaviour change which could confuse the console layer so add a new event for software blanking and have the backlight class listen for both. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Currently its possible to build the backlight core as a module yet compile the drivers into the kernel which gives missing symbols. Fix. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
nvidia_bl_set_power isn't needed since the backlight class handles this by receiving fb events itself and calling update_status so remove it. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Convert internal semaphore to a mutex Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
backlight_device->sem has a very specific use as documented in the header file. The external users of this are using it for a different reason, to serialise access to the update_status() method. backlight users were supposed to implement their own internal serialisation of update_status() if needed but everyone is doing things differently and incorrectly. Therefore add a global mutex to take care of serialisation for everyone, once and for all. Locking for get_brightness remains optional since most users don't need it. Also update the lcd class in a similar way. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Since people use this code as an example, clean it up to to use platform_*_drvdata instead of a global variable. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Since people use this code as an example, clean it up to to use platform_*_drvdata and remove an unneeded function. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Dmitry Torokhov 提交于
Remove excessive numbers of (un)likely()s in the backlight core. There are no hot paths in this code so rely on compiler to do the right thing. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Remove uneeded owner field from backlight_properties structure. Nothing uses it and it is unlikely that it will ever be used. The backlight class uses other means to ensure that nothing references unloaded code. Based on a patch from Dmitry Torokhov <dtor@insightbb.com> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Dmitry Torokhov 提交于
Fix error handling when registering new device Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Marcin Juszkiewicz 提交于
Add control of LCD backlight for Frontpath ProGear HX1050+. Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz driver by M Schacht. Signed-off-by: NMarcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
- 17 2月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
The current driver is not setting the dev field in the private data structure, which can lead to an OOPS if the driver tries to report an error. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 2月, 2007 2 次提交
-
-
由 Thomas Gleixner 提交于
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 2月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
Declare the parent device of i2c_adapter devices each time we can easily do so. It makes the i2c_adapter appear at the right place in the device tree, rather than as a platform device. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Len Brown <len.brown@intel.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: v4l-dvb-maintainer@linuxtv.org Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
-
- 13 2月, 2007 17 次提交
-
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Add the PS3 Virtual Frame Buffer Driver. As the actual graphics hardware cannot be accessed directly by Linux, ps3fb uses a virtual frame buffer in main memory. The actual screen image is copied to graphics memory by the GPU on every vertical blank, by making a hypervisor call. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
fb_videomode_to_var(): reset the virtual screen parameters when converting from an fb_videomode to an fb_var_screeninfo. Without this the old virtual screen parameters are kept. Hence you cannot switch to a video mode with a lower resolution on frame buffer devices that don't support virtual screens and panning, as values are not supposed to be rounded down when they don't fit. I also reordered the assignments to match the order of the individual members. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
fbdev modedb: make more input and output pointer parameters const Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
fbdev modedb: Take into account the specified refresh rates for video modes specified by name, so e.g. all of `720p', `720p@60', and `720p@50' work. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Prarit Bhargava 提交于
Change nvidiafb_remove to __devexit to fix MODPOST warnings: WARNING: drivers/video/nvidia/nvidiafb.o - Section mismatch: reference to .exit.text:nvidiafb_remove from .data.rel.local after 'nvidiafb_driver' (at offset 0x28) Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Acked-By: NJames Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Use kzalloc instead of kmalloc + memset(0). Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Some of fb drivers uses atomic_t in bad manner, since there are still some race-prone gaps. Use mutexes to protect open/close code sections with ref_count testing and finally use simple uint. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Acked-by: NDenis Oliver Kropp <dok@directfb.org> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
The FB_S3TRIO driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
Use kzalloc instead of kmalloc+memset, twice. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Acked-By: NJames Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Knutsson 提交于
Convert: FALSE -> false TRUE -> true BOOLEAN -> bool Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Cc: Thomas Hellstrom <thomas@tungstengraphics.com> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Acked-by: NJames Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert P. J. Day 提交于
Replace the apparent typo CONFIG_ATY_CT with CONFIG_FB_ATY_CT. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Antonino A. Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Juergen Beisert reported that the following option doesn't work for him video=gx1fb:1024x768-16@60 though sisfb was able to parse similar option correctly. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
Add a proper prototype for tosh_smm() to include/linux/toshiba.h Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Woody Suwalski 提交于
The Netwinder machines with Cyber2010 crash badly when starting Xserver. The workaround is to disable pci burst option for this revision of video chip. [akpm@osdl.org: cleanup] Signed-off-by: NWoody Suwalski <woodys@xandros.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
Although gcc seems to accept "extern" prototypes after it has seen the "static inline" function, that's not really correct. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-