- 30 9月, 2005 4 次提交
-
-
由 Roland McGrath 提交于
Any tests using < TASK_STOPPED or the like are left over from the time when the TASK_ZOMBIE and TASK_DEAD bits were in the same word, and it served to check for "stopped or dead". I think this one in do_signal_stop is the only such case. It has been buggy ever since exit_state was separated, and isn't testing the exit_state value. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Roland points out that the flags end up having non-obvious dependencies elsewhere, so revert aa55a086 and add some comments about why things are as they are. We'll just have to fix up the broken comparisons. Roland has a patch. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
do_signal_stop: for_each_thread(t) { if (t->state < TASK_STOPPED) ++sig->group_stop_count; } However, TASK_NONINTERACTIVE > TASK_STOPPED, so this loop will not count TASK_INTERRUPTIBLE | TASK_NONINTERACTIVE threads. See also wait_task_stopped(), which checks ->state > TASK_STOPPED. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> [ We really probably should always use the appropriate bitmasks to test task states, not do it like this. Using something like #define TASK_RUNNABLE (TASK_RUNNING | TASK_INTERRUPTIBLE | \ TASK_UNINTERRUPTIBLE | TASK_NONINTERACTIVE) and then doing "if (task->state & TASK_RUNNABLE)" or similar. But the ordering of the task states is historical, and keeping the ordering does make sense regardless. ] Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
- 29 9月, 2005 29 次提交
-
-
由 Deepak Saxena 提交于
Previous patch accidently add IXDP425 mach entry when IXDP465 is configured. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Deepak Saxena 提交于
Missing ';' breaks module build. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ben Dooks 提交于
The function s3c2410fb_activate_var does not return a value, therefore it should be declared void. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
- Workaround for the ioremap patch that produces a blank display on some chipsets - Make hwcursor = 0 the default. The hardware cursor does not work with all hardware. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
- use nonseekable_open() instead of messing with if (*ppos != file->f_pos) return -EISPIPE in ->write() (->read is NULL). - trivial __user annotations Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
In arch/ppc/boot/ld.script we need OUTPUT_ARCH(powerpc:common) for the same reasons why we need it in vmlinux.lds.S; when we build on ppc64 box, we need to be explicit about the target. See http://linus.bkbits.net:8080/linux-2.5/cset@1.1784.8.10 for the corresponding fix in vmlinux.lds.S. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
long is not uintptr_t, unsigned long is. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
- document places where we pass kernel address to low-level primitive that deals with kernel/user addresses - uintptr_t is unsigned long, not long Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NKnut Petersen <Knut_Petersen@t-online.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
- print pointers with %p - casting pointer structure field to int and printing it with %d... Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
A bunch of create_proc_dir_entry() calls creating directories had crept in since the last sweep; converted to proc_mkdir(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
UML makefiles sanitized: - number of generated headers reduced to 2 (from user-offsets.c and kernel-offsets.c resp.). The rest is made constant and simply includes those two. - mk_... helpers are gone now that we don't need to generate these headers - arch/um/include2 removed since everything under arch/um/include/sysdep is constant now and symlink can point straight to source tree. - dependencies seriously simplified. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David S. Miller 提交于
I got the second compare_eth_addr() test reversed, oops. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The in-memory value was being swapped, not the value we loaded into the register. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Whitaker 提交于
From: Martin Whitaker <atm@martin-whitaker.co.uk> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
-
由 Roman Kagan 提交于
Signed-off-by: NRoman Kagan <rkagan@mail.ru> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
-
由 David S. Miller 提交于
Match it up to what RFC2414 really specifies. Noticed by Rick Jones. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dominik Brodowski 提交于
Only start up nonstatic sockets if both IO and MEM resources are available. Thanks to Russell King and Matthew Wilcox for tracking this down. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Allow for excluding only one port in /etc/pcmcia/config.otps Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 David Howells 提交于
The attached patch adds extra permission grants to keys for the possessor of a key in addition to the owner, group and other permissions bits. This makes SUID binaries easier to support without going as far as labelling keys and key targets using the LSM facilities. This patch adds a second "pointer type" to key structures (struct key_ref *) that can have the bottom bit of the address set to indicate the possession of a key. This is propagated through searches from the keyring to the discovered key. It has been made a separate type so that the compiler can spot attempts to dereference a potentially incorrect pointer. The "possession" attribute can't be attached to a key structure directly as it's not an intrinsic property of a key. Pointers to keys have been replaced with struct key_ref *'s wherever possession information needs to be passed through. This does assume that the bottom bit of the pointer will always be zero on return from kmem_cache_alloc(). The key reference type has been made into a typedef so that at least it can be located in the sources, even though it's basically a pointer to an undefined type. I've also renamed the accessor functions to be more useful, and all reference variables should now end in "_ref". Signed-Off-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 9月, 2005 7 次提交
-
-
由 Paul Jackson 提交于
Don't leak a page of memory if user reads a cpuset file past eof. Signed-off-by: NKUROSAWA Takahiro <kurosawa@valinux.co.jp> Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Alok N Kataria 提交于
In kmalloc_node we are checking if the allocation is for the same node when interrupts are "on". This may lead to an allocation on another node than intended. This patch just shifts the check for the current node in __cache_alloc_node when interrupts are disabled. Signed-off-by: NAlok N Kataria <alokk@calsoftinc.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
My previous patch fixing invalidation of huge PTEs wasn't good enough, we still had an issue if a PTE invalidation batch contained both small and large pages. This patch fixes this by making sure the batch is flushed if the page size fed to it changes. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
When creating a multipath device, if the queue_if_no_path parameter is specified it gets ignored. While the queue_if_no_path variable is correctly set to 1, the saved_queue_if_no_path gets set to 0. When the device is subsequently made live (resumed), the saved value (0) always overwrites the live value (1) so the option *always* gets turned off. The fix adds a parameter to the queue_if_no_path() function to indicate whether the previous value should be preserved or not - if not, as when the device is being set up, the saved value is set to the new value (1). Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 goggin, edward 提交于
If anything is waiting on a device's table when the device is removed, we must first wake it up so it will release its reference. Otherwise the table's reference count will not drop to zero and the table will not get removed. Signed-Off-By: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
The following patch makes swsusp avoid problems during resume if there are too many pages to save on suspend. It adds a constant that allows us to verify if we are going to save too many pages and implements the check (this is done as early as we can tell that the check will trigger, which is in swsusp_alloc()). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-