These objects are set during initialization, thereafter are read only.

Previously I only want to mark vdso_pages, vdso_spec, vectors_page and
cpu_ops as __read_mostly from performance point of view. Then inspired
by Kees's patch[1] to apply more __ro_after_init for arm, I think it's
better to mark them as __ro_after_init. What's more, I find some more
objects are also read only after init. So apply __ro_after_init to all
of them.

This patch also removes global vdso_pagelist and tries to clean up
vdso_spec[] assignment code.

[1] http://www.spinics.net/lists/arm-kernel/msg523188.htmlAcked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The vm_special_mapping spec which is used for aarch32 vectors page is
never modified, so mark it as const.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

It is not needed after booting, this patch moves the alloc_vectors_page
function to the __init section.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

HAVE_CLK is select'ed by CLKDEV_LOOKUP, which is select'ed by
COMMON_CLK, which is select'ed by ARM64.  No sub-architecture
needs to select HAVE_CLK explicitly.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Even though perf_ops_bp was removed/renamed back in commit
b0a873eb ("perf: Register PMU implementations"), as part of
v2.6.37, its definition still lives on in some arch headers.

This patch removes the vestigal definition from arm64.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Use the builtin_platform_driver() to simplify code.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

__dma_* routines have been converted to use start and size instread of
start and end addresses. The patch was origianlly for adding
__clean_dcache_area_poc() which will be used in pmem driver to clean
dcache to the PoC(Point of Coherency) in arch_wb_cache_pmem().

The functionality of __clean_dcache_area_poc()  was equivalent to
__dma_clean_range(). The difference was __dma_clean_range() uses the end
address, but __clean_dcache_area_poc() uses the size to clean.

Thus, __clean_dcache_area_poc() has been revised with a fallthrough
function of __dma_clean_range() after the change that __dma_* routines
use start and size instead of using start and end.

As a consequence of using start and size, the name of __dma_* routines
has also been altered following the terminology below:
    area: takes a start and size
    range: takes a start and end
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NKwangwoo Lee <kwangwoo.lee@sk.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently ret_fast_syscall, work_pending, and ret_to_user form an ad-hoc
state machine that can be difficult to reason about due to duplicated
code and a large number of branch targets.

This patch factors the common logic out into the existing
do_notify_resume function, converting the code to C in the process,
making the code more legible.

This patch tries to closely mirror the existing behaviour while using
the usual C control flow primitives. As local_irq_{disable,enable} may
be instrumented, we balance exception entry (where we will almost most
likely enable IRQs) with a call to trace_hardirqs_on just before the
return to userspace.
Signed-off-by: NChris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

In break_before_make_ttbr_switch we perform broadcast TLB maintenance
for the inner shareable domain, and use a DSB ISH to complete this.
However, at the point we execute this, secondary CPUs are either
physically offline, or executing code outside of the kernel. Upon
entering the kernel, secondary CPUs will invalidate their TLBs before
enabling their MMUs.

Thus we do not need to invalidate TLBs of other CPUs, and as with
idmap_cpu_replace_ttbr1 we can reduce the scope of maintenance to the
TLBs of the local CPU. This keeps our TLB maintenance code consistent,
and is a minor optimisation.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When building with 48-bit VAs and 16K page configuration, it's possible
to get the following warning when building the arm64 page table dumping
code:

arch/arm64/mm/dump.c: In function ‘walk_pud’:
arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow]

This is because pud_offset(pgd, 0) performs a shift to the right by 36
while the value 0 has the type 'int' by default, therefore 32-bit.

This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to
use 0UL for the address argument.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Literal loads of virtual addresses are subject to runtime relocation when
CONFIG_RELOCATABLE=y, and given that the relocation routines run with the
MMU and caches enabled, literal loads of relocated values performed with
the MMU off are not guaranteed to return the latest value unless the
memory covering the literal is cleaned to the PoC explicitly.

So defer the literal load until after the MMU has been enabled, just like
we do for primary_switch() and secondary_switch() in head.S.

