- 20 9月, 2016 18 次提交
-
-
由 Marcel Holtmann 提交于
Assignment of the hci_pi(sk)->channel should be done early when binding the HCI socket. This avoids confusion with the RAW channel that is used for legacy access. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Only when the cookie has been assigned, then send the open and close monitor messages. Also if the socket is bound to a device, then include the index into the message. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of keeping a version string around, use version and revision numbers and then stringify them for use as module parameter. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of manually allocating cookie information each time, use helper functions for generating and releasing cookies. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
In case of failure, the Set IO Capability command is suppose to return command status and not command complete. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The address information of the Get Clock Information return parameters is copying from a different memory location. It uses &cmd->param while it actually needs to be cmd->param. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of hiding everything behind a general managment events flag, introduce indivdual flags that allow fine control over which events are send to a given management channel. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
When an Advertising Instance is removed, the Advertising Removed event shouldn't be sent to the same socket that issued the Remove Advertising command (it gets a command complete event instead). The mgmt_advertising_removed() function already has a parameter for skipping a specific socket, but there was no code to propagate the right value to this parameter. This patch fixes the issue by making sure the intermediate hci_req_clear_adv_instance() function gets the socket pointer. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This adds support for tracing all management commands and events via the monitor interface. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
This sends new notifications to the monitor support whenever a management channel has been opened or closed. This allows tracing of control channels really easily. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The mgmt version information will be also needed for the control changell tracing feature. This provides a helper to pack them. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
To further allow unique identification and tracking of control socket, store cookie and comm information when binding the socket. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The SOL_HCI level should be enforced when using socket options on the HCI raw socket interface. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Aristeu Rozanski 提交于
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com> Acked-by: NAlexander Aring <aar@pengutronix.de> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Aristeu Rozanski 提交于
Just because we don't support certain types of frames yet doesn't mean we have to flood the message log with warnings about "invalid" frames. Signed-off-by: NAristeu Rozanski <arozansk@redhat.com> Acked-by: NAlexander Aring <aar@pengutronix.de> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch removes handling to remove short address for a neigbour entry if RS/RA/NS/NA doesn't contain a short address. If these messages doesn't has any short address option, the existing short address from ndisc cache will be used. The current behaviour will set that the neigbour doesn't has a short address anymore. Signed-off-by: NAlexander Aring <aar@pengutronix.de> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch sets the net namespace when creating SoftMAC interfaces. This is important if the namespace at phy layer was switched before. Currently we losing interfaces in some namespace and it's not possible to recover that. Signed-off-by: NAlexander Aring <aar@pengutronix.de> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
Instead of just having a LED trigger for power on a specific controller, this adds the LED trigger "bluetooth-power" that combines the power states of all controllers into a single trigger. This simplifies the trigger selection and also supports multiple controllers per host system via a single LED. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 19 9月, 2016 18 次提交
-
-
由 Florian Westphal 提交于
This change replaces sk_buff_head struct in Qdiscs with new qdisc_skb_head. Its similar to the skb_buff_head api, but does not use skb->prev pointers. Qdiscs will commonly enqueue at the tail of a list and dequeue at head. While skb_buff_head works fine for this, enqueue/dequeue needs to also adjust the prev pointer of next element. The ->prev pointer is not required for qdiscs so we can just leave it undefined and avoid one cacheline write access for en/dequeue. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
After previous patch these functions are identical. Replace __skb_dequeue in qdiscs with __qdisc_dequeue_head. Next patch will then make __qdisc_dequeue_head handle single-linked list instead of strcut sk_buff_head argument. Doesn't change generated code. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Moves qdisc stat accouting to qdisc_dequeue_head. The only direct caller of the __qdisc_dequeue_head version open-codes this now. This allows us to later use __qdisc_dequeue_head as a replacement of __skb_dequeue() (which operates on sk_buff_head list). Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
A followup change will replace the sk_buff_head in the qdisc struct with a slightly different list. Use of the sk_buff_head helpers will thus cause compiler warnings. Open-code these accesses in an extra change to ease review. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Doesn't change generated code. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christophe Jaillet 提交于
In commit 311b2177 ("sctp: simplify sk_receive_queue locking"), a call to 'skb_queue_splice_tail_init()' has been made explicit. Previously it was hidden in 'sctp_skb_list_tail()' Now, the code around it looks redundant. The '_init()' part of 'skb_queue_splice_tail_init()' should already do the same. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
Add _nf_register_hooks() and _nf_unregister_hooks() calls which allow caller to hold RTNL mutex. Signed-off-by: NMahesh Bandewar <maheshb@google.com> CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
