Atmel flash chips don't have PRI information in the same format as
AMD flash chips. This patch installs a fixup for all Atmel chips that
converts the relevant PRI fields into AMD format.

Only the fields that are actually used by the command set is actually
converted. The rest are initialized to zero (which should be safe)
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>

This patch removes some obvious dead code spotted by the Coverity
checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>

map/physmap.c tries to probe "cfi_probe", "jedec_probe" and "map_rom", but
map/Kconfig says it depends on MTD_CFI only.
This patch adds  MTD_JEDECPROBE and MTD_ROM to the dependency condition.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>

Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>

Fix of performance and stability issues on Intel NOR chips. It fixes:

1. Very low write performance on Sibley (perf tests demonstrated write
   performance less than 100Kb/sec when it should be over 400Kb/sec).

2. Low erase performance. (perf tests on Sibleuy demonstrated erase
   performance 246Kb/sec when it should be over 300Kb/sec).

3. Error on JFFS2 tests with CPU loading application when MTD returns
   "block erase error: (status timeout)" To fix the issue it does the
   following:
     1. Removes the timeout tuning from inval_cache_and_wait_for_operation.
     2. Waiting conditions in inval_cache_and_wait_for_operation now is
         based on timer resolution
        If timeout is lower than timer resolution then we do in cycle
	  "Checking the status"
	  udelay(1);
	  cond_resched();
        If timeout is greater than timer resolution (probably erase
        operation) We do the following
	  sleep for half of operation timeout and do in cycle the following
	    "Checking the status"
	    sleep for timer resolution
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NAlexey Korolev <akorolev@infradead.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Trying to pass kernel command line arguments to block2mtd at boot-time does
not work currently. block2mtd_setup() is called so early that kmalloc()
fails nevermind being able to do open_bdev_excl() (which requires rootfs to
be mounted. This patch only saves the option string at the early boot stage,
and parses them later when block2mtd_init() is called. If open_bdev_excl()
fails, open_by_devnum(name_to_dev_t()) is tried instead, which makes it
possible to initialize the driver before rootfs has been mounted. Also gets
rid of the superfluous parse_name() that only checks if name is longer than
80 chars and copies it to a string that is not kfreed.

With this patch, I can boot statically compiled block2mtd, and mount jffs2
as rootfs (without modules or initrd), with lilo config like this:

   root=/dev/mtdblock0
   append="rootfstype=jffs2 block2mtd.block2mtd=/dev/hdc2,65536"

(Note that rootfstype=jffs2 is required, since the kernel only tries
filesystems without "nodev" attribute by default, and jffs is "nodev").

Compared to first version of this patch, this one does not copy the
parameters to the global buffer if init has already been called, and the
global array is marked as __initdata.

Compared to the second version of this patch, module build is fixed.

Compared to the third version of this patch, statically compiled block2mtd
driver with no boot-time parameter no longer gives spurious error 'cannot
open device ""'
Signed-off-by: NVille Herva <vherva@vianova.fi>
Acked-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Spotted by liyu <liyu@ccoss.com.cn>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

PMC551 depends on PCI in Kconfig so there is no need to #error in code if PCI
is not set.
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

The CNE bits are inverted on the device and writeb function is missing a
NOT operation.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

In the case of data-pad-ecc-pad-data... layout the oob start position
has to be sizeof(data) in nand_write_oob_syndrom().

In nand_fill_oob() we need to copy to buf + buffer offset instead of
buf + write offset.

From: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch makes the needlessly global jffs2_obsolete_node_frag()
static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  Move workqueue exports to where the functions are defined.
  [CPUFREQ] Misc cleanups in ondemand.
  [CPUFREQ] Make ondemand sampling per CPU and remove the mutex usage in sampling path.
  [CPUFREQ] Add queue_delayed_work_on() interface for workqueues.
  [CPUFREQ] Remove slowdown from ondemand sampling path.

