- 21 11月, 2014 3 次提交
-
-
由 Takashi Iwai 提交于
Introduce an internal helper macro for avoiding many open codes. The only slight behavior change is in a couple of get ballcks where the value is reset at error no matter whether ignore_ctl_error is set or not. Actually this is even safer than before. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
snd_nativeinstruments_control_get() uses a stack as a buffer for usb_control_msg(), but it's basically not allowed. Replace the call with a safer helper, snd_usb_ctl_msg(), instead. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 11月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
There are a few duplicated codes handling the mute and mic-mute LEDs via GPIO pins. Let's consolidate to single helpers. Here we introduced two new fields to alc_spec, gpio_mute_led_mask and gpio_mic_led_mask, to contain the bit mask to set/clear. Also, mute_led_polarity is evaluated as well. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 11月, 2014 1 次提交
-
-
由 Takashi Sakamoto 提交于
Complete missing parameters, correct wrong reference, and add an explaination about the differences between the latest specification and our implementation. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 11月, 2014 6 次提交
-
-
由 Hui Wang 提交于
The microphone mute led on the Latitude E5550 can't work. We need to apply DELL_WMI_MIC_MUTE_LED quirk to this machine. The machine uses alc293 codec and already applied the quirk ALC293_FIXUP_DELL1_MIC_NO_PRESENCE through pin_fixup_tbl[]. Here we just let DELL_WMI_MIC_MUTE_LED be chained to ALC269_FIXUP_HEADSET_MODE, then the machine will have these quirks ALC293_FIXUP_DELL1_MIC_NO_PRESENCE--> ALC269_FIXUP_HEADSET_MODE-->ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED. BugLink: https://bugs.launchpad.net/bugs/1381856Reported-and-tested-by: NPo-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hui Wang 提交于
We have one more Dell machine needs DELL_WMI_MIC_MUTE_LED quirk, but the machine uses alc293 instead of alc255. So if DELL_WMI_MIC_MUTE_LED still chain ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, the machine can't use this quirk. To change this situation, let the DELL_WMI_MIC_MUTE_LED to be a standalone quirk, and let other quirks chain it. After this change, this quirk can be chained to any existing quirks, and as a result, it is possible that this quirk is applied to a non-Dell machine or a Dell machine without mic mute led on it, but it is still safe since alc_fixup_dell_wmi() will return an error in these situations. And remove the quirk for machine with subsystem id 0x6010 and 0x601f, these two machines will fall back to the quirk ALC255_FIXUP_DELL1_MIC_NO_PRESENCE-->ALC255_FIXUP_HEADSET_MODE--> ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED through pin_fixup_tbl[]. BugLink: https://bugs.launchpad.net/bugs/1381856Reported-and-tested-by: NPo-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.18 As well as the usual driver fixes there's a few other things here: One is a fix for a race in DPCM which is unfortuantely a rather large diffstat, this is the result of growing usage of the mainline code and hence more detailed testing so I'm relatively happy. The other is a fix for non-DT machine driver matching following some of the componentization work which is much more focused. Both have had a while to cook in -next.
