Pile of fixes for either 4.2 issues or cc: stable. This should fix the 2nd
kind of WARNING Linus's been seeing, please ask him to scream if that's
not the case.

* tag 'drm-intel-fixes-2015-07-09' of git://anongit.freedesktop.org/drm-intel:
  Revert "drm/i915: Allocate context objects from stolen"
  drm/i915: Declare the swizzling unknown for L-shaped configurations
  drm/i915: Use crtc_state->active in primary check_plane func
  drm/i915: Check crtc->active in intel_crtc_disable_planes
  drm/i915: Restore all GGTT VMAs on resume
  drm/i915/chv: fix HW readout of the port PLL fractional divider

Merge tag 'drm-amdkfd-fixes-2015-07-09' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes

A single fix so far for 4.2:
- checking a pointer is not null before using it

* tag 'drm-amdkfd-fixes-2015-07-09' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: validate pdd where it acquired first

radeon and amdgpu fixes for 4.2.  All over the place:
- fix cursor corruption on resume and re-enable no VT switch on suspend
- vblank fixes
- fix gpuvm error messages
- misc other fixes

* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: disable vce init on cayman (v2)
  drm/amdgpu: fix timeout calculation
  drm/radeon: check if BO_VA is set before adding it to the invalidation list
  drm/radeon: allways add the VM clear duplicate
  Revert "Revert "drm/radeon: dont switch vt on suspend""
  drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor()
  drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2)
  drm/radeon: Clean up reference counting and pinning of the cursor BOs
  drm/radeon: fix underflow in r600_cp_dispatch_texture()
  drm/radeon: default to 2048 MB GART size on SI+
  drm/radeon: fix HDP flushing
  drm/radeon: use RCU query for GEM_BUSY syscall
  drm/amdgpu: Handle irqs only based on irq ring, not irq status regs.
  drm/radeon: Handle irqs only based on irq ring, not irq status regs.

Merge hpfs updates from Mikulas Patocka.

Mainly fstrim support, with some minor other cleanups.

These were actually sent during the merge window, but I wanted to wait
for the FSTRIM compat handling cleanup before applying them.  Mikulas
sent that earlier today.

* emailed patches from Mikulas Patocka <mikulas@twibright.com>:
  hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead
  hpfs: kstrdup() out of memory handling
  hpfs: Remove unessary cast
  hpfs: add fstrim support

Removing unnecessary static buffers is good.
Use the vsprintf %pV extension instead.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMikulas Patocka <mikulas@twibright.com>
Cc: stable@vger.kernel.org      # v2.6.36+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a possibility of nothing being allocated to the new_opts in
case of memory pressure, therefore return ENOMEM for such case.
Signed-off-by: NSanidhya Kashyap <sanidhya.gatech@gmail.com>
Signed-off-by: NMikulas Patocka <mikulas@twibright.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid a pointless kmem_cache_alloc() return value cast in
fs/hpfs/super.c::hpfs_alloc_inode()
Signed-off-by: NFiro Yang <firogm@gmail.com>
Signed-off-by: NMikulas Patocka <mikulas@twibright.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for fstrim to the HPFS filesystem.
Signed-off-by: NMikulas Patocka <mikulas@twibright.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull Ceph fixes from Sage Weil:
 "There is a fix for CephFS and RBD when used within containers/namespaces,
   and a fix for the address learning the client is supposed to do when
  initially talking to the Ceph cluster.

  There are also two patches updating MAINTAINERS.  One breaks out the
  common Ceph code shared by fs/ceph and drivers/block/rbd.c into a
  separate entry with the appropriate maintainers listed.  The second
  adds a second reference to the github tree where the Ceph client
  development takes place (before it is pushed to korg and then to you).