Fixes: 1e48ef7f ("arm64: add support for building vmlinux as a relocatable PIE binary")
Cc: <stable@vger.kernel.org> # 4.6+
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since asm/acpi.h is only included by linux/acpi.h when CONFIG_ACPI is
enabled, disabling the latter leads to the following build error on
arm64:

arch/arm64/mm/numa.c: In function ‘arm64_numa_init’:
arch/arm64/mm/numa.c:395:24: error: ‘arm64_acpi_numa_init’ undeclared (first use in this function)
   if (!acpi_disabled && !numa_init(arm64_acpi_numa_init))

This patch include the asm/acpi.h explicitly in arch/arm64/mm/numa.c for
the arm64_acpi_numa_init() definition.

Fixes: d8b47fca ("arm64, ACPI, NUMA: NUMA support based on SRAT and SLIT")
Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When CONFIG_LOCALVERSION_AUTO is disabled, the version string is
just a tag name (or with a '+' appended if HEAD is not a tagged
commit).

During the development (and especially when git-bisecting), longer
version string would be helpful to identify the commit we are running.

This is a default y option, so drop the unset to enable it.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Enable options commonly needed by popular virtualization
and container applications. Use modules when possible to
avoid too much overhead for users not interested.

- add namespace and cgroup options needed
- add seccomp - optional, but enhances Qemu etc
- bridge, nat, veth, macvtap and multicast for routing
  guests and containers
- btfrs and overlayfs modules for container COW backends
- while near it, make fuse a module instead of built-in.

Generated with make saveconfig and dropping unrelated spurious
change hunks while commiting. bloat-o-meter old-vmlinux vmlinux:

add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652)
....
Total: Before=10515408, After=10604060, chg +0.84%
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In create_safe_exec_page(), we create a copy of the hibernate exit text,
along with some page tables to map this via TTBR0. We then install the
new tables in TTBR0.

In swsusp_arch_resume() we call create_safe_exec_page() before trying a
number of operations which may fail (e.g. copying the linear map page
tables). If these fail, we bail out of swsusp_arch_resume() and return
an error code, but leave TTBR0 as-is. Subsequently, the core hibernate
code will call free_basic_memory_bitmaps(), which will free all of the
memory allocations we made, including the page tables installed in
TTBR0.

Thus, we may have TTBR0 pointing at dangling freed memory for some
period of time. If the hibernate attempt was triggered by a user
requesting a hibernate test via the reboot syscall, we may return to
userspace with the clobbered TTBR0 value.

Avoid these issues by reorganising swsusp_arch_resume() such that we
have no failure paths after create_safe_exec_page(). We also add a check
that the zero page allocation succeeded, matching what we have for other
allocations.

Fixes: 82869ac5 ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NJames Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In create_safe_exec_page we install a set of global mappings in TTBR0,
then subsequently invalidate TLBs. While TTBR0 points at the zero page,
and the TLBs should be free of stale global entries, we may have stale
ASID-tagged entries (e.g. from the EFI runtime services mappings) for
the same VAs. Per the ARM ARM these ASID-tagged entries may conflict
with newly-allocated global entries, and we must follow a
Break-Before-Make approach to avoid issues resulting from this.

This patch reworks create_safe_exec_page to invalidate TLBs while the
zero page is still in place, ensuring that there are no potential
conflicts when the new TTBR0 value is installed. As a single CPU is
online while this code executes, we do not need to perform broadcast TLB
maintenance, and can call local_flush_tlb_all(), which also subsumes
some barriers. The remaining assembly is converted to use write_sysreg()
and isb().

Other than this, we safely manipulate TTBRs in the hibernate dance. The
code we install as part of the new TTBR0 mapping (the hibernated
kernel's swsusp_arch_suspend_exit) installs a zero page into TTBR1,
invalidates TLBs, then installs its preferred value. Upon being restored
to the middle of swsusp_arch_suspend, the new image will call
__cpu_suspend_exit, which will call cpu_uninstall_idmap, installing the
zero page in TTBR0 and invalidating all TLB entries.

