[ Upstream commit 5ebb272b2ea7e02911a03a893f8d922d49f9bb4a ]

Register operand size of invvpid and invept instruction in 64-bit mode
has always 64 bits. Adjust inline function argument type to reflect
correct size.
Signed-off-by: NUros Bizjak <ubizjak@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7671ce21b13b9596163a29f4712cb2451a9b97dc ]

In preparation of supporting checkpoint/restore for nested state,
commit ca0bde28 ("kvm: nVMX: Split VMCS checks from nested_vmx_run()")
modified check_vmentry_postreqs() to only perform the guest EFER
consistency checks when nested_run_pending is true.  But, in the
normal nested VMEntry flow, nested_run_pending is only set after
check_vmentry_postreqs(), i.e. the consistency check is being skipped.

Alternatively, nested_run_pending could be set prior to calling
check_vmentry_postreqs() in nested_vmx_run(), but placing the
consistency checks in nested_vmx_enter_non_root_mode() allows us
to split prepare_vmcs02() and interleave the preparation with
the consistency checks without having to change the call sites
of nested_vmx_enter_non_root_mode().  In other words, the rest
of the consistency check code in nested_vmx_run() will be joining
the postreqs checks in future patches.

Fixes: ca0bde28 ("kvm: nVMX: Split VMCS checks from nested_vmx_run()")
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Cc: Jim Mattson <jmattson@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b7031fd40fcc741b0f9b0c04c8d844e445858b84 ]

Reset the vm_{entry,exit}_controls_shadow variables as well as the
segment cache after loading a new VMCS in vmx_switch_vmcs().  The
shadows/cache track VMCS data, i.e. they're stale every time we
switch to a new VMCS regardless of reason.

This fixes a bug where stale control shadows would be consumed after
a nested VMExit due to a failed consistency check.
Suggested-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 381fdd62c38344a771aed06adaf14aae65c47454 ]

This patch fixes command_line array zero-terminated
one byte over the end of the array, causing boot to hang.
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
Signed-off-by: NGreg Ungerer <gerg@linux-m68k.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 473af09b56dc4be68e4af33220ceca6be67aa60d ]

eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.

However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.

The clear statement was added by commit 807a827d ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bcbe3730531239abd45ab6c6af4a18078b37dd47 ]

If a device is removed during EEH processing (either by a driver's
handler or as part of recovery), it can lead to a null dereference
in eeh_pe_report_edev().

To handle this, skip devices that have been removed.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e8e132e6885962582784b6fa16a80d07ea739c0f ]

This will avoid auto-vectorisation when building with higher
optimisation levels.

We don't know if the machine can support VSX and even if it's present
it's probably not going to be enabled at this point in boot.

These flag were both added prior to GCC 4.6 which is the minimum
compiler version supported by upstream, thanks to Segher for the
details.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1a855eaccf353f7ed1d51a3d4b3af727ccbd81ca ]

As of commit 10c77dba ("powerpc/boot: Fix build failure in 32-bit
boot wrapper") the opal code is hidden behind CONFIG_PPC64_BOOT_WRAPPER,
but the boot wrapper avoids include/linux, so it does not get the normal
Kconfig flags.

We can drop the guard entirely as in commit f8e8e69c ("powerpc/boot:
Only build OPAL code when necessary") the makefile only includes opal.c
in the build if CONFIG_PPC64_BOOT_WRAPPER is set.

Fixes: 10c77dba ("powerpc/boot: Fix build failure in 32-bit boot wrapper")
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 014704e6f54189a203cc14c7c0bb411b940241bc ]

The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.

This doesn't really change runtime much but it fixes a static checker
warning.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 52eb74339a6233c69f4e3794b69ea7c98eeeae1b ]

rdt_find_domain() returns an ERR_PTR() that is generated from a provided
domain id when the value is negative.

Care needs to be taken when creating an ERR_PTR() from this value
because a subsequent check using IS_ERR() expects the error to
be within the MAX_ERRNO range. Using an invalid domain id as an
ERR_PTR() does work at this time since this is currently always -1.
Using this undocumented assumption is fragile since future users of
rdt_find_domain() may not be aware of thus assumption.

Two related issues are addressed:

- Ensure that rdt_find_domain() always returns a valid error value by
forcing the error to be -ENODEV when a negative domain id is provided.

- In a few instances the return value of rdt_find_domain() is just
checked for NULL - fix these to include a check of ERR_PTR.