No devfs_fs.h header any more..
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.infradead.org/hdrinstall-2.6:
  Remove export of include/linux/isdn/tpam.h
  Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export
  Restrict headers exported to userspace for SPARC and SPARC64
  Add empty Kbuild files for 'make headers_install' in remaining arches.
  Add Kbuild file for Alpha 'make headers_install'
  Add Kbuild file for SPARC 'make headers_install'
  Add Kbuild file for IA64 'make headers_install'
  Add Kbuild file for S390 'make headers_install'
  Add Kbuild file for i386 'make headers_install'
  Add Kbuild file for x86_64 'make headers_install'
  Add Kbuild file for PowerPC 'make headers_install'
  Add generic Kbuild files for 'make headers_install'
  Basic implementation of 'make headers_check'
  Basic implementation of 'make headers_install'

There is a code sequence where the locking is substream->self_group.lock
-> ins->scbs[index].lock

substream->self_group.lock is interrupt safe, and taken from irq context
as well (trace is snipped for brevity)

so what can happen is

   cpu 0                   	cpu 1
   user context			user context

				take ins->scbs[index].lock without disabling interrupts

   get substream->self_group.lock (irqsafe)
   try to get ins->scbs[index].lock (spins)

				interrupt happens
				try to get substream->self_group.lock (spins)

which is an obvious AB-BA deadlock

fix is to just take the lock with _irqsafe
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mthca: initialize send and receive queue locks separately

lockdep identifies a lock by the call site of its initialization.  By
initializing the send and receive queue locks in mthca_wq_init() we confuse
lockdep.  It warns that that the ordered acquiry of both locks in
mthca_modify_qp() is recursive acquiry of one lock:

  =============================================
  [ INFO: possible recursive locking detected ]
  ---------------------------------------------
  modprobe/1192 is trying to acquire lock:
   (&wq->lock){....}, at: [<f892b4db>] mthca_modify_qp+0x60/0xa7b [ib_mthca]
  but task is already holding lock:
   (&wq->lock){....}, at: [<f892b4ce>] mthca_modify_qp+0x53/0xa7b [ib_mthca]

Initializing the locks separately in mthca_alloc_qp_common() stops the
warning and will let lockdep enforce proper ordering on paths that acquire
both locks.
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I found a bug in memory hot-add code for ia64.

IA64's code has copies of pgdat's array on each node to reduce memory
access over crossing node.  This array is used by NODE_DATA() macro.  When
new node is hot-added, this pgdat's array should be updated and copied on
new node too.

However, I used for_each_online_node() in scatter_node_data() to copy
it. This meant its array is not copied on new node.
Because initialization of structures for new node was halfway,
so online_node_map couldn't be set at this time.

To copy arrays on new node, I changed it to check value of pgdat_list[]
which is source array of copies.  I tested this patch with my Memory Hotadd
emulation on Tiger4.  This patch is for 2.6.17-git20.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix changed name of proc_task() to get_proc_task().
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (44 commits)
  ACPI: remove function tracing macros from drivers/acpi/*.c
  ACPI: add support for Smart Battery
  ACPI: handle battery notify event on broken BIOS
  ACPI: handle AC notify event on broken BIOS
  ACPI: asus_acpi: add S1N WLED control
  ACPI: asus_acpi: correct M6N/M6R display nodes
  ACPI: asus_acpi: add S1N WLED control
  ACPI: asus_acpi: rework model detection
  ACPI: asus_acpi: support L5D
  ACPI: asus_acpi: handle internal Bluetooth / support W5A
  ACPI: asus_acpi: support A4G
  ACPI: asus_acpi: support W3400N
  ACPI: asus_acpi: LED display support
  ACPI: asus_acpi: support A3G
  ACPI: asus_acpi: misc cleanups
  ACPI: video: Remove unneeded acpi_handle from driver.
  ACPI: thermal: Remove unneeded acpi_handle from driver.
  ACPI: power: Remove unneeded acpi_handle from driver.
  ACPI: pci_root: Remove unneeded acpi_handle from driver.
  ACPI: pci_link: Remove unneeded acpi_handle from driver.
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Ensure 8250_pci quirks are not marked __devinit
  [SERIAL] Convert fifosize to an unsigned int