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/rt5670', 'asoc/fix/samsung' and 'asoc/fix/sgtl5000' into asoc-linus
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/adsp', 'asoc/fix/cs41l51', 'asoc/fix/dpcm', 'asoc/fix/es8328', 'asoc/fix/fsl-asrc', 'asoc/fix/max98090', 'asoc/fix/rcar', 'asoc/fix/rockchip' and 'asoc/fix/rt5645' into asoc-linus
-
由 Mark Brown 提交于
-
- 17 11月, 2014 19 次提交
-
-
由 Charles Keepax 提交于
We should not free any buffers associated with writing out coefficients to the DSP until all the async writes have completed. This patch updates the out of memory path when allocating a new buffer to include a call to regmap_async_complete. Reported-by: NJS Park <aitdark.park@samsung.com> Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
由 Johan Rastén 提交于
Specified in section 5.2.5.6.1 of the USB Audio Class 2.0 definition. Solves the following error for C-Media 6632A (Asus Xonar U7): [ 8219.676164] cannot get ctl value: req = 0x81, wValue = 0x0, wIndex = 0x1400, type = 3 Signed-off-by: NJohan Rastén <johan@oljud.se> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Markus Elfring 提交于
The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Markus Elfring 提交于
The release_firmware() function tests whether its argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Markus Elfring 提交于
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Markus Elfring 提交于
The snd_ac97_resume() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Markus Elfring 提交于
The functions kfree() and release_firmware() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Another small set of fixes: - some DT compatible typo fixes - irq setup fix dealing with irq storms on orion - i2c quirk generalization for mvebu - a handful of smaller fixes for OMAP - a couple of added file patterns for OMAP entries in MAINTAINERS" * tag 'armsoc-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: at91/dt: Fix sama5d3x typos pinctrl: dra: dt-bindings: Fix output pull up/down MAINTAINERS: Update entry for omap related .dts files to cover new SoCs MAINTAINERS: add more files under OMAP SUPPORT ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage ARM: dts: am335x-evm: Fix 5th NAND partition's name ARM: orion: Fix for certain sequence of request_irq can cause irq storm ARM: mvebu: armada xp: Generalize use of i2c quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: 1) Fix NULL oops in Schizo PCI controller error handler. 2) Fix race between xchg and other operations on 32-bit sparc, from Andreas Larsson. 3) swab*() helpers need a dummy memory input operand to show data flow on 64-bit sparc. 4) Fix RCU warnings due to missing irq_{enter,exit}() around generic_smp_call_function*() calls. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix constraints on swab helpers. sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locks sparc64: Do irq_{enter,exit}() around generic_smp_call_function*(). sparc64: Fix crashes in schizo_pcierr_intr_other().
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md bugfix from Neil Brown: "One fix for md for 3.18. This fixes a regression introduced in 3.13" * tag 'md/3.18-fix' of git://neil.brown.name/md: md: Always set RECOVERY_NEEDED when clearing RECOVERY_FROZEN
-
由 Peter Rosin 提交于
Some DT files had a typo with a missing "5" in sama5d3x first compatible string. Signed-off-by: NPeter Rosin <peda@axentia.se> [nicolas.ferre@atmel.com: modify commit log] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.18-rc4" from Tony Lindgren: Few omap fixes for hangs and wrong pinctrl defines, and update MAINTAINERS file to avoid missing PMIC and SoC related patches: - Fix random hangs on am437x because of incorrect default value for the DDR regulator - Fix wrong partition name for NAND on am335x-evm - Fix wrong pinctrl defines for dra7xx - Update maintainers entries for PMICs and SoCs * tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: pinctrl: dra: dt-bindings: Fix output pull up/down MAINTAINERS: Update entry for omap related .dts files to cover new SoCs MAINTAINERS: add more files under OMAP SUPPORT ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage ARM: dts: am335x-evm: Fix 5th NAND partition's name Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebu由 Olof Johansson 提交于
Merge "mvebu fixes for v3.18" from Jason Cooper: - Armada XP - Generalize i2c quirk - orion - Fix irq storm caused by specific sequence of request_irq * tag 'mvebu-fixes-3.18' of git://git.infradead.org/linux-mvebu: ARM: orion: Fix for certain sequence of request_irq can cause irq storm ARM: mvebu: armada xp: Generalize use of i2c quirk
-
由 NeilBrown 提交于
md_check_recovery will skip any recovery and also clear MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set. So when we clear _FROZEN, we must set _NEEDED and ensure that md_check_recovery gets run. Otherwise we could miss out on something that is needed. In particular, this can make it impossible to remove a failed device from an array is the 'recovery-needed' processing didn't happen. Suitable for stable kernels since 3.13. Cc: stable@vger.kernel.org (3.13+) Reported-and-tested-by: NJoe Lawrence <joe.lawrence@stratus.com> Fixes: 30b8feb7Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 David S. Miller 提交于