  The goal here is to move closer to a situation where Ilya Dryomov or
  one of the other maintainers can push things to you if I am
  unavailable.  Ilya has done most of the work preparing branches for
  upstream recently; you should not be surprised to hear from him if I
  am trapped in some internet-less wasteland or hit by a bus or
  something.  In the meantime, we'll work on getting him added to the
  kernel web of trust"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  MAINTAINERS: add secondary tree for ceph modules
  MAINTAINERS: update ceph entries
  libceph: treat sockaddr_storage with uninitialized family as blank
  libceph: enable ceph in a non-default network namespace

The FITRIM ioctl has the same arguments on 32-bit and 64-bit
architectures, so we can add it to the list of compatible ioctls and
drop it from compat_ioctl method of various filesystems.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ted Ts'o <tytso@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The firmware class uevent function accessed the "fw_priv->buf" buffer
without the proper locking and testing for NULL.  This is an old bug
(looks like it goes back to 2012 and commit 1244691c: "firmware
loader: introduce firmware_buf"), but for some reason it's triggering
only now in 4.2-rc1.

Shuah Khan is trying to bisect what it is that causes this to trigger
more easily, but in the meantime let's just fix the bug since others are
hitting it too (at least Ingo reports having seen it as well).
Reported-and-tested-by: NShuah Khan <shuahkh@osg.samsung.com>
Acked-by: NMing Lei <ming.lei@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reading page fault handler code I've noticed that under right
circumstances kernel would map anonymous pages into file mappings: if
the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated
on ->mmap(), kernel would handle page fault to not populated pte with
do_anonymous_page().

Let's change page fault handler to use do_anonymous_page() only on
anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not
shared.

For file mappings without vm_ops->fault() or shred VMA without vm_ops,
page fault on pte_none() entry would lead to SIGBUS.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Ceph kernel code is primarily developed in the github tree, and only
pushed to the korg tree before going to Linus.  If Sage is unavailable and
another maintainer needs to push something upstream, pull requests may
originate from the github tree instead of Sage's korg tree.
Signed-off-by: NSage Weil <sage@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

- The Ceph common code is used by both fs/ceph and drivers/block/rbd.
  Add a separate maintainers entry.

- Add Ilya as libceph maintainer and cephfs submaintainer.

- Attribute Documentation/ABI/testing/sysfs-bus-rbd to rbd.

- ceph-devel@vger.kernel.org should be L, not M in rbd entry.
Signed-off-by: NSage Weil <sage@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

addr_is_blank() should return true if family is neither AF_INET nor
AF_INET6.  This is what its counterpart entity_addr_t::is_blank_ip() is
doing and it is the right thing to do: in process_banner() we check if
our address is blank and if it is "learn" it from our peer.  As it is,
we never learn our address and always send out a blank one.  This goes
way back to ceph.git commit dd732cbfc1c9 ("use sockaddr_storage; and
some ipv6 support groundwork") from 2009.

While at at, do not open-code ipv6_addr_any() and use INADDR_ANY
constant instead of 0.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Grab a reference on a network namespace of the 'rbd map' (in case of
rbd) or 'mount' (in case of ceph) process and use that to open sockets
instead of always using init_net and bailing if network namespace is
anything but init_net.  Be careful to not share struct ceph_client
instances between different namespaces and don't add any code in the
!CONFIG_NET_NS case.

This is based on a patch from Hong Zhiguo <zhiguohong@tencent.com>.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Cayman does not have vce.  There were a few places in the
shared cayman/TV code where we were trying to do vce stuff.

v2: remove -ENOENT check
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise we try to clear BO_VAs without an address.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=91141Signed-off-by: NChristian König <christian.koenig@amd.com>
Test-by: hadack@gmx.de
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to allways add the VM clear duplicate of the BO_VA,
no matter what the old status was.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Test-by: hadack@gmx.de
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit ac913490.

We've fixed the underlying problem with cursors, so re-enable
this.

Reviewed-by: NGrigori Goronzy <greg@chown.ath.cx>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Everything is evicted from VRAM before suspend, so we need to make
sure all BOs are unpinned and re-pinned after resume. Fixes broken
mouse cursor after resume introduced by commit b9729b17.

[Michel Dänzer: Add pinning BOs on resume]

v2:
[Alex Deucher: merge cursor unpin into fb unpin loop]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100541
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in radeon_crtc_cursor_set2, and use
radeon_crtc->cursor_addr in radeon_set_cursor.

This fixes radeon_cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.

