Add vpss helper functions to be used in the main driver for setting
hardware parameters.

Add interface functions to set sync polarity, interrupt completion and
pageframe size in vpss to be used by the main driver.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

request_mem_region for VPSS_CLK_CTRL register and ioremap.
and enable clocks appropriately.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

enable the clocks required for VPFE to work in PCCR register,
and enbale ISIF out on BCR to get the correct operation from ISIF.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NLad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make the pipeline try format routine more generic to support any
number of subdevs in the pipeline, rather than hard coding it for
only a sensor, MIPI-CSIS and FIMC subdevs and the FIMC video node.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some sensors can have more than one pad (case of S5C73M3).
In such cases FIMC assumes the last pad of the sensor is
the source pad.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add second source media pad for the FIFO data output to FIMC-IS
and implement subdev s_stream op for configurations where FIMC-LITE
is used as a glue logic between FIMC-IS and MIPI-CSIS or an image
sensor. The second source media pad will be linked to the FIMC-LITE
video node.
For proper configuration the attached image sensor/video encoder
properties are needed, like video bus type, signal polarities, etc.
For this purpose there is a small routine added that walks the
pipeline and returns the sensor subdev.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add subdev group id definition for FIMC-IS ISP and sensor subdev.
While at it rename all group id definitions to start with GRP_ID.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Dump registers contents together with the event counters state
in VIDIOC_LOG_STATUS ioctl.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Enable only MIPI CSI-2 data lanes at the DPHY that are actively
used, rather than unmasking all unconditionally.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The MIPI CSIS device supports MIPI CSI-2 RAW8, RAW10, RAW12 data
types. Add related media bus pixel format definitions. This
doesn't cover all possible supported media bus pixel formats.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add variant data structures for Exynos4212 and Exynos4412 SoC.
Add 'const' qualifier for the variant description structures.
Also remove has_cam_if flags from FIMC3 on Exynos4210 SoC is
it has no interconnections the camera ports.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The FIMC FIFO output is not supported in the driver due to
some hardware issues thus we can remove some code as out_path
is always FIMC_IO_DMA.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use v4l2_info() to make it possible to identify which FIMC-LITE
device instance the logs refer to.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The counter field is unsigned so >= 0 condition always evaluates
to true. Fix this to log events for which counter is > 0 or for
all when in debug mode.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Setting FIMC_REG_CITRGFMT_FLIP_X_MIRROR bit causes X-axis image
flip (vertical flip) and thus it corresponds to V4L2_CID_VFLIP.
Likewise, setting FIMC_REG_CITRGFMT_FLIP_Y_MIRROR bit causes Y-axis
image flip (horizontal flip) and thus it corresponds to V4L2_CID_HFLIP.
Currently the driver does X-axis flip when V4L2_CID_HFLIP is set and
Y-axis flip for V4L2_CID_VFLIP. Fix this incorrect assignment by setting
proper FIMC_REG_CITRGFMT register bits for ctx->hflip and ctx->vflip.
Reported-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Set buffer timestamp flags for videobuf, videobuf2 and drivers that use
neither.
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert drivers using wall clock time (CLOCK_REALTIME) to timestamp from the
monotonic timer (CLOCK_MONOTONIC).
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

G-Scaler src buffer count as well as destination buffer
count is increased to 32. This is required for G-Scaler to
interface with MFC, as MFC demands 32 capture buffers for
some H264 streams.
Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

devm_clk_get() is a device managed function and makes error handling
a bit simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make sure there is no unbalanced clk_unprepare call and add missing
clock release in the driver's remove() callback.
Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In case of clk_prepare failure, the function gsc_clk_get also prints
"failed to get clock" which is not correct. Hence move the error
messages to their respective blocks. While at it, also renamed the labels
meaningfully.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixes the following warning:
WARNING: space prohibited between function name and open parenthesis '('
FILE: media/platform/exynos-gsc/gsc-m2m.c:606:
	ctx = kzalloc(sizeof (*ctx), GFP_KERNEL);
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make gsc-m2m propagate the timestamp field from source to destination
buffers.
Signed-off-by: NJohn Sheu <sheu@google.com>
Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adding V4L2_PIX_FMT_NV12MT_16X16 to G-Scaler supported formats.
If the output or input format is V4L2_PIX_FMT_NV12MT_16X16, configure
G-Scaler to use GSC_IN_TILE_MODE.

[s.nawrocki: shortened the pixel format description]
Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/platform/sh_veu.c:269:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat]
drivers/media/platform/sh_veu.c:276:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat]

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The CSI on i.MX27 has some constraints regarding image width.
This patch makes sure those requirements are met in try_fmt().
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
[g.liakhovetski@gmx.de: make constraint i.MX27-specific]
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use managed allocations to simplify error handling and clean up paths.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use managed allocations to simplify error handling and clean up paths.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Explicit checks for the JPEG pixel format in soc_mbus_bytes_per_line() and
soc_mbus_image_size() are superfluous, because also without them these
functions will perform correctly. The former will return 0 based on
packing == SOC_MBUS_PACKING_VARIABLE and the latter will simply multiply
the user-provided line length by the image height to obtain a frame buffer
size estimate. The original version of the "media: soc_camera: don't clear
pix->sizeimage in JPEG mode" patch was correct and my amendment, adding
these two checks was superfluous.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In both error and clean up cases there is no need to wait for runtime PM
to finish suspending the device.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Using device-managed devm_regulator_bulk_get() eliminates the need to
release regulators explicitly.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Video Engine Unit (VEU) is an IP block, found in multiple SuperH and ARM-
based sh-mobile and r-mobile SoCs, capable of processing video data. It
can perform colour-space conversion, scaling and several filtering
transformations. This patch adds an initial implementation of a mem2mem
V4L2 driver for VEU. So far only conversion from NV12 to RGB565 is
supported. Further functionality shall be added in the future.
This driver is based on a VEU vidix driver by Magnus Damm.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The omap_vout device implements the output overlay API, use the
corresponding ioctl operations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Enumerating formats for output overlays doesn't make sense, as the pixel
format is defined by the display API, not the V4L2 API. Drop the
vidioc_enum_fmt_vid_overlay ioctl operation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Found using the following semantic patch:
<spml>
@@
@@
spin_lock_irqsave(...);
... when != spin_unlock_irqrestore(...);
* GFP_KERNEL
</spml>
Signed-off-by: NCyril Roelandt <tipecaml@gmail.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

sh-vou causes several "may be used uninitialized" warnings. Even though
they all are purely theoretical, it is better to fix them.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Sometimes VIDIOC_S_CROP ioctl doesn't work, soc-camera driver reports:
soc-camera-pdrv soc-camera-pdrv.0: S_CROP denied: getting current crop failed
The VIDIOC_G_CROP documentation states that the type field needs to be
set to the respective buffer type when querying, so the check in .g_crop()
of the subdevices returns -EINVAL if the type is not set properly. Here the
uninitialized local variable 'current_crop' is passed to the .g_crop() and
this leads to the observed error. Initialize the type field of the local
'current_crop' before get_crop call.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Drivers must not rely on cpu_is_omap* macros (they will soon become
private). Use the ISP revision instead to identify the hardware.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Clock enable (disable) is split in two operations, prepare and enable
(disable and unprepare). Perform both when enabling/disabling the ISP
clocks.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Support both grayscale (Y8) and Bayer (SBGGR8, SGBRG8, SGRBG8 and
SRGGB8) formats.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>