This patch adds back MMC cover switch support in a way that
supports multiple slots.
Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Introduce new MMC multislot structure and change driver to use it.

Note that MMC clocking is now enabled in mmc_omap_select_slot()
and disabled in mmc_omap_release_slot().
Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

This patch removes the MMC cover switch handling temporarily
to make following multislot patches cleaner.

MMC cover switch handling will be added back in later patches
after adding basic multislot support.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

According with commit 255d01af
from Linux-OMAP tree, the BYTEBLOCK capability was removed by Pierre Ossman.
MMC_CAP_BYTEBLOCK is not defined causing the compile error:

drivers/mmc/host/omap.c: In function `mmc_omap_probe':
drivers/mmc/host/omap.c:1077: error: `MMC_CAP_BYTEBLOCK' undeclared (first use in this function)
drivers/mmc/host/omap.c:1077: error: (Each undeclared identifier is reported only once
drivers/mmc/host/omap.c:1077: error: for each function it appears in.)
Signed-off-by: NFrancisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

As noted by Kyungmin Park, the divisor calculation has
an unnecessary increase.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

This patch removes some opcodes from host driver so there's no need on putting
'#include <linux/mmc/mmc.h>', that should not be needed in host drivers.
Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Hook up the controller LED to the LED subsystem, allowing more flexible
control than simply indicating an ongoing request.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Remove the use of the sdhci specific device name and use the mmc controller
name instead.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Reorganise code so that mmc_hostname() works directly after allocation.
That way host drivers can use that name for resource allocations and
messages during probing.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

* Use ide_default_irq() instead of ide_init_default_irq() in
  ide_generic host driver (so the correct IRQ is always set
  regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI).

* Remove no longer needed ide_init_default_irq() macro.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make CONFIG_IDE_GENERIC depended on CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS.

* Move default IDE ports setup from init_ide_data() to ide_generic.

* Use ide_init_port_hw() in ide_generic.

* Remove no longer needed CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "idex=noprobe" kernel parameter.

* Remove no longer needed hwif->noprobe quirk from ide_hwif_configure()
  and hwif->noprobe checking from cmd640.c.

v2:
* "ide?=noprobe" -> "ide?=ata66" in Documentation/kernel-parameters.txt.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_init_default_irq() is always zero for CONFIG_PCI=y so hwif->irq
check in ide_hwif_configure() can be safely removed.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Do explicit port setup in legacy VLB host drivers instead of depending
on init_ide_data().  This way hwif->io_ports[] and hwif->irq are always
correctly set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

These host drivers indirectly depend on CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y
which is defined only on alpha, x86, ia64, m32r, mips and ppc32.

Moreover:

- on ia64 there is no ISA

- m32r is too new for VLB

- on ppc32 ISA is available only on PPC_CHRP (no default IDE ports)
  and PPC_PREP (marked as BROKEN)

[ the common sense tells me that VLB was only used on x86 but there
  are urban legends that one of these host drivers was needed on some
  other arch - thus the extra care ]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Do explicit port setup instead of depending on init_ide_data().

This way hwif->io_ports[] and hwif->irq are always correctly set
regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI.

While at it fix printk().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This loop is no longer needed.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

CONFIG_BLK_DEV_4DRIVES deserves its own host driver:

* Add drivers/ide/legacy/ide-4drives.c and move "4drives" support there.

* Add ide-4drives.o in the link order after all other legacy host
  drivers enabled by "ide0=" options (they all are mutually exclusive).

* Make ide-4drives host driver probe itself for IDE devices instead of
  indirectly depending on ide_generic host driver.

* Add "probe" module parameter to ide-4drives and update documentation.

v2:
* s/paramater/parameter/ in ide.txt. (Noticed by Randy Dunlap)

v3:
* s/ide_4drives.probe/ide-4drives.probe/ in help entry.
  (Noticed by Sergei Shtylyov)
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On PPC32 ide_init_default_irq() is non-zero only for PPLUS and PPC_PREP
(the latter marked as BROKEN currently) so this ifdef can be removed.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

It is always == '((base) + 0x206)' if CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y
and it is not needed otherwise (arm, blackfin, parisc, ppc64, sh, sparc[64]).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS instead of
  CONFIG_IDE_ARCH_OBSOLETE_INIT in init_ide_data().

