- 11 9月, 2006 7 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3778/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [simtec] [ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling [ARM] 3779/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [left] [ARM] 3777/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [regs-*.h] [ARM] 3776/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [ARM] 3775/1: S3C24XX: do not add same sysdev_driver to two classes [ARM] 3774/1: S3C24XX: SMDK2413 has two machine IDs [ARM] 3773/1: Add the HWCAP_VFP bit for the ARM926 CPUs [ARM] 3772/1: Fix compilation error in mach-ixp4xx/nslu2* [ARM] 3767/1: S3C24XX: remove changelog comments from arch/arm/mach-s3c2410 [ARM] 3766/1: Fix typo in ARM _raw_read_trylock
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Fix dm9000 release_resource
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ata_piix: add map 01b for ICH7M [libata] sata_mv: errata check buglet fix
-
由 Alan Cox 提交于
There are two changes here. The first reverses the broken PCI_DEVICE conversion back to the old format. The second adds a missing PCI ID so you can actually boot 2.6.18 on 2 month old VIA motherboards (right now only 2.6.18-mm works). CC'd to Jeff to check the PCI ident but its a) in several distro kernels and b) in 2.6.18-mm [twice ??] Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dirk Opfer 提交于
dm9000_release_board calls release_resource with the platform resource instead of the requested resource: db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); db->addr_req = request_mem_region(db->addr_res->start, i, pdev->name); dm9000_release_board: if (db->addr_res != NULL) { release_resource(db->addr_res); kfree(db->addr_req); With this behavior the kernel will crash on the second removal. The attached patch fix this problem. Signed-off-by: NDirk Opfer <Dirk@Opfer-Online.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Although the document says otherwise, some ich7m uses map 01b. This patch adds separate map DB for ICH7M and adds map entry for 01b. This was spotted on an ASUS laptop by Jonathan Dieter. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Jonathan Dieter <jdieter@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Andres Salomon 提交于
Fix a buglet; the errata check below this code is assuming the value in the sstatus variable is what was pulled out of the SCR_STATUS register. However, the status checks in the timeout loop clobber everything but the first 4 bits of sstatus, so the errata checks are invalid. This patch changes it to not clobber SStatus. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 10 9月, 2006 6 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Remove changelog entries from include/asm-arm/arch-s3c2410 for all simtec .h files as these are irrelevant with version control. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The IRQ_EINT0 through IRQ_EINT3 handling has changed on the S3C2412 from the previous SoCs in the range, and thus we need to add code to handle this. The changes come about due to these IRQs being displayed in two different registers, and needing to be acked and masked in both. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Remove the last of the hangelogs from include/asm-arm/arch-s3c2410, as this information is available from the revision control system Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Remove changelog entries from include/asm-arm/arch-s3c2410 for all regs-*.h as these are irrelevant with version control Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Remove changelog entries from include/asm-arm/arch-s3c2410 as these are irrelevant with version control Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The s3c244x-irq.c code makes the mistake of adding the same drive to two different sys-classes. This causes the class lists to become corrupted and the suspend code to OOPS. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 9月, 2006 11 次提交
-
-
由 Jack Steiner 提交于
The sn_cpu_init() is required for cpu initialization on SN platforms. Change __init to __cpuinit so that the function is not freed with init code/data. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jack Steiner 提交于
The SN PROM uses the register stack in the slave loop. The contents must be preserved for the OS to return to the slave loop via offlining a cpu or for kexec. A 'flushrs" is needed to force the stack to be written to memory prior to changing bspstore. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Andreas Schwab 提交于