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix lh7a40x_udc.c
  [ARM] Fix warning in consistent.c
  [ARM] Fix warnings in arch/arm/kernel/setup.c
  [ARM] Fix ecard.c resource warnings.
  [ARM] Fix ISA IRQ resources
  [ARM] Fix bad asm instruction in proc-arm925.S
  [ARM] More missing proc-macros.S includes
  [ARM] 3708/2: fix SMP build after section ioremap changes

* git://git.infradead.org/mtd-2.6:
  [JFFS2][XATTR] Fix memory leak in POSIX-ACL support
  fs/jffs2/: make 2 functions static
  [MTD] NAND: Fix broken sharpsl driver
  [JFFS2][XATTR] Fix xd->refcnt race condition
  MTD: kernel-doc fixes + additions
  MTD: fix all kernel-doc warnings
  [MTD] DOC: Fixup read functions and do a little cleanup

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  [Bluetooth] Add RFCOMM role switch support
  [Bluetooth] Allow disabling of credit based flow control
  [Bluetooth] Small cleanup of the L2CAP source code
  [Bluetooth] Use real devices for host controllers
  [Bluetooth] Add platform device for virtual and serial devices
  [Bluetooth] Add automatic sniff mode support
  [Bluetooth] Correct SCO buffer size on request
  [Bluetooth] Add suspend/resume support to the HCI USB driver
  [Bluetooth] Use raw mode for the Frontline sniffer device
  [BRIDGE]: br_dump_ifinfo index fix
  [ATM]: add+use poison defines
  [NET]: add+use poison defines
  [IOAT]: fix kernel-doc in source files
  [IOAT]: fix header file kernel-doc
  [TG3]: Add ipv6 TSO feature
  [IPV6]: Fix ipv6 GSO payload length
  [TIPC] Fixed sk_buff panic caused by tipc_link_bundle_buf (REVISED)
  [NET]: Verify gso_type too in gso_segment
  [IPVS]: Add sysctl documentation
  [ROSE]: Try all routes when establishing a ROSE connections.
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (57 commits)
  [SCSI] fix error handling in scsi_io_completion
  [SCSI] qla1280: fix section mismatch warnings
  [SCSI] mptsas: eliminate ghost devices
  [SCSI] qla2xxx: make some more functions static
  [SCSI] small whitespace cleanup for qlogic driver
  [SCSI] mptbase: mpt_interrupt should return IRQ_NONE
  [SCSI] mptsas: make two functions static
  [SCSI] sg.c: Fix bad error handling in
  [SCSI] 53c700: fix breakage caused by the autosense update
  [SCSI] iscsi: add async notification of session events
  [SCSI] iscsi: pass target nr to session creation
  [SCSI] iscsi: break up session creation into two stages
  [SCSI] iscsi: rm channel usage from iscsi
  [SCSI] iscsi: fix session refcouting
  [SCSI] iscsi: convert iscsi_tcp to new set/get param fns
  [SCSI] iscsi: convert iser to new set/get param fns
  [SCSI] iscsi: fixup set/get param functions
  [SCSI] iscsi: add target discvery event to transport class
  [SCSI] st: remove unused st_buffer.in_use
  [SCSI] atp870u: reduce huge stack usage
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: introduce utsrelease.h
  kbuild: explicit turn off gcc stack-protector

Jiri reports that the stop_machin kthread conversion caused his machine to
hang when suspending.  Hyperthreading is apparently involved.

I don't see why that would be and I can't reproduce it.  Revert to the 2.6.17
code.

Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

  =================================
  [ INFO: inconsistent lock state ]
  ---------------------------------
  inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
  swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
   (&adapter->fsf_req_list_lock){++..}, at: [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178
  {in-hardirq-W} state was registered at:
    [<000000000005fb0c>] __lock_acquire+0xad8/0xed0
    [<00000000000604ae>] lock_acquire+0x9a/0xc8
    [<000000000035a326>] _spin_lock+0x4e/0x68
    [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178
    [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430
    [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c
    [<000000000020229a>] do_adapter_IO+0xb2/0xc0
    [<0000000000206f32>] do_IRQ+0x136/0x16c
    [<0000000000020462>] io_no_vtime+0x16/0x1c
    [<0000000000019432>] cpu_idle+0x222/0x250
  irq event stamp: 129220
  hardirqs last  enabled at (129220): [<00000000000411e6>] tasklet_hi_action+0x5a/0x19c
  hardirqs last disabled at (129219): [<00000000000411c0>] tasklet_hi_action+0x34/0x19c
  softirqs last  enabled at (129212): [<0000000000040b62>] __do_softirq+0x13a/0x180
  softirqs last disabled at (129217): [<000000000001fd58>] do_softirq+0xec/0xf0

  other info that might help us debug this:
  no locks held by swapper/0.

  stack backtrace:
  00000000012bb670 0000000000000002 0000000000000000 00000000012bb780
         00000000012bb6e8 0000000000399122 0000000000399122 0000000000016b0a
         0000000000000000 0000000000000000 0000000000000000 00000000004660e8
         0000000000000000 000000000000000d 00000000012bb6e0 00000000012bb758
         0000000000368b90 0000000000016b0a 00000000012bb6e0 00000000012bb730
  Call Trace:
  ([<0000000000016a26>] show_trace+0x76/0xdc)
   [<0000000000016b2c>] show_stack+0xa0/0xd0
   [<0000000000016b8a>] dump_stack+0x2e/0x3c
   [<000000000005e3da>] print_usage_bug+0x27e/0x290
   [<000000000005ea9c>] mark_lock+0x6b0/0x6c0
   [<000000000005f33e>] __lock_acquire+0x30a/0xed0
   [<00000000000604ae>] lock_acquire+0x9a/0xc8
   [<000000000035a326>] _spin_lock+0x4e/0x68
   [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178
   [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430
   [<0000000000217bd2>] tiqdio_tl+0xd02/0x2120
   [<000000000004123a>] tasklet_hi_action+0xae/0x19c
   [<0000000000040ae4>] __do_softirq+0xbc/0x180
   [<000000000001fd58>] do_softirq+0xec/0xf0
   [<0000000000040c38>] irq_exit+0x90/0xa8
   [<0000000000206f40>] do_IRQ+0x144/0x16c
   [<0000000000020462>] io_no_vtime+0x16/0x1c
   [<0000000000019432>] cpu_idle+0x222/0x250
  ([<0000000000019416>] cpu_idle+0x206/0x250)
   [<000000000001405a>] rest_init+0x5a/0x68
   [<0000000000536998>] start_kernel+0x39c/0x3dc
   [<0000000000013046>] _stext+0x46/0x1000

Fix incorrect usage of fsf_req_list_lock. It's used in tasklet context
(irqs on) as well as in irq context. Therefore use the spin_lock_irqsave
variant to avoid deadlocks.
Acked-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

  =================================
  [ INFO: inconsistent lock state ]
  ---------------------------------
  inconsistent {hardirq-on-W} -> {in-hardirq-W} usage.
  swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
   (&adapter->erp_lock){+-..}, at: [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70
  {hardirq-on-W} state was registered at:
    [<000000000005f33e>] __lock_acquire+0x30a/0xed0
    [<00000000000604ae>] lock_acquire+0x9a/0xc8
    [<000000000035a7ae>] _write_lock+0x4e/0x68
    [<000000000026d822>] zfcp_erp_adapter_strategy_generic+0x286/0xd94
    [<000000000026fd72>] zfcp_erp_strategy_do_action+0x91e/0x1a94
    [<0000000000271a3a>] zfcp_erp_thread+0x21a/0x1568
    [<0000000000019096>] kernel_thread_starter+0x6/0xc
    [<0000000000019090>] kernel_thread_starter+0x0/0xc
  irq event stamp: 12078
  hardirqs last  enabled at (12077): [<0000000000019416>] cpu_idle+0x206/0x250
  hardirqs last disabled at (12078): [<0000000000020458>] io_no_vtime+0xc/0x1c
  softirqs last  enabled at (12072): [<0000000000040b62>] __do_softirq+0x13a/0x180
  softirqs last disabled at (12059): [<000000000001fd58>] do_softirq+0xec/0xf0

  other info that might help us debug this:
  no locks held by swapper/0.

