- 25 3月, 2015 1 次提交
-
-
由 Heiko Carstens 提交于
Remove the 31 bit support in order to reduce maintenance cost and effectively remove dead code. Since a couple of years there is no distribution left that comes with a 31 bit kernel. The 31 bit kernel also has been broken since more than a year before anybody noticed. In addition I added a removal warning to the kernel shown at ipl for 5 minutes: a960062e ("s390: add 31 bit warning message") which let everybody know about the plan to remove 31 bit code. We didn't get any response. Given that the last 31 bit only machine was introduced in 1999 let's remove the code. Anybody with 31 bit user space code can still use the compat mode. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 2月, 2015 2 次提交
-
-
由 Ameen Ali 提交于
Avoid out-of-bounds-read by checking count before indexing. Signed-off-by : Ameen Ali <Ameenali023@gmail.com> Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We increase the msb_count after we're finished building the request. That way we can always access the current request via scmrq->request[msb_count] . But once the request is started we need to make sure that the array index stays below msb_count. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 29 1月, 2015 2 次提交
-
-
由 Sebastian Ott 提交于
The dasd driver has a lot of duplicated code to handle dasd_global_profile. With this patch we use the same code for the global and the per device profiling data. Note that dasd_stats_write had to change slightly to maintain some odd differences between A) per device and global profile and B) proc and sysfs interface usage. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Access to DASDs global statistics is done without locking which can lead to inconsistent data. Add locking to fix this. Also move the relevant structs in a global dasd_profile struct. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 1月, 2015 1 次提交
-
-
由 Gerald Schaefer 提交于
The content of a DCSS of type SN or EN cannot be saved. Issue a warning when trying to save such a DCSS. Depending on the setup, this may be a user error or intended behaviour e.g. with a multi-DCSS device. Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 1月, 2015 1 次提交
-
-
由 Matthew Wilcox 提交于
In order to support accesses to larger chunks of memory, pass in a 'size' parameter (counted in bytes), and return the amount available at that address. Add a new helper function, bdev_direct_access(), to handle common functionality including partition handling, checking the length requested is positive, checking for the sector being page-aligned, and checking the length of the request does not pass the end of the partition. Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NBoaz Harrosh <boaz@plexistor.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 08 12月, 2014 4 次提交
-
-
由 Sebastian Ott 提交于
Introduce a module parameter to specify the number of requests we try to handle with one HW request. Suggested-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Handle up to 8 block layer requests per HW request. These requests can be processed in parallel on the device leading to better throughput (and less interrupts). The overhead for additional requests is small since we don't blindly allocate new aidaws but try to use what's left of the previous one. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
AOBs (the structure describing the HW request) need to be 4K aligned but very little of that page is actually used. With this patch we place aidaws at the end of the AOB page and only allocate a separate page for aidaws when we have to (lists of aidaws must not cross page boundaries). Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We currently use one preallocated page per HW request to store aidaws. With this patch we use mempool to allocate an aidaw page whenever we need it. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 28 11月, 2014 4 次提交
-
-
由 Stefan Haberland 提交于
In case somebody attempted to open the device during online processing the partition detection ioctl may have failed. Added a retry loop to avoid not detected partitions. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Fix race for sleep_on requests leading to list corruption. The SLEEP_ON_END_TAG is set during CQR clean up. Remove it from interrupt handler to avoid the CQR from being cleared when it is still in the device_queue. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
During device activation all paths could be lost and since the device is not active it has no indication of this fact - hence the CQR will time-out. The following cancelation might fail with -EINVAL because CIO took over control and started path verification. In this case mark the CQR as being CLEARED since it could not be running any more. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 20 10月, 2014 1 次提交
-
-
由 Wolfram Sang 提交于
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 09 10月, 2014 2 次提交
-
-
由 Stefan Haberland 提交于
Add support for Control Unit Initiated Reconfiguration (CUIR) to Linux, a storage server interface to reconcile concurrent hardware changes between storage and host. Reviewed-by: NStefan Weinhuber <wein@de.ibm.com> Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Error recovery requests may not be cleaned up correctly so that other needed erp requests can not be build because of insufficient memory. This would lead to an infinite loop trying to build erp requests. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 05 10月, 2014 1 次提交
-
-
由 Mike Snitzer 提交于
Clear QUEUE_FLAG_ADD_RANDOM in all block drivers that set QUEUE_FLAG_NONROT. Historically, all block devices have automatically made entropy contributions. But as previously stated in commit e2e1a148 ("block: add sysfs knob for turning off disk entropy contributions"): - On SSD disks, the completion times aren't as random as they are for rotational drives. So it's questionable whether they should contribute to the random pool in the first place. - Calling add_disk_randomness() has a lot of overhead. There are more reliable sources for randomness than non-rotational block devices. From a security perspective it is better to err on the side of caution than to allow entropy contributions from unreliable "random" sources. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 01 9月, 2014 1 次提交
-
-
由 Peter Oberparleiter 提交于
Change the visibility of the dasd parameter of kernel module dasd_mod to be consistent with the eer_pages parameter. Signed-off-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: NStefan Weinhuber <wein@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 01 8月, 2014 1 次提交
-
-
由 Stefan Haberland 提交于
Rename enable_PAV to enable_pav. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 7月, 2014 8 次提交
-
-
由 Stefan Haberland 提交于