Cc: stable@vger.kernel.org
Reviewed-by: NGrigori Goronzy <greg@chown.ath.cx>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently pdd is validate after dereferencing it, which is
not correct, Thus validate pdd before its first use.
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Stolen gets trashed during hibernation, so storing contexts there
is not a very good idea. On my IVB machines this leads to a totally
dead GPU on resume. A reboot is required to resurrect it. So let's
not store contexts where they will get trampled.

This reverts commit 149c86e7.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The old style of memory interleaving swizzled upto the end of the
first even bank of memory, and then used the remainder as unswizzled on
the unpaired bank - i.e. swizzling is not constant for all memory. This
causes problems when we try to migrate memory and so the kernel prevents
migration at all when we detect L-shaped inconsistent swizzling.
However, this issue also extends to userspace who try to manually detile
into memory as the swizzling for an individual page is unknown (it
depends on its physical address only known to the kernel), userspace
cannot correctly swizzle objects.

v2: Mark the global swizzling as unknown rather than adjust the value
reported to userspace.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pull power management and ACPI updates from Rafael Wysocki:
 "These are fixes on top of the previous PM+ACPI pull requests
  (including one fix for a 4.1 regression) and two commits adding
  _CLS-based device enumeration support to the ACPI core and the ATA
  subsystem that waited for the latest ACPICA changes to be merged.

  Specifics:

   - Fix for an ACPI resources management regression introduced during
     the 4.1 cycle (that unfortunately went into -stable) effectively
     reverting the bad commit along with the recent fixups on top of it
     and using an alternative approach to address the underlying issue
     (Rafael J Wysocki).

   - Fix for a memory leak and an incorrect return value in an error
     code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J
     Wysocki).

   - Fix for a leftover dangling pointer in an error code path in the
     new wakeup IRQ support code (Rafael J Wysocki).

   - Fix to prevent infinite loops (due to errors in other places) from
     happening in the core generic PM domains support code (Geert
     Uytterhoeven).

   - Hibernation documentation update/clarification (Uwe Geuder).

   - Support for _CLS-based device enumeration in the ACPI core and in
     the ATA subsystem (Suravee Suthikulpanit)"

* tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / wakeirq: Avoid setting power.wakeirq too hastily
  ata: ahci_platform: Add ACPI _CLS matching
  ACPI / scan: Add support for ACPI _CLS device matching
  PM / hibernate: clarify resume documentation
  PM / Domains: Avoid infinite loops in attach/detach code
  ACPI / LPSS: Fix up acpi_lpss_create_device()
  ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage

Pull arch/tile fix from Chris Metcalf:
 "This fix eliminates a "section mismatch" warning caused by the new
  __ex_table checking code in modpost"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  modpost: work correctly with tile coldtext sections

Pull module fix from Rusty Russell:
 "Single fix: missing rbtree removal in the module load failure path.
  Easy to trigger with bad params.

  Thanks to Peter Zijlstra and Arthur Marsh for going around on this
  one"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Fix load_module() error path

The tilegx and tilepro compilers use .coldtext for their unlikely
executed text section name, so an __attribute__((cold)) function
will (when compiled with higher optimization levels) land in
the .coldtext section.

Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS
so we don't get warnings about referencing such a section in an
__ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c
so that it uses plain ".coldtext" instead of ".coldtext.memcpy".
The latter naming is a relic of an earlier use of -ffunction-sections,
which we no longer use by default.
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>

The load_module() error path frees a module but forgot to take it out
of the mod_tree, leaving a dangling entry in the tree, causing havoc.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: NArthur Marsh <arthur.marsh@internode.on.net>
Tested-by: NArthur Marsh <arthur.marsh@internode.on.net>
Fixes: 93c2e105 ("module: Optimize __module_address() using a latched RB-tree")
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The "if (pass_size > buf->total)" can underflow so I have changed the
type of size and pass_size to unsigned to avoid this problem.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer ASICs have more VRAM on average and allocating more GART as
well can have advantages. Also see commit edcd26e8.

Ideally, we should scale GART size based on actual VRAM size, but
that requires significant restructuring of initialization.

v2: extract small helper, apply to error paths
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This was regressed by commit 39e7f6f8, although I don't know of any
actual issues caused by it.