Fixes: 82869ac5 ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NJames Morse <james.morse@arm.com>
Tested-by: NJames Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Executing from a non-executable area gives an ugly message:

lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0e08
lkdtm: attempting bad execution at ffff000008880700
Bad mode in Synchronous Abort handler detected on CPU2, code 0x8400000e -- IABT (current EL)
CPU: 2 PID: 998 Comm: sh Not tainted 4.7.0-rc2+ #13
Hardware name: linux,dummy-virt (DT)
task: ffff800077e35780 ti: ffff800077970000 task.ti: ffff800077970000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88

The 'IABT (current EL)' indicates the error but it's a bit cryptic
without knowledge of the ARM ARM. There is also no indication of the
specific address which triggered the fault. The increase in kernel
page permissions makes hitting this case more likely as well.
Handling the case in the vectors gives a much more familiar looking
error message:

lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0840
lkdtm: attempting bad execution at ffff000008880680
Unable to handle kernel paging request at virtual address ffff000008880680
pgd = ffff8000089b2000
[ffff000008880680] *pgd=00000000489b4003, *pud=0000000048904003, *pmd=0000000000000000
Internal error: Oops: 8400000e [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 997 Comm: sh Not tainted 4.7.0-rc1+ #24
Hardware name: linux,dummy-virt (DT)
task: ffff800077f9f080 ti: ffff800008a1c000 task.ti: ffff800008a1c000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Because the arm64 calling standard allows stacked function arguments to be
anywhere in the stack frame, do not attempt to duplicate the stack frame for
jprobes handler functions.

Documentation changes to describe this issue have been broken out into a
separate patch in order to simultaneously address them in other
architecture(s).
Signed-off-by: NDavid A. Long <dave.long@linaro.org>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Even when PCI is disabled, ARCH_HISI selects HISILICON_IRQ_MBIGEN
triggerring the following config warning:

warning: (ARM64 && HISILICON_IRQ_MBIGEN) selects ARM_GIC_V3_ITS which
	has unmet direct dependencies (PCI && PCI_MSI)

This patch makes selection of HISILICON_IRQ_MBIGEN conditional on PCI.

Cc: Ma Jun <majun258@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Even when PCI is disabled, ARCH_ALPINE selects ALPINE_MSI triggerring
the following config warning:

warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct
		dependencies (PCI)

This patch makes selection of ALPINE_MSI conditional on PCI.

Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable the hard limit of cpu count by set boot options nr_cpus=x
on arm64, and make a minor change about message when total number
of cpu exceeds the limit.
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reported-by: NShiyuan Hu <hushiyuan@huawei.com>
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NHans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

set_pte_at(.) will set or unset the PTE_RDONLY hardware bit before
writing the entry to the table.

This can cause problems with the copy-on-write logic in hugetlb_cow:
 *) hugetlb_cow(.) called to handle a write fault on read only pte,
 *) Before the copy-on-write updates the new page table a call is
    made to pte_same(huge_ptep_get(ptep), pte)), to check for a race,
 *) Because set_pte_at(.) changed the pte, *ptep != pte, and the
    hugetlb_cow(.) code erroneously assumes that it lost the race,
 *) The new page is subsequently freed without being used.

On arm64 this problem only becomes apparent when we apply:
67961f9d mm/hugetlb: fix huge page reserve accounting for private
mappings

When one runs the libhugetlbfs test suite, there are allocation errors
and hugetlbfs pages become erroneously locked in memory as reserved.
(There is a high HugePages_Rsvd: count).

