- 20 5月, 2011 1 次提交
-
-
由 Olivier Grenie 提交于
This patch removes the remaining on-stack buffer for USB DMA transfer. This patch also reduces the stack memory usage. Cc: stable@kernel.org Cc: Florian Mickler <florian@mickler.org> Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 22 3月, 2011 4 次提交
-
-
由 Dan Carpenter 提交于
kfree(state) if fe allocation fails. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Something went wrong with the alignments for the if clause at line 2113. Instead of using one tab for alignments, it used 3 tabs, plus one space character. WARNING: suspect code indent for conditional statements (8, 33) + if ((state->fe[0]->dtv_property_cache.delivery_system != SYS_ISDBT) || [...] + int i = 80000; WARNING: suspect code indent for conditional statements (33, 41) + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + dib8000_set_bandwidth(state->fe[index_frontend], fe->dtv_property_cache.bandwidth_hz / 1000); WARNING: suspect code indent for conditional statements (33, 41) + do { + msleep(20); WARNING: suspect code indent for conditional statements (41, 49) + for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { + if (((tune_failed >> index_frontend) & 0x1) == 0) { WARNING: suspect code indent for conditional statements (49, 57) + if (((tune_failed >> index_frontend) & 0x1) == 0) { + found = dib8000_autosearch_irq(state->fe[index_frontend]); WARNING: suspect code indent for conditional statements (41, 49) + if ((nbr_pending == 0) && (exit_condition == 0)) + exit_condition = 1; Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
This patchs fix several conding-style violations. Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
This patch adds a set a functions which allow the handling of multiple demodulator in a diversity reception chain. Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 27 2月, 2010 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 16 12月, 2009 5 次提交
-
-
由 Márton Németh 提交于
Eliminate the following sparse warnings (see "make C=1"): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? * dib8000.c:134:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:139:15: warning: symbol 'coeff_2k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:144:15: warning: symbol 'coeff_2k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:149:15: warning: symbol 'coeff_2k_sb_3seg' was not declared. Should it be static? * dib8000.c:154:15: warning: symbol 'coeff_4k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:159:15: warning: symbol 'coeff_4k_sb_1seg' was not declared. Should it be static? * dib8000.c:164:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:169:15: warning: symbol 'coeff_4k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:174:15: warning: symbol 'coeff_4k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:179:15: warning: symbol 'coeff_4k_sb_3seg' was not declared. Should it be static? * dib8000.c:184:15: warning: symbol 'coeff_8k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:189:15: warning: symbol 'coeff_8k_sb_1seg' was not declared. Should it be static? * dib8000.c:194:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk_1dqpsk' was not declared. Should it be static? * dib8000.c:199:15: warning: symbol 'coeff_8k_sb_3seg_0dqpsk' was not declared. Should it be static? * dib8000.c:204:15: warning: symbol 'coeff_8k_sb_3seg_1dqpsk' was not declared. Should it be static? * dib8000.c:209:15: warning: symbol 'coeff_8k_sb_3seg' was not declared. Should it be static? * dib8000.c:214:15: warning: symbol 'ana_fe_coeff_3seg' was not declared. Should it be static? * dib8000.c:218:15: warning: symbol 'ana_fe_coeff_1seg' was not declared. Should it be static? * dib8000.c:222:15: warning: symbol 'ana_fe_coeff_13seg' was not declared. Should it be static? Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Márton Németh 提交于
Merge two ifs: the condition is the same. The second if uses the ncoeff which is initialized in the first if. Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
Enhance status lock behaviour. Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
This patch changes most of the Codingstyle violations which were introduced by the previous patch. Line length less that 80 chars are not corrected. Signed-off-by: NOlivier Grenie <Olivier.Grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
This patchs adds support for the DiBcom DiB0090 RF tuner and for DiBcom's reference design STK8096GP. Small extracts of the DiB0070 and the DiB8000-driver into a common codebase. Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NOlivier Grenie <Olivier.Grenie@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 12月, 2009 2 次提交
-
-
由 Hans Verkuil 提交于
Trivial fix for this bogus compile warning: v4l/dib8000.c:958: warning: 'ncoeff' may be used uninitialized in this function Note: ncoeff is never used uninitialized, but the compiler couldn't figure that out. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
dib7000p/dib8000: added pid filtering dib8000: the SNR is in 10th of dB (not in dB) dib7000p and dib8000: added the pid filtering. This feature is enabled by module option (dvb-usb module). Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 9月, 2009 2 次提交
-
-
由 Patrick Boettcher 提交于
This patch is fixing the initialization of the channel search parameters. Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Patrick Boettcher 提交于
This commit adds support for the DiB8000 ISDB-T demodulator made by DiBcom. Signed-off-by: NOlivier Grenie <Olivier.Grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-