- 27 12月, 2015 1 次提交
-
-
由 Jenny Derzhavetz 提交于
Declare that we support remote invalidation in case we are: 1. using fastreg method 2. always registering memory Detect the invalidated rkey from the work completion info so we won't invalidate it locally. The spec mandates that we must not rely on the target remote invalidate our rkey so we must check it upon a receive (scsi response) completion. Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 24 12月, 2015 39 次提交
-
-
由 Sagi Grimberg 提交于
When we enable remote invalidate support we won't want to perform local invalidates at the same time we do today, but we still need to get new rkeys. So, decouple the rkey update from the local invalidate and tie it to memory reg instead. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jenny Derzhavetz 提交于
We'll use remote invalidate, according to negotiation result during connection establishment. If the initiator declared that it supports the remote invalidate exception and the local HCA supports IB_DEVICE_MEM_MGT_EXTENSIONS then the target will use IB_WR_SEND_WITH_INV with the correct rkey for the response. Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jenny Derzhavetz 提交于
iser target does not support zero based virtual addresses and send with invalidate, so it should declare that it doesn't. Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Sagi Grimberg 提交于
We don't need iser_proto.h anymore, remove it and move (non-protocol) declarations to ib_isert.h Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Sagi Grimberg 提交于
The iser RDMA_CM negotiation protocol is shared by the initiator and the target, so have a shared header for the defines and structure. Move relevant items from the initiator and target headers. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jenny Derzhavetz 提交于
This parameter is described as "is mr valid indicator". In other words, it indicates whether memory registration is valid or not. So intuitive values would be: mr_valid=True, when memory registration is valid and mr_valid=False otherwise. Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jenny Derzhavetz 提交于
When all the task data is sent as immediate data, we are allowed to use the local_dma_lkey as it is not sent to the wire. Signed-off-by: NJenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Sagi Grimberg 提交于
We have in iser iser_sg_to_page_vec which has exactly the same role as ib_sg_to_pages. Customize the page_vec to hold a fake MR so we can reuse ib_sg_to_pages. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Roi Dayan 提交于
Destroy workqueue on transport register error, also release kmem cache on workqueue allocation error. Signed-off-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Julia Lawall 提交于
This mmu_notifier_ops structure is never modified, so declare it as const, like the other mmu_notifier_ops structures. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Julia Lawall 提交于
The iser_reg_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Julia Lawall 提交于
The nes_cm_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bodong Wang 提交于
This patch will report the tx/rx checksum cap for raw qp via the query device results. Signed-off-by: NBodong Wang <bodong@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Convert kmalloc to be kmalloc_array to fix warnings below: WARNING: Prefer kmalloc_array over kmalloc with multiply + qp->sq.wrid = kmalloc(qp->sq.wqe_cnt * sizeof(u64), WARNING: Prefer kmalloc_array over kmalloc with multiply + qp->rq.wrid = kmalloc(qp->rq.wqe_cnt * sizeof(u64), WARNING: Prefer kmalloc_array over kmalloc with multiply + srq->wrid = kmalloc(srq->msrq.max * sizeof(u64), Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Failure in kmalloc memory allocations will throw a warning about it. Such warnings are not needed anymore, since in commit 0ef2f05c ("IB/mlx4: Use vmalloc for WR buffers when needed"), fallback mechanism from kmalloc() to __vmalloc() was added. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Eran Ben Elisha 提交于
In order to ensure IB spec atomic correctness in atomic operations, if HW is configured to host endianness, advertise IB_ATOMIC_HCA. if not, advertise IB_ATOMIC_NONE. Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Eran Ben Elisha 提交于
HW is capable of 2 requestor endianness modes for standard 8 Bytes atomic: BE (0x0) and host endianness (0x1). Read the supported modes from hca atomic capabilities and configure HW to host endianness mode if supported. Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Hariprasad S 提交于
The cxgb3_*_send() functions return NET_XMIT_ values, which are positive integers values. So don't treat positive return values as an error. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Hariprasad S 提交于
Enhances the t4_dev_status_page to pass the qid start and size attributes from iw_cxgb4 to libcxgb4. Bump the ABI Version to 3 -> To allow libcxgb4 to detect old drivers and revert to the old way of computing the qid ranges. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Dean Luick 提交于