Make ip6_route_input_lookup available outside of ipv6 the module similar to ip_route_input_noref in the IPv4 world. Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Add a nested attribute of offload stats to if_stats_msg named IFLA_STATS_LINK_OFFLOAD_XSTATS. Under it, add SW stats, meaning stats only per packets that went via slowpath to the cpu, named IFLA_OFFLOAD_XSTATS_CPU_HIT. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When fq is used on 32bit kernels, we need to lock the qdisc before copying 64bit fields. Otherwise "tc -s qdisc ..." might report bogus values. Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Instead of using flow stats per NUMA node, use it per CPU. When using megaflows, the stats lock can be a bottleneck in scalability. On a E5-2690 12-core system, usual throughput went from ~4Mpps to ~15Mpps when forwarding between two 40GbE ports with a single flow configured on the datapath. This has been tested on a system with possible CPUs 0-7,16-23. After module removal, there were no corruption on the slab cache. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@redhat.com> Cc: pravin shelar <pshelar@ovn.org> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
On a system with only node 1 as possible, all statistics is going to be accounted on node 0 as it will have a single writer. However, when getting and clearing the statistics, node 0 is not going to be considered, as it's not a possible node. Tested that statistics are not zero on a system with only node 1 possible. Also compile-tested with CONFIG_NUMA off. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
As David and Marcelo's suggestion, ENOMEM err shouldn't return back to user in transmit path. Instead, sctp's retransmit would take care of the chunks that fail to send because of ENOMEM. This patch is only to do some release job when alloc_skb fails, not to return ENOMEM back any more. Besides, it also cleans up sctp_packet_transmit's err path, and fixes some issues in err path: - It didn't free the head skb in nomem: path. - No need to check nskb in no_route: path. - It should goto err: path if alloc_skb fails for head. - Not all the NOMEMs should free nskb. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
sctp_outq_flush return value is meaningless now, this patch is to make sctp_outq_flush return void, as well as sctp_outq_fail and sctp_outq_uncork. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Every time when sctp calls sctp_outq_flush, it sends out the chunks of control queue, retransmit queue and data queue. Even if some trunks are failed to transmit, it still has to flush all the transports, as it's the only chance to clean that transmit_list. So the latest transmit error here should be returned back. This transmit error is an internal error of sctp stack. I checked all the places where it uses the transmit error (the return value of sctp_outq_flush), most of them are actually just save it to sk_err. Except for sctp_assoc/endpoint_bh_rcv, they will drop the chunk if it's failed to send a REPLY, which is actually incorrect, as we can't be sure the error that sctp_outq_flush returns is from sending that REPLY. So it's meaningless for sctp_outq_flush to return error back. This patch is to save transmit error to sk_err in sctp_outq_flush, the new error can update the old value. Eventually, sctp_wait_for_* would check for it. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Last patch "sctp: do not return the transmit err back to sctp_sendmsg" made sctp_primitive_SEND return err only when asoc state is unavailable. In this case, chunks are not enqueued, they have no chance to be freed if we don't take care of them later. This Patch is actually to revert commit 1cd4d5c4 ("sctp: remove the unused sctp_datamsg_free()"), commit 69b5777f ("sctp: hold the chunks only after the chunk is enqueued in outq") and commit 8b570dc9 ("sctp: only drop the reference on the datamsg after sending a msg"), to use sctp_datamsg_free to free the chunks of current msg. Fixes: 8b570dc9 ("sctp: only drop the reference on the datamsg after sending a msg") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Once a chunk is enqueued successfully, sctp queues can take care of it. Even if it is failed to transmit (like because of nomem), it should be put into retransmit queue. If sctp report this error to users, it confuses them, they may resend that msg, but actually in kernel sctp stack is in charge of retransmit it already. Besides, this error probably is not from the failure of transmitting current msg, but transmitting or retransmitting another msg's chunks, as sctp_outq_flush just tries to send out all transports' chunks. This patch is to make sctp_cmd_send_msg return avoid, and not return the transmit err back to sctp_sendmsg Fixes: 8b570dc9 ("sctp: only drop the reference on the datamsg after sending a msg") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Data Chunks are only sent by sctp_primitive_SEND, in which sctp checks the asoc's state through statetable before calling sctp_outq_tail. So there's no need to check the asoc's state again in sctp_outq_tail. Besides, sctp_do_sm is protected by lock_sock, even if sending msg is interrupted by timer events, the event's processes still need to acquire lock_sock first. It means no others CMDs can be enqueue into side effect list before CMD_SEND_MSG to change asoc->state, so it's safe to remove it. This patch is to remove redundant asoc->state check from sctp_outq_tail. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2016 4 次提交
-
-
由 Alexei Starovoitov 提交于
Similar to gre, vxlan, geneve tunnels allow IPIP6 and IP6IP6 tunnels to operate in 'collect metadata' mode. Unlike ipv4 code here it's possible to reuse ip6_tnl_xmit() function for both collect_md and traditional tunnels. bpf_skb_[gs]et_tunnel_key() helpers and ovs (in the future) are the users. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
Similar to gre, vxlan, geneve tunnels allow IPIP tunnels to operate in 'collect metadata' mode. bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away. ovs can use it as well in the future (once appropriate ovs-vport abstractions and user apis are added). Note that just like in other tunnels we cannot cache the dst, since tunnel_info metadata can be different for every packet. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 3401 931 44 4376 1118 net/l2tp/l2tp_eth.o and after the change it is: text data bss dec hex filename 3993 347 44 4384 1120 net/l2tp/l2tp_eth.o Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
(As asked by Dave in Februrary) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-