The syscalls set/get_robust_list must not be wired up until futex_atomic_cmpxchg_inatomic is implemented. Otherwise the kernel will hang in handle_futex_death. Signed-off-by: NAndreas Schwab <schwab@suse.de> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Stephane Eranian 提交于
Fix a bug in sys_perfmonctl() whereby it was not correctly decrementing the file descriptor reference count. Signed-off-by: Nstephane eranian <eranian@hpl.hp.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Trond Myklebust 提交于
The logic in nfs_direct_read_schedule and nfs_direct_write_schedule can allow data->npages to be one larger than rpages. This causes a page pointer to be written beyond the end of the pagevec in nfs_read_data (or nfs_write_data). Fix this by making nfs_(read|write)_alloc() calculate the size of the pagevec array, and initialise data->npages. Also get rid of the redundant argument to nfs_commit_alloc(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
If a CPU faults this page into pagetables after invalidate_mapping_pages() checked page_mapped(), invalidate_complete_page() will still proceed to remove the page from pagecache. This leaves the page-faulting process with a detached page. If it was MAP_SHARED then file data loss will ensue. Fix that up by checking the page's refcount after taking tree_lock. Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Badari Pulavarty 提交于
It has been reported that ext3_getblk() is not doing the right thing and triggering following WARN(): BUG: warning at fs/ext3/inode.c:1016/ext3_getblk() <c01c5140> ext3_getblk+0x98/0x2a6 <c03b2806> md_wakeup_thread+0x26/0x2a <c01c536d> ext3_bread+0x1f/0x88 <c01cedf9> ext3_quota_read+0x136/0x1ae <c018b683> v1_read_dqblk+0x61/0xac <c0188f32> dquot_acquire+0xf6/0x107 <c01ceaba> ext3_acquire_dquot+0x46/0x68 <c01897d4> dqget+0x155/0x1e7 <c018a97b> dquot_transfer+0x3e0/0x3e9 <c016fe52> dput+0x23/0x13e <c01c7986> ext3_setattr+0xc3/0x240 <c0120f66> current_fs_time+0x52/0x6a <c017320e> notify_change+0x2bd/0x30d <c0159246> chown_common+0x9c/0xc5 <c02a222c> strncpy_from_user+0x3b/0x68 <c0167fe6> do_path_lookup+0xdf/0x266 <c016841b> __user_walk_fd+0x44/0x5a <c01592b9> sys_chown+0x4a/0x55 <c015a43c> vfs_write+0xe7/0x13c <c01695d4> sys_mkdir+0x1f/0x23 <c0102a97> syscall_call+0x7/0xb Looking at the code, it looks like it's not handle HOLE correctly. It ends up returning -EIO. Here is the patch to fix it. If we really want to be paranoid, we can allow return values 0 (HOLE), 1 (we asked for one block) and return -EIO for more than 1 block. But I really don't see a reason for doing it - all we need is the block# here. (doesn't matter how many blocks are mapped). ext3_get_blocks_handle() returns number of blocks it mapped. It returns 0 in case of HOLE. ext3_getblk() should handle HOLE properly (currently its dumping warning stack and returning -EIO). Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Acked-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Wang 提交于
New SiS south bridge device ID is 0x966. Next coming product will be 0x968. (Will be released in Q4, this year) We don't make any updates to the IDE controller. Signed-off-by: NDavid Wang <touch@sis.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Not that it passes allmodconfig without it... Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Mark Haverkamp <markh@osdl.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Sergey Vlasov reported that his "FUJITSU MCC3064AP, ATAPI OPTICAL drive" pops up as UNKNOWN in /proc/ide/*/media . Closes #4145. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Gleixner 提交于
The current implementation of futex_lock_pi returns -ERESTART_RESTARTBLOCK in case that the lock operation has been interrupted by a signal. This results in a return of -EINTR to userspace in case there is an handler for the signal. This is wrong, because userspace expects that the lock function does not return in any case of signal delivery. This was not caught by my insufficient test case, but triggered a nasty userspace problem in an high load application scenario. Unfortunately also glibc does not check for this invalid return value. Using -ERSTARTNOINTR makes sure, that the interrupted syscall is restarted. The restart block related code can be safely removed, as the possible timeout argument is an absolute time value. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 9月, 2006 1 次提交
-
-
由 Kirill Korotaev 提交于