It was found that when a process was rapidly sending MADs other processes could be hung in their unregister calls. This would happen when process A was injecting packets fast enough that the single threaded workqueue was never exiting ib_mad_completion_handler. Therefore when process B called flush_workqueue via the unregister call it would hang until process A stopped sending MADs. The fix is to periodically reschedule ib_mad_completion_handler after processing a large number of completions. The number of completions chosen was decided based on the defaults for the recv queue size. However, it was kept fixed such that increasing those queue sizes would not adversely affect fairness in the future. Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Add support of cross-channel functionality to mlx5 driver. This includes ability to ignore overrun for CQ which intended for cross-channel, export device capability and configure the QP to be sync master/slave queues. The cross-channel enabled QP supports combination of three possible properties: * WQE processing on the receive queue of this QP * WQE processing on the send queue of this QP * WQE are supported on the send queue Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
The cross-channel feature allows to execute WQEs that involve synchronization of I/O operations’ on different QPs. This capability enables to program complex flows with a single function call, hereby significantly reducing overhead associated with I/O processing. Cross-channel operations support is indicated by HCA capability information. The queue pairs can be configured to work as a “sync master queue” or “sync slave queues”. The added flags are: 1. Device capability flag IB_DEVICE_CROSS_CHANNEL for the devices that can perform cross-channel operations. 2. CQ property flag IB_CQ_FLAGS_IGNORE_OVERRUN to disable CQ overrun check. This check is useless in cross-channel scenario. 3. QP property flags to indicate if queues are slave or master: * IB_QP_CREATE_MANAGED_SEND indicates that posted send work requests will not be executed immediately and requires enabling. * IB_QP_CREATE_MANAGED_RECV indicates that posted receive work requests will not be executed immediately and requires enabling. * IB_QP_CREATE_CROSS_CHANNEL declares the QP to work in cross-channel mode. If IB_QP_CREATE_MANAGED_SEND and IB_QP_CREATE_MANAGED_RECV are not provided, this QP will be sync master queue, else it will be sync slave. Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Modify enum ib_device_cap_flags such that other patches which add new enum values pass strict checkpatch.pl checks. Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
In order to read the HCA's current cycles register, we need to map it to user-space. Add support to map this register via mmap command. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NMoshe Lazer <moshel@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
Pass hca_core_clock_offset to user-space is mandatory in order to let the user-space read the free-running clock register from the right offset in the memory mapped page. Passing this value is done by changing the vendor's command and response of init_ucontext to be in extensible form. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NMoshe Lazer <moshel@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
Reporting the hca_core_clock (in kHZ) and the timestamp_mask in query_device extended verb. timestamp_mask is used by users in order to know what is the valid range of the raw timestamps, while hca_core_clock reports the clock frequency that is used for timestamps. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NMoshe Lazer <moshel@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
Extending core and vendor verb commands require us to check that the unknown part of the user's given command is all zeros. Adding ib_is_udata_cleared in order to do so. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
In order to create a CQ that supports timestamp, mlx5 needs to support the extended create CQ command with the timestamp flag. Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Lameter 提交于
Check if the extended counters are available and if so create the proper extended and additional counters. Signed-off-by: NChristoph Lameter <cl@linux.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NHal Rosenstock <hal@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Lameter 提交于
Add the attr_id on port_table_attribute since we will have to add a different port_table_attribute for the extended attribute soon. Reviewed-by: NHal Rosenstock <hal@mellanox.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Lameter 提交于
Create a new function to retrieve performance management data from the existing code in get_pma_counter(). Reviewed-by: NHal Rosenstock <hal@mellanox.com> Signed-off-by: NChristoph Lameter <cl@linux.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Or Gerlitz 提交于
The driver was written originally by Roland Dreier, currently there's no official maintainer. Yishai steps in as maintainer. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@kernel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Or Gerlitz 提交于
Matan and Leon step in as co-maintainers to replace Eli Cohen who wrote and maintained the core and IB drivers. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBart Van Assche <bvanassche@sandisk.com> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Hellwig 提交于
And simplify the calling convention for full-memory registrations. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Hellwig 提交于
Just pass and address/size pair instead of an ib_phys_buf array. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Christoph Hellwig 提交于
Fold simplified versions of build_phys_page_list and iwch_register_phys_mem into iwch_get_dma_wr now that no other callers are left. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-