CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB.

But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB
or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver.

The reference in cx23885.h should just be removed, as the code there needs to
be included if DVB is on or off.  I do not think you can even compile the
cx23885 driver without DVB.  It's clearly just leftover from when the file was
obvious copied from the cx88 driver (which is not mentioned in the copyright
BTW).
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Here's an attempted update to the full kthread API + wake_up_process:
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
CC: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If videobuf_read_stream reads two or more buffers it was overwriting the first one
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

Vivi driver is now simpler. This patch removes the now unused vars.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The reading/streaming fields are used for mutual exclusion of the queue and
should be protected by the queue lock.
Signed-off-by: NBrandon Philips <bphilips@suse.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

The "resource" locking in vivi isn't needed since
streamon/streamoff/read_stream do mutual exclusion using
q->reading/q->streaming.

Plus it is sort of broken:

a) res_locked() use in vivi_read() is racey.
b) res_free() calls mutex_lock twice causing streamoff to break
Signed-off-by: NBrandon Philips <bphilips@suse.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Since vivi is using videobuf_read_stream() it can use videobuf_poll_stream()
now.
Signed-off-by: NBrandon Philips <bphilips@suse.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If the client provides V4L2_FIELD_ANY vivi should return a valid field :)
Signed-off-by: NBrandon Philips <bphilips@suse.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

By "capturing interlaced video" I mean that card ensures that top field
is really top and vice versa (I think it takes the filed ID from signal)
Properly turn on/off that support depending on signal state
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This adds support for suspend/resume for core of saa7134

Should fix bug#7220
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When user sets dev->ctl_invert, driver writes negative values to
SAA7134_DEC_LUMA_CONTRAST and SAA7134_DEC_CHROMA_SATURATION,
but general code that initializes decorder ignores that
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

set_tvnorm can sleep in saa7134_i2c_xfer
(it will be called through tuner code)
but code calls it under spinlock. Fix that
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

videobuf_qbuf takes q->lock, and then calls
q->ops->buf_prepare which by design in all drivers calls
videobuf_iolock which calls videobuf_dma_init_user and this
takes current->mm->mmap_sem

on the other hand if user calls mumap from other thread, sys_munmap
takes current->mm->mmap_sem and videobuf_vm_close takes q->lock

Since this can occur only for V4L2_MEMORY_MMAP buffers, take
current->mm->mmap_sem in qbuf, before q->lock, and don't take
current->mm->mmap_sem videobuf_dma_init_user for those buffers
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

While this is not the standard color bar behaviour, having some movement
there allows to check if buffers are being properly handled.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Release code should happen before the cleaning of map variable.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Michael Krufky for pointing this to me.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Due to the replace of videobuf_read_one to videobuf_read_stream, poll()
method implementation is wrong. This fixes poll() implementation, making
read of /dev/video? to work again.

With this method, an USB driver can use video-buf, without needing to
request memory from the DMA-safe area.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

This patch removes the usage of videobuf-dma-sg from vivi driver, using
instead videobuf-vmalloc. This way, vivi will be useful for testing the
newer method. Reverting this patch won't hurt vivi, since both methods
work fine.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Adds a newer videobuf-vmalloc module. This module uses the same
videobuf controls, but implements memory allocation based on vmalloc
methods.

With this method, an USB driver can use video-buf, without needing to
request memory from the DMA-safe area.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo.

Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct.
So, to access it, a subroutine call is needed.

This patch renames all occurences of those function calls to be
consistent with the video-buf split.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

video-buf currently does two different tasks:

- Manages video buffers with a common code that allows
  implementing all the V4L2 different modes of buffering;

- Controls memory allocations

While the first task is generic, the second were written to support PCI DMA
Scatter/Gather needs. The original approach can't even work for those
video capture hardware that don't support scatter/gather.

I did one approach to make it more generic. While the approach worked
fine for vivi driver, it were not generic enough to handle USB needs.

This patch creates two different modules, one containing the generic
video buffer handling (videobuf-core) and another with PCI DMA S/G.
After this patch, it would be simpler to write an USB video-buf and a
non-SG DMA module.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

coding-style repairs
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Adds an entry for the Typhoon Tv-Tuner PCI to bttv-cards.c
Signed-off-by: NSascha Sommer <saschasommer@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

IR workqueue should be disabled during suspend. This avoids some troubles, like
the one reported on bug #8689:

"The Hauppauge HVR 1100 ir-remote control does not work after resume from
suspend to ram or disk."

This patch disables IR before suspending, re-enabling it after resume.

Thanks to Peter Poklop <Peter.Poklop@gmx.at> for reporting it and helping with
the fix.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Reviewed-by: NPeter Poklop <Peter.Poklop@gmx.at>

Redoes the way the control word is stored and set.
The existing code was a lot more complicated than it needed to be.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Reviewed-by: NPekka Seppänen <pexu@kapsi.fi>

Frequency calculation to use better math.  It's still the same
IF offset and step size (which are not the same as the datasheet says) as
the code was before.  It's just more efficient and accurate.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Reviewed-by: NPekka Seppänen <pexu@kapsi.fi>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Code cleanup for GemTek Radio card driver. Removed unnecessary / invalid
I/O commands and rewrote code for tuning on-board BU2614FS chip. Adds
several new module params for power users. Includes automatic device
probing.
Signed-off-by: NPekka Seppanen <pexu@kapsi.fi>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Reviewed-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Details now match with radio-gemtek.c, eg. no more different ports.
Included a short note about cards that should be compatible with
radio-gemtek module.
Signed-off-by: NPekka Seppanen <pexu@kapsi.fi>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Reviewed-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

s/driver/drives/1
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fixes use of parport_write_control() to match the newer interface that
requires explicit parport_data_reverse() and parport_data_forward() calls.
This eliminates the following error message and restores the original
intended behavior:

parport0 (bw-qcam): use data_reverse for this!

Also increases threshold in qc_detect() from 300 to 400, as my camera often
results in a count of approx 330.  Added a kernel error message to indicate
detection failure.

Thanks Ray and Randy for your comments, and for pointing out that I
needed to reset the port to forward mode!
Signed-off-by: NBrett T. Warden <brett.warden@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pwc driver is defficient in locking, which can trigger an oops
when disconnecting.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
CC: Luc Saillard <luc@saillard.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

By default, we allocate DMA buffers when actually reading from the video
capture device.  On a system with 128MB or 256MB of ram, it's very easy
for that memory to quickly become fragmented.  We've had users report
having 30+MB of memory free, but the cafe_ccic driver is still unable to
allocate DMA buffers.

Our workaround has been to make use of the 'alloc_bufs_at_load' parameter
to allocate DMA buffers during device probing.  This patch makes DMA
buffer allocation happen during device probe by default, and changes
the parameter to 'alloc_bufs_at_read'.  The camera hardware is there,
if the cafe_ccic driver is enabled/loaded it should do its best to ensure
that the camera is actually usable; delaying DMA buffer allocation
saves an insignicant amount of memory, and causes the driver to be much
less useful.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>