commit 747668dbc061b3e62bc1982767a3a1f9815fcf0e upstream.

The USB subsystem has always had an unusual requirement for its
scatter-gather transfers: Each element in the scatterlist (except the
last one) must have a length divisible by the bulk maxpacket size.
This is a particular issue for USB mass storage, which uses SG lists
created by the block layer rather than setting up its own.

So far we have scraped by okay because most devices have a logical
block size of 512 bytes or larger, and the bulk maxpacket sizes for
USB 2 and below are all <= 512.  However, USB 3 has a bulk maxpacket
size of 1024.  Since the xhci-hcd driver includes native SG support,
this hasn't mattered much.  But now people are trying to use USB-3
mass storage devices with USBIP, and the vhci-hcd driver currently
does not have full SG support.

The result is an overflow error, when the driver attempts to implement
an SG transfer of 63 512-byte blocks as a single
3584-byte (7 blocks) transfer followed by seven 4096-byte (8 blocks)
transfers.  The device instead sends 31 1024-byte packets followed by
a 512-byte packet, and this overruns the first SG buffer.

Ideally this would be fixed by adding better SG support to vhci-hcd.
But for now it appears we can work around the problem by
asking the block layer to respect the maxpacket limitation, through
the use of the virt_boundary_mask.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NSeth Bollinger <Seth.Bollinger@digi.com>
Tested-by: NSeth Bollinger <Seth.Bollinger@digi.com>
CC: Ming Lei <tom.leiming@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 764478f41130f1b8d8057575b89e69980a0f600d upstream.

Fix two long-standing bugs which could potentially lead to memory
corruption or leave the port throttled until it is reopened (on weakly
ordered systems), respectively, when read-URB completion races with
unthrottle().

First, the URB must not be marked as free before processing is complete
to prevent it from being submitted by unthrottle() on another CPU.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  process_urb();
	  smp_mb__before_atomic();
	  set_bit(i, free);		  if (test_and_clear_bit(i, free))
						  submit_urb();

Second, the URB must be marked as free before checking the throttled
flag to prevent unthrottle() on another CPU from failing to observe that
the URB needs to be submitted if complete() sees that the throttled flag
is set.

	CPU 1				CPU 2
	================		================
	complete()			unthrottle()
	  set_bit(i, free);		  throttled = 0;
	  smp_mb__after_atomic();	  smp_mb();
	  if (throttled)		  if (test_and_clear_bit(i, free))
		  return;			  submit_urb();

Note that test_and_clear_bit() only implies barriers when the test is
successful. To handle the case where the URB is still in use an explicit
barrier needs to be added to unthrottle() for the second race condition.

Also note that the first race was fixed by 36e59e0d ("cdc-acm: fix
race between callback and unthrottle") back in 2015, but the bug was
reintroduced a year later.

Fixes: 1aba579f ("cdc-acm: handle read pipe errors")
Fixes: 088c64f8 ("USB: cdc-acm: re-write read processing")
Signed-off-by: NJohan Hovold <johan@kernel.org>
Acked-by: NOliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 804dbee1e49774918339c1e5a87400988c0819e8 upstream.

The F81232 will use interrupt worker to handle MSR change.
This patch will fix the issue that interrupt work should stop
in close() and suspend().

This also fixes line-status events being disabled after a suspend cycle
until the port is re-opened.
Signed-off-by: NJi-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
[ johan: amend commit message ]
Fixes: 87fe5adc ("USB: f81232: implement read IIR/MSR with endpoint")
Cc: stable <stable@vger.kernel.org>	# 4.1
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d791929b2fbdf7734c1596d808e55cb457f4562 upstream.

The max possible value for DCTL.LPM_NYET_THRES is 15 and not 255. Change
the default value to 15.

Cc: stable@vger.kernel.org
Fixes: 80caf7d2 ("usb: dwc3: add lpm erratum support")
Signed-off-by: NThinh Nguyen <thinhn@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 59c39840f5abf4a71e1810a8da71aaccd6c17d26 ]

When irq_set_affinity_notifier() replaces the notifier, then the
reference count on the old notifier is dropped which causes it to be
freed. But nothing ensures that the old notifier is not longer queued
in the work list. If it is queued this results in a use after free and
possibly in work list corruption.