The storage domain is read without TTM locking now, but the lock
never helped to prevent any races.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't need to call the (expensive) radeon_bo_wait, checking the
fences via RCU is much faster. The reservation done by radeon_bo_wait
does not save us from any race conditions.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a translation of the patch ...
"drm/radeon: Handle irqs only based on irq ring, not irq status regs."
... for the vblank irq handling, to fix the same problem described
in that patch on the new driver.

Only compile tested due to lack of suitable hw.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
CC: Michel Dänzer <michel.daenzer@amd.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Trying to resolve issues with missed vblanks and impossible
values inside delivered kms pageflip completion events showed
that radeon's irq handling sometimes doesn't handle valid irqs,
but silently skips them. This was observed for vblank interrupts.

Although those irqs have corresponding events queued in the gpu's
irq ring at time of interrupt, and therefore the corresponding
handling code gets triggered by these events, the handling code
sometimes silently skipped processing the irq. The reason for those
skips is that the handling code double-checks for each irq event if
the corresponding irq status bits in the irq status registers
are set. Sometimes those bits are not set at time of check
for valid irqs, maybe due to some hardware race on some setups?

The problem only seems to happen on some machine + card combos
sometimes, e.g., never happened during my testing of different PC
cards of the DCE-2/3/4 generation a year ago, but happens consistently
now on two different Apple Mac cards (RV730, DCE-3, Apple iMac and
Evergreen JUNIPER, DCE-4 in a Apple MacPro). It also doesn't happen
at each interrupt but only occassionally every couple of
hundred or thousand vblank interrupts.

This results in XOrg warning messages like

"[  7084.472] (WW) RADEON(0): radeon_dri2_flip_event_handler:
Pageflip completion event has impossible msc 420120 < target_msc 420121"

as well as skipped frames and problems for applications that
use kms pageflip events or vblank events, e.g., users of DRI2 and
DRI3/Present, Waylands Weston compositor, etc. See also

https://bugs.freedesktop.org/show_bug.cgi?id=85203

After some talking to Alex and Michel, we decided to fix this
by turning the double-check for asserted irq status bits into a
warning. Whenever a irq event is queued in the IH ring, always
execute the corresponding interrupt handler. Still check the irq
status bits, but only to log a DRM_DEBUG message on a mismatch.

This fixed the problems reliably on both previously failing
cards, RV-730 dual-head tested on both crtcs (pipes D1 and D2)
and a triple-output Juniper HD-5770 card tested on all three
available crtcs (D1/D2/D3). The r600 and evergreen irq handling
is therefore tested, but the cik an si handling is only compile
tested due to lack of hw.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
CC: Michel Dänzer <michel.daenzer@amd.com>
CC: Alex Deucher <alexander.deucher@amd.com>
CC: <stable@vger.kernel.org> # v3.16+
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The "fix" in commit 0b08c5e5 ("audit: Fix check of return value of
strnlen_user()") didn't fix anything, it broke things.  As reported by
Steven Rostedt:

 "Yes, strnlen_user() returns 0 on fault, but if you look at what len is
  set to, than you would notice that on fault len would be -1"

because we just subtracted one from the return value.  So testing
against 0 doesn't test for a fault condition, it tests against a
perfectly valid empty string.

Also fix up the usual braindamage wrt using WARN_ON() inside a
conditional - make it part of the conditional and remove the explicit
unlikely() (which is already part of the WARN_ON*() logic, exactly so
that you don't have to write unreadable code.
Reported-and-tested-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Moore <pmoore@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since

commit 8c7b5ccb
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Tue Apr 21 17:13:19 2015 +0300

    drm/i915: Use atomic helpers for computing changed flags

we compute the plane state for a modeset before actually committing
any changes, which means crtc->active won't be correct yet. Looking at
future work in the modeset conversion targetting 4.3 the only places
where crtc_state->active isn't accurate is when disabling other CRTCs
than the one the modeset is for (when stealing connectors). Which
isn't the case here. And that's also confirmed by an audit, we do
unconditionally update crtc_state->active for the current pipe.

We also don't need to update any other plane check functions since we
only ever add the primary state to the modeset update right now.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>