We are reading the memory location, so we have to have a memory constraint in there purely for the sake of showing the data flow to the compiler. Reported-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of six fixes and a MAINTAINER update. The fixes are two multipath (one in Test Unit Ready handling for the path checkers and one in the section of code that sends a start unit after failover; both of these were perturbed by the scsi-mq update), a CD-ROM door locking fix that was likewise introduced by scsi-mq and three driver fixes for a previous code update in cxgb4i, megaraid_sas and bnx2fc" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: bnx2fc: fix tgt spinlock locking megaraid_sas: fix bug in handling return value of pci_enable_msix_range() cxgb4i: send abort_rpl correctly cxgbi: add maintainer for cxgb3i/cxgb4i scsi: TUR path is down after adapter gets reset with multipath scsi: call device handler for failed TUR command scsi: only re-lock door after EH on devices that were reset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Microcode fixes, a Xen fix and a KASLR boot loading fix with certain memory layouts" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Fix ucode patch stashing on 32-bit x86/core, x86/xen/smp: Use 'die_complete' completion when taking CPU down x86, microcode: Fix accessing dis_ucode_ldr on 32-bit x86, kaslr: Prevent .bss from overlaping initrd x86, microcode, AMD: Fix early ucode loading on 32-bit
-
由 Linus Torvalds 提交于
Al Viro pointed out that the x86-64 csum_partial_copy_from_user() is somewhat confused about what it should do on errors, notably it mostly clears the uncopied end result buffer, but misses that for the initial alignment case. All users should check for errors, so it's dubious whether the clearing is even necessary, and Al also points out that we should probably clean up the calling conventions, but regardless of any future changes to this function, the fact that it is inconsistent is just annoying. So make the __get_user() failure path use the same error exit as all the other errors do. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 11月, 2014 7 次提交
-
-
由 Jurgen Kramer 提交于
This patch adds a USB control message delay quirk for a few specific Marantz/Denon devices. Without the delay the DACs will not work properly and produces the following type of messages: Nov 15 10:09:21 orwell kernel: [ 91.342880] usb 3-13: clock source 41 is not valid, cannot use Nov 15 10:09:21 orwell kernel: [ 91.343775] usb 3-13: clock source 41 is not valid, cannot use There are likely other Marantz/Denon devices using the same USB module which exhibit the same problems. But as this cannot be verified I limited the patch to the devices I could test. The following two devices are covered by this path: - Marantz SA-14S1 - Marantz HD-DAC1 Signed-off-by: NJurgen Kramer <gtmkramer@xs4all.nl> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Two fixes this time, one to ensure that the kuser helper option depends on MMU as they aren't available for noMMU targets (and if the option is selected, we end up oopsing.) The second fix plugs a corner case with the decompressor, ensuring that the instruction stream can see the relocated code in every case on ARMv7 CPUs" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8198/1: make kuser helpers depend on MMU ARM: 8191/1: decompressor: ensure I-side picks up relocated code
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: "Changes include: - wire up the bpf syscall - remove CONFIG_64BIT usage from some userspace-exported header files - use compat functions for msgctl, shmat, shmctl and semtimedop syscalls" * 'parisc-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Avoid using CONFIG_64BIT in userspace exported headers parisc: Use compat layer for msgctl, shmat, shmctl and semtimedop syscalls parisc: Use BUILD_BUG() instead of undefined functions parisc: Wire up bpf syscall
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
Pull power supply updates from Sebastian Reichel: "Power supply and reset changes for the v3.18-rc: - misc. charger-manager fixes - year 2038 fix in ab8500_fg - fix error handling of bq2415x_charger" * tag 'for-v3.18-rc' of git://git.infradead.org/battery-2.6: power: charger-manager: Fix accessing invalidated power supply after charger unbind power: charger-manager: Fix accessing invalidated power supply after fuel gauge unbind power: charger-manager: Avoid recursive thermal get_temp call power_supply: Add no_thermal property to prevent recursive get_temp calls power: bq2415x_charger: Fix memory leak on DTS parsing error power: bq2415x_charger: Properly handle ENODEV from power_supply_get_by_phandle power: ab8500_fg.c: use 64-bit time types