Ensure that the work is canceled before the reference is dropped.
Signed-off-by: NPrasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: marc.zyngier@arm.com
Link: https://lkml.kernel.org/r/1553439424-6529-1-git-send-email-psodagud@codeaurora.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3c677d206210f53a4be972211066c0f1cd47fe12 ]

The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register are treated as 0xfff by the
hardware for comparisons.

So correctly set the exclusion range in the hardware to the
last page which is _in_ the range.

Fixes: b2026aa2 ('x86, AMD IOMMU: add functions for programming IOMMU MMIO space')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1d54ad944074010609562da5c89e4f5df2f4e5db ]

Thomas-Mich Richter reported he triggered a WARN()ing from event_function_local()
on his s390. The problem boils down to:

	CPU-A				CPU-B

	perf_event_overflow()
	  perf_event_disable_inatomic()
	    @pending_disable = 1
	    irq_work_queue();

	sched-out
	  event_sched_out()
	    @pending_disable = 0

					sched-in
					perf_event_overflow()
					  perf_event_disable_inatomic()
					    @pending_disable = 1;
					    irq_work_queue(); // FAILS

	irq_work_run()
	  perf_pending_event()
	    if (@pending_disable)
	      perf_event_disable_local(); // WHOOPS

The problem exists in generic, but s390 is particularly sensitive
because it doesn't implement arch_irq_work_raise(), nor does it call
irq_work_run() from it's PMU interrupt handler (nor would that be
sufficient in this case, because s390 also generates
perf_event_overflow() from pmu::stop). Add to that the fact that s390
is a virtual architecture and (virtual) CPU-A can stall long enough
for the above race to happen, even if it would self-IPI.

Adding a irq_work_sync() to event_sched_in() would work for all hardare
PMUs that properly use irq_work_run() but fails for software PMUs.

Instead encode the CPU number in @pending_disable, such that we can
tell which CPU requested the disable. This then allows us to detect
the above scenario and even redirect the IPI to make up for the failed
queue.
Reported-by: NThomas-Mich Richter <tmricht@linux.ibm.com>
Tested-by: NThomas Richter <tmricht@linux.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b995dcca7cf12f208cfd95fd9d5768dca7cccec7 ]

It's used by probe and that isn't an init function. Drop this so that we
don't get a section mismatch.
Reported-by: Nkbuild test robot <lkp@intel.com>
Cc: David Müller <dave.mueller@gmx.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 7c2e07130090 ("clk: x86: Add system specific quirk to mark clocks as critical")
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 67f471b6ed3b09033c4ac77ea03f92afdb1989fe ]

This patch fixes a long-standing bug that initialized the FC-NVME
cmnd iu CSN value to 1. Early FC-NVME specs had the connection starting
with CSN=1. By the time the spec reached approval, the language had
changed to state a connection should start with CSN=0.  This patch
corrects the initialization value for FC-NVME connections.

Additionally, in reviewing the transport, the CSN value is assigned to
the new IU early in the start routine. It's possible that a later dma
map request may fail, causing the command to never be sent to the
controller.  Change the location of the assignment so that it is
immediately prior to calling the lldd. Add a comment block to explain
the impacts if the lldd were to additionally fail sending the command.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bf348f9b78d413e75bb079462751a1d86b6de36c ]

When tag_set->nr_maps is 1, the block layer limits the number of hw queues
by nr_cpu_ids. No matter how many hw queues are used by virtio-blk, as it
has (tag_set->nr_maps == 1), it can use at most nr_cpu_ids hw queues.

In addition, specifically for pci scenario, when the 'num-queues' specified
by qemu is more than maxcpus, virtio-blk would not be able to allocate more
than maxcpus vectors in order to have a vector for each queue. As a result,
it falls back into MSI-X with one vector for config and one shared for
queues.

