- 17 12月, 2009 40 次提交
-
-
由 Dmitri Vorobiev 提交于
Several static uninitialized variables are used in the scope of __init functions but are themselves not marked as __initdata. This patch is to put those variables to where they belong and to reduce the memory footprint a little bit. Also, a couple of lines with spaces instead of tabs were fixed. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/698/Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
That thread "MIPS: Add option to pass return address location to _mcount" from "David Daney <ddaney@caviumnetworks.com>" have added a new option -mmcount-ra-address to gcc(4.5) for MIPS to transfer the location of the return address to _mcount. Benefit from this new feature, function graph tracer on MIPS will be easier and safer to hijack the return address of the kernel function, which will save some overhead and make the whole thing more reliable. In this patch, at first, try to enable the option -mmcount-ra-address in arch/mips/Makefile with cc-option, if gcc support it, it will be enabled, otherwise, no side effect. and then, we need to support this new option of gcc 4.5 and also support the old gcc versions. with _mcount in the old gcc versions, it's not easy to get the location of return address(tracing: add function graph tracer support for MIPS), so, we do it in a C function: ftrace_get_parent_addr(ftrace.c), but with -mmcount-ra-address, only several instructions need to get what we want, so, I put into asm(mcount.S). and also, as the $12(t0) is used by -mmcount-ra-address for transferring the localtion of return address to _mcount, we need to save it into the stack and restore it when enabled dynamic function tracer, 'Cause we have called "ftrace_call" before "ftrace_graph_caller", which may destroy $12(t0). (Thanks to David for providing that -mcount-ra-address and giving the idea of KBUILD_MCOUNT_RA_ADDRESS, both of them have made the whole thing more beautiful!) Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/681/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
A new option -mmcount-ra-address for gcc 4.5 have been sent by David Daney <ddaney@caviumnetworks.com> in the thread "MIPS: Add option to pass return address location to _mcount", which help to record the location of the return address(ra) for the function graph tracer of MIPS to hijack the return address easier and safer. that option used the $12(t0) register by default, so, we reserve it for it, and use t1,t2,t3 instead of t0,t1,t2. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/680/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
When remove the -fno-omit-frame-pointer, gcc will not save the frame pointer for us, we need to save one ourselves. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/679/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This patch make function graph tracer work with dynamic function tracer. To share the source code of dynamic function tracer(MCOUNT_SAVE_REGS), and avoid restoring the whole saved registers, we need to restore the ra register from the stack. (NOTE: This not work with 32bit! need to ensure why!) Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/678/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
The implementation of function graph tracer for MIPS is a little different from X86. in MIPS, gcc(with -pg) only transfer the caller's return address(at) and the _mcount's return address(ra) to us. For the kernel part without -mlong-calls: move at, ra jal _mcount For the module part with -mlong-calls: lui v1, hi16bit_of_mcount addiu v1, v1, low16bit_of_mcount move at, ra jal _mcount Without -mlong-calls, if the function is a leaf, it will not save the return address(ra): ffffffff80101298 <au1k_wait>: ffffffff80101298: 67bdfff0 daddiu sp,sp,-16 ffffffff8010129c: ffbe0008 sd s8,8(sp) ffffffff801012a0: 03a0f02d move s8,sp ffffffff801012a4: 03e0082d move at,ra ffffffff801012a8: 0c042930 jal ffffffff8010a4c0 <_mcount> ffffffff801012ac: 00020021 nop so, we can hijack it directly in _mcount, but if the function is non-leaf, the return address is saved in the stack. ffffffff80133030 <copy_process>: ffffffff80133030: 67bdff50 daddiu sp,sp,-176 ffffffff80133034: ffbe00a0 sd s8,160(sp) ffffffff80133038: 03a0f02d move s8,sp ffffffff8013303c: ffbf00a8 sd ra,168(sp) ffffffff80133040: ffb70098 sd s7,152(sp) ffffffff80133044: ffb60090 sd s6,144(sp) ffffffff80133048: ffb50088 sd s5,136(sp) ffffffff8013304c: ffb40080 sd s4,128(sp) ffffffff80133050: ffb30078 sd s3,120(sp) ffffffff80133054: ffb20070 sd s2,112(sp) ffffffff80133058: ffb10068 sd s1,104(sp) ffffffff8013305c: ffb00060 sd s0,96(sp) ffffffff80133060: 03e0082d move at,ra ffffffff80133064: 0c042930 jal ffffffff8010a4c0 <_mcount> ffffffff80133068: 00020021 nop but we can not get the exact stack address(which saved ra) directly in _mcount, we need to search the content of at register in the stack space or search the "s{d,w} ra, offset(sp)" instruction in the text. 'Cause we can not prove there is only a match in the stack space, so, we search the text instead. as we can see, if the first instruction above "move at, ra" is not a store instruction, there should be a leaf function, so we hijack the at register directly via putting &return_to_handler into it, otherwise, we search the "s{d,w} ra, offset(sp)" instruction to get the stack offset, and then the stack address. we use the above copy_process() as an example, we at last find "ffbf00a8", 0xa8 is the stack offset, we plus it with s8(fp), that is the stack address, we hijack the content via writing the &return_to_handler in. If with -mlong-calls, since there are two more instructions above "move at, ra", so, we can move the pointer to the position above "lui v1, hi16bit_of_mcount". Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/677/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This patch add a new section for MIPS to record the block of the hardirq handling for function graph tracer(print_graph_irq) via adding the __irq_entry annotation to the the entrypoints of the hardirqs(the block with irq_enter()...irq_exit()). Thanks goes to Steven & Frederic Weisbecker for their feedbacks. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/676/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