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm gixes from Dave Airlie: - exynos: infinite loop regressions fixed - i915: one regression - radeon: one race condition on monitor probing - noveau: two regressions - tegra: one vblank regression fix * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/tegra: dc: Add missing call to drm_vblank_on() drm/nouveau/nv50/disp: Fix modeset on G94 drm/gk20a/fb: fix setting of large page size bit drm/radeon: add locking around atombios scratch space usage drm/i915: Fix obj->map_and_fenceable across tiling changes drm/exynos: fix possible infinite loop issue drm/exynos: g2d: fix null pointer dereference drm/exynos: resolve infinite loop issue on non multi-platform drm/exynos: resolve infinite loop issue on multi-platform
-
由 Kirill A. Shutemov 提交于
Sasha Levin reports: "gcc5 changes the default standard to c11, which makes kernel build unhappy Explicitly define the kernel standard to be gnu89 which should keep everything working exactly like it was before gcc5" There are multiple small issues with the new default, but the biggest issue seems to be that the old - and very useful - GNU extension to allow a cast in front of an initializer has gone away. Patch updated by Kirill: "I'm pretty sure all gcc versions you can build kernel with supports -std=gnu89. cc-option is redunrant. We also need to adjust HOSTCFLAGS otherwise allmodconfig fails for me" Note by Andrew Pinski: "Yes it was reported and both problems relating to this extension has been added to gnu99 and gnu11. Though there are other issues with the kernel dealing with extern inline have different semantics between gnu89 and gnu99/11" End result: we may be able to move up to a newer stdc model eventually, but right now the newer models have some annoying deficiencies, so the traditional "gnu89" model ends up being the preferred one. Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Singed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - stable patches to fix NFSv4.x delegation reclaim error paths - fix a bug whereby we were advertising NFSv4.1 but using NFSv4.2 features - fix a use-after-free problem with pNFS block layouts - fix a memory leak in the pNFS files O_DIRECT code - replace an intrusive and Oops-prone performance fix in the NFSv4 atomic open code with a safer one-line version and revert the two original patches" * tag 'nfs-for-3.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: sunrpc: fix sleeping under rcu_read_lock in gss_stringify_acceptor NFS: Don't try to reclaim delegation open state if recovery failed NFSv4: Ensure that we call FREE_STATEID when NFSv4.x stateids are revoked NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return NFSv4.1: nfs41_clear_delegation_stateid shouldn't trust NFS_DELEGATED_STATE NFSv4: Ensure that we remove NFSv4.0 delegations when state has expired NFS: SEEK is an NFS v4.2 feature nfs: Fix use of uninitialized variable in nfs_getattr() nfs: Remove bogus assignment nfs: remove spurious WARN_ON_ONCE in write path pnfs/blocklayout: serialize GETDEVICEINFO calls nfs: fix pnfs direct write memory leak Revert "NFS: nfs4_do_open should add negative results to the dcache." Revert "NFS: remove BUG possibility in nfs4_open_and_get_state" NFSv4: Ensure nfs_atomic_open set the dentry verifier on ENOENT
-
- 15 11月, 2014 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem updates from Dmitry Torokhov: "Mostly small fixups to PS/2 tochpad drivers (ALPS, Elantech, Synaptics) to better deal with specific hardware" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - update the documentation Input: elantech - provide a sysfs knob for crc_enabled Input: elantech - report the middle button of the touchpad Input: alps - ignore bad data on Dell Latitudes E6440 and E7440 Input: alps - allow up to 2 invalid packets without resetting device Input: alps - ignore potential bare packets when device is out of sync Input: elantech - fix crc_enabled for Fujitsu H730 Input: elantech - use elantech_report_trackpoint for hardware v4 too Input: twl4030-pwrbutton - ensure a wakeup event is recorded. Input: synaptics - add min/max quirk for Lenovo T440s
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - fix EFI stub cache maintenance causing aborts during boot on certain platforms - handle byte stores in __clear_user without panicking - fix race condition in aarch64_insn_patch_text_sync() (instruction patching) - Couple of type fixes * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ARCH_PFN_OFFSET should be unsigned long Correct the race condition in aarch64_insn_patch_text_sync() arm64: __clear_user: handle exceptions on strb arm64: Fix data type for physical address arm64: efi: Fix stub cache maintenance
-
由 Linus Torvalds 提交于
Merge tag 'platform-drivers-x86-v3.18-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform drivers fixlets from Darren Hart: "Just two patches to remove hp_accel events from the keyboard bus stream via an i8042 filter" * tag 'platform-drivers-x86-v3.18-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform: hp_accel: Add SERIO_I8042 as a dependency since it now includes i8042.h/serio.h platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream
-