- 31 1月, 2007 14 次提交
-
-
由 Geert Uytterhoeven 提交于
`make help' in the build tree doesn't show the help texts about the `headers_install' and `headers_check' targets because it looks for include/asm-$(ARCH)/Kbuild in the wrong place. Add the missing `$(srctree)' prefixes to fix this. Also move the printing of the default install path for the headers inside the `if/fi', where it belongs. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Engelhardt 提交于
Apparently this broke due to missing `struct inode' declaration. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Cc: Noah Watkins <nwatkins@ittc.ku.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
In blocks reallocation function sometimes does not update some of buffer_head::b_blocknr, which may and cause data damage. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
During ufs_trunc_direct which is subroutine of ufs::truncate, we try the first of all free parts of block and then whole blocks. But we calculate size of block's part to free in the wrong way. This may cause bad update of used blocks and fragments statistic, and you can got report that you have free 32T on 1Gb partition. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
These series of patches result of UFS1 write support stress testing, like running fsx-linux, untar and build linux kernel etc We pass from ufs::get_block_t to levels below: pointer to the current page, to make possible things like reallocation of blocks on the fly, and we also uses this pointer for indication, what actually we allocate data block or meta data block, but currently we make decision about what we allocate on the wrong level, this may and cause oops if we allocate blocks in some special order. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
The BUG in fuse_ctl_add_dentry() could be triggered if the control filesystem was unmounted and mounted again while one or more fuse filesystems were present. The fix is to reset the dentry counter in fuse_ctl_kill_sb(). Bug reported by Florent Mertens. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
Use __u8 rather than u8 in SIZE defines exported to userspace. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
Also remove {NFSD,RPC}_PARANOIA as having the defines doesn't really add anything. The printks covered by RPC_PARANOIA were triggered by badly formatted packets and so should be ratelimited. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
This patch adds missing newlines to dprintk's. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
In file included from include/linux/crypto.h:26, from crypto/cipher.c:17: include/linux/uaccess.h: In function 'pagefault_disable': include/linux/uaccess.h:18: error: dereferencing pointer to incomplete type include/linux/uaccess.h: In function 'pagefault_enable': include/linux/uaccess.h:33: error: dereferencing pointer to incomplete type video_buf need PCI. Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert P. J. Day 提交于
Fix what looks like an obvious typo in the file drivers/kvm/svm.c. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Acked-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
Make sure exported I2O ioctls utilize userspace safe types. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Stezenbach 提交于
Fix UML hostfs mknod(): userspace has differernt dev_t size and encoding than kernel, so extract major/minor and reencode using glibc makedev() macro. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Acked-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Serge E. Hallyn 提交于
Fix exit race by splitting the nsproxy putting into two pieces. First piece reduces the nsproxy refcount. If we dropped the last reference, then it puts the mnt_ns, and returns the nsproxy as a hint to the caller. Else it returns NULL. The second piece of exiting task namespaces sets tsk->nsproxy to NULL, and drops the references to other namespaces and frees the nsproxy only if an nsproxy was passed in. A little awkward and should probably be reworked, but hopefully it fixes the NFS oops. Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Daniel Hokka Zakrisson <daniel@hozac.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 1月, 2007 4 次提交
-
-
由 Mike Christie 提交于
Commit 85e04e37 cleaned up the timeout conversion, but did it exactly the wrong way. We get msecs from user space, and should convert them into jiffies. Not the other way around. Here is a fix with the overflow check sg.c has added in. This fixes DVD burnign with Nero. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> [ "you'll be wanting a comma there" - Andrew ] Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Fix commit ecdfc978 Not to put too fine a point on it, but in a nutshell... __set_page_dirty_buffers() | try_to_free_buffers() ---------------------------+--------------------------- | spin_lock(private_lock); | drop_bufers() | spin_unlock(private_lock); spin_lock(private_lock) | !page_has_buffers() | spin_unlock(private_lock) | SetPageDirty() | | cancel_dirty_page() oops! Signed-off-by: NNick Piggin <npiggin@suse.de> Acked-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Hemminger 提交于
Let's just backout the IRQ hack, and for those crap machines (like some Sony VAIO's) can just disable MSI with the module parameter. This reverts 44ade178. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Riss <frederic.riss@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This makes balance_dirty_page() always base its calculations on the amount of non-highmem memory in the machine, rather than try to base it on total memory and then falling back on non-highmem memory if the mapping it was writing wasn't highmem capable. This not only fixes a situation where two different writers can have wildly different notions about what is a "balanced" dirty state, but it also means that people with highmem machines don't run into an OOM situation when regular memory fills up with dirty pages. We used to try to handle the latter case by scaling down the dirty_ratio if the machine had a lot of highmem pages in page_writeback_init(), but it wasn't aggressive enough for some situations, and since basing the dirty ratio on highmem memory was broken in the first place, let's just stop doing so. (A variation of this theme fixed Justin Piszcz's OOM problem when copying an 18GB file on a RAID setup). Acked-by: NNick Piggin <nickpiggin@yahoo.com.au> Cc: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Neil Brown <neilb@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 1月, 2007 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix sys_pciconfig_iobase bus matching [POWERPC] PS3: add not complete comment to kconfig [POWERPC] ps3_free_io_irq: Fix inverted error check [POWERPC] PS3: Fix uniprocessor kernel build
-
- 28 1月, 2007 2 次提交
-
-