Considering above reasons, this patch limits the number of hw queues used
by virtio-blk by nr_cpu_ids.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d6ba3f815bc5f3c4249d15c8bc5fbb012651b4a4 ]

Fix wrong setting on number of channels.  The context wants to set
constraint to 2 channels instead of 4.
Signed-off-by: NTzung-Bi Shih <tzungbi@google.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2ae2c3316fb77dcf64275d011596b60104c45426 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function.
drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function.
Signed-off-by: NWen Yang <wen.yang99@zte.com.cn>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5c2442fd78998af60e13aba506d103f7f43f8701 ]

If scsi cmd sglist is not suitable for DDP then csiostor driver uses
preallocated buffers for DDP, because of this data copy is required from
DDP buffer to scsi cmd sglist before calling ->scsi_done().
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4772e03d239484f3461e33c79d721c8ea03f7416 ]

Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page. This
patch fixes this problem.

 Unable to handle kernel paging request at virtual address ffff00006e3cd000
 ...
 Call trace:
  hns_roce_write_mtt+0x154/0x2f0 [hns_roce]
  hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce]
  hns_roce_create_srq+0x74c/0x808 [hns_roce]
  ib_create_srq+0x28/0xc8

Fixes: 0203b14c ("RDMA/hns: Unify the calculation for hem index in hip08")
Signed-off-by: Nchenglang <chenglang@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ea7a5c706fa49273cf6d1d9def053ecb50db2076 ]

Make sure to free the DSR on pvrdma_pci_remove() to avoid the memory leak.

Fixes: 29c8d9eb ("IB: Add vmw_pvrdma driver")
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Acked-by: NAdit Ranadive <aditr@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6a8aae68c87349dbbcd46eac380bc43cdb98a13b ]

If the msix_affinity_masks is alloced failed, then we'll
try to free some resources in vp_free_vectors() that may
access it directly.

We met the following stack in our production:
[   29.296767] BUG: unable to handle kernel NULL pointer dereference at  (null)
[   29.311151] IP: [<ffffffffc04fe35a>] vp_free_vectors+0x6a/0x150 [virtio_pci]
[   29.324787] PGD 0
[   29.333224] Oops: 0000 [#1] SMP
[...]
[   29.425175] RIP: 0010:[<ffffffffc04fe35a>]  [<ffffffffc04fe35a>] vp_free_vectors+0x6a/0x150 [virtio_pci]
[   29.441405] RSP: 0018:ffff9a55c2dcfa10  EFLAGS: 00010206
[   29.453491] RAX: 0000000000000000 RBX: ffff9a55c322c400 RCX: 0000000000000000
[   29.467488] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9a55c322c400
[   29.481461] RBP: ffff9a55c2dcfa20 R08: 0000000000000000 R09: ffffc1b6806ff020
[   29.495427] R10: 0000000000000e95 R11: 0000000000aaaaaa R12: 0000000000000000
[   29.509414] R13: 0000000000010000 R14: ffff9a55bd2d9e98 R15: ffff9a55c322c400
[   29.523407] FS:  00007fdcba69f8c0(0000) GS:ffff9a55c2840000(0000) knlGS:0000000000000000
[   29.538472] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.551621] CR2: 0000000000000000 CR3: 000000003ce52000 CR4: 00000000003607a0
[   29.565886] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   29.580055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   29.594122] Call Trace:
[   29.603446]  [<ffffffffc04fe8a2>] vp_request_msix_vectors+0xe2/0x260 [virtio_pci]
[   29.618017]  [<ffffffffc04fedc5>] vp_try_to_find_vqs+0x95/0x3b0 [virtio_pci]
[   29.632152]  [<ffffffffc04ff117>] vp_find_vqs+0x37/0xb0 [virtio_pci]
[   29.645582]  [<ffffffffc057bf63>] init_vq+0x153/0x260 [virtio_blk]
[   29.658831]  [<ffffffffc057c1e8>] virtblk_probe+0xe8/0x87f [virtio_blk]
[...]

Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: NLongpeng <longpeng2@huawei.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1a07a94b47b1f528f39c3e6187b5eaf02efe44ea ]

There are two problems here:

1. Not all clk_data->hws[] need to be initialized, depending on various
   configured quirks. This leads to NULL ptr deref in
   clk_hw_unregister_gate() in sun8i_tcon_top_unbind()
2. If there is error when registering the clk_data->hws[],
   err_unregister_gates error path will try to unregister
   IS_ERR()=true (invalid) pointer.

For problem (1) I have this stack trace:

Unable to handle kernel NULL pointer dereference at virtual
  address 0000000000000008
Call trace:
 clk_hw_unregister+0x8/0x18
 clk_hw_unregister_gate+0x14/0x28
 sun8i_tcon_top_unbind+0x2c/0x60
 component_unbind.isra.4+0x2c/0x50
 component_bind_all+0x1d4/0x230
 sun4i_drv_bind+0xc4/0x1a0
 try_to_bring_up_master+0x164/0x1c0
 __component_add+0xa0/0x168
 component_add+0x10/0x18
 sun8i_dw_hdmi_probe+0x18/0x20
 platform_drv_probe+0x3c/0x70
 really_probe+0xcc/0x278
 driver_probe_device+0x34/0xa8

Problem (2) was identified by head scratching.
Signed-off-by: NOndrej Jirman <megous@megous.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405233048.3823-1-megous@megous.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fcf88917dd435c6a4cb2830cb086ee58605a1d85 ]

The commit 510ded33 ("slab: implement slab_root_caches list")
changes the name of the list node within "struct kmem_cache" from "list"
to "root_caches_node", but leaks_show() still use the "list" which
causes a crash when reading /proc/slab_allocators.

You need to have CONFIG_SLAB=y and CONFIG_MEMCG=y to see the problem,
because without MEMCG all slab caches are root caches, and the "list"
node happens to be the right one.

Fixes: 510ded33 ("slab: implement slab_root_caches list")
Signed-off-by: NQian Cai <cai@lca.pw>
Reviewed-by: NTobin C. Harding <tobin@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4fa5ecda2bf96be7464eb406df8aba9d89260227 ]

This fixes the following warning seen on GCC 7.3:

  arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_regs()
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/3418ebf5a5a9f6ed7e80954c741c0b904b67b5dc.1554398240.git.jpoimboe@redhat.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 47c4cc08cb5b34e93ab337b924c5ede77ca3c936 ]

The chips main power supplies VA and VP are enabled during probe but
then never disabled, this will cause warnings from the regulator
framework on driver removal. Fix this by adding a remove callback and
disabling the supplies, whilst doing so follow best practice and put the
chip back into reset as well.
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c1cefe115d1cdc460014483319d440b2f0d07c68 ]

[Why]
the member sdr_white_level of struct dc_cursor_attributes was not
initialized, then the random value result that
dcn10_set_cursor_sdr_white_level() set error hw_scale value 0x20D9(normal
value is 0x3c00), this cause the black cursor issue.

[how]
just initilize the obj of struct dc_cursor_attributes to zero to avoid
the random value.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NTianci Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c85064435fe7a216ec0f0238ef2b8f7cd850a450 ]

This is because set_fmt ops maybe called when PD is off,
and in such case, regmap_ops will lead system hang.
enale PD before doing regmap_ops.
Signed-off-by: NSugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a0fe2c6479aab5723239b315ef1b552673f434a3 ]

Use parentheses around uses of the argument in u64_to_user_ptr() to
ensure that the cast doesn't apply to part of the argument.

There are existing uses of the macro of the form

  u64_to_user_ptr(A + B)

which expands to

  (void __user *)(uintptr_t)A + B

(the cast applies to the first operand of the addition, the addition
is a pointer addition). This happens to still work as intended, the
semantic difference doesn't cause a difference in behavior.