In this patch we introduce pte_same which ignores the PTE_RDONLY bit,
allowing for the libhugetlbfs test suite to pass as expected and
without leaking any reserved HugeTLB pages.
Reported-by: NHuang Shijie <shijie.huang@arm.com>
Signed-off-by: NSteve Capper <steve.capper@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Add RTC source clock as Exynos7 needs source (32.768KHz) clock
for RTC block. Without this currently S3C RTC driver probe is broken
on this SoC.
Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

We need to set cpsr before determining the spsr bank, as the bank
depends on the target exception level of the injection, not the
current mode of the vcpu. Normally this is one in the same (EL1),
but not when we manage to trap an EL0 fault. It still doesn't really
matter for the 64-bit EL0 case though, as vcpu_spsr() unconditionally
uses the EL1 bank for that. However the 32-bit EL0 case gets fun, as
that path will lead to the BUG() in vcpu_spsr32().

This patch fixes the assignment order and also modifies some white
space in order to better group pairs of lines that have strict order.

Cc: stable@vger.kernel.org # v4.5
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

As reported by Zijun, the fdt_check_header() call in __fixmap_remap_fdt()
is not safe since it is not guaranteed that the FDT header is mapped
completely. Due to the minimum alignment of 8 bytes, the only fields we
can assume to be mapped are 'magic' and 'totalsize'.

Since the OF layer is in charge of validating the FDT image, and we are
only interested in making reasonably sure that the size field contains
a meaningful value, replace the fdt_check_header() call with an explicit
comparison of the magic field's value against the expected value.

Cc: <stable@vger.kernel.org>
Reported-by: NZijun Hu <zijun_hu@htc.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for arm64 at all even though ARCH_DLINFO will contain one NEW_AUX_ENT
for the VDSO address.

This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for
AT_BASE_PLATFORM which arm64 doesn't use, but lets define it now and add
the comment above ARCH_DLINFO as found in several other architectures to
remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to
date.

Fixes: f668cd16 ("arm64: ELF definitions")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The linker routines that we rely on to produce a relocatable PIE binary
treat it as a shared ELF object in some ways, i.e., it emits symbol based
R_AARCH64_ABS64 relocations into the final binary since doing so would be
appropriate when linking a shared library that is subject to symbol
preemption. (This means that an executable can override certain symbols
that are exported by a shared library it is linked with, and that the
shared library *must* update all its internal references as well, and point
them to the version provided by the executable.)

Symbol preemption does not occur for OS hosted PIE executables, let alone
for vmlinux, and so we would prefer to get rid of these symbol based
relocations. This would allow us to simplify the relocation routines, and
to strip the .dynsym, .dynstr and .hash sections from the binary. (Note
that these are tiny, and are placed in the .init segment, but they clutter
up the vmlinux binary.)

Note that these R_AARCH64_ABS64 relocations are only emitted for absolute
references to symbols defined in the linker script, all other relocatable
quantities are covered by anonymous R_AARCH64_RELATIVE relocations that
simply list the offsets to all 64-bit values in the binary that need to be
fixed up based on the offset between the link time and run time addresses.

Fortunately, GNU ld has a -Bsymbolic option, which is intended for shared
libraries to allow them to ignore symbol preemption, and unconditionally
bind all internal symbol references to its own definitions. So set it for
our PIE binary as well, and get rid of the asoociated sections and the
relocation code that processes them.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[will: fixed conflict with __dynsym_offset linker script entry]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Due to the untyped KIMAGE_VADDR constant, the linker may not notice
that the __rela_offset and __dynsym_offset expressions are absolute
values (i.e., are not subject to relocation). This does not matter for
KASLR, but it does confuse kallsyms in relative mode, since it uses
the lowest non-absolute symbol address as the anchor point, and expects
all other symbol addresses to be within 4 GB of it.

Fix this by qualifying these expressions as ABSOLUTE() explicitly.

Fixes: 0cd3defe ("arm64: kernel: perform relocation processing from ID map")
Cc: <stable@vger.kernel.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When booting an ACPI enabled kernel with 'mem=x', there is the
possibility that ACPI data regions from the firmware will lie above the
memory limit.  Ordinarily these will be removed by
memblock_enforce_memory_limit(.).

Unfortunately, this means that these regions will then be mapped by
acpi_os_ioremap(.) as device memory (instead of normal) thus unaligned
accessess will then provoke alignment faults.