With dynamic function tracer, by default, _mcount is defined as an "empty" function, it returns directly without any more action . When enabling it in user-space, it will jump to a real tracing function(ftrace_caller), and do the real job for us. Differ from the static function tracer, dynamic function tracer provides two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the tracing of some indicated kernel functions(set_ftrace_filter). In the -v4 version, the implementation of this support is basically the same as X86 version does: _mcount is implemented as an empty function and ftrace_caller is implemented as a real tracing function respectively. But in this version, to support module tracing with the help of -mlong-calls in arch/mips/Makefile: MODFLAGS += -mlong-calls. The stuff becomes a little more complex. We need to cope with two different type of calling to _mcount. For the kernel part, the calling to _mcount(result of "objdump -hdr vmlinux"). is like this: 108: 03e0082d move at,ra 10c: 0c000000 jal 0 <fpcsr_pending> 10c: R_MIPS_26 _mcount 10c: R_MIPS_NONE *ABS* 10c: R_MIPS_NONE *ABS* 110: 00020021 nop For the module with -mlong-calls, it looks like this: c: 3c030000 lui v1,0x0 c: R_MIPS_HI16 _mcount c: R_MIPS_NONE *ABS* c: R_MIPS_NONE *ABS* 10: 64630000 daddiu v1,v1,0 10: R_MIPS_LO16 _mcount 10: R_MIPS_NONE *ABS* 10: R_MIPS_NONE *ABS* 14: 03e0082d move at,ra 18: 0060f809 jalr v1 In the kernel version, there is only one "_mcount" string for every kernel function, so, we just need to match this one in mcount_regex of scripts/recordmcount.pl, but in the module version, we need to choose one of the two to match. Herein, I choose the first one with "R_MIPS_HI16 _mcount". and In the kernel verion, without module tracing support, we just need to replace "jal _mcount" by "jal ftrace_caller" to do real tracing, and filter the tracing of some kernel functions via replacing it by a nop instruction. but as we have described before, the instruction "jal ftrace_caller" only left 32bit length for the address of ftrace_caller, it will fail when calling from the module space. so, herein, we must replace something else. the basic idea is loading the address of ftrace_caller to v1 via changing these two instructions: lui v1,0x0 addiu v1,v1,0 If we want to enable the tracing, we need to replace the above instructions to: lui v1, HI_16BIT_ftrace_caller addiu v1, v1, LOW_16BIT_ftrace_caller If we want to stop the tracing of the indicated kernel functions, we just need to replace the "jalr v1" to a nop instruction. but we need to replace two instructions and encode the above two instructions oursevles. Is there a simpler solution? Yes! Here it is, in this version, we put _mcount and ftrace_caller together, which means the address of _mcount and ftrace_caller is the same: _mcount: ftrace_caller: j ftrace_stub nop ...(do real tracing here)... ftrace_stub: jr ra move ra, at By default, the kernel functions call _mcount, and then jump to ftrace_stub and return. and when we want to do real tracing, we just need to remove that "j ftrace_stub", and it will run through the two "nop" instructions and then do the real tracing job. what about filtering job? we just need to do this: lui v1, hi_16bit_of_mcount <--> b 1f (0x10000004) addiu v1, v1, low_16bit_of_mcount move at, ra jalr v1 nop 1f: (rec->ip + 12) In linux-mips64, there will be some local symbols, whose name are prefixed by $L, which need to be filtered. thanks goes to Steven for writing the mips64-specific function_regex. In a conclusion, with RISC, things becomes easier with such a "stupid" trick, RISC is something like K.I.S.S, and also, there are lots of "simple" tricks in the whole ftrace support, thanks goes to Steven and the other folks for providing such a wonderful tracing framework! Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/675/Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
MIPS and some other architectures need this argument to handle big/little endian respectively. Signed-off-by: NWu Zhangjin <wuzj@lemote.com> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/674/Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
There is an exisiting common ftrace_test_stop_func() in kernel/trace/ftrace.c, which is used to check the global variable ftrace_trace_stop to determine whether stop the function tracing. This patch implepment the MIPS specific one to speedup the procedure. Thanks goes to Zhang Le for Cleaning it up. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/673/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to _mcount will be inserted into each kernel function. so, there is a possibility to trace the kernel functions in _mcount. This patch add the MIPS specific _mcount support for static function tracing. by default, ftrace_trace_function is initialized as ftrace_stub(an empty function), so, the default _mcount will introduce very little overhead. after enabling ftrace in user-space, it will jump to a real tracing function and do static function tracing for us. and -ffunction-sections is incompatible with -pg, so, disable it when ftracer is enabled. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Reviewed-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/672/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Gleixner 提交于
