Per device data such as brightness belongs to the indivdual device
and should therefore be separate from the the backlight operation
function pointers. This patch splits the two types of data and
allows simplifcation of some code.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Move the setting/unsetting of pmac_backlight into the
backlight core instead of doing it in each driver.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Improve backlight selection for fbdev drivers
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

fb_info->bl_mutex is badly thought out and the backlight class doesn't
need it if the framebuffer/backlight register/unregister order is
consistent, particularly after the backlight locking fixes.

Fix the drivers to use the order:

backlight_device_register()
register_framebuffer()
unregister_framebuffer()
backlight_device_unregister()

and turn bl_mutex into a lock for the bl_curve data only.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

The backlight core listens for blanking events and triggers a
backlight_update_status call so these extra calls are not
needed and can be removed.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Remove uneeded update_status call from chipsfb.c since the
backlight core now receives software blanking notifications
too.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

The backlight class wants notification whenever the console is blanked
but doesn't get this when hardware blanking fails and software blanking
is used. Changing FB_EVENT_BLANK to report both would be a behaviour
change which could confuse the console layer so add a new event for
software blanking and have the backlight class listen for both.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Currently its possible to build the backlight core as a module yet
compile the drivers into the kernel which gives missing symbols.

Fix.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

nvidia_bl_set_power isn't needed since the backlight class handles
this by receiving fb events itself and calling update_status so
remove it.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Convert internal semaphore to a mutex
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

backlight_device->sem has a very specific use as documented in the
header file. The external users of this are using it for a different
reason, to serialise access to the update_status() method.

backlight users were supposed to implement their own internal
serialisation of update_status() if needed but everyone is doing
things differently and incorrectly. Therefore add a global mutex to
take care of serialisation for everyone, once and for all.

Locking for get_brightness remains optional since most users don't
need it.

Also update the lcd class in a similar way.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Since people use this code as an example, clean it up to
to use platform_*_drvdata instead of a global variable.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Since people use this code as an example, clean it up to
to use platform_*_drvdata and remove an unneeded function.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Remove excessive numbers of (un)likely()s in the backlight core.

There are no hot paths in this code so rely on compiler to do
the right thing.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Remove uneeded owner field from backlight_properties structure.

Nothing uses it and it is unlikely that it will ever be used. The
backlight class uses other means to ensure that nothing references
unloaded code.

Based on a patch from Dmitry Torokhov <dtor@insightbb.com>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Fix error handling when registering new device
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Add control of LCD backlight for Frontpath ProGear HX1050+.
Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz
driver by M Schacht.
Signed-off-by: NMarcin Juszkiewicz <openembedded@hrw.one.pl>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Add myself as the backlight class/subsystem maintainer.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Cobalt: Fix UART I/O type
  [MIPS] Fixup copy_from_user_inatomic
  [MIPS] Fix struct sigcontext for N32 userland
  [MIPS] Make some __setup functions static
  [MIPS] Declare highstart_pfn, highend_pfn only if CONFIG_HIGHMEM=y
  [MIPS] Allow selection of KGDB only on platforms where it's supported.

The Cobalt UART is actually connected to memory resource area.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

From the 01408c49 log message:

The problem is that when we write to a file, the copy from userspace to
pagecache is first done with preemption disabled, so if the source
address is not immediately available the copy fails *and* *zeros* *the*
*destination*.

This is a problem because a concurrent read (which admittedly is an odd
thing to do) might see zeros rather that was there before the write, or
what was there after, or some mixture of the two (any of these being a
reasonable thing to see).

If the copy did fail, it will immediately be retried with preemption
re-enabled so any transient problem with accessing the source won't
cause an error.

The first copying does not need to zero any uncopied bytes, and doing
so causes the problem.  It uses copy_from_user_atomic rather than
copy_from_user so the simple expedient is to change copy_from_user_atomic
to *not* zero out bytes on failure.

< --- end cite --- >

This patch finally implements at least a not so pretty solution by
duplicating the relevant part of __copy_user.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The kernel use 64-bit for sc_regs[0], and both N32/N64 userland
expects it was 64-bit.  But size of 'long' on N32 is actually 32-bit.
So this definition make some confusion.  Use __u32 and __u64 for
N32/N64 sigcontext to get rid of this confusion.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This fixes some sparse warnings. ("warning: symbol 'foo' was not
declared. Should it be static?")
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Due to type confusion, when an nfsacl verison 2 'ACCESS' request
finishes and tries to clean up, it calls fh_put on entiredly the
wrong thing and this can cause an oops.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The broadcast functionality is only necessary when a local APIC is
available. Make the config switch depend on X86_LOCAL_APIC. This
resolves the mach-voyager breakage introduced by the tick managament
code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

powerpc gets:

init/main.c: In function `do_basic_setup':
init/main.c:714: warning: implicit declaration of function `init_irq_proc'

but we cannot include linux/irq.h in generic code.

Fix it by moving the declaration into linux/interrupt.h instead.

And make sure all code that defines init_irq_proc() is including
linux/interrupt.h.

And nuke an ifdef-in-C

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A user-specified get_nlinks may depend on other inode attributes.

Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: NErez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: NJosef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The BUG_ON() in tick_nohz_stop_sched_tick() triggers on some boxen.
Remove the BUG_ON and print information about the pending softirq
to allow better debugging of the problem.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a CPU is needed for RCU the tick has to continue even when it was
stopped before.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] machzwd warning fix

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Update defconfigs
  [MIPS] Support for several more SNI RM models.
  [MIPS] Include <asm/bugs> to for declaration of check_bugs32.
  [MIPS] Add external declaration of pagetable_init() to pgalloc.h
  [MIPS] Make kernel_thread_helper() static
  [MIPS] Make __declare_dbe_table static and avoid it getting optimized away
  [MIPS] Use MIPS R2 instructions for bitops.
  [MIPS] signals: Share even more code.
  [MIPS] Fix CONFIG_MIPS32_N32=y CONFIG_MIPS32_O32=n build
  [MIPS] Iomap implementation.
  [MIPS] <asm/compat-signal.h> needs to include <asm/uaccess.h>.
  [MIPS] IP27: Fix warning.
  [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon/vt1211: Add probing of alternate config index port
  hwmon/f71805f: Fix a race condition
  hwmon/abituguru: Fix unchecked return status
  hwmon: New driver for the Analog Devices ADM1029
  hwmon/w83627ehf: Add support for the W83627DHG chip
  hwmon: Use subsys_initcall
  hwmon/lm70: Make lm70_remove a __devexit function
  hwmon: Cleanup a bogus legacy comment
  hwmon: Simplify the locking model of two drivers
  hwmon: Drop unused mutexes in two drivers
  hwmon/it87: Add PWM base frequency control

* git://git.infradead.org/mtd-2.6: (49 commits)
  [MTD] [NAND] S3C2412 fix hw ecc
  [MTD] [NAND] Work around false compiler warning in CAFÉ driver
  [JFFS2] printk warning fixes
  [MTD] [MAPS] ichxrom warning fix
  [MTD] [MAPS] amd76xrom warning fix
  [MTD] [MAPS] esb2rom warning fixes
  [MTD] [MAPS] ck804xrom warning fix
  [MTD] [MAPS] netsc520 warning fix
  [MTD] [MAPS] sc520cdp warning fix
  [MTD] [ONENAND] onenand_base warning fix
  [MTD] [NAND] eXcite nand flash driver
  [MTD] Improve heuristic for detecting wrong-endian RedBoot partition table
  [MTD] Fix RedBoot partition parsing regression harder.
  [MTD] [NAND] S3C2410: Hardware ECC correction code
  [JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND
  [MTD] Clarify OOB-operation interface comments
  [MTD] remove unused ecctype,eccsize fields from struct mtd_info
  [MTD] [NOR] Intel: remove ugly PROGREGION macros
  [MTD] [NOR] STAA: use writesize instead off eccsize to represent ECC block
  [MTD] OneNAND: Invalidate bufferRAM after erase
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: implement optional loose read cache
  9p: Use kthread_stop instead of sending a SIGKILL.

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] SCSI core: better initialization for sdev->scsi_level
  [SCSI] scsi_proc.c: display sdev->scsi_level correctly
  [SCSI] megaraid_sas: update version and author info
  [SCSI] megaraid_sas: return sync cache call with success
  [SCSI] megaraid_sas: replace pci_alloc_consitent with dma_alloc_coherent in ioctl path
  [SCSI] megaraid_sas: add bios_param in scsi_host_template
  [SCSI] megaraid_sas: do not process cmds if hw_crit_error is set
  [SCSI] scsi_transport.h should include scsi_device.h
  [SCSI] aic79xx: remove extra newline from info message
  [SCSI] scsi_scan.c: handle bad inquiry responses
  [SCSI] aic94xx: tie driver to the major number of the sequencer firmware
  [SCSI] lpfc: add PCI error recovery support
  [SCSI] megaraid: pci_module_init to pci_register_driver
  [SCSI] tgt: fix the user/kernel ring buffer interface
  [SCSI] sgiwd93: interfacing to wd33c93
  [SCSI] wd33c93: Fast SCSI with WD33C93B

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: remove obsolete setup parameters from input drivers
  Input: HIL - fix improper call to release_region()
  Input: hid-lgff - treat devices as joysticks unless told otherwise
  Input: HID - add support for Logitech Formula Force EX
  Input: gpio-keys - switch to common GPIO API
  Input: do not lock device when showing name, phys and uniq
  Input: i8042 - let serio bus suspend ports
  Input: psmouse - properly reset mouse on shutdown/suspend

* 'audit.b37' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] AUDIT_FD_PAIR
  [PATCH] audit config lockdown
  [PATCH] minor update to rule add/delete messages (ver 2)

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
  Documentation/kernel-docs.txt update.
  arch/cris: typo in KERN_INFO
  Storage class should be before const qualifier
  kernel/printk.c: comment fix
  update I/O sched Kconfig help texts - CFQ is now default, not AS.
  Remove duplicate listing of Cris arch from README
  kbuild: more doc. cleanups
  doc: make doc. for maxcpus= more visible
  drivers/net/eexpress.c: remove duplicate comment
  add a help text for BLK_DEV_GENERIC
  correct a dead URL in the IP_MULTICAST help text
  fix the BAYCOM_SER_HDX help text
  fix SCSI_SCAN_ASYNC help text
  trivial documentation patch for platform.txt
  Fix typos concerning hierarchy
  Fix comment typo "spin_lock_irqrestore".
  Fix misspellings of "agressive".
  drivers/scsi/a100u2w.c: trivial typo patch
  Correct trivial typo in log2.h.
  Remove useless FIND_FIRST_BIT() macro from cardbus.c.
  ...