  stack backtrace:
  00000000012bb648 0000000000000002 0000000000000000 00000000012bb758
         00000000012bb6c0 0000000000399122 0000000000399122 0000000000016b0a
         0000000000000000 0000000000000001 0000000000000000 00000000004660e8
         0000000000000000 000000000000000d 00000000012bb6b8 00000000012bb730
         0000000000368b90 0000000000016b0a 00000000012bb6b8 00000000012bb708
  Call Trace:
  ([<0000000000016a26>] show_trace+0x76/0xdc)
   [<0000000000016b2c>] show_stack+0xa0/0xd0
   [<0000000000016b8a>] dump_stack+0x2e/0x3c
   [<000000000005e3da>] print_usage_bug+0x27e/0x290
   [<000000000005e934>] mark_lock+0x548/0x6c0
   [<000000000005fb0c>] __lock_acquire+0xad8/0xed0
   [<00000000000604ae>] lock_acquire+0x9a/0xc8
   [<000000000035a662>] _write_lock_irqsave+0x62/0x80
   [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70
   [<0000000000279178>] zfcp_fsf_req_dispatch+0xd8/0x1fa8
   [<000000000027e538>] zfcp_fsf_req_complete+0x104/0xe4c
   [<0000000000274534>] zfcp_qdio_reqid_check+0xf4/0x178
   [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430
   [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c
   [<000000000020229a>] do_adapter_IO+0xb2/0xc0
   [<0000000000206f32>] do_IRQ+0x136/0x16c
   [<0000000000020462>] io_no_vtime+0x16/0x1c
   [<0000000000019432>] cpu_idle+0x222/0x250
  ([<0000000000019416>] cpu_idle+0x206/0x250)
   [<000000000001405a>] rest_init+0x5a/0x68
   [<0000000000536998>] start_kernel+0x39c/0x3dc
   [<0000000000013046>] _stext+0x46/0x1000

Fix incorrect usage of erp_lock. Using the write_lock() variant is wrong,
since this might lead to deadlocks.
Acked-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With recent change, if CONFIG_HOTPLUG_CPU is disabled,
register_cpu_notifier() is not exported.  And it breaked moduler msr/cpuid
(msr.c was already fixed).

We need to use register_hotcpu_notifier() now in module, instead of
register_cpu_notifier().
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds the support for RFCOMM role switching before the
connection is fully established.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds the module parameter disable_cfc which can be used to
disable the credit based flow control. The credit based flow control
was introduced with the Bluetooth 1.1 specification and devices can
negotiate its support, but for testing purpose it is helpful to allow
disabling of it.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch is a small cleanup of the L2CAP source code. It makes some
coding style changes and moves some functions around to avoid forward
declarations.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch converts the Bluetooth class devices into real devices. The
Bluetooth class is kept and the driver core provides the appropriate
symlinks for backward compatibility.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a generic Bluetooth platform device that can be used
as parent device by virtual and serial devices.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch introduces the automatic sniff mode feature. This allows
the host to switch idle connections into sniff mode to safe power.
Signed-off-by: NUlisses Furquim <ulissesf@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch introduces a quirk that allows the drivers to tell the host
to correct the SCO buffer size values.
Signed-off-by: NOlivier Galibert <galibert@pobox.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch implements the suspend/resume methods for the HCI USB
driver by killing all outstanding URBs on suspend, and re-issuing
them on resume.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Frontline sniffer device looks like a normal H:2 Bluetooth device,
but it is not and so mark it as raw mode device.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Fix for inability of br_dump_ifinfo to handle non-zero start index:
loop index never increases when entered with non-zero start.
Spotted by Kirill Korotaev.
Signed-off-by: NAndrey Savochkin <saw@swsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>