The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org To: LKML <linux-kernel@vger.kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Patchwork: http://patchwork.linux-mips.org/patch/661/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Loongson 2F supports CPU clock scaling. When put it into wait mode by setting the frequency as ZERO it will stay in this mode until an external interrupt wakes the CPU again. To enable clock scaling support, an external timer of a known stable rate is required. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones <davej@redhat.com>, Cc: Dominik Brodowski <linux@dominikbrodowski.net>, Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/660/ Patchwork: http://patchwork.linux-mips.org/patch/751/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This patch adds basic options for MIPS CPUFreq support. Since the cp0 timer's frequency is based on the processor clockrate it can not be used with CPUFReq; an additional external timer is required. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones <davej@redhat.com>, Cc: Dominik Brodowski <linux@dominikbrodowski.net>, Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/659/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
CPUFreq support for Loongson 2F requires an external timer. Because the frequency of the MIPS Timer is related to the CPU frequency which itself is variable another timer of constant frequency is required. Export the mfgpt0 counter disable / enable operations for the coming suspend support to suspend / resume the timer. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones <davej@redhat.com>, Cc: Dominik Brodowski <linux@dominikbrodowski.net>, Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/658/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Add a new machtype and kernel options for the Lynloong. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/657/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Kernel support for this machine is almost the same as Fuloong 2F; the only difference is that it uses the serial port provided by Loongson 2F processor as Yeeloong 2F does. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/656/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David VomLehn 提交于
Add the Cisco Powertv cable settop box to the MIPS tree. This platform is based on a MIPS 24Kc processor with various devices integrated on the same ASIC. There are multiple models of this box, with differing configuration but the same kernel runs across the product line. Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/132/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Akinobu Mita 提交于
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/637/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Lemote Loongson 2F family machines need an external interrupt to wake the system from the suspend mode. For YeeLoong 2F and Mengloong 2F setup the keyboard interrupt as the wakeup interrupt. The new Fuloong 2F and LingLoong 2F have a button to directly send an interrupt to the CPU so there is no need to setup an interrupt. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: linux-pm@lists.linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/630/Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This patch add basic suspend support for loongson2f family machines, loongson2f have a specific feature: when we set it's frequency to ZERO, it will go into a wait mode, and then can be waked up by the external interrupt. so, if we setup suitable interrupts before putting it into wait mode, we will be able wake it up whenever we want via sending the relative interrupts to it. These interrupts are board-specific, Yeeloong2F use the keyboard interrupt and SCI interrupt, but LingLoong and Fuloong2F use the interrupts connected to the processors directly. and BTW: some old LingLoong and FuLoong2F have no such interrupts connected, so, there is no way to wake them up from suspend mode. and therefore, please do not enable the kernel support for them. The board-specific support will be added in the coming patches. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: linux-pm@lists.linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/629/Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Loongson2f support video acceleration. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/624/ Patchwork: http://patchwork.linux-mips.org/patch/625/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This patch adds two new kernel options: CPU_SUPPORTS_CPUFREQ and CPU_SUPPORTS_ADDRWINCFG to describe the new features of Loongons 2F and replaces the several ugly #if clauses by them. These two options will be utilized by the future loongson revisions and related drivers such as the coming Loongson 2F CPUFreq driver. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Add default config file for Lemote Loongson 2F family machines. The resulting kernel image can be shared between Fuloong 2F, Yeeloong 2F and other Lemote Loongson 2F family machines. If you are using an old PMON, and not using a 2f box, please add a new command line argument in the boot.cfg. For example, add this argument for 8.9inches notebook: machtype=lemote-yeeloong-2f-8.9inches or machtype=8.9 More information from arch/mips/loongson/common/machtype.c. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Fuloong 2F, Yeeloong 2F and Menglong 2F have different reset / shutdown logic. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