But I want to use u64_to_user_ptr() with a ternary operator in the
argument, like so:

  u64_to_user_ptr(A ? B : C)

This currently doesn't work as intended.
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190329214652.258477-1-jannh@google.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d7262457e35dbe239659e62654e56f8ddb814bed ]

Stephane reported that the TFA MSR is not initialized by the kernel,
but the TFA bit could set by firmware or as a leftover from a kexec,
which makes the state inconsistent.
Reported-by: NStephane Eranian <eranian@google.com>
Tested-by: NNelson DSouza <nelson.dsouza@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: tonyj@suse.com
Link: https://lkml.kernel.org/r/20190321123849.GN6521@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 583feb08e7f7ac9d533b446882eb3a54737a6dbb ]

When an event is programmed with attr.wakeup_events=N (N>0), it means
the caller is interested in getting a user level notification after
N samples have been recorded in the kernel sampling buffer.

With precise events on Intel processors, the kernel uses PEBS.
The kernel tries minimize sampling overhead by verifying
if the event configuration is compatible with multi-entry PEBS mode.
If so, the kernel is notified only when the buffer has reached its threshold.
Other PEBS operates in single-entry mode, the kenrel is notified for each
PEBS sample.

The problem is that the current implementation look at frequency
mode and event sample_type but ignores the wakeup_events field. Thus,
it may not be possible to receive a notification after each precise event.

This patch fixes this problem by disabling multi-entry PEBS if wakeup_events
is non-zero.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: https://lkml.kernel.org/r/20190306195048.189514-1-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2d85978341e6a32e7443d9f28639da254d53f400 ]

We don't want to overwrite "ret", it already holds the correct error
code.  The "regmap" variable might be a valid pointer as this point.

Fixes: 8f83f268 ("drm/mediatek: Add HDMI support")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c63adb28f6d913310430f14c69f0a2ea55eed0cc ]

The common pins were mistakenly not added to the DAPM graph.
Adding these pins will allow valid graphs to be created.
Signed-off-by: NAnnaliese McDermond <nh6z@nh6z.net>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ab8a6d821179ab9bea1a9179f535ccba6330c1ed ]

KGDB_call_nmi_hook is called by other cpu through smp call.
MIPS smp call is processed in ipi irq handler and regs is saved in
 handle_int.
So kgdb_call_nmi_hook get regs by get_irq_regs and regs will be passed
 to kgdb_cpu_enter.
Signed-off-by: NChong Qiao <qiaochong@loongson.cn>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Acked-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: QiaoChong <qiaochong@loongson.cn>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d0294344470e6b52d097aa7369173f32d11f2f52 ]

The receive side mapping (RSM) on hfi1 hardware is a special
matching mechanism to direct an incoming packet to a given
hardware receive context. It has 4 instances of matching capabilities
(RSM0 - RSM3) that share the same RSM table (RMT). The RMT has a total of
256 entries, each of which points to a receive context.

Currently, three instances of RSM have been used:
1. RSM0 by QOS;
2. RSM1 by PSM FECN;
3. RSM2 by VNIC.

Each RSM instance should reserve enough entries in RMT to function
properly. Since both PSM and VNIC could allocate any receive context
between dd->first_dyn_alloc_ctxt and dd->num_rcv_contexts, PSM FECN must
reserve enough RMT entries to cover the entire receive context index
range (dd->num_rcv_contexts - dd->first_dyn_alloc_ctxt) instead of only
the user receive contexts allocated for PSM
(dd->num_user_contexts). Consequently, the sizing of
dd->num_user_contexts in set_up_context_variables is incorrect.

Fixes: 2280740f ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support")
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a8639a79e85c18c16c10089edd589c7948f19bbd ]

When an old ack_queue entry is used to store an incoming request, it may
need to clean up the old entry if it is still referencing the
MR. Originally only RDMA READ request needed to reference MR on the
responder side and therefore the opcode was tested when cleaning up the
old entry. The introduction of tid rdma specific operations in the
ack_queue makes the specific opcode tests wrong.  Multiple opcodes (RDMA
READ, TID RDMA READ, and TID RDMA WRITE) may need MR ref cleanup.

Remove the opcode specific tests associated with the ack_queue.