* Remove no longer needed CONFIG_IDE_ARCH_OBSOLETE_INIT.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS to drivers/ide/Kconfig and use
  it instead of defining IDE_ARCH_OBSOLETE_DEFAULTS in <arch/ide.h>.

v2:
* Define ide_default_irq() in ide-probe.c/ns87415.c if not already defined
  and drop defining ide_default_irq() for CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=n.

  [ Thanks to Stephen Rothwell and David Miller for noticing the problem. ]

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add special cases for pplus and prep to ide_default_{irq,io_base}()
  (+ FIXMEs about the need to use IDE platform host driver instead).

* Remove no longer needed ppc_ide_md and struct ide_machdep_calls.

* Then remove <linux/ide.h> include from:
  - arch/powerpc/kernel/setup_32.c
  - arch/ppc/kernel/ppc_ksyms.c
  - arch/ppc/kernel/setup.c
  - arch/ppc/platforms/pplus.c
  - arch/ppc/platforms/prep_setup.c

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Call ide_init_default_irq() for pplus in init_ide_data().

* Remove no longer needed pplus_ide_init_hwif_ports().

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag for Motorola-Sandpoint platform
  to sl82c105 host driver.

* Disable ide_generic host driver in arch/ppc/configs/sandpoint_defconfig
  and enable sl82c105 one.

* Remove ppc_ide_md hooks from arch/ppc/platforms/sandpoint.c - no need for
  them (sl82c105 host driver takes care of all this setup).

* Then remove no longer needed <linux/ide.h> include.

* Also update arch/ppc/platforms/sandpoint.h.

Unfortunately (unlike lopec's case) sl82c105 host driver was not enabled
in defconfing so there is a funcionality change.

[ Not a big deal since sl82c105 is superior over ide_generic. ]

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag for Motorola-LoPEC platform
  to sl82c105 host driver.

* Remove ppc_ide_md hooks from arch/ppc/platforms/lopec.c - no need for
  them (sl82c105 host driver takes care of all this setup).

* Then remove no longer needed <linux/ide.h> include.

Looking at arch/ppc/configs/lopec_defconfig:

...
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_SL82C105=y
...

there should be no functional changes unless somebody preferred to disable
sl82c105 host driver and use only ide_generic one (but why would anybody
want to do such thing :-).

PS It seems that lopec_defconfig hasn't been updated for ages but if somebody
is going to do it please look into disabling IDE_GENERIC and BLK_DEV_GENERIC
config options.  Thanks.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Initialize IDE ports in mpc8xx_ide_probe().

* Remove m8xx_ide_init() and ppc_ide_md hooks - no need for them
  (IDE mpc8xx host driver takes care of all this setup).

* Remove needless 'if (irq)' and 'if (data_port >= MAX_HWIFS)' checks
  from m8xx_ide_init_hwif_ports().

* Remove 'ctrl_port' and 'irq' arguments from m8xx_ide_init_hwif_ports().

* Rename m8xx_ide_init_hwif_ports() to m8xx_ide_init_ports().

* Add __init tag to m8xx_ide_init_ports().

This patch fixes hwif->irq always being overriden to 0 (== auto-probe, is
this even working on PPC?) because of ide_init_default_irq() call in ide.c.

There should be no other functional changes.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NVitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add pmac_ide_init_ports() helper and use it instead of
  pmac_ide_init_hwif_ports().

* Remove ppc_ide_md hooks - no need for them
  (IDE pmac host driver takes care of all this setup).

* Then remove no longer needed <linux/ide.h> include
  from arch/powerpc/platforms/powermac/pmac.h.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove unused pmac_ide_{check_base,get_irq}() and pmac_find_ide_boot(),
then remove no longer needed ide_majors[] and pmac_ide_count.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

...also, convert ide-scsi to using the generic pc->flags defines.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

mv idefloppy_do_end_request -> idefloppy_end_request as is the case with ide-cd
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Removing the atomic tests for pc's is unobjectionable. Since this driver will
probably go to /dev/null soon, the atomic tests for tape->flags are left in
place for there are some situations where they're needed (chrdev DSC handling,
low level pipeline operation and so on). While at it, rename all test/set flag
bit defines explicitly to *_FLAG_* for clarity.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Bart:
- no need to move defines for tape flags around
  (they are completely rewritten by the next patch)
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines.

* Remove IDE_*_REG macros - this results in more readable
  and slightly smaller code.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_atapi_{discard_data,write_zeros} inline helpers to <linux/ide.h>
and use them instead of home-brewn helpers in ide-{floppy,tape,scsi}.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>