The generic i8259_irq() will make kernel hang on booting, so Loongson 2F needs its own polling method. IP6 is shared by the bonito interrupt and perfcounter interrupts. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
PCI support for the Fuloong 2E and Lemote Loongson 2F family machines is mostly identical with the exception of CS5536 support. Rename ops-fuloong2e.c to ops-loongson2.c then add the CS5536 support to share most of the source code among Loongson machines. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Lemote Loongson 2F family machines use CS5536 as their south bridge and need these lowlevel interfaces to access the devices on CS5536. Virtualize the legacy devices on CS5536 as PCI devices. This way users can access the CS5536 PCI config space directly as a normal multi-function PCI 2.2 device. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Currently rtclib is not available on Loongson family machines but the legacy RTC driver works well on them. Deselect RTC_LIB to allow the legacy RTC driver to be selected. The rtclib patch series http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=a91e34bf2595157830d599cb66becd52247b1819.1257383766.git.wuzhangjin%40gmail.com or, in patchworks: http://patchwork.linux-mips.org/patch/570/ http://patchwork.linux-mips.org/patch/571/ http://patchwork.linux-mips.org/patch/572/ is eventually going to switch Lemote platforms to rtclib. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Add a new kernel option for Lemote Loongson 2F family machines. Lemote loongson2f family machines utilize the 2f revision of loongson processor and the AMD CS5536 south bridge. Family members include Fuloong 2F mini PC, Yeeloong 2F notebook, LingLoong all-in-one PC and others. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Loongson 2F has built-in DDR2 and PCI-X controller. The PCI-X controller has a programming interface similiar to the the FPGA northbridge used on Loongson 2E. The main differences between Loongson 2E and Loongson 2F include: 1. Loongson 2F has an extra address window configuration module, which is used to map CPU address space to DDR or PCI address space, or map the PCI-DMA address space to DDR or LIO address space. 2. Loongson 2F supports 8 levels of software configurable CPu frequency which can be configured in the LOONGSON_CHIPCFG0 register. The coming cpufreq and standby support are based on this feature. Loongson.h abstracts the modules and corresponding methods are abstracted. Add other Loongson-2F-specific source code including gcc 4.4 support, PCI memory space, PCI IO space, DMA address. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
In Loongson2f IP6 is shared by bonito and perfcounters so we need to avoid do_IRQ for perfcounter when the interrupt is from bonito. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
To share the same kernel image amon different machines we have added the machtype command line support. In the old serial port implementation the UART base address is hardcoded as a macro in machine.h which breaks with machtype, so change that to discover the address dynamically. Also move the initialization of the UART base address to uart_base.c to avoid remapping twice for early_printk.c and serial.c. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/581/ Patchwork: http://patchwork.linux-mips.org/patch/682/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
To choose code for different machines by the value of machtype it needs to be initialized as early as possible. So move initialization of mips_machtype to prom_init(). Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
On SMP systems, the collection of statistics can cause cache line bouncing in the lines associated with the counters. Also there are races incrementing the counters on multiple CPUs. To fix both problems, we collect the statistics in per-CPU variables, and add them up in the debugfs read operation. As a test I ran the LTP float_bessel test on a 12 CPU Octeon system. Without CONFIG_DEBUG_FS : 2602 seconds. With CONFIG_DEBUG_FS: 2640 seconds. With non-cpu-local atomic statistics: 14569 seconds. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Addinitrd has been superseded by initramfs ages ago. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
Enable hibernation support by default. Also enable sparsemem to avoid the hibernation failures with flatmem and save memory wasted by flatmem. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
The built-in Loongson 2E/2F northbridge in is bonito64-compatible but not identical with it. To avoid influencing the original bonito64 support and make the loongson support more maintainable, it's better to separate the Bonito64 code from the Loongson code. This also prepares the kernel for the coming Loongson 2f machines family support. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com, Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
This patch add serial port support for all of the existing loongson family machines. most of the board specific part are put in serial.c, and the base address of the serial ports are defined as macros in machine.h for sharing it between serial.c and early_printk.c Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wu Zhangjin 提交于
The uart_base variable here is not a physical address, so, we replace it by unsigned char *. Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-