Fixes: f48ad614 ("IB/hfi1: Move driver out of staging")
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 36a1da15b5df493241b0011d2185fdd724ac1ed1 ]

If CONFIG_OMAP4_DSS_HDMI_CEC is enabled in .config, deeper SoC idle
states are blocked because the CEC clock gets always enabled on init.

Let's fix the issue by moving the CEC clock handling to happen later in
hdmi_cec_adap_enable() as suggested by Hans Verkuil <hverkuil@xs4all.nl>.
This way the CEC clock gets only enabled when needed. This can be tested
by doing cec-ctl --playback to enable the CEC, and doing cec-ctl --clear
to disable it.

Let's also fix the typo for "divider" in the comments while at it.

Fixes: 8d7f934d ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support")
Suggested-by: NHans Verkuil <hverkuil@xs4all.nl>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Reviewed-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326151438.32414-1-tony@atomide.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cacea3a90e211f0c111975535508d446a4a928d2 ]

w_text_param can be NULL and it is being dereferenced without checking.
Add the missing sanity check to prevent  NULL pointer dereference.
Signed-off-by: NPankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f0f2338a9cfaf71db895fa989ea7234e8a9b471d ]

The CS4270 does not by default increment the register address on
consecutive writes. During normal operation it doesn't matter as all
register accesses are done individually. At resume time after suspend,
however, the regcache code gathers the biggest possible block of
registers to sync and sends them one on one go.

To fix this, set the INCR bit in all cases.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c47255b61129857b74b0d86eaf59335348be05e0 ]

Register platform component with a prefix, to avoid warnings
on debugfs entries creation, due to component name
redundancy.
Signed-off-by: NOlivier Moysan <olivier.moysan@st.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 19441e35a43b616ea6afad91ed0d9e77268d8f6a ]

The DFSDM must be stopped when a new setting is applied.
restart systematically DFSDM on multiple prepare calls,
to apply changes.
Signed-off-by: NOlivier Moysan <olivier.moysan@st.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9b70c697e87286ade406e6a02091757307dd4b7c ]

We want the video decoder clocks to always round to closest. While the
muxes are already using CLK_MUX_ROUND_CLOSEST, the corresponding
CLK_DIVIDER_ROUND_CLOSEST was forgotten for the dividers.

Fix this by adding the flag to the two vdec dividers.

Fixes: a565242e ("clk: meson: gxbb: add the video decoder clocks")
Signed-off-by: NMaxime Jourdan <mjourdan@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190319102537.2043-1-mjourdan@baylibre.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a2225a6d155fcb247fe4c6d87f7c91807462966d ]

Best to lock across handling the bus error to ensure the DSP doesn't
change power state as we are reading the status registers.
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1c5b6a27e432e4fe170a924c8b41012271496a4c ]

If ASRC turns on, HW will use clk_dac as the reference clock
whether recording or playback.
Both of clk_dac and clk_adc should set proper clock while using ASRC.
Signed-off-by: NShuming Fan <shumingf@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2b13bee3884926cba22061efa75bd315e871de24 ]

After commit fbeec965b8d1c ("ASoC: samsung: odroid: Fix 32000 sample rate
handling") the audio root clock frequency is configured improperly for
44100 sample rate. Due to clock rate rounding it's 20070401 Hz instead
of 22579000 Hz. This results in a too low value of the PSR clock divider
in the CPU DAI driver and too fast actual sample rate for fs=44100. E.g.
1 kHz tone has actual 1780 Hz frequency (1 kHz * 20070401/22579000 * 2).

Fix this by increasing the correction passed to clk_set_rate() to take
into account inaccuracy of the EPLL frequency properly.

Fixes: fbeec965b8d1c ("ASoC: samsung: odroid: Fix 32000 sample rate handling")
Reported-by: NJaeChul Lee <jcsing.lee@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 54d1cf78b0f4ba348a7c7fb8b7d0708d71b6cc8a ]

The driver changes the stream name of DAC and ADC to avoid the issue of
widget with prefixed name. When the machine adds prefixed name for codec,
the stream name of DAI may not find the widgets.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>