In this patch we adopt memblock_mem_limit_remove_map instead, and this
preserves these ACPI data regions (marked NOMAP) thus ensuring that
these regions are not mapped as device memory.

For example, below is an alignment exception observed on ARM platform
when booting the kernel with 'acpi=on mem=8G':

  ...
  Unable to handle kernel paging request at virtual address ffff0000080521e7
  pgd = ffff000008aa0000
  [ffff0000080521e7] *pgd=000000801fffe003, *pud=000000801fffd003, *pmd=000000801fffc003, *pte=00e80083ff1c1707
  Internal error: Oops: 96000021 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc3-next-20160616+ #172
  Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1001A 02/09/2016
  task: ffff800001ef0000 ti: ffff800001ef8000 task.ti: ffff800001ef8000
  PC is at acpi_ns_lookup+0x520/0x734
  LR is at acpi_ns_lookup+0x4a4/0x734
  pc : [<ffff0000083b8b10>] lr : [<ffff0000083b8a94>] pstate: 60000045
  sp : ffff800001efb8b0
  x29: ffff800001efb8c0 x28: 000000000000001b
  x27: 0000000000000001 x26: 0000000000000000
  x25: ffff800001efb9e8 x24: ffff000008a10000
  x23: 0000000000000001 x22: 0000000000000001
  x21: ffff000008724000 x20: 000000000000001b
  x19: ffff0000080521e7 x18: 000000000000000d
  x17: 00000000000038ff x16: 0000000000000002
  x15: 0000000000000007 x14: 0000000000007fff
  x13: ffffff0000000000 x12: 0000000000000018
  x11: 000000001fffd200 x10: 00000000ffffff76
  x9 : 000000000000005f x8 : ffff000008725fa8
  x7 : ffff000008a8df70 x6 : ffff000008a8df70
  x5 : ffff000008a8d000 x4 : 0000000000000010
  x3 : 0000000000000010 x2 : 000000000000000c
  x1 : 0000000000000006 x0 : 0000000000000000
  ...
    acpi_ns_lookup+0x520/0x734
    acpi_ds_load1_begin_op+0x174/0x4fc
    acpi_ps_build_named_op+0xf8/0x220
    acpi_ps_create_op+0x208/0x33c
    acpi_ps_parse_loop+0x204/0x838
    acpi_ps_parse_aml+0x1bc/0x42c
    acpi_ns_one_complete_parse+0x1e8/0x22c
    acpi_ns_parse_table+0x8c/0x128
    acpi_ns_load_table+0xc0/0x1e8
    acpi_tb_load_namespace+0xf8/0x2e8
    acpi_load_tables+0x7c/0x110
    acpi_init+0x90/0x2c0
    do_one_initcall+0x38/0x12c
    kernel_init_freeable+0x148/0x1ec
    kernel_init+0x10/0xec
    ret_from_fork+0x10/0x40
  Code: b9009fbc 2a00037b 36380057 3219037b (b9400260)
  ---[ end trace 03381e5eb0a24de4 ]---
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

With 'efi=debug', we can see those ACPI regions loaded by firmware on
that board as:

  efi:   0x0083ff185000-0x0083ff1b4fff [Reserved           |   |  |  |  |  |  |  |   |WB|WT|WC|UC]*
  efi:   0x0083ff1b5000-0x0083ff1c2fff [ACPI Reclaim Memory|   |  |  |  |  |  |  |   |WB|WT|WC|UC]*
  efi:   0x0083ff223000-0x0083ff224fff [ACPI Memory NVS    |   |  |  |  |  |  |  |   |WB|WT|WC|UC]*

Link: http://lkml.kernel.org/r/1468475036-5852-3-git-send-email-dennis.chen@arm.comAcked-by: NSteve Capper <steve.capper@arm.com>
Signed-off-by: NDennis Chen <dennis.chen@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Kaly Xin <kaly.xin@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0a8ea52c ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API
feature") inadvertently removed the arch/arm prototype instead of the
arm64 one introduced by the original patch. There should not be any
bisection issues since this function is not called from anywhere else
(it could as well be removed from arch/arm at some point).

