Move all the NUMAQ subarch definitions into numaq.c. With this it
ceases to depend on build-time subarch features.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- remove macro wrappers
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move its definitions into apic.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move its definitions into mpspec.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the definition to mpparse.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Spread mach_wakecpu.h's definitions into apic.h and genapic.h
and remove mach_wakecpu.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Consolidate all the ES7000 APIC code into arch/x86/mach-generic/es7000.c.

With this ES7000 ceases to rely on any subarchitecture include files.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Nothing exciting - a few subarches dont want APIC remote reads to
be performed - the others are content with the default method.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Nothing actually restores the NMI vector - so remove this
logic altogether.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
store and restore the NMI vector.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
reset the APIC.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per APIC driver basis

 - handle a NULL ->wait_for_init_deassert() as a 'dont wait' default method

 - remove NUMAQ and Summit handlers
Signed-off-by: NIngo Molnar <mingo@elte.hu>

64-bit x86 has zero for ->trampoline_phys_low/high, but the smpboot
code can use these values - so it's better to set them up to their
correct values.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per apic driver basis

 - remove wrapper macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Our send_IPI_*() methods and definitions are a twisted mess: the same
symbol is defined to different things depending on .config details,
in a non-transparent way.

 - spread out the quirks into separately named per apic driver methods

 - prefix the standard PC methods with default_

 - get rid of wrapper macro obfuscation

 - clean up various details
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - clean up the functions

 - get rid of macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Remove the *_APIC_ID_MASK subarch definitions and move them straight
to the genapic driver initialization code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - get rid of wrapper macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace on a per driver basis

 - get rid of macro wrappers

 - small cleanups
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the mps_oem_check() namespace on a per APIC driver basis
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Call all the registered MPS quirk handlers early. These methods scan
low RAM typically for specific signatures so are safe to be called
early.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

 - allow NULL ->mps_oem_check() entries

 - clean up the code flow
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Refactor the ->phys_pkg_id() methods:

 - namespace separation

 - macro wrapper removal

 - open-coded calls to the methods in the generic code
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- unify the call signature of 64-bit to that of 32-bit

 - clean up the types all around

 - clean up namespace contamination
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- eliminate the needless es7000_enable_apic_mode() complication which
  was not apparent prior the namespace cleanups

- clean up the control flow in es7000_enable_apic_mode()

- other cleanups
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only ES7000 has a real ->enable_apic_mode() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- spread out the namespace to per driver methods

 - extend it to 64-bit as well so that we can use
   apic->check_phys_apicid_present() unconditionally
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Only NUMAQ has a real ->setup_portio_remap() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.

Also move the NUMAQ method from the header file into the
 apic driver .c file.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

only NUMAQ uses this quirk: to prevent the timer IRQ from being added
on secondary nodes.

All other genapic templates can have a NULL ->multi_timer_check()
callback.

Also, extend the generic code to treat a NULL pointer accordingly.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros

 - remove namespace clash on 64-bit
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- separate the namespace

 - remove macros

 - move the default vector-allocation-domain to mach-generic

 - fix whitespace damage
Signed-off-by: NIngo Molnar <mingo@elte.hu>

These flags are completely unused. (the in-kernel IRQ balancer has
been removed from the upstream kernel.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean up these methods - to make it clearer which function is
used in which case.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This field name was unreasonably long - shorten it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>