由 Benjamin Herrenschmidt 提交于
A stupid bug has been plaguing the sys_pciconfig_iobase on ppc64. It wasn't noticed until recently as it seems to not affect G5s but it's been causing problems running X servers on some other machines recently. The bus number matching was bogus. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add a comment to the PS3 config option to inform users that the current implementation is not yet complete. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 27 1月, 2007 19 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4]: Fix single-entry /proc/net/fib_trie output. [SELINUX]: Fix 2.6.20-rc6 build when no xfrm
-
由 Robert Olsson 提交于
When main table is just a single leaf this gets printed as belonging to the local table in /proc/net/fib_trie. A fix is below. Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Acked-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Yekkirala 提交于
This patch is an incremental fix to the flow_cache_genid patch for selinux that breaks the build of 2.6.20-rc6 when xfrm is not configured. Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Mirror the logic in the sun4u handler, we have to update both registers even when we branch out to window fault fixup handling. The way it works is that if we are in etrap processing a fault already, g4/g5 holds the original fault information. If we take a window spill fault while doing etrap, then we put the window spill fault info into g4/g5 and this is what the top-level fault handler ends up processing first. Then we retry the originally faulting instruction, and process the original fault at that time. This is all necessary because of how constrained the trap registers are in these code paths. These cases trigger very rarely, so even if there is some performance implication it's doesn't happen very often. In fact the rarity is why it took so long to trigger and find this particular bug. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 H. Peter Anvin 提交于
Add an official boot loader ID for Gujin. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Fasheh 提交于
Fix a bug which was introduced when I synced up ocfs2_fs.h with ocfs2-tools. We can't do u64/u32 in kernel. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32由 Linus Torvalds 提交于
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Update ATSTK1000 defconfig: Enable macb by default [AVR32] Export clear_page symbol
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: nf_conntrack_pptp: fix NAT setup of expected GRE connections [NETFILTER]: nf_nat_pptp: fix expectation removal [NETFILTER]: nf_nat: fix ICMP translation with statically linked conntrack [TCP]: Restore SKB socket owner setting in tcp_transmit_skb(). [AF_PACKET]: Check device down state before hard header callbacks. [DECNET]: Handle a failure in neigh_parms_alloc (take 2) [BNX2]: Fix 2nd port's MAC address. [TCP]: Fix sorting of SACK blocks. [AF_PACKET]: Fix BPF handling. [IPV4]: Fix the fib trie iterator to work with a single entry routing tables
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: Fix Maple PATA IRQ assignment. ahci: use 0x80 as wait stat value instead of 0xff sata_via: style clean up, no indirect method call in LLD ahci: fix endianness in spurious interrupt message libata-sff: Don't call bmdma_stop on non DMA capable controllers libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uli ahci: improve and limit spurious interrupt messages, take#3 sata_via: don't diddle with ATA_NIEN in ->freeze libata: set_mode, Fix the FIXME libata hpt3xn: Hopefully sort out the DPLL logic versus the vendor code libata cmd64x: whack into a shape that looks like the documentation
-
由 David Woodhouse 提交于
On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Before hardreset, ahci initialized stat part of received FIS area to 0xff to wait for the first D2H Reg FIS which would change the value to device ready state. This used to work but now libata considers status value of 0xff as device not present making this wait prone to failure. This patch makes ahci use 0x80 for the wait stat value instead of 0xff to fix the above problem. Signed-off-by: NTejun Heo <htejun@gmail.com> drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Call ata_bmdma_irq_clear() directly instead of through ap->ops->irq_clear() according to libata style guideline. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Fix endianness in spurious interrupt message. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Matt Domsch 提交于
Fix race when deleting an EFI variable and issuing another EFI command on the same variable. The removal of the variable from the efivars_list should be done in efivar_delete and not delayed until the kobject release. Furthermore, remove the item from the list at module unload time, and use list_for_each_entry_safe() rather than list_for_each_safe() for readability. Tested on ia64. Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Proposed patch to fix #5 in http://www.isec.pl/vulnerabilities/isec-0017-binfmt_elf.txt aka http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2004-1073 To reproduce, do * grab poc at the end of advisory. * add line "eph.p_memsz = 4096;" after "eph.p_filesz = 4096;" where first "4096" is something equal to or greater than 4096. * ./poc /usr/bin/sudo && ls -l Here I get with 2.6.20-rc5: -rw------- 1 ad ad 102400 2007-01-15 19:17 core ---s--x--x 2 root root 101820 2007-01-15 19:15 /usr/bin/sudo Check for MAY_READ like binfmt_misc.c does. Signed-off-by: NAlexey Dobriyan <adobriyan@openvz.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
raid5_mergeable_bvec tries to ensure that raid5 never sees a read request that does not fit within just one chunk. However as we must always accept a single-page read, that is not always possible. So when "in_chunk_boundary" fails, it might be unusual, but it is not a problem and printing a message every time is a bad idea. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
This fixes UML on hosts with non-standard VM splits. We had changed the config variable that controls UML behavior on such hosts, but not propogated the change everywhere. In particular, the values of STUB_CODE and STUB_DATA relied on the old variable. I also reformatted the HOST_VMSPLIT_3G help to make it more standard. Spotted by uml@flonatel.org. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Blaisorblade <blaisorblade@yahoo.it> Cc: Pravin <shindepravin@gmail.com> Cc: <uml@flonatel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
NFS can handle the case where invalidate_inode_pages2_range() fails, so the premise behind commit 8258d4a5 is now gone. Remove the WARN_ON_ONCE() which is causing users grief as we can see from http://bugzilla.kernel.org/show_bug.cgi?id=7826Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-