Kernel panic or a hanging device during format if an alias device is set offline or I/O errors occur. Omit the error recovery procedure for alias devices and do retries on the base device with full erp. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
If I/O errors occur during format a kernel panic with a list_del corruption may occur. Stop error recovery procedure after an erp action was taken. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
If path events occur the formatting process stucks because path events may flush format requests from the queue. Kick the format process after path events are handled. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
Formatting of a previously formatted device is slower than newly format a device when alias devices are available. For already formatted devices the alias devices are not used for formatting. Fix the alias handling for already formatted devices. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Fabian Frederick 提交于
Fix checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Fabian Frederick 提交于
Fix checkpatch warning: "WARNING: Prefer pr_warn(... to pr_warning(..." + coalesce formats. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Fabian Frederick 提交于
Fix checkpatch warnings: "WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable" Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Fabian Frederick 提交于
This fixes checkpatch warning: "WARNING: debugfs_remove(NULL) is safe this check is probably not required" Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 11 6月, 2014 1 次提交
-
-
由 Kees Cook 提交于
This makes sure format strings can't accidentally leak into kernel interface names. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 03 4月, 2014 1 次提交
-
-
由 Thomas Huth 提交于
Use the new defines for external interruption codes to get rid of "magic" numbers in the s390 source code. And while we're at it, also rename the (un-)register_external_interrupt function to something shorter so that this patch does not exceed the 80 columns all over the place. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 08 2月, 2014 1 次提交
-
-
由 Tejun Heo 提交于
driver-core now supports synchrnous self-deletion of attributes and the asynchrnous removal mechanism is scheduled for removal. Use it instead of device_schedule_callback(). * Conversions in arch/s390/pci/pci_sysfs.c and drivers/s390/block/dcssblk.c are straightforward. * drivers/s390/cio/ccwgroup.c is a bit more tricky because ccwgroup_notifier() was (ab)using device_schedule_callback() to purely obtain a process context to kick off ungroup operation which may block from a notifier callback. Rename ccwgroup_ungroup_callback() to ccwgroup_ungroup() and make it take ccwgroup_device * instead. The new function is now called directly from ccwgroup_ungroup_store(). ccwgroup_notifier() chain is updated to explicitly bounce through ccwgroup_device->ungroup_work. This also removes possible failure from memory pressure. Only compile-tested. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 1月, 2014 1 次提交
-
-
由 Sebastian Ott 提交于
During parsing of the sizes array the pointer to the particular string is lost. Keep it by using an extra pointer to store the end position of the parsed string. Keeping these parameters accessible can be helpful for debugging purposes and for userspace reading the parameters at runtime via sysfs. Also this will ensure that the memory is freed at module unload time. Reported-by: NMichael Veigel <veigel@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 16 1月, 2014 1 次提交
-
-
由 Hendrik Brueckner 提交于
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 1月, 2014 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This reverts commit bdbb0a13. Tejun writes: I'm sorry but can you please revert the whole series? get_active() waiting while a node is deactivated has potential to lead to deadlock and that deactivate/reactivate interface is something fundamentally flawed and that cgroup will have to work with the remove_self() like everybody else. IOW, I think the first posting was correct. Cc: Tejun Heo <tj@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 1月, 2014 1 次提交
-
-
由 Tejun Heo 提交于
driver-core now supports synchrnous self-deletion of attributes and the asynchrnous removal mechanism is scheduled for removal. Use it instead of device_schedule_callback(). * Conversions in arch/s390/pci/pci_sysfs.c and drivers/s390/block/dcssblk.c are straightforward. * drivers/s390/cio/ccwgroup.c is a bit more tricky because ccwgroup_notifier() was (ab)using device_schedule_callback() to purely obtain a process context to kick off ungroup operation which may block from a notifier callback. Rename ccwgroup_ungroup_callback() to ccwgroup_ungroup() and make it take ccwgroup_device * instead. The new function is now called directly from ccwgroup_ungroup_store(). ccwgroup_notifier() chain is updated to explicitly bounce through ccwgroup_device->ungroup_work. This also removes possible failure from memory pressure. Only compile-tested. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 12月, 2013 1 次提交
-
-
由 Stefan Weinhuber 提交于
After the call to del_gendisk, the gendisk still holds a reference to its request_queue. We must not modify the gendisks queue pointer before the put_disk call, or the gendisk_release function cannot release the reference and the memory for the request_queue structure is lost. Signed-off-by: NStefan Weinhuber <wein@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 24 11月, 2013 2 次提交
-
-
由 Kent Overstreet 提交于
More prep work for immutable biovecs - with immutable bvecs drivers won't be able to use the biovec directly, they'll need to use helpers that take into account bio->bi_iter.bi_bvec_done. This updates callers for the new usage without changing the implementation yet. Signed-off-by: NKent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Jim Paris <jim@jtan.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: support@lsi.com Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Cc: linux-m68k@lists.linux-m68k.org Cc: linuxppc-dev@lists.ozlabs.org Cc: drbd-user@lists.linbit.com Cc: nbd-general@lists.sourceforge.net Cc: cbe-oss-dev@lists.ozlabs.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: DL-MPTFusionLinux@lsi.com Cc: linux-scsi@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: linux-fsdevel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: linux-mm@kvack.org Acked-by: NGeoff Levand <geoff@infradead.org>
-
由 Kent Overstreet 提交于
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: NKent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
-
- 20 11月, 2013 1 次提交
-
-
由 Stefan Weinhuber 提交于
An I/O request that does not read or write full blocks cannot be translated into a correct CCW or TCW program and should be rejected right away. In particular the code that creates TCW requests will not notice this problem and create broken TCWs that will be rejected by the hardware. Signed-off-by: NStefan Weinhuber <wein@de.ibm.com> Reference-ID: RQM1956
-