Fixes: 0a8ea52c ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature")
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Selecting CONFIG_RANDOMIZE_BASE=y and CONFIG_MODULES=n fails to build
the module PLTs support:

  CC      arch/arm64/kernel/module-plts.o
/work/Linux/linux-2.6-aarch64/arch/arm64/kernel/module-plts.c: In function ‘module_emit_plt_entry’:
/work/Linux/linux-2.6-aarch64/arch/arm64/kernel/module-plts.c:32:49: error: dereferencing pointer to incomplete type ‘struct module’

This patch selects ARM64_MODULE_PLTS conditionally only if MODULES is
enabled.

Fixes: f80fb3a3 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # 4.6+
Reported-by: NJeff Vander Stoep <jeffv@google.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We always have vma->vm_mm around.

Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Enables CONFIG_HARDENED_USERCOPY checks on arm64. As done by KASAN in -next,
renames the low-level functions to __arch_copy_*_user() so a static inline
can do additional work before the copy.
Signed-off-by: NKees Cook <keescook@chromium.org>

Add the SoC-level description of the PCIe controller found on the Marvell
Armada 3700 and enable this PCIe controller on the development board for
this SoC.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Added mdio node for mdio driver.  Also added phy-handle
reference to the ethernet nodes.

Removed unused clock node from storm sgenet1.
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Tested-by: NFushen Chen <fchen@apm.com>
Tested-by: NToan Le <toanle@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The kernel page table creation routines are accessible to other subsystems
(e.g., EFI) via the create_pgd_mapping() entry point, which allows mappings
to be created that are not covered by init_mm.

Since generic code such as apply_to_page_range() may expect translation
table pages that are not associated with init_mm to be covered by fully
constructed struct pages, add a call to pgtable_page_ctor() in the alloc
function used by create_pgd_mapping. Since it is no longer used by
create_mapping_late(), also update the name of this function to better
reflect its purpose.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NLaura Abbott <labbott@redhat.com>
Tested-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The only purpose served by create_mapping_late() is to remap the already
mapped .text and .rodata kernel segments with read-only permissions. Since
we no longer allow block mappings to be split or merged,
create_mapping_late() should not pass an allocation function pointer into
__create_pgd_mapping(). So pass NULL instead.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NLaura Abbott <labbott@redhat.com>
Tested-by: NSudeep Holla <sudeep.holla@arm.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The kprobe enablement work has uncovered that changes made by
a guest to MDSCR_EL1 were propagated to the host when VHE was
enabled, leading to unexpected exception being delivered.

Moving this register to the list of registers that are always
context-switched fixes the issue.

Fixes: 9c6c3568 ("arm64: KVM: VHE: Split save/restore of registers shared between guest and host")
Cc: stable@vger.kernel.org #4.6
Reported-by: NTirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Tested-by: NTirumalesh Chalamarla <Tirumalesh.Chalamarla@cavium.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

This patch adds compilation and link against irqchip.

Main motivation behind using irqchip code is to enable MSI
routing code. In the future irqchip routing may also be useful
when targeting multiple irqchips.

Routing standard callbacks now are implemented in vgic-irqfd:
- kvm_set_routing_entry
- kvm_set_irq
- kvm_set_msi

They only are supported with new_vgic code.

Both HAVE_KVM_IRQCHIP and HAVE_KVM_IRQ_ROUTING are defined.
KVM_CAP_IRQ_ROUTING is advertised and KVM_SET_GSI_ROUTING is allowed.

So from now on IRQCHIP routing is enabled and a routing table entry
must exist for irqfd injection to succeed for a given SPI. This patch
builds a default flat irqchip routing table (gsi=irqchip.pin) covering
all the VGIC SPI indexes. This routing table is overwritten by the
first first user-space call to KVM_SET_GSI_ROUTING ioctl.

MSI routing setup is not yet allowed.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>