Fixes: d89b7379 ("x86/intel_rdt/cqm: Add mon_data")
Fixes: 521348b011d6 ("x86/intel_rdt: Introduce utility to obtain CDP peer")
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: fenghua.yu@intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/b88cd4ff6a75995bf8db9b0ea546908fe50f69f3.1544479852.git.reinette.chatre@intel.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b4d16ab58c41ff0125822464bdff074cebd0fe47 ]

In the recent commit 8b78fdb045de ("powerpc/time: Use
clockevents_register_device(), fixing an issue with large
decrementer") we changed the way we initialise the decrementer
clockevent(s).

We no longer initialise the mult & shift values of
decrementer_clockevent itself.

This has the effect of breaking PR KVM, because it uses those values
in kvmppc_emulate_dec(). The symptom is guest kernels spin forever
mid-way through boot.

For now fix it by assigning back to decrementer_clockevent the mult
and shift values.

Fixes: 8b78fdb045de ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a763ecc15d0e37c3a15ff6825183061209832685 ]

OMAP5's Super-Speed USB port has a software mailbox register
that needs to be fed with VBUS and ID events from an external
VBUS/ID comparator.

Without this, Host role will not work correctly.

Fixes: 656c1a65ab55 ("ARM: dts: omap5: enable OTG role for DWC3 controller")
Reported-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c200dac78fec66d87ef262cac38cfe4feabdf737 ]

PCI BIOS requires the BIOS area 0x0A0000-0x0FFFFFF to be mapped W+X for
various legacy reasons. When CONFIG_DEBUG_WX is enabled, this triggers the
WX warning, but this is misleading because the mapping is required and is
not a result of an accidental oversight.

Prevent the full warning when PCI BIOS is enabled and the detected WX
mapping is in the BIOS area. Just emit a pr_warn() which denotes the
fact. This is partially duplicating the info which the PCI BIOS code emits
when it maps the area as executable, but that info is not in the context of
the WX checking output.

Remove the extra %p printout in the WARN_ONCE() while at it. %pS is enough.
Reported-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NBorislav Petkov <bp@suse.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1810082151160.2455@nanos.tec.linutronix.deSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f18aef742c8fbd68e280dff0a63ba0ca6ee8ad85 ]

On at least x86 and ARM64, and as documented in the ptrace man page
a skipped system call will still cause a syscall exit ptrace stop.

Previous to this commit 32-bit ARM did not, resulting in strace
being confused when seccomp skips system calls.

This change also impacts programs that use ptrace to skip system calls.

Fixes: ad75b514 ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL")
Signed-off-by: NTimothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: NEugene Syromyatnikov <evgsyr@gmail.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Tested-by: NKees Cook <keescook@chromium.org>
Tested-by: NEugene Syromyatnikov <evgsyr@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 51fbf14f2528a8c6401290e37f1c893a2412f1d3 ]

The only use of KEXEC_BACKUP_SRC_END is as an argument to
walk_system_ram_res():

  int crash_load_segments(struct kimage *image)
  {
    ...
    walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END,
                        image, determine_backup_region);

walk_system_ram_res() expects "start, end" arguments that are inclusive,
i.e., the range to be walked includes both the start and end addresses.

KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the
first address *past* the desired 0-640KB range.

Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC
region is [0-0x9ffff], not [0-0xa0000].

Fixes: dd5f7260 ("kexec: support for kexec on panic using new system call")
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Brijesh Singh <brijesh.singh@amd.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: Lianbo Jiang <lijiang@redhat.com>
CC: Takashi Iwai <tiwai@suse.de>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Vivek Goyal <vgoyal@redhat.com>
CC: baiyaowei@cmss.chinamobile.com
CC: bhe@redhat.com
CC: dan.j.williams@intel.com
CC: dyoung@redhat.com
CC: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/153805811578.1157.6948388946904655969.stgit@bhelgaas-glaptop.roam.corp.google.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b6cbe3e8bdff6f21f1b58b08a55f479cdcf98282 ]

Kasan instrumentation adds "store" check for variables marked as
modified by inline assembly. With user pointers containing addresses
from another address space this produces false positives.

static inline unsigned long clear_user_xc(void __user *to, ...)
{
	asm volatile(
	...
	: "+a" (to) ...

User space access functions are wrapped by manually instrumented
functions in kasan common code, which should be sufficient to catch
errors. So, we just disable uaccess.o instrumentation altogether.
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NVasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0a9b40911baffac6fc9cc2d88e893585870a97f7 ]

Instrumented C code cannot run without the kasan shadow area. Exempt
source code files from kasan which are running before / used during
kasan initialization.
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NVasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 348498458505e202df41b6b9a78da448d39298b7 ]

vdso is mapped into user space processes, which won't have kasan
shodow mapped.
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NVasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e5f3530c391105fdd6174852e3ea6136d073b45a ]

The CBM overlap test is used to manage the allocations of RDT resources
where overlap is possible between resource groups. When a resource group
is in exclusive mode then there should be no overlap between resource
groups.