This prevents cross-region mappings on IA64 and SPARC which could lead to system crash. They were correctly trapped for normal mmap() calls, but not for the kernel internal calls generated by executable loading. This code just moves the architecture-specific cross-region checks into an arch-specific "arch_mmap_check()" macro, and defines that for the architectures that needed it (ia64, sparc and sparc64). Architectures that don't have any special requirements can just ignore the new cross-region check, since the mmap() code will just notice on its own when the macro isn't defined. Signed-off-by: NPavel Emelianov <xemul@openvz.org> Signed-off-by: NKirill Korotaev <dev@openvz.org> Acked-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> [ Cleaned up to not affect architectures that don't need it ] Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 9月, 2006 15 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks It turns out we have both SMDK2413 and S3C2413 for the same board. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas The ARM926EJ-S CPU has the VFP coprocessor and therefore it should be shown in the /proc/cpuinfo if CONFIG_VFP is enabled. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Martin Michlmayr 提交于
Patch from Martin Michlmayr Include linux/irq.h in the nslu2 code in order to avoid the following compiler error: CC arch/arm/mach-ixp4xx/nslu2-power.o arch/arm/mach-ixp4xx/nslu2-power.c: In function 'nslu2_power_init': arch/arm/mach-ixp4xx/nslu2-power.c:53: warning: implicit declaration of function 'set_irq_type' arch/arm/mach-ixp4xx/nslu2-power.c:53: error: 'IRQ_TYPE_LEVEL_LOW' undeclared (first use in this function) arch/arm/mach-ixp4xx/nslu2-power.c:53: error: (Each undeclared identifier is reported only once arch/arm/mach-ixp4xx/nslu2-power.c:53: error: for each function it appears in.) arch/arm/mach-ixp4xx/nslu2-power.c:54: error: 'IRQ_TYPE_LEVEL_HIGH' undeclared (first use in this function) make[5]: *** [arch/arm/mach-ixp4xx/nslu2-power.o] Error 1 Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Remove the pointless changelog comments from arch/arm/mach-s3c2410 files, as all this can be found from the revision control system. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas A comma was missing between tmp and tmp2. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] myri10ge: update the firmware download URL in Kconfig
-
由 john stultz 提交于
Use the generic time stuff for FRV. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-Off-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ismail Donmez 提交于
linux/device.h header is not included in the David Woodhouse's kernel-headers git tree which is used for userspace kernel headers. Which results in compile errors when building iproute2. Attached patch moves linux/device.h include under the #ifdef __KERNEL__ section. Signed-off-by: NIsmail Donmez <ismail@pardus.org.tr> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Remove an unintended console_verbose() side-effect from add_taint(). Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
PAE + swsusp results in hard-to-debug crash about 50% of time during resume. Cause is known, fix needs to be ported from x86-64 (but we can't make it to 2.6.18, and I'd like this to be worked around in 2.6.18). Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Gleixner 提交于
Frank v. Waveren pointed out that on 64bit machines the timespec to ktime_t conversion might overflow. This is also true for timeval to ktime_t conversions. This breaks a "sleep inf" on 64bit machines. While a timespec/timeval with tx.sec = MAX_LONG is valid by specification the internal representation of ktime_t is based on nanoseconds. The conversion of seconds to nanoseconds overflows for seconds values >= (MAX_LONG / NSEC_PER_SEC). Check the seconds argument to the conversion and limit it to the maximum time which can be represented by ktime_t. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Frank v Waveren <fvw@var.cx> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Henrik Kretzschmar 提交于
Adds kernel-doc for alloc_super() type in fs/super.c. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Henrik Kretzschmar 提交于
Fixes an error message on make xmldocs. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jarek Poplawski 提交于
With CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_LOCKDEP=y CONFIG_DEBUG_LOCK_ALLOC=y # CONFIG_PROVE_LOCKING is not set spin_unlock_irqrestore() goes through lockdep but spin_lock_irqsave() doesn't. Apparently, bad things happen. Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-