The current overlap test only considers overlap between the same
resources, for example, that usage of a RDT_RESOURCE_L2DATA resource
in one resource group does not overlap with usage of a RDT_RESOURCE_L2DATA
resource in another resource group. The problem with this is that it
allows overlap between a RDT_RESOURCE_L2DATA resource in one resource
group with a RDT_RESOURCE_L2CODE resource in another resource group -
even if both resource groups are in exclusive mode. This is a problem
because even though these appear to be different resources they end up
sharing the same underlying hardware and thus does not fulfill the
user's request for exclusive use of hardware resources.

Fix this by including the CDP peer (if there is one) in every CBM
overlap test. This does not impact the overlap between resources
within the same exclusive resource group that is allowed.

Fixes: 49f7b4ef ("x86/intel_rdt: Enable setting of exclusive mode")
Reported-by: NJithu Joseph <jithu.joseph@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJithu Joseph <jithu.joseph@intel.com>
Acked-by: NFenghua Yu <fenghua.yu@intel.com>
Cc: tony.luck@intel.com
Cc: gavin.hindman@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/e538b7f56f7ca15963dce2e00ac3be8edb8a68e1.1538603665.git.reinette.chatre@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 521348b011d64cf3febb10b64ba5b472681bef94 ]

Introduce a utility that, when provided with a RDT resource and an
instance of this RDT resource (a RDT domain), would return pointers to
the RDT resource and RDT domain that share the same hardware. This is
specific to the CDP resources that share the same hardware.

For example, if a pointer to the RDT_RESOURCE_L2DATA resource (struct
rdt_resource) and a pointer to an instance of this resource (struct
rdt_domain) is provided, then it will return a pointer to the
RDT_RESOURCE_L2CODE resource as well as the specific instance that
shares the same hardware as the provided rdt_domain.

This utility is created in support of the "exclusive" resource group
mode where overlap of resource allocation between resource groups need
to be avoided. The overlap test need to consider not just the matching
resources, but also the resources that share the same hardware.

Temporarily mark it as unused in support of patch testing to avoid
compile warnings until it is used.

Fixes: 49f7b4ef ("x86/intel_rdt: Enable setting of exclusive mode")
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJithu Joseph <jithu.joseph@intel.com>
Acked-by: NFenghua Yu <fenghua.yu@intel.com>
Cc: tony.luck@intel.com
Cc: gavin.hindman@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/9b4bc4d59ba2e903b6a3eb17e16ef41a8e7b7c3e.1538603665.git.reinette.chatre@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 07e1d88adaaeab247b300926f78cc3f950dbeda3 ]

On 64-bit kernels ptrace can read the FS/GS base using the register access
APIs (PTRACE_PEEKUSER, etc.) or PTRACE_ARCH_PRCTL.

Make both of these mechanisms return the actual FS/GS base.

This will improve debuggability by providing the correct information
to ptracer such as GDB.

[ chang: Rebased and revised patch description. ]
[ mingo: Revised the changelog some more. ]
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NChang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537312139-5580-2-git-send-email-chang.seok.bae@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fa112cf1e8bc693d5a666b1c479a2859c8b6e0f1 ]

When building a 32-bit config which has the above MFD item as module
but OLPC_XO1_PM is enabled =y - which is bool, btw - the kernel fails
building with:

  ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_remove':
  /home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:159: undefined reference to `mfd_cell_disable'
  ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_probe':
  /home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:133: undefined reference to `mfd_cell_enable'
  make: *** [Makefile:1030: vmlinux] Error 1

Force MFD_CS5535 to y if OLPC_XO1_PM is enabled.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20181005131750.GA5366@zn.tnicSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1006284c5e411872333967b1970c2ca46a9e225f ]

When an OS (currently only classic Mac OS) is running in KVM-PR and makes a
linked jump from code with split hack addressing enabled into code that does
not, LR is not correctly updated and reflects the previously munged PC.

To fix this, this patch undoes the address munge when exiting split
hack mode so that code relying on LR being a proper address will now
execute. This does not affect OS X or other operating systems running
on KVM-PR.
Signed-off-by: NCameron Kaiser <spectre@floodgap.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 053c5a753e951c5dd1729af2cf4d8107f2e6e09b ]

Local radix TLB flush operations that operate on congruence classes
have explicit ERAT flushes for POWER9. The process scoped LPID flush
did not have a flush, so add it.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8b78fdb045de60a4eb35460092bbd3cffa925353 ]

We currently cap the decrementer clockevent at 4 seconds, even on systems
with large decrementer support. Fix this by converting the code to use
clockevents_register_device() which calculates the upper bound based on
the max_delta passed in.
Signed-off-by: NAnton Blanchard <anton@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 749fa17093ff67b31dea864531a3698b6a95c26c ]

Currently if get_e820_md5() fails, then it will hibernate nevertheless.
Actually the error code should be propagated to upper caller so that
the hibernation could be aware of the result and terminates the process
if md5 digest fails.
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NChen Yu <yu.c.chen@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f602b4871c5f7ac01d37d8b285ca947ba7613065 ]

The offsets for the bootloader environment and its redundant partition
were inverted. Fix the addresses to match our nand flash map available at:

http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.pngSigned-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NLudovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6f270d88a0c4a11725afd8fd2001ae408733afbf ]

at91sam9x5cm comes with a 2Gb NAND flash. Fix the rootfs size to
match this limit.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NLudovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit df90fc64367ffdb6f1b5c0f0c4940d44832b0174 ]

sama5d4_xplained comes with a 4Gb NAND flash. Increase the rootfs
size to match this limit.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NLudovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cd5ff94577e004e0a4457e70d0ef3a030f4010b8 ]

Move the dereference of xc below the NULL test.
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9258227e9dd1da8feddb07ad9702845546a581c9 ]

When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.

Fixes: 7c105b63 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit db787af1b8a6b4be428ee2ea7d409dafcaa4a43c ]

When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:

	dtl_start: DTL registration for cpu 0 (hw 0) failed with -4

Fix this in the obvious manner.

Fixes: 7c105b63 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4f475e8e0a6d4f5d430350d1f74f7e4899fb1692 ]

A root port Device ID changed between simulation and production.  Rather
than match Device IDs which may not be future-proof if left unmaintained,
match all root ports which exist in a VMD domain.
Signed-off-by: NJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f7960e299f13f069d6f3d4e157d91bfca2669677 ]

We return H_TOO_HARD from TCE update handlers when we think that
the next handler (realmode -> virtual mode -> user mode) has a chance to
handle the request; H_HARDWARE/H_CLOSED otherwise.

This changes the handlers to return H_TOO_HARD on every error giving
the userspace an opportunity to handle any request or at least log
them all.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 77cfe950901e5c13aca2df6437a05f39dd9a929b ]

The dummy node ID is marked into all memory ranges on the system. So the
dummy node really extends the entire memblock.memory. Hence report correct
extent information for the dummy node using memblock range helper functions
instead of the range [0LLU, PFN_PHYS(max_pfn) - 1)].

Fixes: 1a2db300 ("arm64, numa: Add NUMA support for arm64 platforms")
Acked-by: NPunit Agrawal <punit.agrawal@arm.com>
Signed-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit db9fd9d13e30fc67737ac9893a82e6b095e85a64 ]

The external RTL8211E RGMII Ethernet PHY is configured via external
resistors to use the address 0x1. The 0x0 address is a broadcast address
for this family of PHYs, and should not be used explicitly.

Fixes: 8c7ba536 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i")
Fixes: 4904337f ("ARM: dts: sunxi: Restore EMAC changes (boards)")
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6c700289a3e84d5d3f2a95cf27732a7f7fce105b ]

The size of the register should be the size of the whole memory block,
not just the registers, that are needed.
Signed-off-by: NPhilipp Rossak <embed3d@gmail.com>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 656c1a65ab555ee5c7cd0d6aee8ab82ca3c1795f ]

Since SMPS10 and OTG cable detection extcon are described here, and
work to enable OTG power when an OTG cable is plugged in, we can
define OTG mode in the controller (which is disabled by default in
omap5.dtsi).

Tested on OMAP5EVM and Pyra.
Suggested-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b830526f304764753fcb8b4a563a94080e982a6c ]

Add ti,syscon-unaligned-access property to PCIe RC nodes to set
appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for
errata i870.
Signed-off-by: NVignesh R <vigneshr@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 711aef1bbf88212a21f7103e88f397b47a528805 upstream.

The current method to compare 64-bit numbers for conditional jump is:

1) Compare the high 32-bit first.

2) If the high 32-bit isn't the same, then goto step 4.

3) Compare the low 32-bit.

4) Check the desired condition.

This method is right for unsigned comparison, but it is buggy for signed
comparison, because it does signed comparison for low 32-bit too.

There is only one sign bit in 64-bit number, that is the MSB in the 64-bit
number, it is wrong to treat low 32-bit as signed number and do the signed
comparison for it.

This patch fixes the bug and adds a testcase in selftests/bpf for such bug.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205469Reported-by: NTony Ambardar <itugrok@yahoo.com>
Cc: Tony Ambardar <itugrok@yahoo.com>
Cc: stable@vger.kernel.org #v4.19
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>